Download or read book Functional Polymer Film Roll to roll Manufacturing by Field Assisted Alignment of Nanoparticles phases in Thickness z Direction written by Yuanhao Guo and published by . This book was released on 2016 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Roll-to-roll nanomanufacturing is the next generation processing technique with advantages of high throughput and low cost, beneficial for manufacturing functional materials for flexible electrons, medical device and filtration applications. Roll-to-roll processing combining external electric field to organize nanoparticles in polymer films provides a unique processing path fabricate the nanocomposites with directionally ordered structures which exhibit significantly enhanced properties in field direction.The first part of this study presents a simple, low cost and commercially viable method to manufacture multifunctional nanocomposites with directionally ordered structures. The manufacturing of poly(dimethylsiloxane) (PDMS) film with "Z" aligned graphite nanoparticles by application of electric field is achieved continuously on a roll-to-roll processing line. The "Z" aligned nanocomposite films exhibit significantly enhanced dielectric permittivity, electrical and thermal conductivity through the thickness direction. The second study develops a novel roll-to-roll processing method for "Z" alignment of barium titanate (BaTiO3) nanoparticles in polystyrene (PS)/toluene solution systems, which broadens the choice of polymers to use as matrix to manufacture functional films with anisotropic structure. This is accomplished by applying electric field to a two-layer solution film cast on a carrier: the top layer is a sacrificial layer contacting the electrode and the bottom one is the composite layer. The "Z" aligned nanocomposite films show substantially increased dielectric permittivity for enhancing the performance of capacitors.The third study proposes a three-layer wound dressing with "Z" aligned superabsorbent particles by using the processing method developed in previous study. This resulting wound dressing preferentially expands in thickness direction after absorbing water, thus reducing the lateral stress between the dressing and wound. The aligned wound dressings could achieve up to 33% smaller lateral expansion than the film with random particles. Compared to irregular shape particles, rod-like particles with higher aspect ratio are more effective to improve anisotropic swelling and reduce lateral expansion.The final study demonstrates the formation of dispersed and bicontinuous morphology of PS and PMMA blends with the interface coated by silica nanoparticles modified with PS-r-PMMA copolymer. The effect of the solvent evaporation rate, blend compositions, particle loading and size on the resulting morphology is systematically investigated. The vertical alignment of PMMA phase with dense nanoparticle coated interface by the application of electric field is investigated. The effect of dielectric constant of nanoparticles on their reorganization at the interface under electric field demonstrated.
Download or read book Functional Polymer Films 2 Volume Set written by Wolfgang Knoll and published by John Wiley & Sons. This book was released on 2013-02-12 with total page 1107 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very thin film materials have emerged as a highly interesting and useful quasi 2D-state functionality. They have given rise to numerous applications ranging from protective and smart coatings to electronics, sensors and display technology as well as serving biological, analytical and medical purposes. The tailoring of polymer film properties and functions has become a major research field. As opposed to the traditional treatise on polymer and resin-based coatings, this one-stop reference is the first to give readers a comprehensive view of the latest macromolecular and supramolecular film-based nanotechnology. Bringing together all the important facets and state-of-the-art research, the two well-structured volumes cover film assembly and depostion, functionality and patterning, and analysis and characterization. The result is an in-depth understanding of the phenomena, ordering, scale effects, fabrication, and analysis of polymer ultrathin films. This book will be a valuable addition for Materials Scientists, Polymer Chemists, Surface Scientists, Bioengineers, Coatings Specialists, Chemical Engineers, and Scientists working in this important research field and industry.
Download or read book Roll to Roll Manufacturing written by Jehuda Greener and published by John Wiley & Sons. This book was released on 2018-02-22 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: A single-volume resource featuring state-of-the art reviews of key elements of the roll-to-roll manufacturing processing methodology Roll-to-roll (R2R) manufacturing is an important manufacturing technology platform used extensively for mass-producing a host of film-type products in several traditional industries such as printing, silver-halide photography, and paper. Over the last two decades, some of the methodologies and know-how of R2R manufacturing have been extended and adapted in many new technology areas, including microelectronics, display, photovoltaics, and microfluidics. This comprehensive book presents the state-of-the-art unit operations of the R2R manufacturing technology, providing a practical resource for scientists, engineers, and practitioners not familiar with the fundamentals of R2R technology. Roll-to-Roll Manufacturing: Process Elements and Recent Advances reviews new developments in areas such as flexible glass, display, and photovoltaics and covers a number of process innovations implemented recently to extend and improve the capabilities of traditional R2R lines. It covers such topics as: coating and solidification processes, in-line vacuum deposition, drying, web handling and winding, polymer film substrates, novel hybrid composite films, flexible solar cells and more. Additionally, this book: Examines key elements (unit operations) of the R2R technology, and discusses how these elements are utilized and integrated to achieve desired process efficiencies in a host of applications. Illustrates several established and novel application areas where R2R processing is utilized in current or future products. Discusses process design methodology and key advantages of R2R manufacturing technology over batch or sheet-to-sheet operations. Roll-to-Roll Manufacturing: Process Elements and Recent Advances is an ideal book for undergraduate and graduate students in various science and engineering disciplines, as well as for scientists, engineers, and technical and business leaders associated in any way with the development, commercialization, and manufacture of a variety of film products.
Download or read book Polymer Thin Films written by Ophelia Kwan Chui Tsui and published by World Scientific. This book was released on 2008 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ch. 1. Block copolymer thin films / J.-Y. Wang, S. Park and T. P. Russell -- ch. 2. Equilibration of block copolymer films on chemically patterned surfaces / G. S. W. Craig, H. Kang and P. F. Nealey -- ch. 3. Structure formation and evolution in confined cylinder-forming block copolymers / G. J. A. Sevink and J. G. E. M. Fraaije -- ch. 4. Block copolymer lithography for magnetic device fabrication / J. Y. Cheng and C. A. Ross -- ch. 5. Hierarchical structuring of polymer nanoparticles by self-organization / M. Shimomura ... [et al.] -- ch. 6. Wrinkling polymers for surface structure control and functionality / E. P. Chan and A. J. Crosby -- ch. 7. Crystallization in polymer thin films: morphology and growth / R. M. Van Horn and S. Z. D. Cheng -- ch. 8. Friction at soft polymer surface / M. K. Chaudhury, K. Vorvolakos and D. Malotky -- ch. 9. Relationship between molecular architecture, large-strain mechanical response and adhesive performance of model, block copolymer-based pressure sensitive adhesives / C. Creton and K. R. Shull -- ch. 10. Stability and dewetting of thin liquid films / K. Jacobs, R. Seemann and S. Herminghaus -- ch. 11. Anomalous dynamics of polymer Films / O. K. C. Tsui.
Download or read book Multifunctional Polymer Nanocomposites written by Jinsong Leng and published by CRC Press. This book was released on 2010-12-21 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: The novel properties of multifunctional polymer nanocomposites make them useful for a broad range of applications in fields as diverse as space exploration, bioengineering, car manufacturing, and organic solar cell development, just to name a few. Presenting an overview of polymer nanocomposites, how they compare with traditional composites, and th
Download or read book Electrospun Nanofibers written by Mehdi Afshari and published by Woodhead Publishing. This book was released on 2016-09-13 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrospun Nanofibers covers advances in the electrospinning process including characterization, testing and modeling of electrospun nanofibers, and electrospinning for particular fiber types and applications. Electrospun Nanofibers offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science. Electrospinning is the most commercially successful process for the production of nanofibers and rising demand is driving research and development in this field. Rapid progress is being made both in terms of the electrospinning process and in the production of nanofibers with superior chemical and physical properties. Electrospinning is becoming more efficient and more specialized in order to produce particular fiber types such as bicomponent and composite fibers, patterned and 3D nanofibers, carbon nanofibers and nanotubes, and nanofibers derived from chitosan. Provides systematic and comprehensive coverage of the manufacture, properties, and applications of nanofibers Covers recent developments in nanofibers materials including electrospinning of bicomponent, chitosan, carbon, and conductive fibers Brings together expertise from academia and industry to provide comprehensive, up-to-date information on nanofiber research and development Offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science
Download or read book Micro and Nano Fabrication Technology written by Jiwang Yan and published by Springer. This book was released on 2018-07-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on the state-of-the-art micro/nanofabrication technologies for creating miniature structures with high precision. These multidisciplinary technologies include mechanical, electrical, optical, physical, and chemical methods, as well as hybrid processes, covering subtractive and additive material manufacturing, as well as net-shape manufacturing. The materials the volume deals with include metals, alloys, semiconductors, polymers, crystals, glass, ceramics, composites, and nanomaterials. The volume is composed of 30 chapters, which are grouped into five parts. Engaging with the latest research in the field, these chapters provide important perspectives on key topics, from process developments at the shop level to scientific investigations at the academic level, offering both experimental work and theoretical analysis. Moreover, the content of this volume is highly interdisciplinary in nature, with insights from not only manufacturing technology but also mechanical/material science, optics, physics, chemistry, and more.
Download or read book Resin Transfer Moulding for Aerospace Structures written by T. Kruckenberg and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Resin Transfer Moulding and other similar 'liquid moulding' manufacturing methods have been used to make non-structural composites for the last 35 years. However, in the last eight years these methods have become the subject of enormous interest by aerospace manufacturing companies. Resin Transfer Moulding for Aerospace Structures describes all aspects of Resin Transfer Moulding (RTM) for aerospace structures. Written by an international team of experts, from both industry and academia, it is a comprehensive work providing complete and detailed information on the process of RTM from theoretical modelling to practical experience. With subjects including manufacturing, tooling, fabric design and flow modelling all covered, this book is an invaluable up-to-the-minute reference source which provides the reader with a good understanding of RTM and its possible uses, especially for high performance applications. Resin Transfer Moulding for Aerospace Structures is an ideal guide for those in the aerospace and related industries, who want to understand and utilize RTM, as well as those directly involved in the RTM industry.
Download or read book Semiconductor Nanowires written by J Arbiol and published by Elsevier. This book was released on 2015-03-31 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor nanowires promise to provide the building blocks for a new generation of nanoscale electronic and optoelectronic devices. Semiconductor Nanowires: Materials, Synthesis, Characterization and Applications covers advanced materials for nanowires, the growth and synthesis of semiconductor nanowires—including methods such as solution growth, MOVPE, MBE, and self-organization. Characterizing the properties of semiconductor nanowires is covered in chapters describing studies using TEM, SPM, and Raman scattering. Applications of semiconductor nanowires are discussed in chapters focusing on solar cells, battery electrodes, sensors, optoelectronics and biology. Explores a selection of advanced materials for semiconductor nanowires Outlines key techniques for the property assessment and characterization of semiconductor nanowires Covers a broad range of applications across a number of fields
Download or read book Film Properties of Plastics and Elastomers written by Laurence W. McKeen and published by William Andrew. This book was released on 2012-04-25 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preface -- 1. Introduction to Plastics and Polymers -- 2. Chapter 2 - Introduction to the Mechanical, Thermal and Permeation Properties of Plastics and Elastomers -- 3. Production of films -- 4. Markets and Applications for films -- 5. Styrenic Plastics -- 6. Polyesters -- 8. Polyamides (Nylons) -- 9. Polyolefins -- 10. Polyvinyls & Acrylics -- 11. Fluoropolymers -- 12. High Temperature/High Performance Polymers -- 13. Elastomers and rubbers -- 14. Renewable Resource or biodegradable polymers -- Appendices -- Permeation Unit Conversion Factors -- Vapor Transmission rate Conversion factors.
Download or read book 3D Printing for Development in the Global South written by T. Birtchnell and published by Springer. This book was released on 2014-10-14 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: Birtchnell and Hoyle explore how printers, designs, materials and infrastructures all need to be 'just right' in order for meaningful social change to happen with appropriate scale. The 3D4D Challenge suggests 3D printing could reach scale in the Global South, even perhaps having the same impact as the mobile phone or microfinance in development.
Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. - Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials - Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms - Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies
Download or read book Nanofabrication written by Maria Stepanova and published by Springer Science & Business Media. This book was released on 2011-11-08 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intended to update scientists and engineers on the current state of the art in a variety of key techniques used extensively in the fabrication of structures at the nanoscale. The present work covers the essential technologies for creating sub 25 nm features lithographically, depositing layers with nanometer control, and etching patterns and structures at the nanoscale. A distinguishing feature of this book is a focus not on extension of microelectronics fabrication, but rather on techniques applicable for building NEMS, biosensors, nanomaterials, photonic crystals, and other novel devices and structures that will revolutionize society in the coming years.
Download or read book Chemical Solution Deposition of Functional Oxide Thin Films written by Theodor Schneller and published by Springer Science & Business Media. This book was released on 2014-01-24 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first text to cover all aspects of solution processed functional oxide thin-films. Chemical Solution Deposition (CSD) comprises all solution based thin- film deposition techniques, which involve chemical reactions of precursors during the formation of the oxide films, i. e. sol-gel type routes, metallo-organic decomposition routes, hybrid routes, etc. While the development of sol-gel type processes for optical coatings on glass by silicon dioxide and titanium dioxide dates from the mid-20th century, the first CSD derived electronic oxide thin films, such as lead zirconate titanate, were prepared in the 1980’s. Since then CSD has emerged as a highly flexible and cost-effective technique for the fabrication of a very wide variety of functional oxide thin films. Application areas include, for example, integrated dielectric capacitors, ferroelectric random access memories, pyroelectric infrared detectors, piezoelectric micro-electromechanical systems, antireflective coatings, optical filters, conducting-, transparent conducting-, and superconducting layers, luminescent coatings, gas sensors, thin film solid-oxide fuel cells, and photoelectrocatalytic solar cells. In the appendix detailed “cooking recipes” for selected material systems are offered.
Download or read book Materials and Mechanical Engineering written by Guo Long Ruan and published by Trans Tech Publications Ltd. This book was released on 2014-02-19 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the International Workshop on Materials and Mechanical Engineering (WMME 2013), November 20-22, 2013, Xianning, China. The 57 papers are grouped as follows: I. Research and Processing of Materials, II. Mechanical Science and Engineering
Download or read book Nanomaterials for 2D and 3D Printing written by Shlomo Magdassi and published by John Wiley & Sons. This book was released on 2017-06-06 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to paint a complete picture of the challenges of processing functional nanomaterials for printed electronics devices, and additive manufacturing fabrication processes. Following an introduction to printed electronics, the book focuses on various functional nanomaterials available, including conducting, semi-conducting, dielectric, polymeric, ceramic and tailored nanomaterials. Subsequent sections cover the preparation and characterization of such materials along with their formulation and preparation as inkjet inks, as well as a selection of applications. These include printed interconnects, passive and active modules, as well as such high-tech devices as solar cells, transparent electrodes, displays, touch screens, sensors, RFID tags and 3D objects. The book concludes with a look at the future for printed nanomaterials. For all those working in the field of printed electronics, from entrants to specialized researchers, in a number of disciplines ranging from chemistry and materials science to engineering and manufacturing, in both academia and industry.
Download or read book Solution Processing of Inorganic Materials written by David Mitzi and published by John Wiley & Sons. This book was released on 2008-12-22 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the materials set to revolutionize the electronics industry The search for electronic materials that can be cheaply solution-processed into films, while simultaneously providing quality device characteristics, represents a major challenge for materials scientists. Continuous semiconducting thin films with large carrier mobilities are particularly desirable for high-speed microelectronic applications, potentially providing new opportunities for the development of low-cost, large-area, flexible computing devices, displays, sensors, and solar cells. To date, the majority of solution-processing research has focused on molecular and polymeric organic films. In contrast, this book reviews recent achievements in the search for solution-processed inorganic semiconductors and other critical electronic components. These components offer the potential for better performance and more robust thermal and mechanical stability than comparable organic-based systems. Solution Processing of Inorganic Materials covers everything from the more traditional fields of sol-gel processing and chemical bath deposition to the cutting-edge use of nanomaterials in thin-film deposition. In particular, the book focuses on materials and techniques that are compatible with high-throughput, low-cost, and low-temperature deposition processes such as spin coating, dip coating, printing, and stamping. Throughout the text, illustrations and examples of applications are provided to help the reader fully appreciate the concepts and opportunities involved in this exciting field. In addition to presenting the state-of-the-art research, the book offers extensive background material. As a result, any researcher involved or interested in electronic device fabrication can turn to this book to become fully versed in the solution-processed inorganic materials that are set to revolutionize the electronics industry.
