Download or read book Fuel Cycle Scenario Definition Evaluation and Trade offs written by J. D. Smith and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This report aims to clarify many of the issues being discussed within the AFCI program, including Inert Matrix Fuel (IMF) versus Mixed Oxide (MOX) fuel, single-pass versus multi-pass recycling, thermal versus fast reactors, potential need for transmutation of technetium and iodine, and the value of separating cesium and strontium. It documents most of the work produced by INL, ANL, and SNL personnel under their Simulation, Evaluation, and Trade Study (SETS) work packages during FY2005 and the first half of FY2006. This report represents the first attempt to calculate a full range of metrics, covering all four AFCI program objectives - waste management, proliferation resistance, energy recovery, and systematic management/economics/safety - using a combination of "static" calculations and a system dynamic model, DYMOND. In many cases, we examine the same issue both dynamically and statically to determine the robustness of the observations. All analyses are for the U.S. reactor fleet. This is a technical report, not aimed at a policy-level audience. A wide range of options are studied to provide the technical basis for identifying the most attractive options and potential improvements. Option improvement could be vital to accomplish before the AFCI program publishes definitive cost estimates. Information from this report will be extracted and summarized in future policy-level reports. Many dynamic simulations of deploying those options are included. There are few "control knobs" for flying or piloting the fuel cycle system into the future, even though it is dark (uncertain) and controls are sluggish with slow time response: what types of reactors are built, what types of fuels are used, and the capacity of separation and fabrication plants. Piloting responsibilities are distributed among utilities, government, and regulators, compounding the challenge of making the entire system work and respond to changing circumstances. We identify four approaches that would increase our ability to pilot the fuel cycle system: (1) have a recycle strategy that could be implemented before the 2030-2050 approximate period when current reactors retire so that replacement reactors fit into the strategy, (2) establish an option such as multi-pass blended-core IMF as a downward plutonium control knob and accumulate waste management benefits early, (3) establish fast reactors with flexible conversion ratio as a future control knob that slowly becomes available if/when fast reactors are added to the fleet, and (4) expand exploration of blended assemblies and cores, which appear to have advantages and agility. Initial results suggest multi-pass full-core MOX appears to be a less effective way than multi-pass blended core IMF to manage the fuel cycle system because it requires higher TRU throughput while more slowly accruing waste management benefits. Single-pass recycle approaches for LWRs (we did not study the VHTR) do not meet AFCI program objectives and could be considered a "dead end". Fast reactors appear to be effective options but a significant number of fast reactors must be deployed before the benefit of such strategies can be observed.

Download or read book Nuclear Power written by Pavel Tsvetkov and published by BoD – Books on Demand. This book was released on 2011-09-09 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: We are fortunate to live in incredibly exciting and incredibly challenging time. Energy demands due to economic growth and increasing population must be satisfied in a sustainable manner assuring inherent safety, efficiency and no or minimized environmental impact. These considerations are among the reasons that lead to serious interest in deploying nuclear power as a sustainable energy source. At the same time, catastrophic earthquake and tsunami events in Japan resulted in the nuclear accident that forced us to rethink our approach to nuclear safety, design requirements and facilitated growing interests in advanced nuclear energy systems. This book is one in a series of books on nuclear power published by InTech. It consists of six major sections housing twenty chapters on topics from the key subject areas pertinent to successful development, deployment and operation of nuclear power systems worldwide. The book targets everyone as its potential readership groups - students, researchers and practitioners - who are interested to learn about nuclear power.

Download or read book The Chemistry of the Actinide and Transactinide Elements Set Vol 1 6 written by L.R. Morss and published by Springer Science & Business Media. This book was released on 2010-10-21 with total page 4511 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fourth edition of "The Chemistry of the Actinide and Transactinide Elements" comprises all chapters in volumes 1 through 5 of the third edition (published in 2006) plus a new volume 6. To remain consistent with the plan of the first edition, “ ... to provide a comprehensive and uniform treatment of the chemistry of the actinide [and transactinide] elements for both the nuclear technologist and the inorganic and physical chemist,” and to be consistent with the maturity of the field, the fourth edition is organized in three parts. The first group of chapters follows the format of the first and second editions with chapters on individual elements or groups of elements that describe and interpret their chemical properties. A chapter on the chemical properties of the transactinide elements follows. The second group, chapters 15-26, summarizes and correlates physical and chemical properties that are in general unique to the actinide elements, because most of these elements contain partially-filled shells of 5f electrons whether present as isolated atoms or ions, as metals, as compounds, or as ions in solution. The third group, chapters 27-39, focuses on specialized topics that encompass contemporary fields related to actinides in the environment, in the human body, and in storage or wastes. Two appendices at the end of volume 5 tabulate important nuclear properties of all actinide and transactinide isotopes. Volume 6 (Chapters 32 through 39) consists of new chapters that focus on actinide species in the environment, actinide waste forms, nuclear fuels, analytical chemistry of plutonium, actinide chalcogenide and hydrothermal synthesis of actinide compounds. The subject and author indices and list of contributors encompass all six volumes.

Download or read book The Future of Nuclear Fuel Cycle written by and published by . This book was released on 2011 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In this analysis we have presented a method that provides insight into future fuel cycle alternatives by clarifying the complexity of choosing an appropriate fuel cycle in the context of the distribution of burdens and benefits between generations. The current nuclear power deployment practices, together with three future fuel cycles were assessed."--Page 227.

Download or read book Trade off Analytics written by Gregory S. Parnell and published by John Wiley & Sons. This book was released on 2016-10-25 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents information to create a trade-off analysis framework for use in government and commercial acquisition environments This book presents a decision management process based on decision theory and cost analysis best practices aligned with the ISO/IEC 15288, the Systems Engineering Handbook, and the Systems Engineering Body of Knowledge. It provides a sound trade-off analysis framework to generate the tradespace and evaluate value and risk to support system decision-making throughout the life cycle. Trade-off analysis and risk analysis techniques are examined. The authors present an integrated value trade-off and risk analysis framework based on decision theory. These trade-off analysis concepts are illustrated in the different life cycle stages using multiple examples from defense and commercial domains. Provides techniques to identify and structure stakeholder objectives and creative, doable alternatives Presents the advantages and disadvantages of tradespace creation and exploration techniques for trade-off analysis of concepts, architectures, design, operations, and retirement Covers the sources of uncertainty in the system life cycle and examines how to identify, assess, and model uncertainty using probability Illustrates how to perform a trade-off analysis using the INCOSE Decision Management Process using both deterministic and probabilistic techniques Trade-off Analytics: Creating and Exploring the System Tradespace is written for upper undergraduate students and graduate students studying systems design, systems engineering, industrial engineering and engineering management. This book also serves as a resource for practicing systems designers, systems engineers, project managers, and engineering managers. Gregory S. Parnell, PhD, is a Research Professor in the Department of Industrial Engineering at the University of Arkansas. He is also a senior principal with Innovative Decisions, Inc., a decision and risk analysis firm and has served as Chairman of the Board. Dr. Parnell has published more than 100 papers and book chapters and was lead editor of Decision Making for Systems Engineering and Management, Wiley Series in Systems Engineering (2nd Ed, Wiley 2011) and lead author of the Handbook of Decision Analysis (Wiley 2013). He is a fellow of INFORMS, the INCOSE, MORS, and the Society for Decision Professionals.

Download or read book Energy Abstracts for Policy Analysis written by and published by . This book was released on 1985 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Inventory of Federal Energy related Environment and Safety Research for written by and published by . This book was released on 1980 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 2003 Assessment of the Office of Naval Research s Marine Corps Science and Technology Program written by National Research Council and published by National Academies Press. This book was released on 2004-04-01 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Office of Naval Research (ONR) funds research across a broad range of scientific and engineering disciplines in support of the Navy and Marine Corps. To ensure that its investments are serving those ends and are of high quality, ONR requires each of its departments to undergo annual review. Since 1999, the Naval Expeditionary Warfare Department of ONR has requested that the NRC conduct these reviews. This report presents the results of the second review of the Marine Corps Science and Technology program. The first review was conducted in 2000. The 2003 assessment examines the overall Marine Corps S&T program, the littoral combat future naval capability, the core thrusts of the program, and basic research activities.

Download or read book Prospective Evaluation of Applied Energy Research and Development at DOE Phase Two written by National Research Council and published by National Academies Press. This book was released on 2007-08-17 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its inception in 1977 from an amalgam of federal authorities, the U.S. Department of Energy (DOE) has administered numerous programs aimed at developing applied energy technologies. In recent years, federal oversight of public expenditures has emphasized the integration of performance and budgeting. Notably, the Government Performance and Results Act (GPRA) was passed in 1993 in response to questions about the value and effectiveness of federal programs. GPRA and other mandates have led agencies to develop indicators of program performance and program outcomes. The development of indicators has been watched with keen interest by Congress, which has requested of the National Research Council (NRC) a series of reports using quantitative indicators to evaluate the effectiveness of applied energy research and development (R&D). The first such report took a retrospective view of the first 3 years of DOE R&D programs on fossil energy and energy efficiency. The report found that DOE-sponsored research had netted large commercial successes, such as advanced refrigerator compressors, electronic lighting ballasts, and emission control technology for flue gas desulfurization. However, some programs were judged to be costly failures in which large R&D expenditures did not result in a commercial energy technology. A follow-up NRC committee was assigned the task of adapting the methodology to the assessment of the future payoff of continuing programs. Evaluating the outcome of R&D expenditures requires an analysis of program costs and benefits. Doing so is not a trivial matter. First, the analysis of costs and benefits must reflect the full range of public benefits that are envisioned, accounting for environmental and energy security impacts as well as economic effects. Second, the analysis must consider how likely the research is to succeed and how valuable the research will be if successful. Finally, the analysis must consider what might happen if the government did not support the project: Would some non-DOE entity undertake it or an equivalent activity that would produce some or all of the benefits of government involvement? This second report continues to investigate the development and use of R&D outcome indicators and applies the benefits evaluation methodology to six DOE R&D activities. It provides further definition for the development of indicators for environmental and security benefits and refines the evaluation process based on its experience with the six DOE R&D case studies.

Download or read book Northeastern Regional Powerplant Conversion written by and published by . This book was released on 1981 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Inventory of Federal Energy related Environment and Safety Research for FY 1979 written by and published by . This book was released on 1980 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thorium Fuel Cycle written by International Atomic Energy Agency and published by . This book was released on 2005 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a critical review of the thorium fuel cycle: potential benefits and challenges in the thorium fuel cycle, mainly based on the latest developments at the front end of the fuel cycle, applying thorium fuel cycle options, and at the back end of the thorium fuel cycle.

Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Life Cycle Assessment LCA of Environmental and Energy Systems written by Fabrizio Passarini and published by MDPI. This book was released on 2021-04-01 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: The transition towards renewable energy sources and “green” technologies for energy generation and storage is expected to mitigate the climate emergency in the coming years. However, in many cases, this progress has been hampered by our dependency on critical materials or other resources that are often processed at high environmental burdens. Yet, many studies have shown that environmental and energy issues are strictly interconnected and require a comprehensive understanding of resource management strategies and their implications. Life cycle assessment (LCA) is among the most inclusive analytical techniques to analyze sustainability benefits and trade-offs within complex systems and, in this Special Issue, it is applied to assess the mutual influences of environmental and energy dimensions. The selection of original articles, reviews, and case studies addressed covers some of the main driving applications for energy requirements and greenhouse gas emissions, including power generation, bioenergy, biorefinery, building, and transportation. An insightful perspective on the current topics and technologies, and emerging research needs, is provided. Alone or in combination with integrative methodologies, LCA can be of pivotal importance and constitute the scientific foundation on which a full system understanding can be reached.

Download or read book Greenhouse Gas Control Technologies written by B. Eliasson and published by Elsevier. This book was released on 1999-05-20 with total page 1225 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings contain 270 papers outlining ideas and contributions to the new scientific, technical and political discipline of Greenhouse Gas (GHG) Control. The contributions were presented at the 4th International Conference on Greenhouse Gas Control Technologies (GHGT-4). It was the largest gathering of experts active in this new and fast-developing field.GHGT-4 was different from its predecessors in that it included all greenhouse gases, not only CO2, and all issues which could contribute to the mitigation of the greenhouse problem - technical, economic and political. The main focus was on practical solutions and real demonstrations of mitigation technology being planned and implemented today. It also addressed ways to increase the efficiency of power production and utilisation, and looked at proposals to encourage the development of renewable energy sources.During the Opening Session, 10 keynote addresses were heard from prominent personalities in government, industry and academia. To tackle this very inter-disciplinary problem and to achieve acceptable solutions, it is essential for industry and government to initiate intense dialogue and cooperation. Conferences like this can provide the opportunity for a meeting of minds between engineers and politicians in the face of global challenge. The primary attributes of this global challenge are manifold: the problem is global and international; it is inter-disciplinary, both in substance and approach; it covers technical, political and economic issues and involves government, science, industry and academia; it is complex and non-linear; and it will take the efforts of all parties involved to solve the problem.These proceedings contain ideas for starting demonstration projects and for making better use of the power and flexibility of market measures. They also show it is a problem we can influence and that there is a wealth of ideas. The challenge now is to find the right partners to put these ideas into action.

Download or read book Environment and Nuclear Energy written by Behram N. Kursunogammalu and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed from the Global Foundation's International Conference on Environment and Nuclear Energy, held in October 1997, this volume examines the impact of nuclear energy on regional and global environmental issues under a variety of scenarios. These include competition in deregulated energy environments, constraints levied upon use of fossil energy, and possible expansion of nuclear power into energy sectors beyond the generation of electricity, process heat, and fuels production. It also assesses the overall role of nuclear energy in meeting future energy needs arising from growing world populations and economic development.

Download or read book Life Cycle Technoeconomic Modeling written by Antonio Colmenar Santos and published by MDPI. This book was released on 2020-12-02 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to perform an impartial analysis to evaluate the implications of the environmental costs and impacts of a wide range of technologies and energy strategies. This information is intended to be used to support decision-making by groups, including researchers, industry, regulators, and policy-makers. Life cycle assessment (LCA) and technoeconomic analysis can be applied to a wide variety of technologies and energy strategies, both established and emerging. LCA is a method used to evaluate the possible environmental impacts of a product, material, process, or activity. It assesses the environmental impact throughout the life cycle of a system, from the acquisition of materials to the manufacture, use, and final disposal of a product. Technoeconomic analysis refers to cost evaluations, including production cost and life cycle cost. Often, in order to carry out technoeconomic analysis, researchers are required to obtain data on the performance of new technologies that operate on a very small scale in order to subsequently design configurations on a commercial scale and estimate the costs of such expansions. The results of the developed models help identify possible market applications and provide an estimate of long-term impacts. These methods, together with other forms of decision analysis, are very useful in the development and improvement of energy objectives, since they will serve to compare different decisions, evaluating their political and economic feasibility and providing guidance on potential financial and technological risks.