Download or read book NUREG CR written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1977 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Format and Content of the Safety Analysis Report for Nuclear Power Plants written by International Atomic Energy Agency and published by IAEA. This book was released on 2004 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide is intended primarily for use with land based stationary thermal nuclear power plants but it may, in parts, have a wider applicability to other nuclear facilities. It provides recommendations and guidance on the possible format and content of a SAR in support of a request to the State regulatory body for authorization to construct and or operate a nuclear power plant. As such, it contains recommendations on meeting the requirements of Safety guide GS-R-1 "Legal and governmental infrastructure for nuclear, radioactive waste and transport safety" (2000, ISBN 9201008007)
Download or read book Condition Assessment of Aged Structures written by J K Paik and published by Elsevier. This book was released on 2014-01-23 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Any structural system in service is subject to age-related deterioration, leading to potential concerns regarding maintenance, health & safety, environmental and economic implications. Condition assessment of aged structures is an invaluable, single source of information on structural assessment techniques for marine and land-based structures such as ships, offshore installations, industrial plant and buildings. Topics covered include: - - Current practices and standards for structural condition assessment - - Fundamental mechanisms and advanced mathematical methods for predicting structural deterioration - - Residual strength assessment of deteriorated structures - - Inspection and maintenance of aged structures - - Reliability and risk assessment of aged structuresProfessionals from a broad range of disciplines will be able to gain a better understanding of current practices and standards for structural condition assessment or health monitoring, and what future trends might be. - Single source of information on structural assessment techniques for marine and land-based structures - Examines the residual strength and reliability of aged structures - Assesses current practices covering inspection, health monitoring and maintenance
Download or read book Seismic Fragility of Nuclear Power Plant Components written by Kamal K. Bandyopadhyay and published by . This book was released on 1986 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Regulatory Commission Issuances written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1979 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Power Reactor Events written by and published by . This book was released on 1985 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Maintenance of Process Instrumentation in Nuclear Power Plants written by H.M. Hashemian and published by Springer Science & Business Media. This book was released on 2006-11-09 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a training course for I and C maintenance engineers in power, process, chemical, and other industries. It summarizes all the scattered literature in this field. The book compiles 30 years of knowledge gained by the author and his staff in testing the I and C systems of nuclear power plants around the world. It focuses on process temperature and pressure sensors and the verification of these sensors’ calibration and response time.
Download or read book Implementation Strategies and Tools for Condition Based Maintenance at Nuclear Power Plants written by International Atomic Energy Agency and published by IAEA. This book was released on 2007 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a need to optimise the maintenance of nuclear power plants, both to improve reliability and increase competitiveness. The tendency is to move from preventative (time based) maintenance to one dependent on the condition of plant and its components. This publication collects and analyses proven condition based maintenance strategies and techniques in Member States as well as selected papers on maintenance optimisation.
Download or read book NRC Regulatory Guides written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1973 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of currently available electronic versions of NRC regulatory guides.
Download or read book Process Engineering and Industrial Management written by Jean-Pierre Dal Pont and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Engineering, the science and art of transforming raw materials and energy into a vast array of commercial materials, was conceived at the end of the 19th Century. Its history in the role of the Process Industries has been quite honorable, and techniques and products have contributed to improve health, welfare and quality of life. Today, industrial enterprises, which are still a major source of wealth, have to deal with new challenges in a global world. They need to reconsider their strategy taking into account environmental constraints, social requirements, profit, competition, and resource depletion. “Systems thinking” is a prerequisite from process development at the lab level to good project management. New manufacturing concepts have to be considered, taking into account LCA, supply chain management, recycling, plant flexibility, continuous development, process intensification and innovation. This book combines experience from academia and industry in the field of industrialization, i.e. in all processes involved in the conversion of research into successful operations. Enterprises are facing major challenges in a world of fierce competition and globalization. Process engineering techniques provide Process Industries with the necessary tools to cope with these issues. The chapters of this book give a new approach to the management of technology, projects and manufacturing. Contents Part 1: The Company as of Today 1. The Industrial Company: its Purpose, History, Context, and its Tomorrow?, Jean-Pierre Dal Pont. 2. The Two Modes of Operation of the Company – Operational and Entrepreneurial, Jean-Pierre Dal Pont. 3. The Strategic Management of the Company: Industrial Aspects, Jean-Pierre Dal Pont. Part 2: Process Development and Industrialization 4. Chemical Engineering and Process Engineering, Jean-Pierre Dal Pont. 5. Foundations of Process Industrialization, Jean-François Joly. 6. The Industrialization Process: Preliminary Projects, Jean-Pierre Dal Pont and Michel Royer. 7. Lifecycle Analysis and Eco-Design: Innovation Tools for Sustainable Industrial Chemistry, Sylvain Caillol. 8. Methods for Design and Evaluation of Sustainable Processes and Industrial Systems, Catherine Azzaro-Pantel. 9. Project Management Techniques: Engineering, Jean-Pierre Dal Pont. Part 3: The Necessary Adaptation of the Company for the Future 10. Japanese Methods, Jean-Pierre Dal Pont. 11. Innovation in Chemical Engineering Industries, Oliver Potier and Mauricio Camargo. 12. The Place of Intensified Processes in the Plant of the Future, Laurent Falk. 13. Change Management, Jean-Pierre Dal Pont. 14. The Plant of the Future, Jean-Pierre Dal Pont.
Download or read book Handbook of Essential Oils written by K. Husnu Can Baser and published by CRC Press. This book was released on 2009-12-28 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt: Egyptian hieroglyphs, Chinese scrolls, and Ayurvedic literature record physicians administering aromatic oils to their patients. Today society looks to science to document health choices and the oils do not disappoint. The growing body of evidence of their efficacy for more than just scenting a room underscores the need for production standards, quality control parameters for raw materials and finished products, and well-defined Good Manufacturing Practices. Edited by two renowned experts, the Handbook of Essential Oils covers all aspects of essential oils from chemistry, pharmacology, and biological activity, to production and trade, to uses and regulation. Bringing together significant research and market profiles, this comprehensive handbook provides a much-needed compilation of information related to the development, use, and marketing of essential oils, including their chemistry and biochemistry. A select group of authoritative experts explores the historical, biological, regulatory, and microbial aspects. This reference also covers sources, production, analysis, storage, and transport of oils as well as aromatherapy, pharmacology, toxicology, and metabolism. It includes discussions of biological activity testing, results of antimicrobial and antioxidant tests, and penetration-enhancing activities useful in drug delivery. New information on essential oils may lead to an increased understanding of their multidimensional uses and better, more ecologically friendly production methods. Reflecting the immense developments in scientific knowledge available on essential oils, this book brings multidisciplinary coverage of essential oils into one all-inclusive resource.
Download or read book Materials and Processes written by Barrie D. Dunn and published by Springer. This book was released on 2015-12-29 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to assist scientists and engineers select the ideal material or manufacturing process for particular applications; these could cover a wide range of fields, from light-weight structures to electronic hardware. The book will help in problem solving as it also presents more than 100 case studies and failure investigations from the space sector that can, by analogy, be applied to other industries. Difficult-to-find material data is included for reference. The sciences of metallic (primarily) and organic materials presented throughout the book demonstrate how they can be applied as an integral part of spacecraft product assurance schemes, which involve quality, material and processes evaluations, and the selection of mechanical and component parts. In this successor edition, which has been revised and updated, engineering problems associated with critical spacecraft hardware and the space environment are highlighted by over 500 illustrations including micrographs and fractographs. Space hardware captured by astronauts and returned to Earth from long durations in space are examined. Information detailed in the Handbook is applicable to general terrestrial applications including consumer electronics as well as high reliability systems associated with aeronautics, medical equipment and ground transportation. This Handbook is also directed to those involved in maximizing the relia bility of new materials and processes for space technology and space engineering. It will be invaluable to engineers concerned with the construction of advanced structures or mechanical and electronic sub-systems.
Download or read book Safety Aspects of Nuclear Power Plants in Human Induced External Events written by International Atomic Energy Agency and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides detailed guidelines for the safety assessment of nuclear power structures against mechanical impact, explosion and fire caused by human induced external events. It covers the characterization of loading, the assessment of structural integrity using both simplified methods and more elaborated methodologies, and the assessment of induced vibration. The acceptance criteria provided in the publication are for different failure modes: overall stability, overall bending and shear, local failure modes and induced vibrations. The process of analysing fire consequences is also included.
Download or read book Design Approaches for Solar Industrial Process Heat Systems written by Charles F. Kutscher and published by . This book was released on 1982 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems Water Reactors written by John H. Jackson and published by Springer. This book was released on 2018-12-20 with total page 2460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set represents a collection of papers presented at the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors. The purpose of this conference series is to foster an exchange of ideas about problems and their remedies in water-cooled nuclear power plants of today and the future. Contributions cover problems facing nickel-based alloys, stainless steels, pressure vessel and piping steels, zirconium alloys, and other alloys in water environments of relevance. Components covered include pressure boundary components, reactor vessels and internals, steam generators, fuel cladding, irradiated components, fuel storage containers, and balance of plant components and systems.
Download or read book Water Chemistry and Corrosion of Nuclear Power Plant Structural Materials written by V. G. Kritsky and published by . This book was released on 1999 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses structural material corrosion in coolant circuits, simulation of erosion corrosion of carbon and low-alloy steels, and simulation of stress corrosion. It also discusses corrosion of copper alloys, zirconium corrosion, optimization of water chemistry at operating nuclear power plants, coolant tendency to deposit hardness salts on heat-transfer surfaces, and inspection of metallic components. In addition, there are two appendixes, the first showing the chemical composition of steels, the second discussing solubility of iron, cobalt, zinc and copper corrosion products under conditions simulating power unit water chemistry.
Download or read book Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems Water Reactors written by John H Jackson and published by Springer. This book was released on 2017-10-25 with total page 1308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set represents a collection of papers presented at the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors. The purpose of this conference series is to foster an exchange of ideas about problems and their remedies in water-cooled nuclear power plants of today and the future. Contributions cover problems facing nickel-based alloys, stainless steels, pressure vessel and piping steels, zirconium alloys, and other alloys in water environments of relevance. Components covered include pressure boundary components, reactor vessels and internals, steam generators, fuel cladding, irradiated components, fuel storage containers, and balance of plant components and systems.
