Download or read book Fracture Behaviour in Steels and Weld Metals for Low Temperature Service written by Tadashi Ishikawa and published by . This book was released on 1989 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Brittle Fracture in Steel Structures written by G.M. Boyd and published by Elsevier. This book was released on 2016-01-22 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brittle Fracture in Steel Structures emphasizes the prevention of brittle fracture in structures fabricated from mild and low alloy steel operating at normal ambient temperatures. This book is divided into seven chapters. Chapter 1 provides the historical background and summarizes numerous case histories of brittle fractures. The nature of the phenomenon and factors that influence brittle fracture, including various methods of testing to determine the notch ductilities of different steels are described in Chapters 2 to 4. The fifth chapter elaborates the design considerations affecting the choice of steel for structural applications. Chapter 6 reviews the main methods for assessing the degree of notch ductility needed for different applications, while Chapter 7 deliberates practical procedures, recommended by the Navy Department Advisory Committee on Structural Steels, for assessing the suitability of different steels for particular applications. This publication is beneficial to metallurgists and welders intending to acquire knowledge of mild steel structures fabricated by welding from rolled steel plates and sections.
Download or read book The Dynamic Fracture Behaviour of Unalloyed and Low Alloy Steel Weld Metals written by Qianchu Liu and published by . This book was released on 1991 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Fracture Resistance and Structural Integrity written by V.V. Panasyuk and published by Newnes. This book was released on 2012-12-02 with total page 781 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 8th International Conference on Fracture (ICF8), held in Kyiv, Ukraine, attracted 550 delegates from 30 countries with over 700 papers presented. This volume contains a representative selection of 72 articles of the highest standard from internationally renowned experts in the field. Principal topics covered include: mechanics and criteria of fracture, stress-strain analysis in solids with cracks, physics and mechanics of fracture, dynamic fracture, environmental effects, temperature influence on fracture, advanced and special-purpose materials engineering applications of fracture mechanics, fracture mechanics and strength of welded joints and structures, testing techniques and failure diagnostics. For anyone working in fracture mechanics and the performance of materials, this volume provides a valuable snapshot of the major recent developments in the field.
Download or read book Review of Concepts and Status of Procedures for Fracture safe Design of Complex Welded Structures Involving Metals of Low to Ultra high Strength Levels written by William S. Pellini and published by . This book was released on 1965 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fracture Behavior of Several Ferritic Steels and Welded Joints at Room and Low Temperature written by H. Nakamura and published by . This book was released on 1969 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Brittle Fracture of Welded Plate written by William Joel Hall and published by . This book was released on 1967 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Welding Metallurgy and Weldability of Nickel Base Alloys written by John C. Lippold and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most up-to-date coverage of welding metallurgy aspects and weldability issues associated with Ni-base alloys Welding Metallurgy and Weldability of Nickel-Base Alloys describes the fundamental metallurgical principles that control the microstructure and properties of welded Ni-base alloys. It serves as a practical how-to guide that enables engineers to select the proper alloys, filler metals, heat treatments, and welding conditions to ensure that failures are avoided during fabrication and service. Chapter coverage includes: Alloying additions, phase diagrams, and phase stability Solid-solution strengthened Ni-base alloys Precipitation strengthened Ni-base alloys Oxide dispersion strengthened alloys and nickel aluminides Repair welding of Ni-base alloys Dissimilar welding Weldability testing High-chromium alloys used in nuclear power applications With its excellent balance between the fundamentals and practical problem solving, the book serves as an ideal reference for scientists, engineers, and technicians, as well as a textbook for undergraduate and graduate courses in welding metallurgy.
Download or read book Metallurgy of Basic Weld Metal written by G M Evans and published by Elsevier. This book was released on 1997-07-29 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes the results of over 20 years research completed this year at one of the world's premier consumable manufacturers and aimed at improving the properties of MMA electrodes for high quality applications. It examines the influence of some 17 elements and welding variables on the composition, microstructure and mechanical properties of the resulting weld metal. The often complex relationships discovered are sufficient to give a good understanding of the properties of weld metals produced by other arc welding processes.
Download or read book Fracture and Fracture Mechanics written by R. B. Tait and published by Elsevier. This book was released on 2013-10-22 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture and Fracture Mechanics: Case Studies contains the proceedings of the Second National Conference on Fracture, held at the University of the Witwatersrand in Johannesburg, South Africa on November 26-27, 1984. This book presents case studies in fracture and fracture mechanics and highlights the problems associated with fracture, failure analysis, and safe design in industries as diverse as mining, power generation, transport, petrochemical, and manufacturing. This book has 29 chapters divided into five sections and opens with a discussion on the role of professional complacency in bridge failures. The first section is devoted to failure investigation and covers topics ranging from failure analysis of a hydraulic retarder piston to the use of scanning electron microscopy in investigating tungsten carbide-cobalt fractured components. The second section deals with slow crack growth and considers an approach to assessing structural integrity and fatigue failures in vibrating equipment. Failures arising from repair welding and incomplete heat treatment are described. The remaining chapters explore fitness for purpose evaluation of fractures; the environmental effects of fractures; and case studies of failure prevention in industries such as petrochemical, power generation, and transportation. This monograph will be of interest to structural engineers, metallurgists, and materials scientists and technologists.
Download or read book Creep and Fracture in High Temperature Components written by European Creep Collaborative Committee and published by DEStech Publications, Inc. This book was released on 2005 with total page 1136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides information from around the world on creep in multiple high-temperature metals, alloys, and advanced materials.
Download or read book The Tensile Fracture Behaviour of the Weld Metal of BIS 812 EMA and Q1N Naval Construction Steels written by I. A. Burch and published by . This book was released on 1995 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Engineer s Reference Book written by A. Parrish and published by Elsevier. This book was released on 2014-05-19 with total page 1450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Engineer's Reference Book: 11th Edition presents a comprehensive examination of the use of Systéme International d' Unités (SI) metrication. It discusses the effectiveness of such a system when used in the field of engineering. It addresses the basic concepts involved in thermodynamics and heat transfer. Some of the topics covered in the book are the metallurgy of iron and steel; screw threads and fasteners; hole basis and shaft basis fits; an introduction to geometrical tolerancing; mechanical working of steel; high strength alloy steels; advantages of making components as castings; and basic theories of material properties. The definitions and classifications of refractories are fully covered. An in-depth account of the mechanical properties of non-ferrous materials is provided. Different fabrication techniques are completely presented. A chapter is devoted to description of tubes for water, gas, sanitation, and heating services. Another section focuses on the accountant's measure of productivity. The book can provide useful information to engineers, metallurgists, students, and researchers.
Download or read book Effect of Repeated Loads on the Low Temperature Fracture Behavior of Notched and Welded Plates written by William Herman Munse and published by . This book was released on 1968 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: The influence of repeated loadings on the susceptibility of weldments to fracture in a brittle manner was studied for an ABS-Class C steel. The test members consisted primarily of 12, 24 and 36 in. wide notched-and-welded specimens that, at low temperatures, have been known to provide low-stress brittle fractures. The repeated loads or loading history was found to affect the fracture behavior of the weldments. In all but one instance the fracture stresses obtained for the notched-and-welded wide plates were greater than the stresses to which the members were subjected during the repeated loadings. Furthermore, the repeated loadings appeared to eliminate the two-stage fractures observed in some of the tests of as-welded specimens. This latter condition is in general desirable, but only if the fracture stress is raised to a high-stress level. (Author).
Download or read book Creep Resistant Steels written by Fujio Abe and published by Elsevier. This book was released on 2008-03-14 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creep-resistant steels are widely used in the petroleum, chemical and power generation industries. Creep-resistant steels must be reliable over very long periods of time at high temperatures and in severe environments. Understanding and improving long-term creep strength is essential for safe operation of plant and equipment. This book provides an authoritative summary of key research in this important area.The first part of the book describes the specifications and manufacture of creep-resistant steels. Part two covers the behaviour of creep-resistant steels and methods for strengthening them. The final group of chapters analyses applications in such areas as turbines and nuclear reactors.With its distinguished editors and international team of contributors, Creep-resistant steels is a valuable reference for the power generation, petrochemical and other industries which use high strength steels at elevated temperatures. - Describes the specifications and manufacture of creep-resistant steels - Strengthening methods are discussed in detail - Different applications are analysed including turbines and nuclear reactors
Download or read book Bainite in Steels written by H.K.D.H. Bhadeshia and published by CRC Press. This book was released on 2019-04-15 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third edition of the book, much expanded to include and incorporate important developments in the subject over the last fifteen years. The book represents a comprehensive treatise on all aspects of the bainite transformation, from the choreography of atoms during the phase change to length scales that are typical of engineering applications. The alloy design that emerges from this explains the role of solute additions, and the pernicious effects of impurities such as hydrogen. The picture presented is self-consistent and therefore is able to guide the reader on the exploitation of theory to the design of some of the most exciting steels, including the world’s first bulk nanostructured metal.
Download or read book Elastic Plastic Fracture written by John D. Landes and published by ASTM International. This book was released on 1979 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt:
