Download or read book Foundations of Real Time Computing Scheduling and Resource Management written by André M. van Tilborg and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a selection of papers that focus on the state-of the-art in real-time scheduling and resource management. Preliminary versions of these papers were presented at a workshop on the foundations of real-time computing sponsored by the Office of Naval Research in October, 1990 in Washington, D.C. A companion volume by the title Foundations of Real-Time Computing: Fonnal Specifications and Methods complements this book by addressing many of the most advanced approaches currently being investigated in the arena of formal specification and verification of real-time systems. Together, these two texts provide a comprehensive snapshot of current insights into the process of designing and building real-time computing systems on a scientific basis. Many of the papers in this book take care to define the notion of real-time system precisely, because it is often easy to misunderstand what is meant by that term. Different communities of researchers variously use the term real-time to refer to either very fast computing, or immediate on-line data acquisition, or deadline-driven computing. This text is concerned with the very difficult problems of scheduling tasks and resource management in computer systems whose performance is inextricably fused with the achievement of deadlines. Such systems have been enabled for a rapidly increasing set of diverse end-uses by the unremitting advances in computing power per constant-dollar cost and per constant-unit-volume of space. End-use applications of deadline-driven real-time computers span a spectrum that includes transportation systems, robotics and manufacturing, aerospace and defense, industrial process control, and telecommunications.
Download or read book Foundations of Real Time Computing Formal Specifications and Methods written by André M. van Tilborg and published by Springer. This book was released on 2013-09-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a selection of papers that focus on the state-of the-art in formal specification and verification of real-time computing systems. Preliminary versions of these papers were presented at a workshop on the foundations of real-time computing sponsored by the Office of Naval Research in October, 1990 in Washington, D. C. A companion volume by the title Foundations of Real-Time Computing: Scheduling and Resource Management complements this hook by addressing many of the recently devised techniques and approaches for scheduling tasks and managing resources in real-time systems. Together, these two texts provide a comprehensive snapshot of current insights into the process of designing and building real time computing systems on a scientific basis. The notion of real-time system has alternative interpretations, not all of which are intended usages in this collection of papers. Different communities of researchers variously use the term real-time to refer to either very fast computing, or immediate on-line data acquisition, or deadline-driven computing. This text is concerned with the formal specification and verification of computer software and systems whose correct performance is dependent on carefully orchestrated interactions with time, e. g. , meeting deadlines and synchronizing with clocks. Such systems have been enabled for a rapidly increasing set of diverse end-uses by the unremitting advances in computing power per constant-dollar cost and per constant-unit-volume of space. End use applications of real-time computers span a spectrum that includes transportation systems, robotics and manufacturing, aerospace and defense, industrial process control, and telecommunications.
Download or read book Foundations of Real Time Computing Formal Specifications and Methods written by André M. van Tilborg and published by Springer. This book was released on 1991 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a selection of papers that focus on the state-of the-art in formal specification and verification of real-time computing systems. Preliminary versions of these papers were presented at a workshop on the foundations of real-time computing sponsored by the Office of Naval Research in October, 1990 in Washington, D. C. A companion volume by the title Foundations of Real-Time Computing: Scheduling and Resource Management complements this hook by addressing many of the recently devised techniques and approaches for scheduling tasks and managing resources in real-time systems. Together, these two texts provide a comprehensive snapshot of current insights into the process of designing and building real time computing systems on a scientific basis. The notion of real-time system has alternative interpretations, not all of which are intended usages in this collection of papers. Different communities of researchers variously use the term real-time to refer to either very fast computing, or immediate on-line data acquisition, or deadline-driven computing. This text is concerned with the formal specification and verification of computer software and systems whose correct performance is dependent on carefully orchestrated interactions with time, e. g. , meeting deadlines and synchronizing with clocks. Such systems have been enabled for a rapidly increasing set of diverse end-uses by the unremitting advances in computing power per constant-dollar cost and per constant-unit-volume of space. End use applications of real-time computers span a spectrum that includes transportation systems, robotics and manufacturing, aerospace and defense, industrial process control, and telecommunications.
Download or read book Foundations of Real Time Computing written by Andre M Van Tilborg and published by . This book was released on 1991-07-31 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Formal Methods for Real Time Computing written by Constance Heitmeyer and published by . This book was released on 1996-06-04 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on formal methods, this book offers a complete coverage of new developments with emphasis on practical application. Starting with a survey of formal methods for real-time systems, topics include program specification, formal methods, analyzing, and design of real-time systems. The book is essential reading for developers of safety critical systems and researchers in the field.
Download or read book Foundations of Real Time Computing Scheduling and Resource Management written by André M. van Tilborg and published by Springer Science & Business Media. This book was released on 1991-07-31 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a selection of papers that focus on the state-of the-art in real-time scheduling and resource management. Preliminary versions of these papers were presented at a workshop on the foundations of real-time computing sponsored by the Office of Naval Research in October, 1990 in Washington, D.C. A companion volume by the title Foundations of Real-Time Computing: Fonnal Specifications and Methods complements this book by addressing many of the most advanced approaches currently being investigated in the arena of formal specification and verification of real-time systems. Together, these two texts provide a comprehensive snapshot of current insights into the process of designing and building real-time computing systems on a scientific basis. Many of the papers in this book take care to define the notion of real-time system precisely, because it is often easy to misunderstand what is meant by that term. Different communities of researchers variously use the term real-time to refer to either very fast computing, or immediate on-line data acquisition, or deadline-driven computing. This text is concerned with the very difficult problems of scheduling tasks and resource management in computer systems whose performance is inextricably fused with the achievement of deadlines. Such systems have been enabled for a rapidly increasing set of diverse end-uses by the unremitting advances in computing power per constant-dollar cost and per constant-unit-volume of space. End-use applications of deadline-driven real-time computers span a spectrum that includes transportation systems, robotics and manufacturing, aerospace and defense, industrial process control, and telecommunications.
Download or read book Real Time Computing written by Alexander D. Stoyenko and published by Springer Science & Business Media. This book was released on 2013-12-14 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: NATO's Division of Scientific and Environmental Affairs sponsored this Advan ced Study Institute because it was felt to be timely to cover this important and challengjng subject for the first time in the framework of NATO's ASI programme. The significance of real-time systems in everyones' life is rapidly growing. The vast spectrum of these systems can be characterised by just a few examples of increasing complexity: controllers in washing machines, air traffic control systems, control and safety systems of nuclear power plants and, finally, future military systems like the Strategic Defense Initiative (SDI). The import ance of such systems for the well-being of people requires considerable efforts in research and development of highly reliable real-time systems. Furthermore, the competitiveness and prosperity of entire nations now depend on the early app lication and efficient utilisation of computer integrated manufacturing systems (CIM), of which real-time systems are an essential and decisive part. Owing to its key significance in computerised defence systems, real-time computing has also a special importance for the Alliance. The early research and development activities in this field in the 1960s and 1970s aimed towards improving the then unsatisfactory software situation. Thus, the first high-level real-time languages were defined and developed: RTL/2, Coral 66, Procol, LTR, and PEARL. In close connection with these language develop ments and with the utilisation of special purpose process control peripherals, the research on real-time operating systems advanced considerably.
Download or read book Real Time Database Systems written by Azer Bestavros and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the growing interest in Real-Time Database Systems, there is no single book that acts as a reference to academics, professionals, and practitioners who wish to understand the issues involved in the design and development of RTDBS. Real-Time Database Systems: Issues and Applications fulfills this need. This book presents the spectrum of issues that may arise in various real-time database applications, the available solutions and technologies that may be used to address these issues, and the open problems that need to be tackled in the future. With rapid advances in this area, several concepts have been proposed without a widely accepted consensus on their definitions and implications. To address this need, the first chapter is an introduction to the key RTDBS concepts and definitions, which is followed by a survey of the state of the art in RTDBS research and practice. The remainder of the book consists of four sections: models and paradigms, applications and benchmarks, scheduling and concurrency control, and experimental systems. The chapters in each section are contributed by experts in the respective areas. Real-Time Database Systems: Issues and Applications is primarily intended for practicing engineers and researchers working in the growing area of real-time database systems. For practitioners, the book will provide a much needed bridge for technology transfer and continued education. For researchers, this book will provide a comprehensive reference for well-established results. This book can also be used in a senior or graduate level course on real-time systems, real-time database systems, and database systems or closely related courses.
Download or read book Hard Real Time Computing Systems written by Giorgio C Buttazzo and published by Springer Science & Business Media. This book was released on 2007-08-19 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-time computing plays a crucial role in our society since an increasing num ber of complex systems rely, in part or completely, on processor control. Ex amples of applications that require real-time computing include nuclear power plants, railway switching systems, automotive electronics, air traffic control, telecommunications, robotics, and military systems. In spite of this large application domain, most of the current real-time systems are still designed and implemented using low-level programming and empirical techniques, without the support of a scientific methodology. This approach results in a lack of reliability, which in critical applications may cause serious environmental damage or even loss of life. This book is a basic treatise on real-time computing, with particular emphasis on predictable scheduling algorithms. The main objectives of the book are to introduce the basic concepts of real-time computing, illustrate the most sig nificant results in the field, and provide the basic methodologies for designing predictable computing systems useful in supporting critical control applica tions. The book is written for instructional use and is organized to enable readers without a strong knowledge of the subject matter to quickly grasp the material. Technical concepts are clearly defined at the beginning of each chapter, and algorithm descriptions are reinforced through concrete examples, illustrations, and tables.
Download or read book Real Time Database Systems written by Kam-Yiu Lam and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, tremendous research has been devoted to the design of database systems for real-time applications, called real-time database systems (RTDBS), where transactions are associated with deadlines on their completion times, and some of the data objects in the database are associated with temporal constraints on their validity. Examples of important applications of RTDBS include stock trading systems, navigation systems and computer integrated manufacturing. Different transaction scheduling algorithms and concurrency control protocols have been proposed to satisfy transaction timing data temporal constraints. Other design issues important to the performance of a RTDBS are buffer management, index accesses and I/O scheduling. Real-Time Database Systems: Architecture and Techniques summarizes important research results in this area, and serves as an excellent reference for practitioners, researchers and educators of real-time systems and database systems.
Download or read book Imprecise and Approximate Computation written by Swaminathan Natarajan and published by Springer. This book was released on 2007-08-26 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-time systems are now used in a wide variety of applications. Conventionally, they were configured at design to perform a given set of tasks and could not readily adapt to dynamic situations. The concept of imprecise and approximate computation has emerged as a promising approach to providing scheduling flexibility and enhanced dependability in dynamic real-time systems. The concept can be utilized in a wide variety of applications, including signal processing, machine vision, databases, networking, etc. For those who wish to build dynamic real-time systems which must deal safely with resource unavailability while continuing to operate, leading to situations where computations may not be carried through to completion, the techniques of imprecise and approximate computation facilitate the generation of partial results that may enable the system to operate safely and avert catastrophe. Audience: Of special interest to researchers. May be used as a supplementary text in courses on real-time systems.
Download or read book Real Time Systems written by Hermann Kopetz and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: 7. 6 Performance Comparison: ET versus TT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 7. 7 The Physical Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 Points to Remember . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 Bibliographic Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 Review Questions and Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 Chapter 8: The Time-Triggered Protocols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 8. 1 Introduction to Time-Triggered Protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 8. 2 Overview of the TTP/C Protocol Layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 8. 3 TheBasic CNI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 Internal Operation of TTP/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 8. 4 8. 5 TTP/A for Field Bus Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 Bibliographic Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Review Questions and Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Chapter 9: Input/Output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 9. 1 The Dual Role of Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194 9. 2 Agreement Protocol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196 9. 3 Sampling and Polling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198 9. 4 Interrupts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201 9. 5 Sensors and Actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 9. 6 Physical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 Bibliographic Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Review Questions and Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Chapter 10: Real-Time Operating Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 10. 1 Task Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 10. 2 Interprocess Communication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 10. 3 Time Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 10. 4 Error Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 10. 5 A Case Study: ERCOS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 Bibliographic Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 Review Questions and Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 Chapter 11: Real-Time Scheduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 11. 1 The Scheduling Problem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228 11. 2 The Adversary Argument. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229 11. 3 Dynamic Scheduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231 x TABLE OF CONTENTS 11. 4 Static Scheduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240 Bibliographic Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 Review Questions and Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 Chapter 12: Validation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245 12. 1 Building aConvincing Safety Case. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246 12. 2 Formal Methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248 12. 3 Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Download or read book Formal Methods for the Design of Real Time Systems written by Marco Bernardo and published by Springer. This book was released on 2004-12-07 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: A large class of computing systems can be specified and verified by abstracting away from the temporal aspects of their behavior. In real-time systems,instead, time issues become essential. Their correctness depends not only on which functions they can perform, but also on the action execution time. Due to their importance and design challenges, real-time systems have attracted the attention of a considerable number of computer scientists and engineers from various research areas. This volume collects a set of papers accompanying the lectures of the fourth edition of the International School on Formal Methods for the Design of Computer, Communication and Software Systems (SFM). The school addressed the use of formal methods in computer science as a prominent approach to the r- orous design of computer, communication and software systems. The main aim of the SFM series is to o?er a good spectrum of current research in foundations as well as applications of formal methods, which can be of help for graduate students and young researchers who intend to approach the field. SFM-04:RT was devoted to real-time systems. It covered formal models and languages for the specification,modeling,analysis,and verification of the seti- critical systems, the expressiveness of such models and languages, as well as supporting tools and related applications in different domains.
Download or read book Formal Methods and Hybrid Real Time Systems written by Cliff B. Jones and published by Springer. This book was released on 2007-09-04 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Festschrift volume is published to honour both Dines Bjørner and Zhou Chaochen on the occasion of their 70th birthdays. The volume includes 25 refereed papers by leading researchers, current and former colleagues, who congregated at a celebratory symposium held in Macao, China, in the course of the International Colloquium on Theoretical Aspects of Computing, ICTAC 2007. The papers cover a broad spectrum of subjects.
Download or read book Formal Techniques in Real Time and Fault Tolerant Systems written by Jan Vytopil and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: Formal Techniques in Real-Time and Fault-Tolerant Systems focuses on the state of the art in formal specification, development and verification of fault-tolerant computing systems. The term `fault-tolerance' refers to a system having properties which enable it to deliver its specified function despite (certain) faults of its subsystem. Fault-tolerance is achieved by adding extra hardware and/or software which corrects the effects of faults. In this sense, a system can be called fault-tolerant if it can be proved that the resulting (extended) system under some model of reliability meets the reliability requirements. The main theme of Formal Techniques in Real-Time and Fault-Tolerant Systems can be formulated as follows: how do the specification, development and verification of conventional and fault-tolerant systems differ? How do the notations, methodology and tools used in design and development of fault-tolerant and conventional systems differ? Formal Techniques in Real-Time and Fault-Tolerant Systems is divided into two parts. The chapters in Part One set the stage for what follows by defining the basic notions and practices of the field of design and specification of fault-tolerant systems. The chapters in Part Two represent the `how-to' section, containing examples of the use of formal methods in specification and development of fault-tolerant systems. The book serves as an excellent reference for researchers in both academia and industry, and may be used as a text for advanced courses on the subject.
Download or read book Deadline Scheduling for Real Time Systems written by John A. Stankovic and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many real-time systems rely on static scheduling algorithms. This includes cyclic scheduling, rate monotonic scheduling and fixed schedules created by off-line scheduling techniques such as dynamic programming, heuristic search, and simulated annealing. However, for many real-time systems, static scheduling algorithms are quite restrictive and inflexible. For example, highly automated agile manufacturing, command, control and communications, and distributed real-time multimedia applications all operate over long lifetimes and in highly non-deterministic environments. Dynamic real-time scheduling algorithms are more appropriate for these systems and are used in such systems. Many of these algorithms are based on earliest deadline first (EDF) policies. There exists a wealth of literature on EDF-based scheduling with many extensions to deal with sophisticated issues such as precedence constraints, resource requirements, system overload, multi-processors, and distributed systems. Deadline Scheduling for Real-Time Systems: EDF and Related Algorithms aims at collecting a significant body of knowledge on EDF scheduling for real-time systems, but it does not try to be all-inclusive (the literature is too extensive). The book primarily presents the algorithms and associated analysis, but guidelines, rules, and implementation considerations are also discussed, especially for the more complicated situations where mathematical analysis is difficult. In general, it is very difficult to codify and taxonomize scheduling knowledge because there are many performance metrics, task characteristics, and system configurations. Also, adding to the complexity is the fact that a variety of algorithms have been designed for different combinations of these considerations. In spite of the recent advances there are still gaps in the solution space and there is a need to integrate the available solutions. For example, a list of issues to consider includes: preemptive versus non-preemptive tasks, uni-processors versus multi-processors, using EDF at dispatch time versus EDF-based planning, precedence constraints among tasks, resource constraints, periodic versus aperiodic versus sporadic tasks, scheduling during overload, fault tolerance requirements, and providing guarantees and levels of guarantees (meeting quality of service requirements). Deadline Scheduling for Real-Time Systems: EDF and Related Algorithms should be of interest to researchers, real-time system designers, and instructors and students, either as a focussed course on deadline-based scheduling for real-time systems, or, more likely, as part of a more general course on real-time computing. The book serves as an invaluable reference in this fast-moving field.
Download or read book Design Methods for Reactive Systems written by R. J. Wieringa and published by Morgan Kaufmann. This book was released on 2003 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a framework for software design that shows where the techniques and approaches of design methods for software systems fit in. It discusses three methods in detail and demonstrates how to pick techniques from each of them. It also shows how to follow problem-solving steps that focus on the design problem rather than on the method.