Download or read book Introduction to Fluoropolymers written by Sina Ebnesajjad and published by William Andrew. This book was released on 2013-05-11 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Fluoropolymers demystifies fluoropolymers for a wide audience of designers, engineers, sales staff and managers. This important group of high-performance polymers has applications across a wide range of market sectors, including automotive, aerospace, medical devices, high performance apparel, oil & gas, renewable energy / solar photovoltaics, electronics / semiconductor, pharmaceuticals, and chemical processing. Dr. Ebnesajjad covers the history and applications of a wide variety of materials, including expanded polytetrafluoroethylene, polyvinyl fluoride, vinylidene fluoride polymers and fluoroelastomers, just to name a few. Properties and applications are illustrated by real-world examples as diverse as waterproof clothing, vascular grafts and coatings for aircraft interiors. The different applications of fluoropolymers show the benefits of a group of materials that are highly water-repellant and flame-retardant, with unrivalled lubrication properties and a high level of biocompatibility. Health and safety and environmental aspects are also covered throughout the book. - Demystifies fluoropolymers for a broad audience of engineers in areas such as product design and manufacturing, as well as for non-engineers such as technical sales and management professionals - Explains the potential of fluoropolymers for a wide range of applications across sectors such as aerospace, energy and medical devices - Ideal for both recently qualified engineers and engineers with limited experience of fluoropolymers

Download or read book Technology of Fluoropolymers written by Jiri George Drobny and published by CRC Press. This book was released on 2008-09-19 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fully revised and updated, this second edition continues to provide industrial chemists, technologists, and engineers with the most accurate, compact, and practical source on fluoropolymers (such as Teflon). Highlighting new industrial, military, medical, and consumer goods applications, this edition adds more detailed information on equipment and

Download or read book Adhesion to Fluoropolymers written by Derek Brewis and published by iSmithers Rapra Publishing. This book was released on 2006 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Fluoropolymers written by Sina Ebnesajjad and published by William Andrew. This book was released on 2020-12-08 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Fluoropolymers, Second Edition, provides a comprehensive overview of the history, principles, properties, processing and applications of fluoropolymers, supporting their development and utilization in high-performance applications, components, and products. This second edition has been updated and expanded to include new in-depth chapters on manufacturing and applications of PTFE and melt processible fluoropolymers. The book begins by demonstrating the role of fluoropolymers in everyday life, before introducing the history and basic principles of fluoropolymers. This is followed by detailed coverage of the main fluoropolymer types. Properties and applications are illustrated by real-world examples as diverse as waterproof clothing, vascular grafts and coatings for aircraft interiors. The different applications of fluoropolymers show the benefits of a group of materials that are highly water-repellant and flame-retardant, with unrivalled lubrication properties and a high level of biocompatibility. Health and safety and environmental aspects are also covered throughout the book, with a final chapter examining safety, disposal, and recycling in detail. This book is an essential resource for anyone looking to understand or use fluoropolymer materials in their products. This includes engineers, product designers, manufacturers, scientists, researchers, and other professionals, across industries such as automotive, aerospace, medical devices, food and beverages, high performance apparel, oil and gas, renewable energy, solar photovoltaics, electronics and semiconductors, pharmaceuticals, and chemical processing. This is also a valuable introductory guide for academic researchers and advanced students in plastics engineering, polymer science, and materials science. - Introduces and demystifies fluoropolymers for a wide audience of engineers, designers, professionals, and researchers, across industries and disciplines - Covers a broad range of materials, including polytetrafluoroethylene (PTFE), polyvinyl fluoride (PVF), vinylidene fluoride polymers, fluoroelastomers, and more - Focuses on properties, processing methods and advanced industrial applications of fluoropolymers

Download or read book Fluoropolymer Applications in the Chemical Processing Industries written by Sina Ebnesajjad and published by William Andrew. This book was released on 2017-10-30 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluoropolymer Applications in Chemical Processing Industries: The Definitive User's Guide and Handbook, Second Edition, contains the most extensive collection of data and information on fluoropolymer applications in chemical processing industries. Because of their superior properties, fluoropolymers have been rapidly replacing metal alloys for corrosion inhibition in chemical processing equipment. This book is a complete compendium of information about fluoropolymer lining materials and structural piping and tubing. Fluoropolymer surfaces preserve purity of processing streams in the chemical processing, plastics, food, pharmaceutical, semiconductor, and pulp and paper industries. Updated to reflect major changes since 2004, this book contains practical, problem-solving tools for professionals in those industries. Equipment manufacturers, plant operators, and product design and manufacturing engineers all will benefit from the in-depth knowledge provided. This new edition includes new fluoropolymer grades and new examples of the fluoropolymer role in preventing corrosion. New fabrication techniques have been added, and additional emphasis has been placed on adhesion and welding techniques. New sections have been added on inspection of new linings, and in-service inspection – including inspection frequency, acceptance criteria, fitness for service evaluation, and reparability. - Includes extensive guidelines for the selection of fluoropolymers for corrosion control - Features a detailed 'how-to' on processes that convert fluoropolymers into shapes and parts - Discusses fabrication techniques to finish the fluoropolymer components before exposure to harsh chemical environments - Includes laboratory techniques to determine the cause of part failure, and a modeling methodology to predict and analyze failure of fluoropolymer parts

Download or read book Technology of Fluoropolymers written by Jiri G. Drobny and published by CRC Press. This book was released on 2023-04-21 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition has been updated and expanded, providing industrial chemists, technologists, environmental scientists, and engineers with an accurate, compact, and practical source of information on fluoropolymers. Highlighting existing and new industrial, military, medical, and consumer goods applications, this edition adds more detailed information on equipment and processing conditions. It explores breakthroughs in understanding property-structure relationships, new polymerization techniques, and the chemistry underlying polymers, such as melt-processable fluoroplastics. It also expands on the important properties of fluoropolymers, including heat and radiation degradation, health effects, and recycling. Features: Revised, updated, and expanded to continue to provide an accurate, compact, and practical source of information on fluoropolymers Explores the property-structure relationships, polymerization techniques, and the chemistry underlying polymers Fluoropolymers rank high on the specialty polymers group and, due to their unique properties, are naturally part of the solution to the industrial sustainability challenges of the twenty-first century Describes the technology of fluoropolymers, including thermoplastic and elastomeric products Expands upon the important characteristics of fluoropolymers and their recycling.

Download or read book Fluoroplastics Volume 2 written by Sina Ebnesajjad and published by William Andrew. This book was released on 2015-07-30 with total page 767 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluoroplastics, Volume 2: Melt Processible Fluoropolymers - The Definitive User's Guide and Data Book compiles the working knowledge of the polymer chemistry and physics of melt processible fluoropolymers with detailed descriptions of commercial processing methods, material properties, fabrication and handling information, technologies, and applications, also including history, market statistics, and safety and recycling aspects. Both volumes of Fluoroplastics contain a large amount of specific property data useful for users to readily compare different materials and align material structure with end use applications. Volume Two concentrates on melt-processible fluoropolymers used across a broad range of industries, including automotive, aerospace, electronic, food, beverage, oil/gas, and medical devices. This new edition is a thoroughly updated and significantly expanded revision covering new technologies and applications, and addressing the changes that have taken place in the fluoropolymer markets. - Exceptionally broad and comprehensive coverage of melt processible fluoropolymers processing and applications - Provides a practical approach, written by long-standing authorities in the fluoropolymers industry - Thoroughly updated and significantly expanded revision covering new technologies and applications, and addressing the changes that have taken place in the fluoropolymer markets

Download or read book Fascinating Fluoropolymers and Their Applications written by Bruno Ameduri and published by Elsevier. This book was released on 2020-06-18 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluoropolymers are unique materials. Since the middle of the twentieth century fluropolymers have been used in applications where a wide temperature range, a high resistance to aggressive media, excellent tribological characteristics, and specific low adhesion are required. Today, researchers turn to fluoropolymers to solve new challenges and to develop materials with previously unattainable properties. Fascinating Fluoropolymers and Their Applications covers recent developments of fluoropolymer applications in energy, optical fibers, blood substitutes, textile coatings, membranes and other areas, written by experts in these fields. This volume in the Progress in Fluorine Science series is ideal for researchers and engineers who want to learn about the technology and applications of these special polymers, as well as industrial manufacturers who are interested in achieving new product characteristics in their respective industries.

Download or read book Handbook of Fluoropolymer Science and Technology written by Dennis W. Smith and published by John Wiley & Sons. This book was released on 2014-05-05 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Fluoropolymer Science and Technology A comprehensive handbook on fluoropolymer synthesis, characterization, and processing Fluoropolymers, one of the more durable classes of polymer materials, are known to enable novel technologies as a result of their remarkable properties. As key components in industry applications, fluoropolymers have established commercial interest and scientists have discovered more efficient approaches of handling them. This book reviews up-to-date fluoropolymer platforms as well as recently discovered methods for the preparation of fluorinated materials. It focuses on synthesis, characterization, and processing aspects, providing guidelines for practicing scientists and engineers. In addition, the book covers: Concepts and studies from leading international laboratories, including academia, government, and industrial institutions Emerging technologies and applications in energy, optics, space exploration, fuel cells, microelectronics, gas separation membranes, biomedical instrumentation, and more Current environmental concerns associated with fluoropolymers, relevant regulations, and growth opportunities Overall, the chapters provide coverage of chemical methods and help the reader further understand how fluoropolymer research provides solutions for material challenges. The concepts in this book also inspire professionals to identify new markets and funding sources for fluoropolymer research and development.

Download or read book Fluoropolymer Additives written by Sina Ebnesajjad and published by William Andrew. This book was released on 2011-12-16 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, the applications of fluoropolymer additives have expanded significantly, with even the meaning of 'fluoropolymer additives' expanding from relatively the narrow definition of PTFE powder fillers to a wide variety of fluoropolymer elastomers, used as a processing aid for plastics processing such as extrusion, injection molding, and film blowing. The benefits of fluoropolymer additives used in plastics are the elimination of sharkskin defects, increases in process speed and output (up to 20%), the reduction of die build up, the reduction of gels and optical defects, etc. In addition, fluropolymer additives are being increasingly used in inks, lubricants, and coatings. For example, in the coating industry fluoropolymer additives can increase the life cycle of exterior coatings due to their excellent weatherability and subsequently increase the time between recoats. Engineers and scientist involved in polymer processing need practical information about these additives, their applications, and proper and safe handling. Until now much of this information has been difficult to obtain because of commercial secrecy. Existing books on polymer additives only include the briefest of coverage of fluoropolymer additives. In this first book on an additive group of growing importance, the authors review the commercial additives available on the market. The applications chapters provide readers with a step by step description of techniques to select and incorporate these additives in various products. UNIQUE FEATURES AND BENEFITS: Fluoropolymer additives are becoming more widely used with key applications including use as a polymer processing aid (increasing speed and reducing faults) and as an additive to lubricants, inks and coatings. This book is the only practical guide available to the selection and use of fluoropolymer additives, and will help readers to optimize existing fluoropolymer applications and implement new ones. Fluoropolymers are known as an area where detailed information is hard to come by. In this book two former DuPont employees provide a wide range of industry sectors with the essential practical information and data they need to realize the full benefits of fluoropolymer additives. Written for practicing engineers, Ebnesajjad and Morgan take a highly practical approach to the subject, based on real-world experience and case studies.

Download or read book Well Architectured Fluoropolymers Synthesis Properties and Applications written by Bruno Ameduri and published by Elsevier. This book was released on 2004-07-07 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the increasing need for ever better performing materials endowed with specific properties, macromolecular engineering has become a useful tool for designing well-architectured polymers (telomers, telechelics, stars, dendrimers, alternating, block- and graftcopolymers). These polymers are nowadays seeing an enormous growth. Among them, fluoropolymers are seen as high value added materials in many applications ranging from surfactants, optical fibers, biomaterials, coatings, to membranes for fuel cells. Indeed, the relationship between structure of the monomer to the properties of the polymers is of increasing interest so that these properties are tuned for the most appropriate applications. As most fluoropolymers are prepared from radical synthesis, this book devotes various parts on the use of the controlled radical (or pseudo-living) polymerisation of fluoromonomers leading to discoveries of thermoplastic elastomers or original surfactants for polymerisation in supercritical CO2. Well-Architectured Fluoropolymers: Synthesis, Properties and Applications is composed of five chapters starting with a general introduction outlining basic concepts. Emphasis is placed on recent developments, and each chapter describes comprehensive techniques of synthesis of well-defined fluorotelomers or polymers, their properties, characterisations, and their applications, for immediate use by today's engineers, industrial and academic scientists, and researchers. The book has been arranged to enable self-managed reading and learning. It is both a source of data and a reference. - On the synthesis, properties and applications of fluoropolymers: remarkable, high value added materials applied in surfactants, optical fibres, biomaterials, coatings and membranes for fuel cells - For immediate use by today's engineers, industrial and academic scientists, and researchers - Written to enable self-managed reading and learning, being both a source of data and a reference

Download or read book Opportunities for Fluoropolymers written by Bruno Ameduri and published by Elsevier. This book was released on 2020-06-18 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluoropolymers are very unique materials. Since the middle of the twentieth century fluoropolymers have been used in applications where a wide temperature range, a high resistance to aggressive media, excellent tribological characteristics, and specific low adhesion are required. Today, researchers turn to fluoropolymers to solve new challenges and to develop materials with previously unattainable properties. Opportunities for Fluoropolymers: Synthesis, Characterization, Processing, Simulation and Recycling covers recent developments in fluoropolymers, including synthesis of new copolymers, strategies for radical polymerization of fluoromonomers (conventional or controlled; RDRP), and the modification of fluoropolymers to achieve desired material characteristics. This volume in the Progress in Fluorine Science series is ideal for researchers and engineers who want to learn about the synthetic strategies, properties, and recycling of these special polymers, as well as industrial manufacturers who are interested in achieving new product characteristics in their respective industries.

Download or read book Fluorinated Coatings and Finishes Handbook written by Laurence W. McKeen and published by William Andrew. This book was released on 2015-10-11 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluorinated Coatings and Finishes Handbook: The Definitive User's Guide, Second Edition, addresses important, frequently posed questions by end-user design engineers, coaters, and coatings suppliers on fluorinated coatings and finishes, thus enabling them to achieve superior product qualities and shorter product and process development times. The book provides broad coverage of these fluorinated polymer coatings, including the best known PTFE, polytetrafluoroethylene, first trademarked as Teflon® and ePTFE (GoreTex®). Their inherent qualities of low surface tension, non-stick, low friction, high melting point, and chemical inertness make fluoropolymer coatings widely desirable across thousands of industrial and consumer applications, but these properties also make it difficult to convert fluoropolymers to coatings that have sufficient adhesion to the substrate to be protected. In this book, readers learn how fluoropolymer coatings are used and made, about their pigments and fillers, binders, dispersion processes, additives, and solvents. The book includes substrate preparation, coating properties, baking and curing processes, performance tests, applications, and health and safety. - Provides a practical handbook that covers the theory and practice of fluorinated coatings, including the structure and properties of binders and how to get a non-stick coating to stick to the substrate - Covers liquid and power fluorocoatings, their applications methods, curing and baking processes, and their commercial end uses - Presents detailed discussions of testing methods related to fluorocoatings, common coating defects, how they form, how to eliminate them, and the health and safety aspects of using and applying fluorocoatings - Includes substrate preparation, coating properties, baking and curing processes, performance tests, applications, and health and safety

Download or read book Fluoroplastics Volume 1 written by Sina Ebnesajjad and published by Elsevier. This book was released on 2014-10-31 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluoroplastics, Volume 1, compiles in one place a working knowledge of the polymer chemistry and physics of non-melt processible fluoropolymers with detailed descriptions of commercial processing methods, material properties, fabrication and handling information, technologies, and applications. Also, history, market statistics, and safety and recycling aspects are covered. Both volumes contain a large amount of specific property data which is useful for users to readily compare different materials and align material structure with end use applications.Volume 1 concentrates mostly on polytetrafluoroethylene and polychlorotrifluoroethylene and their processing techniques – which are essentially non-melt-processes – used across a broad range of industries including automotive, aerospace, electronic, food, beverage, oil/gas, and medical devices.Since the first edition was published many new technical developments and market changes have taken place and new grades of materials have entered the market. This new edition is a thoroughly updated and significantly expanded revision covering new technologies and applications, and addressing the changes that have taken place in the fluoropolymer markets.Fluoroplastics, Volume 1 is an all-encompassing handbook for non-melt processible fluoropolymers – a unique and invaluable reference for professionals in the fluoropolymer industry and fluoropolymer application industries. - Exceptionally broad and comprehensive coverage of non-melt processible fluoropolymers processing and applications. - Practical approach, written by long-standing authority in the fluoropolymers industry. - New technologies, materials and applications are included in the new edition.

Download or read book Handbook of Thermoplastic Fluoropolymers written by Laurence W. McKeen and published by William Andrew. This book was released on 2023-04-15 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Thermoplastic Fluoropolymers: Properties, Characteristics and Data gathers key technical information about structure, characteristics, properties and processing methods of commercial thermoplastic fluoropolymers in one easy reference. Thermoplastic fluoropolymers have many desirable functional characteristics, such as high thermal stability, reliability at high mechanical loads, a wide range of operating temperatures, and high chemical and radiation stability. These characteristics make them crucial in many specialist applications, including in the military, biopharmaceuticals and environmental protection. This uniquely comprehensive guide to this versatile family of polymers will help processors, fabricators and end-users find new and innovative solutions.Detailed coverage of technical details of processing methods, characteristics, and chemical properties of commercial thermoplastic fluoropolymers all in one place make this the most authoritative reference to the subject available. - Includes extensive physical and mechanical property data for commercial thermoplastic fluoropolymers - Provides comprehensive chemical resistance data for commercial thermoplastic fluoropolymers - Explains the basics of fluoropolymers for readers with different backgrounds

Download or read book Modern Fluoropolymers written by John Scheirs and published by John Wiley & Sons. This book was released on 1997-09-09 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last 25 years have seen the introduction of numerous new fluoropolymers and fluoroelastomers and these developments have widened considerably the scope and applications of fluorine-containing polymers. Modern Fluoropolymers provides an overview of a comprehensive range of commercial fluoropolymers with an emphasis on structure/property behaviour and their diverse fields of application Topics covered include: crystalline and amorphous fluoropolymers, fluoroelastomers, coatings, sealants, linings, electrical properties, surface properties, effects of radiation, chemical resistance and failure modes of fluoropolymers. With chapters written by experts from industry and academia from North America, Europe, Japan, Australia and Russia, the book is truly international in scope and will be welcomed by researchers, processors and users of all types of fluoropolymers.

Download or read book Fluorinated Ionomers written by Walther Grot and published by William Andrew. This book was released on 2011-07-15 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluorinated ionomer polymers form impermeable membranes that conduct electricity, properties that have been put to use in large-scale electrochemical applications, revolutionizing the chlor-alkali industry and transforming production methods of some of the world’s highest-production commodity chemicals: chlorine, sodium hydroxide and potassium hydroxide. The use of fluorinated ionomers such as Nafion® have removed the need for mercury and asbestos in these processes and led to a massive reduction in electricity usage in these highly energy-intensive processes. Polymers in this group have also found uses in fuel-cells, metal-ion recovery, water electrolysis, plating, surface treatment of metals, batteries, sensors, drug release technologies, gas drying and humidification, and super-acid catalysis used in the production of specialty chemicals. Walther Grot, who invented Nafion® while working for DuPont, has written this book as a practical guide to engineers and scientists working in electrochemistry, the fuel cell industry and other areas of application. His book is a unique guide to this important polymer group and its applications, in membranes and other forms. The 2e expands this handbook by over a third, with new sections covering developments in electrolysis and membranes, additional information about the synthesis and science of the polymer group, and an enhanced provision of reference data. An essential reference for scientists working with electrolysis and electrochemical processes (the use of this polymer group in industrial chemistry processes is credited with a 1% reduction in global electricity usage) Covers the techniques involved in the growing range of applications for fluorinated ionomers, including fuel cells, batteries and drug delivery The only book on this important polymer group, written by Walther Grot, the inventor of the leading fluorinated ionomer, Nafion® from DuPont