Download or read book Fittings 24 Cone Flareless Fluid Connection 3000 Psi written by G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Aerospace Standard (AS) establishes the requirements for 24° cone flareless fluid connection fittings and nuts, internally or externally swaged, preset, or welded sleeves for use in aircraft fluid systems at nominal operating pressures up to and including 3000 psi. Revision G clarifies: defect descriptions for aluminum material finishes and test requirements for high purity aluminum (HPA) coating to eliminate redundancy with reference documents; qualification approval between 4130 and 15-5PH materials; equivalent materials for PRI QPL lists; pressure rating for size 16 aluminum tubing; provided reference for defect limits on unmachined surfaces. Lists of flareless fitting end standards is made consistent throughout. Adds single point machining requirement on flareless ends. Adds 12 month periodic test interval. Provides lubrication allowance for pneumatic test of similar materials.
Download or read book Fittings 24 Cone Flareless Fluid Connection 3000 Psi Supplement 1 written by G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This supplement forms a part of the Aerospace Standard AS18280 Fittings, 24° Cone, Flareless, Fluid Connection, 3000 psi, and shall be used to identify fitting standards citing this procurement specification. AS18280SUP1A has been reaffirmed to comply with the SAE five-year review policy.
Download or read book Fittings 24 Degree Cone Flareless Fluid Connection 3000 Psi written by G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Aerospace Standard (AS) establishes the requirements for 24 degree cone flareless fluid connection fittings and nuts, internally or externally swaged, preset, or welded sleeves for use in aircraft fluid systems at nominal operating pressures up to and including 3000 psi. Note 3.3.2, sub-note 4 added to address acceptance of excessive roughness of thread crests due to thread rolling process. NAS1760 added to note 3.7.5. Specification number typo corrected in Table 12.
Download or read book Fittings 24 Cone Flareless Fluid Connection 5000 Psi written by G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Aerospace Standard (AS) establishes the requirements for 24° cone flareless fluid connection fittings and nuts and bite type flareless sleeves (see Section 6) for use in aircraft fluid systems at an operating pressure of 5000 psi for the fittings and nuts and 3000 psi for the bite type sleeves. AS4444 has been reaffirmed to comply with the SAE five-year review policy.
Download or read book Sleeve Bite Type 24 Cone Flareless Fitting 3000 Psi written by G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies and published by . This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Aerospace Standard (AS) establishes the requirements for bite type sleeves for use with 24° cone flareless fluid connection fittings per AS18280.
Download or read book Sleeve Internally Or Externally Swaged Or Welded 24 Cone Flareless Fitting 3000 Psi written by G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies and published by . This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Aerospace Standard (AS) establishes the requirements for internally or externally swaged or welded sleeves or tube end adapters for use with 24° cone flareless fluid connection fittings per AS18280.
Download or read book Sleeves Internally Or Externally Swaged Or Welded 24 Cone Flareless Fitting 3000 Psi written by G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Aerospace Standard (AS) establishes the requirements for internally or externally swaged or welded sleeves or tube end adapters for use with 24° cone flareless fluid connection fittings per AS18280. AS18280/2A has been reaffirmed to comply with the SAE five-year review policy.
Download or read book Fitting 24 Cone Flareless to 37 Flared Fluid Connection written by G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Aerospace Standard (AS) establishes the requirements for fluid fittings that combine both 24° cone flareless and 37° flared connections for use in all types of fluid systems. AS4444/2 has been reaffirmed to comply with the SAE five-year review policy.
Download or read book Fittings Straight Thread Port Or Flanged to 24 Cone Flareless Fluid Connection written by G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Aerospace Standard (AS) establishes the requirements for fluid fittings that combine both straight thread port or flanged connections and 24° cone flareless connections for use in all types of fluid systems. AS4875/3 has been reaffirmed to comply with the SAE five-year review policy.
Download or read book Fittings Weld to 24 Cone Flareless Fluid Connection Metric written by G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Metric Aerospace Standard (MA) establishes the requirements for fluid fittings that combine both weld fitting end and 24° cone flareless fitting end connections for use in all types of metric fluid systems. MA4510/1 has been reaffirmed to comply with the SAE five-year review policy.
Download or read book Fittings Weld to 24 Cone Flareless Fluid Connection written by G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Aerospace Standard (AS) establishes the requirements for fluid fittings that combine both weld fitting end and 24° cone flareless fitting end connections for use in all types of fluid systems. AS4510/1 has been reaffirmed to comply with the SAE five-year review policy.
Download or read book Department Of Defense Index of Specifications and Standards Alphabetical Listing Part I July 2005 written by and published by DIANE Publishing. This book was released on with total page 779 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book FITTING END 24 CONE FLARELESS FLUID CONNECTION DESIGN STANDARD written by G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: AS5863 HAS BEEN REAFFIRMED TO COMPLY WITH THE SAE FIVE-YEAR REVIEW POLICY.
Download or read book Fitting Plug in Union Ring Locked 24 Degree Cone Fluid Connection 5080 Psi 35000 KPa Specification for written by G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Aerospace Standard (AS) establishes the requirements for 24 degree cone AS5827 or EN 6123 flareless ring locked fitting assemblies per AS5550 and AS5865, for use in aircraft fluid systems at nominal operating pressure of 5080 psi (35000 kPa) maximum and operating temperature range of -65 to +275 °F (-54 to +135 °C).The general requirements shall be for, but not limited to, commercial aircraft hydraulic components per AS4941, using port configuration as specified in AS5551. Updated 4.5.3 Periodic Control Tests to a 12-month interval.
Download or read book Fitting Plug in Union Ring Locked 24 Degree Cone Fluid Connection 5080 Psi 35 000 KPa Specification for written by G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies and published by . This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Aerospace Standard (AS) establishes the requirements for 24 degree cone AS5827 or EN 6123 flareless Ring locked fitting assemblies per AS5550 and AS5865, for use in aircraft fluid systems at nominal operating pressure of 5080 psi (35 000 kPa) maximum and operating temperature range of -65 to +275 °F (-54 to +135 °C).The general requirements shall be for, but not limited to, commercial aircraft hydraulic components per AS4941, using port configuration as specified in AS5551. Include SI Metric equivalents for ISO recognition of this document.
Download or read book Fitting Plug in Union Ring Locked 24 Cone Fluid Connection 5080 Psi Specification for written by G-3C, AS-EN Harmonization Task Group and published by . This book was released on 2006 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Aerospace Standard (AS) establishes the requirements for 24° cone AS5827 or EN 6123 flareless Ring locked fitting assemblies per AS5550 and AS5865, for use in aircraft fluid systems at nominal operating pressure of 5080 psi maximum and operating temperature range of -65 to +275 °F.The general requirements shall be for, but not limited to, commercial aircraft hydraulic components per AS4941, using port configuration as specified in AS5551. This specification covers requirements for qualification testing and procurement of flareless port fittings for 5000 psi hydraulic components.
Download or read book Department Of Defense Index of Specifications and Standards Numerical Listing Part II July 2005 written by and published by DIANE Publishing. This book was released on with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: