Download or read book Polyethylene Film Extrusion written by B. H Gregory and published by Trafford Publishing. This book was released on 2009-11 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: A revised version of this book is now available.The polyethylene industry has been in the midst of major restructuring and rationalization. This has lead to joint ventures and alliances to combine technologies and exploit opportunities to maximize improvements in process productivity, catalyst innovations, and enhancements in extrusion technology and converting. This comprehensive study of the polyethylene film extrusion process describes this technology in detail. In depth descriptions of the manufacturing processes for polyethylene homopolymers and copolymers, including metallocenes, are reviewed. All aspects of machine design with particular emphasis on screws and dies including coextrusion are discussed comprehensively. With computer modeling, the interactions between equipment and polymer are quantified. All aspects of equipment design and polymer features that control melt fracture, interfacial instabilities, gauge control, output and temperature, and cooling of blown and cast film processes are presented quantitatively. This methodology will highlight solutions in troubleshooting for optimum design and operation and the best available polymer and formulation choices. All polyethylene film applications in packaging, agriculture, lamination, and construction, consumer, industrial, and health care are reviewed and discussed in depth.
Download or read book Film Extrusion Manual written by Technical Association of the Pulp and Paper Industry Staff and published by . This book was released on with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Film Extrusion Manual Third Edition written by James F. Macnamara, Jr. and published by . This book was released on 2020-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Film Extrusion Manual written by Thomas I. Butler and published by Tappi Press. This book was released on 1992-01-01 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Complete Polyethylene Film Extrusion Manual written by Bertram Hubert Gregory and published by . This book was released on 2014-11-24 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical and detailed evaluation of polyethylene film extrusion processes for a diverse range of products. Polyethylene film is pervasive in many aspects of everyday life in applications including consumer and bulk packaging, household items, construction, horticulture, medical and hygiene products and many more. Established now for many years the technology of polyethylene film extrusion continues to develop as newer applications often demand superior performance and more established uses strive for reduced materials consumption by downgauging. Film performance is influenced by the nature of the polymer, the manufacturing process and a wide variety of additives, as well as the option of creating ever more complex multi-layered structures by coextrusion, laminating, coating and even intentional blocking. Applications may demand stretch or shrink behaviour, mechanical strength, heat sealability and high or low permeability. This book has been written for a wide readership of technologists, engineers, marketers and students engaged in the development and production of polyolefin films for all applications. The aim is to assist in optimizing product performance, evaluating the most cost effective solutions and providing useful information on the key polymers and films commercially available. Key features of screw and die designs and film treatments, blending and formulations are evaluated. Clear diagrams are provided together with copious data.
Download or read book Film Extrusion Manual written by Thomas I. Butler and published by Tappi. This book was released on 2005-01-01 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2013-09-21 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. A practical guide to the selection, design and optimization of extrusion processes and equipment Designed to improve production efficiency and product quality Focuses on practical fault analysis and troubleshooting techniques
Download or read book Extrusion Coating written by B. H. Gregory and published by Trafford Publishing. This book was released on 2008-05-28 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive study of extrusion coating technology describes the process and applications in detail, combining experimental data with computer modeling and the author's 30 years of experience. This methodology provides insight, clarity and assistance in problem solving, process optimization and new product development. The oportunities to exploit a wide range of polymers by the extrusion coater are discussed in detail. These include LDPE, HDPE, PP, ionomers, copolymers and blends and speciality materials, such as EVOH and PET. Everything you wanted to know about: Screw and die design for mono and coextrusion. Chill roll design and winders. Maximizing adhesion at high line speeds:- time in air gap and melt relaxation. Adhesion promotion:- corona, flame, ozone treatment and chemical primers. Feedblock and dual manifold coextrusion compared. Coextrusion:- control layer arrangement and eliminate interfacial instabilities. Optimize melt stability and minimize neck-in in air gap. Material selection:- polyethylenes, copolymers, ionomers, metallocenes, polypropylene etc. Substrates: pulp and paper, aluminium foil, plastic films etc. Applications for extrusion coatings and laminates. Minimize odor and off-taste and the scalping phenomenon in food packaging. Trouble shooting and many more insights. Target Audience: Engineers, marketers, technicians and students involved with the extrusion coating process. Table of Contents: The Extrusion Coating Process Equipment and Screw Design Die Design Stretching Flows and Neck-In Adhesion Coextrusion Adhesion Promotion Methods Polymers for Extrusion Coating: includes, coplymers, ionomers, PP, blends, metallocene PEs Speciality Polymers: EVOH and PET Improving organoleptic properties Substrates and Films for the EXtrusion Coater Extrusion Coated Products and Applications
Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2004-12-31 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why is it important to get to equilibrium and how long does it take? Are there problems running polypropylene profiles on a single screw extruder? Does the job involve compounding color concentrates on a corotating twin screw extruder? This unique reference work is designed to aid operators, engineers, and managers in quickly answering such practical day-to-day questions in extrusion processing. This comprehensive volume is divided into 7 Parts. It contains detailed reference data on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. This reference is a practical guide to extrusion bringing together both the equipment and materials processing aspects. It provides basic and advanced topics about the thermoplastics processing in the extruder, for reference and training. Parts 1 û 3, emphasize the fundamentals, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. Parts 4 û 7 treat advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. Extensive applications in Part 7 cover such contemporary areas as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. Each chapter includes review topics.
Download or read book Blown Film Extrusion written by Kirk Cantor and published by . This book was released on 2018 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: "From hardware and materials through processing and properties, a broad coverage of blown film extrusion is presented. A primary objective of this book is to ensure a useful balance of theory and practice. The reader will find the answers to why they encounter certain effects in the blown film process so that they are better able to troubleshoot and improve their operations. At the same time, current practices and equipment are emphasized to keep readers up-to-date with the most productive and efficient technology. The companion computer-based learning tool, The Blown Film Extrusion Simulator, is provided to enhance the reader's understanding. This software was developed specifically to teach blown film extrusion equipment operation and processing principles, and is available for download. Throughout this book, exercises using the simulator are described to complement the methods and principles explained. New in this third edition is a chapter on polymer rheology, with an overview of the rheology of polymer melts and its effect on extruding blown film. Additionally, improvements and corrections have been made throughout the book. Contents: Materials for Blown Film Polymer Rheology Extrusion Overview Hardware for Blown Film Processing Coextrusion Film Properties Troubleshooting"--
Download or read book Plastics Extrusion Technology Handbook written by Sidney Levy and published by Industrial Press Inc.. This book was released on 1989 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering complete and in-depth data and information on plastics extrusion, this practical handbook presents the technology of the subject rather than the theory. Presents an overview of extrusion technology as applied to the operation of extrusion systems and the design of tooling and equipment for use in the process. Provides basic technical information on the behavior of polymer and plastics materials in the extrusion process. Contains tool descriptions that provide a basis for the analysis of existing product lines as examples for the design of new systems. Includes illustrations of and background material on control systems for the extruder and extrusion process.
Download or read book Extrusion Coating Lamination and Coextrusion written by Bertram Hubert Gregory and published by . This book was released on 2012 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical study of the production and potential of multilayered plastic films This book is written for the industry professional engaged in the development, production or specification of multilayered films for packaging and other industrial applications. It will enable the reader to optimize product performance and evaluate the most cost effective solutions, with useful information on the key polymers and substrates used. Multilayer film structures provide properties and performance which could not be achieved by a single material, whilst also exploiting cheap and easily processed polymers. All three processes described can be used in their manufacture, and in combination they provide yet more options and benefits. One role of this book is to explain when each should be used. This is a practical process manual filled with useful advice for the processor seeking the optimum product, describing the effects of machine design, process variables and materials selection. There is sufficient theory for the student or industry newcomer who wishes to understand how the processes work. Designers and end-users will also find plenty of information on the properties and performance that can be obtained.
Download or read book Extruding Plastics written by D.V. Rosato and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 791 pages. Available in PDF, EPUB and Kindle. Book excerpt: Worldwide, extrusion lines successfully process more plastics into prod ucts than other processes by consuming at least 36 wt% of all plastics. They continue to find practical solutions for new products and/ or prob lems to meet new product performances. This book, with its practical industry reviews, is a unique handbook (the first of its kind) that covers over a thousand of the potential combina tions of basic variables or problems with solutions that can occur from up-stream to down-stream equipment. Guidelines are provided for maxi mizing processing efficiency and operating at the lowest possible cost. It has been prepared with an awareness that its usefulness will depend greatly upon its simplicity and provision of essential information. It should be useful to: 0) those already extruding and desiring to obtain additional information for their line and/ or prOVide a means of reviewing other lines that can provide their line with operating improvements; (2) those processing or extruding plastics for the first time; (3) those consider ing going into another extrusion process; (4) those desiring additional information about employing the design of various products more effi ciently, with respect to both performance and cost; (5) those contemplat ing entering the business of extrusion; (6) those in new venture groups, materials development, and/ or market development; (7) those in disci plines such as nonplastics manufacturers, engineers, designers, quality control, financial, and management; and (8) those requiring a textbook on extrusion in trade schools and high schools or colleges.
Download or read book Design of Extrusion Forming Tools written by Olga Carneiro and published by Smithers Rapra. This book was released on 2012-12-19 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of extrusion forming tools (dies and calibrators) is a difficult task usually performed by the employment of experimental trial-and-error procedures, which can hinder the performance and cost of the tools, may increase the time to market of new extruded products and limit their complexity.This book provides detailed information on the design of extrusion forming tools. It describes the main problems to be faced when designing dies and calibrators, the most relevant polymer properties to be considered in the design process, the specific problems related to several types of conventional extrusion dies, and recent developments on the design of special dies and process modeling. It is an updated and unique book on the subject, where each chapter is prepared by internationally recognized experts. Having in mind its nature, it is expected to become a useful reference book for higher education students (both undergraduate and graduate ones), teachers, researchers and engineers active in the extrusion industry.
Download or read book Handbook of Industrial Polyethylene and Technology written by Mark A. Spalding and published by John Wiley & Sons. This book was released on 2017-10-26 with total page 1410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides an exhaustive description of polyethylene. The 50+ chapters are written by some of the most experienced and prominent authors in the field, providing a truly unique view of polyethylene. The book starts with a historical discussion on how low density polyethylene was discovered and how it provided unique opportunities in the early days. New catalysts are presented and show how they created an expansion in available products including linear low density polyethylene, high density polyethylene, copolymers, and polyethylene produced from metallocene catalysts. With these different catalysts systems a wide range of structures are possible with an equally wide range of physical properties. Numerous types of additives are presented that include additives for the protection of the resin from the environment and processing, fillers, processing aids, anti-fogging agents, pigments, and flame retardants. Common processing methods including extrusion, blown film, cast film, injection molding, and thermoforming are presented along with some of the more specialized processing techniques such as rotational molding, fiber processing, pipe extrusion, reactive extrusion, wire and cable, and foaming processes. The business of polyethylene including markets, world capacity, and future prospects are detailed. This handbook provides the most current and complete technology assessments and business practices for polyethylene resins.
Download or read book Extrusion Coating Manual written by Technical Association of the Pulp and Paper Industry. Water Removal Committee and published by Tappi. This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A reference on extrusion coating processes, equipment, and raw materials, for engineers, technicians, and operators. Offers information on classical materials and troubleshooting techniques as well as the latest materials and machine designs, with chapters on screw design, extrusion dies, bead reduction die technology, pretreatments, coat weight and thickness measurement, and winding. Other topics include safety, polyolefin and polyethylene for extrusion coating, properties of common polymers, color and additives, and processing and converting tips for cast film and extrusion coating. Includes bandw photos and diagrams. No index. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Blown Film Extrusion written by Kirk Cantor and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2019-01-14 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: From hardware and materials through processing and properties, a broad coverage of blown film extrusion is presented. A primary objective of this book is to ensure a useful balance of theory and practice. The reader will find the answers to why they encounter certain effects in the blown film process so that they are better able to troubleshoot and improve their operations. At the same time, current practices and equipment are emphasized to keep readers up-to-date with the most productive and efficient technology. The companion computer-based learning tool, The Blown Film Extrusion Simulator, is provided to enhance the reader’s understanding. This software was developed specifically to teach blown film extrusion equipment operation and processing principles, and is available for download. Throughout this book, exercises using the simulator are described to complement the methods and principles explained. New in this third edition is a chapter on polymer rheology, with an overview of the rheology of polymer melts and its effect on extruding blown film. Additionally, improvements and corrections have been made throughout the book. Contents: ? Materials for Blown Film ? Polymer Rheology ? Extrusion Overview ? Hardware for Blown Film ? Processing ? Coextrusion ? Film Properties ? Troubleshooting
