Download or read book Functional Fillers for Plastics written by Marino Xanthos and published by John Wiley & Sons. This book was released on 2010-01-07 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and up-to-date overview of the major mineral and organic fillers for plastics, their production, structure and properties, as well as their applications in terms of primary and secondary functions. Edited and co-authored by Professor Marino Xanthos with contributions by international experts from industry and academia, this book presents methods of mixing/incorporation technologies, surface treatments and modifications for enhanced functionality, an analysis of parameters affecting filler performance and a presentation of current and emerging applications. Additionally, the novel classification according to modification of specific polymer properties rather than filler chemical composition provides a better understanding of the relationships between processing, structure and properties of products containing functional fillers and the identification of new markets and applications. For engineers, scientists and technologists involved in the important sector of polymer composites.
Download or read book Fillers for Polymer Applications written by Roger Rothon and published by Springer. This book was released on 2017-03-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides an introduction to and reference information about the science behind the production and use of particulate fillers in polymer applications. Fillers play an important role and are used with practically all types of polymers: thermoplastics, thermosets, elastomers.Readers will find an introduction to the topic of particulate fillers for polymer applications and their importance. The first chapters describe the use and characteristics of fillers in different polymer types, such as thermoplastics, thermosets and elastomers. The following chapters compile and summarize comprehensive information about different filler materials which find application nowadays, including mineral fillers (for example feldspars, wollastonites, and many more) and inorganic fillers (barium sulphate, or clays), bio-fillers, recycled and sustainable fillers, and fillers for specific applications (for example flame-retardant fillers, fillers for electrically conductive applications, or thermally conductive additives).Offering key information, compiled by a mixed team of authors from academia and industry, this handbook will appeal to researchers and professionals working on and with particulate polymer fillers alike.
Download or read book Particulate Fillers for Polymers written by R. N. Rothon and published by iSmithers Rapra Publishing. This book was released on 2002 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an overview of particulate filler production and use. Each filler type has different properties and these in turn are influenced by the particle size, shape and surface chemistry. Filler characteristics are discussed from costs to particle morphology. Practical aspects of filler grading are described and the principal filler types are outlined. Filler surface modification is an important topic. The main types of modifying agent and their uses are described, from fatty acids to functionalised polymers. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database gives useful references for further reading.
Download or read book Handbook Of Fillers For Plastics written by H.S. Katz and published by Springer Science & Business Media. This book was released on 1987-11-30 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book should be of interest to manufacturers of plastics products and fillers, plastics designers, engineers and polymer chemists.
Download or read book Polypropylene written by J. Karger-Kocsis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt: My heart sank when I was approached by Dr Hastings and by Professor Briggs (Senior Editor of Materials Science and Technology and Series Editor of Polymer Science and Technology Series at Chapman & Hall, respectively) to edit a book with the provisional title Handbook of Poly propylene. My reluctance was due to the fact that my former book [1] along with that of Moore [2], issued in the meantime, seemed to cover the information demand on polypropylene and related systems. Encour aged, however, by some colleagues (the new generation of scientists and engineers needs a good reference book with easy information retrieval, and the development with metallocene catalysts deserves a new update!), I started on this venture. Having some experience with polypropylene systems and being aware of the current literature, it was easy to settle the titles for the book chapters and also to select and approach the most suitable potential contributors. Fortunately, many of my first-choice authors accepted the invitation to contribute. Like all editors of multi-author volumes, I recognize that obtaining contributors follows an S-type curve of asymptotic saturation when the number of willing contributors is plotted as a function of time. The saturation point is, however, never reached and as a consequence, Dear Reader, you will also find some topics of some relevance which are not explicitly treated in this book (but, believe me, I have considered them).
Download or read book Polymer Fillers and Stiffening Agents written by Chris Defonseka and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-07-20 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents both established and emerging technologies which show the immense possibilities of using non-traditional fillers and stiffening agents in the plastics industry. After an introduction to basic polymer chemistry, a range of non-petroleum-based fillers and stiffening agents for polymer products are identified and their optimal applications given.
Download or read book Mineral Fillers in Thermoplastics I written by Josef Jancar and published by Springer Science & Business Media. This book was released on 1998-12-04 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, a growing number of engineering applications of light weight and energy efficient plastics can be found in high quality parts vital to the func tioning of entire equipments and structures. Improved mechanical properties, especially balance of stiffness and toughness, are among the most frequently desired features of the new materials. In addition, reduced flammability is con sidered the single most important requirement for further expansion of plastics into large volume and demanding markets such as construction and mass trans port. Production of power cables also requires flame retardant cable jacketing plastics to replace or at least to reduce consumption of environmentally unsound PVC. The two principal ways to achieve the goals mentioned above include the development of completely new thermoplastic polymers and various modifica tions of the existing ones. Development and commercialization of a new ther moplastic require mobilization of large human and financial resources, the lat ter being within the range from $100 million to $10 billion, in comparison to $100 thousand to $10 million needed to develop and commercialize polymeric mate rial with prescribed end use properties using physical or chemical modification of an existing plastic. In addition, the various markets utilizing thermoplastics demand large flexibility in material properties with only moderate volumes, at the best.
Download or read book Handbook of Fillers written by George Wypych and published by William Andrew. This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: An up-to-date, exhaustive reference of all solids capable of changing the physical and chemical properties of materials. This one volume presents the information needed to market, develop, select, manufacture and apply these versatile new grades of fillers. Contains all the fundamentals and latest advances in fillers technology and the products in which they are used.
Download or read book Polymer Applications of Renewable Resource Materials written by Charles E. Carraher Jr. and published by Springer. This book was released on 2013-02-17 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: For there is hope of a tree, If it be cut down, That it will sprout again And that the tender branch Thereof will not cease. Job XIV (7) Mankind has been blessed with a multitude of resources. In the beginning he utilized almost soley replenishable items such as vegetation and animal protein, for both nourishment and shelter. Gradually, such metals as copper and iron were developed and replaced wood as a material of construction. Cement and glass, although more plentiful than other minerals, also replaced the use of growing sub stances. Coal and oil became the primary sources of heat and power. Closer to the focus of this book, petroleum products began to replace the vegetable oils, tannin, wool, cotton, leather, silk, rubber, etc. in a host of applications. Surely, it was argued, the new materials did the job better and cheaper. What they didn't say is that soon we would run out of oil. In any case, research on growing natural products, now called renewable resources, slowed, and these industries sought only to maintain their status quo. The 20th Century saw an unprecedented emphasis and dependence on nonrenewable resources as energy sources (petroleum, coal, ura nium) and the fabric of technology (drugs, clothing, shelter, tires, computer parts). The predawn of the 21st Century brings a reali zation that a cyclic shift back towards the use of renewable re sources for technological application is in order.
Download or read book Fillers for Plastics written by William Charles Wake and published by . This book was released on 1971 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Waste wood derived Fillers for Plastics written by and published by . This book was released on 1996 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Additives For Plastics written by Raymond Seymour and published by Elsevier. This book was released on 2012-12-02 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additives for Plastics: Volume 1, State of the Art summarizes the state of the art about additives for plastics, including coupling agents for fillers and plasticizers, as well as colorants, silicas, cellulose fiber, whiskers, and microfibers. Stabilizers for weather, fungal, and heat resistance and resistance to ultraviolet radiation are also considered. This volume is comprised of 13 chapters; the first of which introduces the reader to nonreinforcing fillers such as carbon black, wood flour, alpha cellulose, calcium carbonate, and natural and synthetic silicates. The discussion then turns to synthetic and naturally occurring silicas, short cellulose fibers for reinforcing polymers, and asbestiform fillers. Whiskers and microfibers are the subject of the subsequent chapter, with emphasis on their differences and similarities, application in various plastics, and prospects. Silane and nonsilane coupling agents, nonfiller additives, plasticizers, biocides, and heat stabilizers are also examined. This volume also evaluates rutile titanium dioxide and other white pigments with regard to the opacification and coloring of plastics. This book will be of vital interest to those who are closely associated with the plastics industry as well as those who are concerned with the design, fabrication, and use of plastics.
Download or read book Metal Filled Polymers written by S.K. Bhattacharya and published by CRC Press. This book was released on 1986-09-10 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discussing every aspect of the fabrication, properties, and use of metal-filled polymers, this unique single-source reference covers the full range of current and potential applications -- from the insulation to the conduction level. Metal-Filled Polymers describes the most recent experimentation in determining the shielding effectiveness of plastics filled with metal ... compares the advantages of metal fillers over conventional nonmetallic fillers ... delineates the concept of interphase (which has recently found importance in predicting the mechanism of crack growth) ... and shows how the geometry and orientation of filler particles affect conduction, strength, and stiffness under various loading conditions. In addition, the book explains how the filler interacts with the matrix to improve composite properties ... and details the theoretical development of both mechanical and thermal properties. Encompassing the entire literature on their respective topics, contributions by eminent researchers focus on the very latest state-of-the-art data and relate findings directly to practical uses in current technology. Metal-Filled Polymers will prove a vital reference for plastics, materials, process, chemical, design, and mechanical engineers and managers in the plastics and metals industries. It will also be a useful resource for manufacturers of conductive composites for EMI shielding, and professional seminars and graduate-level courses in composite materials. Book jacket.
Download or read book Encyclopedia of Polymers and Composites written by Sanjay Palsule and published by Springer. This book was released on 2021-01-14 with total page 12000 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Encyclopedia of Polymers and Composites provides all details of Polymeric Materials Science and Technology including historical developments, present status, and future potential. In 15 volumes, the Encyclopedia of Polymers and Composites covers: polymeric materials, engineering polymer blends, particulate and fibrous polymeric composite materials, that are the key materials for technology in the 21st Century. Fundamentals of structure of these materials are presented. Properties and effects of various parameters, like time and temperature on them are explained. Testing and Characterization of these materials as per global standard for various applications is presented. Individual polymers, blends, and composites are described, and several representative examples are also provided. The Encyclopedia also provides directions for future developments. It is organized in alphabetical order.
Download or read book Particulate filled Polymer Composites written by Roger N. Rothon and published by Addison Wesley Longman. This book was released on 1995 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Novel and Traditional Fillers for Plastics written by Geoffrey Pritchard and published by iSmithers Rapra Publishing. This book was released on 1999 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report discusses the solid particulate and fibrous fillers used in plastics. All the leading mineral fillers are covered with carbon-based fillers covered briefly. A survey of agrowaste and related materials is provided.
Download or read book Additives for Plastics written by Jan Stipek and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the most important substances used as additives in the plastics industry to improve the properties of polymer-based materials. Each chapter deals with a particular type of additive based on the type's definition, structure, and classification according to main effects on polymeric materials. The mechanism of the additive efficiency and its effects on basic properties of specific polymers are discussed and a survey of its important qualities and practical applications is given. Each chapter is introduced by a theoretical analysis of the practical and technological importance of the ad ditive. The book is mainly intended for students in technical colleges, polytechnics and universities who are studying plastics technology and macromolecular chemistry as part of their general curriculum and for technologists in industry engaged in development, sales, technical service and production functions, and applications of plastics. An elementary knowledge of chemistry, physical chemistry and polymer science at the technical college level is assumed. Prague and Montreal, December 1982 J. Stepek, H. Daoust Table of Contents Introduction .
