Download or read book Fieldbus Systems and Their Applications 2005 written by Miguel Leon Chavez and published by Elsevier. This book was released on 2006-11-23 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: The FeT series – Fieldbus Systems and their Applications Conferences started in 1995 in Vienna, Austria. Since FeT'2001 in Nancy, France, the conference became an IFAC – International Federation of Automatic Control sponsored event. These proceedings focus on 13 sessions, covering, fieldbus based systems, services, protocols and profiles, system integration with heterogeneous networks, management, real-time, safety, dependability and security, distributed embedded systems, wireless networking for field applications, education and emerging trends. Two keynote speeches from experts outside Europe are featured. The first one entitled "Bandwidth Allocation Scheme in Fieldbuses" by Prof. Seung Ho, Hanyang University, Korea. The second by, Prof. I.F. Akyildiz, Georgia Institute of Technology, USA, "Key Technologies for Wireless Networking in the Next Decade". - Featuring 36 high quality papers from 13 countries - Keynote speech reflecting the current interest of wireless communications for industrial applications - FeT'2005 was supported by a International Program Committee of around 40 members from 15 countries, 6 from Europe

Download or read book Fieldbus Systems and Their Applications 2003 written by D Dietrich and published by Elsevier. This book was released on 2003-12-18 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: A proceedings volume from the 6th IFAC International Conference, Puebla, Mexico, 14-25 November 2005

Download or read book Software Engineering for Automotive Systems written by P. Sivakumar and published by CRC Press. This book was released on 2022-08-08 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software Engineering for Automotive Systems: Principles and Applications discusses developments in the field of software engineering for automotive systems. This reference text presents detailed discussion of key concepts including timing analysis and reliability, validation and verification of automotive systems, AUTOSAR architecture for electric vehicles, automotive grade Linux for connected cars, open-source architecture in the automotive software industry, and communication protocols in the automotive software development process. Aimed at senior undergraduate and graduate students in the fields of electrical engineering, electronics and communication engineering, and automobile engineering, this text: Provides the fundamentals of automotive software architectures. Discusses validation and verification of automotive systems. Covers communication protocols in the automotive software development process. Discusses AUTOSAR architecture for electric vehicles. Examines open-source architecture in the automotive software industry.

Download or read book Model Driven Development of Reliable Automotive Services written by Manfred Broy and published by Springer. This book was released on 2008-07-17 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software development for the automotive domain has become the enabling te- nologyforalmostallsafety-criticalandcomfortfunctionso?eredtothecustomer. Ninety percentofallinnovations inautomotive systems aredirectly or indirectly enabled by embedded software. The numbers of serious accidents have declined in recent years, despite constantly increasing tra?c; this is correlated with the introduction of advanced, software-enabled functionality for driver assistance, such as electronic stability control. Software contributes signi?cantly to the - tomotive value chain. By 2010 it is estimated that software will make up 40% of the value creation of automotive electrics/electronics. However, with the large number of software-enabled functions, their int- actions, and the corresponding networking and operating infrastructure, come signi?cant complexities both during the automotive systems engineering p- cess and at runtime. A central challenge for automotive systems development is the scattering of functionality across multiple subsystems, such as electronic control units (ECUs) and the associated networks. As an example, consider the central locking systems (CLS), whose functionality is spread out over up to 19 di?erent ECUs in some luxury cars. Of course, this includes advanced functi- ality, such as seat positioning and radio tuning according to driver presets upon entry, as well as unlocking in case of a detected impact or accident. However, thisexampledemonstratesthatmodernautomotivesystemsbridgecomfort-and safety-critical functionality. This induces particular demands on safety and - curity, and, in general, software and systems quality. The resulting challenges and opportunities were discussed, in depth, at the second Automotive Software Workshop San Diego (ASWSD) 2006, on whose results we report here.

Download or read book Embedded Systems Handbook written by Richard Zurawski and published by CRC Press. This book was released on 2017-12-19 with total page 837 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considered a standard industry resource, the Embedded Systems Handbook provided researchers and technicians with the authoritative information needed to launch a wealth of diverse applications, including those in automotive electronics, industrial automated systems, and building automation and control. Now a new resource is required to report on current developments and provide a technical reference for those looking to move the field forward yet again. Divided into two volumes to accommodate this growth, the Embedded Systems Handbook, Second Edition presents a comprehensive view on this area of computer engineering with a currently appropriate emphasis on developments in networking and applications. Those experts directly involved in the creation and evolution of the ideas and technologies presented offer tutorials, research surveys, and technology overviews that explore cutting-edge developments and deployments and identify potential trends. This second self-contained volume of the handbook, Network Embedded Systems, focuses on select application areas. It covers automotive field, industrial automation, building automation, and wireless sensor networks. This volume highlights implementations in fast-evolving areas which have not received proper coverage in other publications. Reflecting the unique functional requirements of different application areas, the contributors discuss inter-node communication aspects in the context of specific applications of networked embedded systems. Those looking for guidance on preliminary design of embedded systems should consult the first volume: Embedded Systems Design and Verification.

Download or read book Holonic and Multi Agent Systems for Manufacturing written by Vladimir Marik and published by Springer Science & Business Media. This book was released on 2007-08-22 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the refereed proceedings of the Third International Conference on Industrial Applications of Holonic and Multi-Agent Systems held in September 2007. The 39 full papers were selected from among 63 submissions. They are organized into topical sections covering theoretical and methodological issues, algorithms and technologies, implementation and validation, applications, and supply chain management.

Download or read book Green Mobile Devices and Networks written by Hrishikesh Venkataraman and published by CRC Press. This book was released on 2016-04-19 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: While battery capacity is often insufficient to keep up with the power-demanding features of the latest mobile devices, powering the functional advancement of wireless devices requires a revolution in the concept of battery life and recharge capability. Future handheld devices and wireless networks should be able to recharge themselves automaticall

Download or read book Embedded Systems Handbook 2 Volume Set written by Richard Zurawski and published by CRC Press. This book was released on 2018-10-08 with total page 1462 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past few years there has been an dramatic upsurge in research and development, implementations of new technologies, and deployments of actual solutions and technologies in the diverse application areas of embedded systems. These areas include automotive electronics, industrial automated systems, and building automation and control. Comprising 48 chapters and the contributions of 74 leading experts from industry and academia, the Embedded Systems Handbook, Second Edition presents a comprehensive view of embedded systems: their design, verification, networking, and applications. The contributors, directly involved in the creation and evolution of the ideas and technologies presented, offer tutorials, research surveys, and technology overviews, exploring new developments, deployments, and trends. To accommodate the tremendous growth in the field, the handbook is now divided into two volumes. New in This Edition: Processors for embedded systems Processor-centric architecture description languages Networked embedded systems in the automotive and industrial automation fields Wireless embedded systems Embedded Systems Design and Verification Volume I of the handbook is divided into three sections. It begins with a brief introduction to embedded systems design and verification. The book then provides a comprehensive overview of embedded processors and various aspects of system-on-chip and FPGA, as well as solutions to design challenges. The final section explores power-aware embedded computing, design issues specific to secure embedded systems, and web services for embedded devices. Networked Embedded Systems Volume II focuses on selected application areas of networked embedded systems. It covers automotive field, industrial automation, building automation, and wireless sensor networks. This volume highlights implementations in fast-evolving areas which have not received proper coverage in other publications. Reflecting the unique functional requirements of different application areas, the contributors discuss inter-node communication aspects in the context of specific applications of networked embedded systems.

Download or read book Design Technology for Heterogeneous Embedded Systems written by Gabriela Nicolescu and published by Springer Science & Business Media. This book was released on 2012-02-02 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design technology to address the new and vast problem of heterogeneous embedded systems design while remaining compatible with standard “More Moore” flows, i.e. capable of simultaneously handling both silicon complexity and system complexity, represents one of the most important challenges facing the semiconductor industry today and will be for several years to come. While the micro-electronics industry, over the years and with its spectacular and unique evolution, has built its own specific design methods to focus mainly on the management of complexity through the establishment of abstraction levels, the emergence of device heterogeneity requires new approaches enabling the satisfactory design of physically heterogeneous embedded systems for the widespread deployment of such systems. Heterogeneous Embedded Systems, compiled largely from a set of contributions from participants of past editions of the Winter School on Heterogeneous Embedded Systems Design Technology (FETCH), proposes a necessarily broad and holistic overview of design techniques used to tackle the various facets of heterogeneity in terms of technology and opportunities at the physical level, signal representations and different abstraction levels, architectures and components based on hardware and software, in all the main phases of design (modeling, validation with multiple models of computation, synthesis and optimization). It concentrates on the specific issues at the interfaces, and is divided into two main parts. The first part examines mainly theoretical issues and focuses on the modeling, validation and design techniques themselves. The second part illustrates the use of these methods in various design contexts at the forefront of new technology and architectural developments.

Download or read book Challenges for Assistive Technology written by Gorka Eizmendi and published by IOS Press. This book was released on 2007 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the 21st century Assistive Technology (AT) should be defined as a scientific and technologic approach to the development of products and services oriented to support the elderly and people with disabilities in their daily activities, maximizing their personal autonomy, independence, health and quality of life.

Download or read book Industrial Communication Systems written by Bogdan M. Wilamowski and published by CRC Press. This book was released on 2018-10-03 with total page 963 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Industrial Electronics Handbook, Second Edition, Industrial Communications Systems combines traditional and newer, more specialized knowledge that helps industrial electronics engineers develop practical solutions for the design and implementation of high-power applications. Embracing the broad technological scope of the field, this collection explores fundamental areas, including analog and digital circuits, electronics, electromagnetic machines, signal processing, and industrial control and communications systems. It also facilitates the use of intelligent systems—such as neural networks, fuzzy systems, and evolutionary methods—in terms of a hierarchical structure that makes factory control and supervision more efficient by addressing the needs of all production components. Enhancing its value, this fully updated collection presents research and global trends as published in the IEEE Transactions on Industrial Electronics Journal, one of the largest and most respected publications in the field. Modern communication systems in factories use many different—and increasingly sophisticated—systems to send and receive information. Industrial Communication Systems spans the full gamut of concepts that engineers require to maintain a well-designed, reliable communications system that can ensure successful operation of any production process. Delving into the subject, this volume covers: Technical principles Application-specific areas Technologies Internet programming Outlook, including trends and expected challenges Other volumes in the set: Fundamentals of Industrial Electronics Power Electronics and Motor Drives Control and Mechatronics Intelligent Systems

Download or read book The Industrial Electronics Handbook Five Volume Set written by Bogdan M. Wilamowski and published by CRC Press. This book was released on 2011-03-04 with total page 4071 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial electronics systems govern so many different functions that vary in complexity-from the operation of relatively simple applications, such as electric motors, to that of more complicated machines and systems, including robots and entire fabrication processes. The Industrial Electronics Handbook, Second Edition combines traditional and new

Download or read book Contributions to Ubiquitous Computing written by Bernd Krämer and published by Springer. This book was released on 2007-04-18 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book takes a holistic view on mobile and distributed computing systems. It presents innovative solutions at all system layers. These range from hardware over vertical and horizontal infrastructure services and novel middleware techniques to various types of application software. Some chapters address core properties of ubiquitous applications including mobility, self-healing and self-organization of both technical and social-technical systems.

Download or read book Integrated Models for Information Communication Systems and Networks Design and Development written by Atayero, Aderemi Aaron Anthony and published by IGI Global. This book was released on 2013-06-30 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: With current advancements in the modeling and simulation of systems and networks, researchers and developers are better able to determine the probable state of current systems and envision the state of future systems during the design stage. The uses and accuracies of these models are essential to every aspect of communication systems. Integrated Models for Information Communication Systems and Networks: Design and Development explores essential information and current research findings on information communication systems and networks. This reference source aims to assist professionals in the desire to enhance their knowledge of modeling at systems level with the aid of modern software packages.

Download or read book Industrial Communication Technology Handbook written by Richard Zurawski and published by CRC Press. This book was released on 2017-12-19 with total page 1760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring contributions from major technology vendors, industry consortia, and government and private research establishments, the Industrial Communication Technology Handbook, Second Edition provides comprehensive and authoritative coverage of wire- and wireless-based specialized communication networks used in plant and factory automation, automotive applications, avionics, building automation, energy and power systems, train applications, and more. New to the Second Edition: 46 brand-new chapters and 21 substantially revised chapters Inclusion of the latest, most significant developments in specialized communication technologies and systems Addition of new application domains for specialized networks The Industrial Communication Technology Handbook, Second Edition supplies readers with a thorough understanding of the application-specific requirements for communication services and their supporting technologies. It is useful to a broad spectrum of professionals involved in the conception, design, development, standardization, and use of specialized communication networks as well as academic institutions engaged in engineering education and vocational training.

Download or read book Handbook of Real Time and Embedded Systems written by Insup Lee and published by CRC Press. This book was released on 2007-07-23 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-time and embedded systems are essential to our lives, from controlling car engines and regulating traffic lights to monitoring plane takeoffs and landings to providing up-to-the-minute stock quotes. Bringing together researchers from both academia and industry, the Handbook of Real-Time and Embedded Systems provides comprehensive covera

Download or read book Automotive Embedded Systems Handbook written by Nicolas Navet and published by CRC Press. This book was released on 2017-12-19 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Clear Outline of Current Methods for Designing and Implementing Automotive Systems Highlighting requirements, technologies, and business models, the Automotive Embedded Systems Handbook provides a comprehensive overview of existing and future automotive electronic systems. It presents state-of-the-art methodological and technical solutions in the areas of in-vehicle architectures, multipartner development processes, software engineering methods, embedded communications, and safety and dependability assessment. Divided into four parts, the book begins with an introduction to the design constraints of automotive-embedded systems. It also examines AUTOSAR as the emerging de facto standard and looks at how key technologies, such as sensors and wireless networks, will facilitate the conception of partially and fully autonomous vehicles. The next section focuses on networks and protocols, including CAN, LIN, FlexRay, and TTCAN. The third part explores the design processes of electronic embedded systems, along with new design methodologies, such as the virtual platform. The final section presents validation and verification techniques relating to safety issues. Providing domain-specific solutions to various technical challenges, this handbook serves as a reliable, complete, and well-documented source of information on automotive embedded systems.