Download or read book Fault Diagnosis and Failure Prognostics of Lithium ion Battery Based on Least Squares Support Vector Machine and Memory Particle Filter Framework written by Mohammed Ali Lskaafi and published by . This book was released on 2015 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: A novel data driven approach is developed for fault diagnosis and remaining useful life (RUL) prognostics for lithium-ion batteries using Least Square Support Vector Machine (LS-SVM) and Memory-Particle Filter (M-PF). Unlike traditional data-driven models for capacity fault diagnosis and failure prognosis, which require multidimensional physical characteristics, the proposed algorithm uses only two variables: Energy Efficiency (EE), and Work Temperature. The aim of this novel framework is to improve the accuracy of incipient and abrupt faults diagnosis and failure prognosis. First, the LSSVM is used to generate residual signal based on capacity fade trends of the Li-ion batteries. Second, adaptive threshold model is developed based on several factors including input, output model error, disturbance, and drift parameter. The adaptive threshold is used to tackle the shortcoming of a fixed threshold. Third, the M-PF is proposed as the new method for failure prognostic to determine Remaining Useful Life (RUL). The M-PF is based on the assumption of the availability of real-time observation and historical data, where the historical failure data can be used instead of the physical failure model within the particle filter. The feasibility of the framework is validated using Li-ion battery prognostic data obtained from the National Aeronautic and Space Administration (NASA) Ames Prognostic Center of Excellence (PCoE). The experimental results show the following: (1) fewer data dimensions for the input data are required compared to traditional empirical models; (2) the proposed diagnostic approach provides an effective way of diagnosing Li-ion battery fault; (3) the proposed prognostic approach can predict the RUL of Li-ion batteries with small error, and has high prediction accuracy; and, (4) the proposed prognostic approach shows that historical failure data can be used instead of a physical failure model in the particle filter.

Download or read book A Bayesian Least Squares Support Vector Machines Based Framework for Fault Diagnosis and Failure Prognosis written by Taimoor Saleem Khawaja and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A high-belief low-overhead Prognostics and Health Management (PHM) system is desired for online real-time monitoring of complex non-linear systems operating in a complex (possibly non-Gaussian) noise environment. This thesis presents a Bayesian Least Squares Support Vector Machine (LS-SVM) based framework for fault diagnosis and failure prognosis in nonlinear, non-Gaussian systems. The methodology assumes the availability of real-time process measurements, definition of a set of fault indicators, and the existence of empirical knowledge (or historical data) to characterize both nominal and abnormal operating conditions. An efficient yet powerful Least Squares Support Vector Machine (LS-SVM) algorithm, set within a Bayesian Inference framework, not only allows for the development of real-time algorithms for diagnosis and prognosis but also provides a solid theoretical framework to address key concepts related to classication for diagnosis and regression modeling for prognosis. SVM machines are founded on the principle of Structural Risk Minimization (SRM) which tends to nd a good trade-o between low empirical risk and small capacity. The key features in SVM are the use of non-linear kernels, the absence of local minima, the sparseness of the solution and the capacity control obtained by optimizing the margin. The Bayesian Inference framework linked with LS-SVMs allows a probabilistic interpretation of the results for diagnosis and prognosis. Additional levels of inference provide the much coveted features of adaptability and tunability of the modeling parameters. The two main modules considered in this research are fault diagnosis and failure prognosis. With the goal of designing an efficient and reliable fault diagnosis scheme, a novel Anomaly Detector is suggested based on the LS-SVM machines. The proposed scheme uses only baseline data to construct a 1-class LS-SVM machine which, when presented with online data, is able to distinguish between normal behavior and any abnormal or novel data during real-time operation. The results of the scheme are interpreted as a posterior probability of health (1 - probability of fault). As shown through two case studies in Chapter 3, the scheme is well suited for diagnosing imminent faults in dynamical non-linear systems. Finally, the failure prognosis scheme is based on an incremental weighted Bayesian LS-SVR machine. It is particularly suited for online deployment given the incremental nature of the algorithm and the quick optimization problem solved in the LS-SVR algorithm. By way of kernelization and a Gaussian Mixture Modeling (GMM) scheme, the algorithm can estimate (possibly) non-Gaussian posterior distributions for complex non-linear systems. An efficient regression scheme associated with the more rigorous core algorithm allows for long-term predictions, fault growth estimation with confidence bounds and remaining useful life (RUL) estimation after a fault is detected. The leading contributions of this thesis are (a) the development of a novel Bayesian Anomaly Detector for efficient and reliable Fault Detection and Identification (FDI) based on Least Squares Support Vector Machines, (b) the development of a data-driven real-time architecture for long-term Failure Prognosis using Least Squares Support Vector Machines, (c) Uncertainty representation and management using Bayesian Inference for posterior distribution estimation and hyper-parameter tuning, and finally (d) the statistical characterization of the performance of diagnosis and prognosis algorithms in order to relate the efficiency and reliability of the proposed schemes.

Download or read book Fault Diagnosis and Failure Prognostics of Lithium ion Battery written by Mohammed Lskaafi and published by . This book was released on 2016-03-08 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fuzzy Filter Based State of Energy Estimation for Lithium Ion Batteries written by Shunli Wang and published by Cambridge Scholars Publishing. This book was released on 2024-03-21 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: Awareness of the safety issues of lithium-ion batteries is crucial in the development of new energy technologies, and real-time and high-precision State of Energy (SOE) estimation is not only a prerequisite for battery safety, but also serves as the basis for predicting the remaining driving range of electric vehicles and aircrafts. In order to achieve real-time and accurate estimation of the energy state of lithium-ion batteries, this book improves the calculation method of the open-circuit voltage in the traditional second-order RC equivalent circuit model. It also combines a fuzzy controller and a dual-weighted multi-innovation algorithm to optimize the traditional Centralized Kalman Filter (CKF) algorithm in terms of the aspects of convergence speed, estimation accuracy, and algorithm robustness. This enables the precise estimation of SOE and the maximum available energy. The content of this book provides theoretical support for the development of new energy initiatives.

Download or read book Neural Network Based State of Charge and State of Health Estimation written by Qi Huang and published by Cambridge Scholars Publishing. This book was released on 2023-11-16 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: To deal with environmental deterioration and energy crises, developing clean and sustainable energy resources has become the strategic goal of the majority of countries in the global community. Lithium-ion batteries are the modes of power and energy storage in the new energy industry, and are also the main power source of new energy vehicles. State-of-charge (SOC) and state-of-health (SOH) are important indicators to measure whether a battery management system (BMS) is safe and effective. Therefore, this book focuses on the co-estimation strategies of SOC and SOH for power lithium-ion batteries. The book describes the key technologies of lithium-ion batteries in SOC and SOH monitoring and proposes a collaborative optimization estimation strategy based on neural networks (NN), which provide technical references for the design and application of a lithium-ion battery power management system. The theoretical methods in this book will be of interest to scholars and engineers engaged in the field of battery management system research.

Download or read book A Particle Filtering based Framework for On line Fault Diagnosis and Failure Prognosis written by Marcos Eduardo Orchard and published by . This book was released on 2007 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents an on-line particle-filtering-based framework for fault diagnosis and failure prognosis in nonlinear, non-Gaussian systems. The methodology assumes the definition of a set of fault indicators, which are appropriate for monitoring purposes, the availability of real-time process measurements, and the existence of empirical knowledge (or historical data) to characterize both nominal and abnormal operating conditions. The incorporation of particle-filtering (PF) techniques in the proposed scheme not only allows for the implementation of real time algorithms, but also provides a solid theoretical framework to handle the problem of fault detection and isolation (FDI), fault identification, and failure prognosis. Founded on the concept of sequential importance sampling (SIS) and Bayesian theory, PF approximates the conditional state probability distribution by a swarm of points called particles and a set of weights representing discrete probability masses. Particles can be easily generated and recursively updated in real time, given a nonlinear process dynamic model and a measurement model that relates the states of the system with the observed fault indicators.

Download or read book Multidimensional Lithium Ion Battery Status Monitoring written by Shunli Wang and published by CRC Press. This book was released on 2022-12-28 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multidimensional Lithium-Ion Battery Status Monitoring focuses on equivalent circuit modeling, parameter identification, and state estimation in lithium-ion battery power applications. It explores the requirements of high-power lithium-ion batteries for new energy vehicles and systematically describes the key technologies in core state estimation based on battery equivalent modeling and parameter identification methods of lithium-ion batteries, providing a technical reference for the design and application of power lithium-ion battery management systems. Reviews Li-ion battery characteristics and applications. Covers battery equivalent modeling, including electrical circuit modeling and parameter identification theory Discusses battery state estimation methods, including state of charge estimation, state of energy prediction, state of power evaluation, state of health estimation, and cycle life estimation Introduces equivalent modeling and state estimation algorithms that can be applied to new energy measurement and control in large-scale energy storage Includes a large number of examples and case studies This book has been developed as a reference for researchers and advanced students in energy and electrical engineering.

Download or read book State Estimation Strategies in Lithium ion Battery Management Systems written by Kailong Liu and published by Elsevier. This book was released on 2023-07-14 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: State Estimation Strategies in Lithium-ion Battery Management Systems presents key technologies and methodologies in modeling and monitoring charge, energy, power and health of lithium-ion batteries. Sections introduce core state parameters of the lithium-ion battery, reviewing existing research and the significance of the prediction of core state parameters of the lithium-ion battery and analyzing the advantages and disadvantages of prediction methods of core state parameters. Characteristic analysis and aging characteristics are then discussed. Subsequent chapters elaborate, in detail, on modeling and parameter identification methods and advanced estimation techniques in different application scenarios. Offering a systematic approach supported by examples, process diagrams, flowcharts, algorithms, and other visual elements, this book is of interest to researchers, advanced students and scientists in energy storage, control, automation, electrical engineering, power systems, materials science and chemical engineering, as well as to engineers, R&D professionals, and other industry personnel. - Introduces lithium-ion batteries, characteristics and core state parameters - Examines battery equivalent modeling and provides advanced methods for battery state estimation - Analyzes current technology and future opportunities

Download or read book Fault Detection Diagnosis and Prognosis written by Fausto Pedro García Márquez and published by BoD – Books on Demand. This book was released on 2020-02-05 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the main concepts, state of the art, advances, and case studies of fault detection, diagnosis, and prognosis. This topic is a critical variable in industry to reach and maintain competitiveness. Therefore, proper management of the corrective, predictive, and preventive politics in any industry is required. This book complements other subdisciplines such as economics, finance, marketing, decision and risk analysis, engineering, etc. The book presents real case studies in multiple disciplines. It considers the main topics using prognostic and subdiscipline techniques. It is essential to link these topics with the areas of finance, scheduling, resources, downtime, etc. to increase productivity, profitability, maintainability, reliability, safety, and availability, and reduce costs and downtime. Advances in mathematics, modeling, computational techniques, dynamic analysis, etc. are employed analytically. Computational techniques, dynamic analysis, probabilistic methods, and mathematical optimization techniques are expertly blended to support the analysis of prognostic problems with defined constraints and requirements. The book is intended for graduate students and professionals in industrial engineering, business administration, industrial organization, operations management, applied microeconomics, and the decisions sciences, either studying maintenance or needing to solve large, specific, and complex maintenance management problems as part of their jobs. The work will also be of interest to researches from academia.

Download or read book A Hybrid Prognostic Approach for Battery Health Monitoring and Remaining useful life Prediction written by Mohamed Ahwiadi and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Lithium-ion (Li-ion) batteries are commonly used in various industrial and domestic applications, such as portable communication devices, medical equipment, and electric vehicles. However, the Li-ion battery performance degrades over time due to the aging phenomenon, which may lead to system performance degradation or even safety issues, especially in vehicle and industrial applications. Reliable battery health monitoring and prognostics systems are extremely useful for improving battery performance, to diagnose the battery's state-of-health (SOH), and to predict its remaining-useful-life (RUL). In general, it is challenging to accurately track the battery's nonlinear degradation features as battery degradation parameters are almost inaccessible to measure using general sensors. In addition, a battery is an electro-chemical system whose properties vary with variations in environmental and operating conditions. Although there are some techniques proposed in the literature for battery SOH estimation and RUL analysis, these techniques have clear limitations in applications, due to reasons such as lack of proper representation of the posterior probability density functions to capture and model the nonlinear dynamic system of Li-ion batteries. In addition, these techniques cannot effectively deal with the time-varying system properties, especially for long-term predictions. To tackle these problems, a novel hybrid prognostic framework has been developed in this PhD work for battery SOH monitoring and RUL prediction. It integrates two new models: the model-based filtering method and the evolving fuzzy rule-based prediction technique. The strategy is to propose and use more efficient techniques in each module to improve processing, accuracy and reliability. Firstly, a newly enhanced mutated particle filter technique is proposed to enhance the performance of particle filter technique and improve the modeling accuracy of the battery system's degradation process. It consists of three novel aspects: an enhanced mutation approach, a selection scheme, and an outlier detection method. Secondly, an adaptive evolving fuzzy technique is suggested for long-term time series forecasting. It has a novel error-assessment method to control the fuzzy cluster/rule generation process-also, a new optimization technique to enhance incremental learning and improve modeling efficiency. Finally, a new hybrid prognostic framework integrates the merits of both proposed techniques to capture the underlying physics of the battery systems for its SOH estimation, and improve the prognosis of dynamic system for long-term prediction of Li-ion battery RUL. The effectiveness of the proposed techniques is verified through simulation tests using some commonly used-benchmark models and battery databases in this field, such as the one from the National Aeronautics and Space Administration (NASA) Ames Prognostic Center of Excellence. Test results have shown that the proposed hybrid prognostics framework can effectively capture the battery SOH degradation process, and can accurately predict its RUL.

Download or read book Fault Diagnosis of Lithium Ion Battery Using Multiple Model Adaptive Estimation written by Amardeep Singh Sidhu and published by . This book was released on 2013 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lithium ion (Li-ion) batteries have become integral parts of our lives; they are widely used in applications like handheld consumer products, automotive systems, and power tools among others. To extract maximum output from a Li-ion battery under optimal conditions it is imperative to have access to the state of the battery under every operating condition. Faults occurring in the battery when left unchecked can lead to irreversible, and under extreme conditions, catastrophic damage. In this thesis, an adaptive fault diagnosis technique is developed for Li-ion batteries. For the purpose of fault diagnosis the battery is modeled by using lumped electrical elements under the equivalent circuit paradigm. The model takes into account much of the electro-chemical phenomenon while keeping the computational effort at the minimum. The diagnosis process consists of multiple models representing the various conditions of the battery. A bank of observers is used to estimate the output of each model; the estimated output is compared with the measurement for generating residual signals. These residuals are then used in the multiple model adaptive estimation (MMAE) technique for generating probabilities and for detecting the signature faults. The effectiveness of the fault detection and identification process is also dependent on the model uncertainties caused by the battery modeling process. The diagnosis performance is compared for both the linear and nonlinear battery models. The non-linear battery model better captures the actual system dynamics and results in considerable improvement and hence robust battery fault diagnosis in real time. Furthermore, it is shown that the non-linear battery model enables precise battery condition monitoring in different degrees of over-discharge.

Download or read book Electrochemical Model Based Fault Diagnosis of Lithium Ion Battery written by Md Ashiqur Rahman and published by . This book was released on 2015 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: A gradient free function optimization technique, namely particle swarm optimization (PSO) algorithm, is utilized in parameter identification of the electrochemical model of a Lithium-Ion battery having a LiCoO2 chemistry. Battery electrochemical model parameters are subject to change under severe or abusive operating conditions resulting in, for example, Navy over-discharged battery, 24-hr over-discharged battery, and over-charged battery. It is important for a battery management system to have these parameters changes fully captured in a bank of battery models that can be used to monitor battery conditions in real time. In this work, PSO methodology has been used to identify four electrochemical model parameters that exhibit significant variations under severe operating conditions. The identified battery models were validated by comparing the model output voltage with the experimental output voltage for the stated operating conditions. These identified conditions of the battery were then used to monitor condition of the battery that can aid the battery management system (BMS) in improving overall performance. An adaptive estimation technique, namely multiple model adaptive estimation (MMAE) method, was implemented for this purpose. In this estimation algorithm, all the identified models were simulated for a battery current input profile extracted from the hybrid pulse power characterization (HPPC) cycle simulation of a hybrid electric vehicle (HEV). A partial differential algebraic equation (PDAE) observer was utilized to obtain the estimated voltage, which was used to generate the residuals. Analysis of these residuals through MMAE provided the probability of matching the current battery operating condition to that of one of the identified models. Simulation results show that the proposed model based method offered an accurate and effective fault diagnosis of the battery conditions. This type of fault diagnosis, which is based on the models capturing true physics of the battery electrochemistry, can lead to a more accurate and robust battery fault diagnosis and help BMS take appropriate steps to prevent battery operation in any of the stated severe or abusive conditions.

Download or read book Fault Diagnosis for Lithium ion Battery System of Hybrid Electric Aircraft written by Ye Cheng and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aircraft industry, commercial utilities, and federal agencies, such as NASA, are investing in aircraft solutions for a more sustainable, cleaner, and quieter transportation solutions for people and cargo. One option that is actively considered is that of a hybrid-electric aircraft, and in this application the energy storage system (ESS) may consist of thousands or even tens of thousands of cells. These cells are then connected in series and in parallel to form modules, which then are assembled into battery packs to meet energy and power requirements, resulting in systems that are large-dimensional and that have complex interconnections. Because of differences in cell electrical and thermal characteristics and in cell aging, the energy/power density and the durability and safety of the battery packs will be reduced to a certain extent compared with individual cells. It is therefore very important to design a battery management system (BMS) that can enable cell level monitoring and that is capable of diagnosing faults that are considered to be critical. This dissertation presents some design aspects for a battery pack intended for aviation application and its BMS considering safety, health and safety monitoring, and diagnostics. Generalized equivalent circuit models (GECMs) are used to predict the overall battery pack performance and to investigate the different behavior of different battery pack architectures in the case of cell-to-cell parameter variations or in the case of faults. A comparative analysis between different battery pack architectures is conducted as well, to determine a better architecture that is more reliable in the case of a cell fault. A set of critical faults is selected for fault modeling to augment the battery cell model and pack model. The battery pack model with fault modeling is then used in a Software-In-the-Loop (SIL) framework under the NASA ULI hybrid turbo-electric aircraft case scenario with the purpose of understanding the performance of the battery system under different fault cases. A systematic model-based diagnostic methodology called structural analysis is used to determine the sensor placement strategies that are needed by the BMS to improve its ability to monitor and diagnose the battery system. The degree of analytical redundancy (AR) in the battery system that can be used for diagnostic strategies is determined using the tools of structural analysis. Structural models of different battery pack architectures are used to study how different measurements (current, voltage, and temperature) may improve the ability to monitor and diagnose a battery system. Possible sensor placement strategies that would enable the diagnosis of a set of critical faults for different battery pack topologies are analyzed as well. The optimal sensor sets that can meet both typical BMS requirements and also provide the necessary FDI requirements for the two fundamental battery architectures are determined using this novel methodology. A distributed fault diagnosis scheme is then proposed for a lithium-ion battery pack that can effectively detect and isolate individual cell faults, connection faults and sensor faults. The fault diagnostic algorithms are evaluated within the SIL simulation framework to show the functionalities of the proposed FDI scheme. This dissertation represents the first systematic approach to the design of battery systems for aviation applications that explicitly considers fault diagnosis and fault tolerance.

Download or read book Advances in Lithium Ion Batteries for Electric Vehicles written by Haifeng Dai and published by Elsevier. This book was released on 2024-02-15 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Lithium-Ion Batteries for Electric Vehicles: Degradation Mechanism, Health Estimation, and Lifetime Prediction examines the electrochemical nature of lithium-ion batteries, including battery degradation mechanisms and how to manage the battery state of health (SOH) to meet the demand for sustainable development of electric vehicles. With extensive case studies, methods and applications, the book provides practical, step-by-step guidance on battery tests, degradation mechanisms, and modeling and management strategies. The book begins with an overview of Li-ion battery aging and battery aging tests before discussing battery degradation mechanisms and methods for analysis. Further methods are then presented for battery state of health estimation and battery lifetime prediction, providing a range of case studies and techniques. The book concludes with a thorough examination of lifetime management strategies for electric vehicles, making it an essential resource for students, researchers, and engineers needing a range of approaches to tackle battery degradation in electric vehicles. - Evaluates the cause of battery degradation from the material level to the cell level - Explains key battery basic lifetime test methods and strategies - Presents advanced technologies of battery state of health estimation

Download or read book Adaptive Model based State Monitoring and Prognostics for Lithium ion Batteries written by Jiahao Li and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mathematical Modeling of Lithium Batteries written by Krishnan S. Hariharan and published by Springer. This book was released on 2017-12-28 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is unique to be the only one completely dedicated for battery modeling for all components of battery management system (BMS) applications. The contents of this book compliment the multitude of research publications in this domain by providing coherent fundamentals. An explosive market of Li ion batteries has led to aggressive demand for mathematical models for battery management systems (BMS). Researchers from multi-various backgrounds contribute from their respective background, leading to a lateral growth. Risk of this runaway situation is that researchers tend to use an existing method or algorithm without in depth knowledge of the cohesive fundamentals—often misinterpreting the outcome. It is worthy to note that the guiding principles are similar and the lack of clarity impedes a significant advancement. A repeat or even a synopsis of all the applications of battery modeling albeit redundant, would hence be a mammoth task, and cannot be done in a single offering. The authors believe that a pivotal contribution can be made by explaining the fundamentals in a coherent manner. Such an offering would enable researchers from multiple domains appreciate the bedrock principles and forward the frontier. Battery is an electrochemical system, and any level of understanding cannot ellipse this premise. The common thread that needs to run across—from detailed electrochemical models to algorithms used for real time estimation on a microchip—is that it be physics based. Build on this theme, this book has three parts. Each part starts with developing a framework—often invoking basic principles of thermodynamics or transport phenomena—and ends with certain verified real time applications. The first part deals with electrochemical modeling and the second with model order reduction. Objective of a BMS is estimation of state and health, and the third part is dedicated for that. Rules for state observers are derived from a generic Bayesian framework, and health estimation is pursued using machine learning (ML) tools. A distinct component of this book is thorough derivations of the learning rules for the novel ML algorithms. Given the large-scale application of ML in various domains, this segment can be relevant to researchers outside BMS domain as well. The authors hope this offering would satisfy a practicing engineer with a basic perspective, and a budding researcher with essential tools on a comprehensive understanding of BMS models.

Download or read book Machine Learning Support for Fault Diagnosis of System on Chip written by Patrick Girard and published by Springer Nature. This book was released on 2023-03-13 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a state-of-the-art guide to Machine Learning (ML)-based techniques that have been shown to be highly efficient for diagnosis of failures in electronic circuits and systems. The methods discussed can be used for volume diagnosis after manufacturing or for diagnosis of customer returns. Readers will be enabled to deal with huge amount of insightful test data that cannot be exploited otherwise in an efficient, timely manner. After some background on fault diagnosis and machine learning, the authors explain and apply optimized techniques from the ML domain to solve the fault diagnosis problem in the realm of electronic system design and manufacturing. These techniques can be used for failure isolation in logic or analog circuits, board-level fault diagnosis, or even wafer-level failure cluster identification. Evaluation metrics as well as industrial case studies are used to emphasize the usefulness and benefits of using ML-based diagnosis techniques.