Download or read book Fault Detection Diagnosis and Identification of Induction Machines Using Signal Processing Techniques and Artificial Neural Networks written by Shobhanandan Jha and published by . This book was released on 2010 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Application of Signal Processing Tools and Artificial Neural Network in Diagnosis of Power System Faults written by Nabamita Banerjee Roy and published by CRC Press. This book was released on 2021-07-21 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explores methods of fault identification through programming and simulation in MATLAB Examines signal processing tools and their applications with examples Provides knowledge of artificial neural networks and their applications with illustrations Uses PNN and BPNN to identify the different types of faults and obtain their corresponding locations Discusses the programming of signal processing using Wavelet Transform and S-Transform
Download or read book Fault Diagnosis of Induction Motors written by Jawad Faiz and published by IET. This book was released on 2017-08-29 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive, structural approach to fault diagnosis strategy. The different fault types, signal processing techniques, and loss characterisation are addressed in the book. This is essential reading for work with induction motors for transportation and energy.
Download or read book Advanced Condition Monitoring and Fault Diagnosis of Electric Machines written by Irfan, Muhammad and published by IGI Global. This book was released on 2018-09-14 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reliability of induction motors is a major requirement in many industrial applications. It is especially important where an unexpected breakdown might result in the interruption of critical services such as military operations, transportation, aviation, and medical applications. Advanced Condition Monitoring and Fault Diagnosis of Electric Machines is a collection of innovative research on various issues related to machinery condition monitoring, signal processing and conditioning, instrumentation and measurements, and new trends in condition monitoring. It also pays special attention to the fault identification process. While highlighting topics including spectral analysis, electrical engineering, and bearing faults, this book is an ideal reference source for electrical engineers, mechanical engineers, researchers, and graduate-level students seeking current research on various methods of maintaining machinery.
Download or read book Fault Detection and Diagnosis in Industrial Systems written by L.H. Chiang and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Early and accurate fault detection and diagnosis for modern chemical plants can minimize downtime, increase the safety of plant operations, and reduce manufacturing costs. This book presents the theoretical background and practical techniques for data-driven process monitoring. It demonstrates the application of all the data-driven process monitoring techniques to the Tennessee Eastman plant simulator, and looks at the strengths and weaknesses of each approach in detail. A plant simulator and problems allow readers to apply process monitoring techniques.
Download or read book Proceedings of the 5th International Conference on Electrical Engineering and Control Applications Volume 1 written by Salim Ziani and published by Springer Nature. This book was released on with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrical Machines Diagnosis written by Jean-Claude Trigeassou and published by John Wiley & Sons. This book was released on 2013-02-07 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monitoring and diagnosis of electrical machine faults is a scientific and economic issue which is motivated by objectives for reliability and serviceability in electrical drives. This book provides a survey of the techniques used to detect the faults occurring in electrical drives: electrical, thermal and mechanical faults of the electrical machine, faults of the static converter and faults of the energy storage unit. Diagnosis of faults occurring in electrical drives is an essential part of a global monitoring system used to improve reliability and serviceability. This diagnosis is performed with a large variety of techniques: parameter estimation, state observation, Kalman filtering, spectral analysis, neural networks, fuzzy logic, artificial intelligence, etc. Particular emphasis in this book is put on the modeling of the electrical machine in faulty situations. Electrical Machines Diagnosis presents original results obtained mainly by French researchers in different domains. It will be useful as a guideline for the conception of more robust electrical machines and indeed for engineers who have to monitor and maintain electrical drives. As the monitoring and diagnosis of electrical machines is still an open domain, this book will also be very useful to researchers.
Download or read book Neural Network Based Incipient Fault Detection of Induction Motors written by Mohd Rokonuzzaman and published by . This book was released on 1995 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fault Diagnosis and Detection written by Mustafa Demetgul and published by BoD – Books on Demand. This book was released on 2017-05-31 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mass production companies have become obliged to reduce their production costs and sell more products with lower profit margins in order to survive in competitive market conditions. The complexity and automation level of machinery are continuously growing. This development calls for some of the most critical issues that are reliability and dependability of automatic systems. In the future, machines will be monitored remotely, and computer-aided techniques will be employed to detect faults in the future, and also there will be unmanned factories where machines and systems communicate to each other, detect their own faults, and can remotely intercept their faults. The pioneer studies of such systems are fault diagnosis studies. Thus, we hope that this book will contribute to the literature in this regard.
Download or read book Proceedings of the 4th International Conference on Electrical Engineering and Control Applications written by Sofiane Bououden and published by Springer Nature. This book was released on 2020-09-29 with total page 1257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers papers presented during the 4th International Conference on Electrical Engineering and Control Applications. It covers new control system models, troubleshooting tips and complex system requirements, such as increased speed, precision and remote capabilities. Additionally, the papers discuss not only the engineering aspects of signal processing and various practical issues in the broad field of information transmission, but also novel technologies for communication networks and modern antenna design. This book is intended for researchers, engineers and advanced postgraduate students in the fields of control and electrical engineering, computer science and signal processing, as well as mechanical and chemical engineering.
Download or read book Signal Processing for Fault Detection and Diagnosis in Electric Machines and Systems written by Mohamed Benbouzid and published by IET. This book was released on 2020-12-09 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 5 chapters that discusses the following topics: Parametric signal processing approach; The signal demodulation techniques; Kullback-Leibler divergence for incipient fault diagnosis; Higher-order spectra and Fault detection and diagnosis based on principal component analysis.
Download or read book Fault Detection written by Wei Zhang and published by BoD – Books on Demand. This book was released on 2010-03-01 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, a number of innovative fault diagnosis algorithms in recently years are introduced. These methods can detect failures of various types of system effectively, and with a relatively high significance.
Download or read book Signal Processing and Analysis of Electrical Circuit written by Adam Glowacz and published by MDPI. This book was released on 2020-03-13 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue with 35 published articles shows the significance of the topic “Signal Processing and Analysis of Electrical Circuit”. This topic has been gaining increasing attention in recent times. The presented articles can be categorized into four different areas: signal processing and analysis methods of electrical circuits; electrical measurement technology; applications of signal processing of electrical equipment; fault diagnosis of electrical circuits. It is a fact that the development of electrical systems, signal processing methods, and circuits has been accelerating. Electronics applications related to electrical circuits and signal processing methods have gained noticeable attention in recent times. The methods of signal processing and electrical circuits are widely used by engineers and scientists all over the world. The constituent papers represent a significant contribution to electronics and present applications that can be used in industry. Further improvements to the presented approaches are required for realizing their full potential.
Download or read book Conference Proceedings of 2021 International Joint Conference on Energy Electrical and Power Engineering written by Wenping Cao and published by Springer Nature. This book was released on 2022-10-12 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will be a collection of the papers presented in the 2021 International Joint Conference on Energy, Electrical and Power Engineering (CoEEPE’21) , covering new and renewable energy, electrical and power engineering. It is expected to report the latest technological developments in the fields developed by academic researchers and industrial practitioners, with a focus on component design, optimization and control algorithms in electrical and power engineering systems. The applications and dissemination of these technologies will benefit research society as new research directions are getting more and more inter-disciplinary which require researchers from different research areas to come together and form ideas jointly. It will also benefit the electrical engineering and power industry as we are now experiencing a new wave of industrial revelation, that is, electrification, intelligentization and digitalisation of our transport, manufacturing process and way of thinking.
Download or read book Condition Monitoring and Diagnostic Engineering Management written by A. Starr and published by Elsevier. This book was released on 2001-09-14 with total page 1021 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Proceedings contains the papers presented at the 14th International Conference on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2001), held in Manchester, UK, on 4-6 September 2001. COMADEM 2001 builds on the excellent reputation of previous conferences in this series, and is essential for anyone working in the field of condition monitoring and maintenance management.The scope of the conference is truly interdisciplinary. The Proceedings contains papers from six continents, written by experts in industry and academia the world over, bringing together the latest thoughts on topics including: Condition-based maintenance Reliability centred maintenance Asset management Industrial case studies Fault detection and diagnosis Prognostics Non-destructive evaluation Integrated diagnostics Vibration Oil and debris analysis Tribology Thermal techniques Risk assessment Structural health monitoring Sensor technology Advanced signal processing Neural networks Multivariate statistics Data compression and fusion This Proceedings also contains a wealth of industrial case studies, and the latest developments in education, training and certification. For more information on COMADEM's aims and scope, please visit http://www.comadem.com
Download or read book Deep Learning Applications Volume 2 written by M. Arif Wani and published by Springer Nature. This book was released on 2020-09-24 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the 18th IEEE International Conference on Machine Learning and Applications (IEEE ICMLA 2019). It focuses on deep learning networks and their application in domains such as healthcare, security and threat detection, fault diagnosis and accident analysis, and robotic control in industrial environments, and highlights novel ways of using deep neural networks to solve real-world problems. Also offering insights into deep learning architectures and algorithms, it is an essential reference guide for academic researchers, professionals, software engineers in industry, and innovative product developers.
Download or read book Fault Diagnosis Prognosis and Reliability for Electrical Machines and Drives written by Elias G. Strangas and published by John Wiley & Sons. This book was released on 2021-11-19 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Diagnosis, Prognosis, and Reliability for Electrical Machines and Drives An insightful treatment of present and emerging technologies in fault diagnosis and failure prognosis In Fault Diagnosis, Prognosis, and Reliability for Electrical Machines and Drives, a team of distinguished researchers delivers a comprehensive exploration of current and emerging approaches to fault diagnosis and failure prognosis of electrical machines and drives. The authors begin with foundational background, describing the physics of failure, the motor and drive designs and components that affect failure and signals, signal processing, and analysis. The book then moves on to describe the features of these signals and the methods commonly used to extract these features to diagnose the health of a motor or drive, as well as the methods used to identify the state of health and differentiate between possible faults or their severity. Fault Diagnosis, Prognosis, and Reliability for Electrical Machines and Drives discusses the tools used to recognize trends towards failure and the estimation of remaining useful life. It addresses the relationships between fault diagnosis, failure prognosis, and fault mitigation. The book also provides: A thorough introduction to the modes of failure, how early failure precursors manifest themselves in signals, and how features extracted from these signals are processed A comprehensive exploration of the fault diagnosis, the results of characterization, and how they used to predict the time of failure and the confidence interval associated with it A focus on medium-sized drives, including induction, permanent magnet AC, reluctance, and new machine and drive types Perfect for researchers and students who wish to study or practice in the rea of electrical machines and drives, Fault Diagnosis, Prognosis, and Reliability for Electrical Machines and Drives is also an indispensable resource for researchers with a background in signal processing or statistics.
