Download or read book Failure Analysis and Prevention written by Aidy Ali and published by BoD – Books on Demand. This book was released on 2017-12-20 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers recent advancement methods used in analysing the root cause of engineering failures and the proactive suggestion for future failure prevention. The techniques used especially non-destructive testing such X-ray are well described. The failure analysis covers materials for metal and composites for various applications in mechanical, civil and electrical applications. The modes of failures that are well explained include fracture, fatigue, corrosion and high-temperature failure mechanisms. The administrative part of failures is also presented in the chapter of failure rate analysis. The book will bring you on a tour on how to apply mechanical, electrical and civil engineering fundamental concepts and to understand the prediction of root cause of failures. The topics explained comprehensively the reliable test that one should perform in order to investigate the cause of machines, component or material failures at the macroscopic and microscopic level. I hope the material is not too theoretical and you find the case study, the analysis will assist you in tackling your own failure investigation case.
Download or read book Metal Failures written by A. J. McEvily and published by John Wiley & Sons. This book was released on 2002 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: comprehensive coverage of both the "how" and "why" of metal failures Metal Failures gives engineers the intellectual tools and practical understanding needed to analyze failures from a structural point of view. Its proven methods of examination and analysis enable investigators to: * Reach correct, fact-based conclusions on the causes of metal failures * Present and defend these conclusions before highly critical bodies * Suggest design improvements that may prevent future failures Analytical methods presented include stress analysis, fracture mechanics, fatigue analysis, corrosion science, and nondestructive testing. Numerous case studies illustrate the application of basic principles of metallurgy and failure analysis to a wide variety of real-world situations. Readers learn how to investigate and analyze failures that involve: * Alloys and coatings * Brittle and ductile fractures * Thermal and residual stresses * Creep and fatigue * Corrosion, hydrogen embrittlement, and stress-corrosion cracking This useful professional reference is also an excellent learning tool for senior-level students in mechanical, materials, and civil engineering.
Download or read book How to Organize and Run a Failure Investigation written by Daniel P. Dennies and published by ASM International. This book was released on 2005 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learning the proper steps for organizing a failure investigation ensures success. Failure investigations cross company functional boundaries and are an integral component of any design or manufacturing business operation. Well-organized and professionally conducted investigations are essential for solving manufacturing problems and assisting in redesigns. This book outlines a proven systematic approach to failure investigation. It explains the relationship between various failure sources (corrosion, for example) and the organization and conduct of the investigation. It provides a learning platform for engineers from all disciplines: materials, design, manufacturing, quality, and management. The examples in this book focus on the definition of and requirements for a professionally performed failure analysis of a physical object or structure. However, many of the concepts have much greater utility than for investigating the failure of physical objects. For example, the book provides guidance in areas such as learning how to define objectives, negotiating the scope of investigation, examining the physical evidence, and applying general problem-solving techniques.
Download or read book Failure of Materials in Mechanical Design written by Jack A. Collins and published by John Wiley & Sons. This book was released on 1993-10-06 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure of Materials in Mechanical Design: Analysis, Prediction, Prevention, 2nd Edition, covers the basic principles of failure of metallic and non-metallic materials in mechanical design applications. Updated to include new developments on fracture mechanics, including both linear-elastic and elastic-plastic mechanics. Contains new material on strain and crack development and behavior. Emphasizes the potential for mechanical failure brought about by the stresses, strains and energy transfers in machine parts that result from the forces, deflections and energy inputs applied.
Download or read book ASM Handbook written by and published by . This book was released on 1990 with total page 1024 pages. Available in PDF, EPUB and Kindle. Book excerpt: These volumes cover the properties, processing, and applications of metals and nonmetallic engineering materials. They are designed to provide the authoritative information and data necessary for the appropriate selection of materials to meet critical design and performance criteria.
Download or read book Failure Analysis written by Jose Luis Otegui and published by Springer Science & Business Media. This book was released on 2014-01-02 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the failures of structural elements, i.e. those components whose primary mission is to withstand mechanical loads. The book is intended as a self-contained source for those with different technical grades, engineers and scientists but also technicians in the field can benefit from its reading.
Download or read book Failure Prevention Through Education written by James Scutti and published by ASM International(OH). This book was released on 2000 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design, manufacturing, maintenance, and operating professionals often do not have the opportunity for meaningful dialoge. Even when a complete failure analysis is performed, insights gained about how to improve a process or material specification is often not relayed back to the designers. Many failures could be prevented if those responsible for making critical decisions had more information, especially regarding previous problems. This May 2000 conference brought together product designers and materials engineers to share knowledge gained over the last 20 years in fractography, stress analysis, and interdisciplinary approaches to engineering in general and failure analysis in particular.Contents: The Roots of Failure Interdisciplinary Failure Analysis Keeping 'an open mind' During Root Cause Analysis Legal Definitions of Failure for Designers and Manufacturers Codes, Standards and Test Methods Comprehensive Failure Analysis on a Complex System Critical Factors in the Design Process New Tools for Design Failure Modes and Effects Credibility Analysis Scientific Materials Selection Processes Materials Specification and Failure Case Histories Characteristics of Castings and Forgings Working with Heat Treaters Using the Right Material to 'Make It Like the Drawing' Machining Issues Finishing Processes Unanticipated Service Conditions Reliability Service Conditions.
Download or read book Systems Failure Analysis written by Joseph Berk and published by ASM International. This book was released on 2009-01-01 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machinery Failure Analysis Handbook written by Luiz Octavio Amaral Affonso and published by Elsevier. This book was released on 2013-11-25 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding why and how failures occur is critical to failure prevention, because even the slightest breakdown can lead to catastrophic loss of life and asset as well as widespread pollution. This book helps anyone involved with machinery reliability, whether in the design of new plants or the maintenance and operation of existing ones, to understand why process equipment fails and thereby prevent similar failures.
Download or read book Failure Analysis of Engineering Structures written by V. Ramachandran and published by ASM International. This book was released on 2005 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: Printbegrænsninger: Der kan printes 10 sider ad gangen og max. 40 sider pr. session
Download or read book Fractography and Failure Analysis written by Jorge Luis González-Velázquez and published by Springer. This book was released on 2018-03-19 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents fractography and failure analysis at a level that is accessible for non-expert readers, without losing scientific rigor. It offers a comprehensive description of fracture surfaces in engineering materials, with an emphasis on metals, and of the methodology for the observation of fracture surfaces. It also discusses in detail the main fracture mechanisms and their corresponding fracture surfaces, including brittle, ductile, fatigue, and environmental fractures. The last chapter is dedicated to the use of fractography in determining of the causes component failure. In modern engineering, the analysis of fractured components is a common practice in many fields, such as integrity management systems, materials science research, and failure investigations. As such this book is useful for engineers, scientists, engineering students, loss adjuster surveyors and any professional dealing with fractured components.
Download or read book Characterization and Failure Analysis of Plastics written by ASM International and published by ASM International. This book was released on 2003-01-01 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: The selection and application of engineered materials is an integrated process that requires an understanding of the interaction between materials properties, manufacturing characteristics, design considerations, and the total life cycle of the product. This reference book on engineering plastics provides practical and comprehensive coverage on how the performance of plastics is characterized during design, property testing, and failure analysis. The fundamental structure and properties of plastics are reviewed for general reference, and detailed articles describe the important design factors, properties, and failure mechanisms of plastics. The effects of composition, processing, and structure are detailed in articles on the physical, chemical, thermal, and mechanical properties. Other articles cover failure mechanisms such as: crazing and fracture; impact loading; fatigue failure; wear failures, moisture related failure; organic chemical related failure; photolytic degradation; and microbial degradation. Characterization of plastics in failure analysis is described with additional articles on analysis of structure, surface analysis, and fractography.
Download or read book Metallography in Failure Analysis written by J. McCall and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Detailed analyses of failures of material components have proved to be valuable in many ways; by preventing further failures, by assessing the validity of designs and the selection of materials, by uncovering shortcomings in the processing of the materials in volved through characterizations of defects, and by revealing problems introduced during the manufacture or fabrication of the component. Increased recognition of the value of performing failure analyses has caused the field to develop into a very active area of tech nical endeavor. Failure analysis has been employed in numerous different technical dis ciplines and has proven beneficial. The increased activity has caused many new and im proved methods for performing these analyses to be developed. Among these are many methods which can be characterized as generally belonging to the field of metallography. In recognition of the important role that metallography plays in the performance of failure analyses, the absence of a text that specifically discusses this subject, and the be lief that communication of information on the subject would be of technical interest, The American Society for Metals and The International Metallographic Society co sponsored a symposium. The intent was to bring together world-recognized authorities working in various aspects of the failure analysis and metallographic fields to share meth ods they use, results they have obtained, and the purposes to which they utilized these results. The symposium, entitled "Metallography in Failure Analysis", was held in Hous ton, Texas, USA, July 17-18, 1977.
Download or read book Failure Analysis of Integrated Circuits written by Lawrence C. Wagner and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This "must have" reference work for semiconductor professionals and researchers provides a basic understanding of how the most commonly used tools and techniques in silicon-based semiconductors are applied to understanding the root cause of electrical failures in integrated circuits.
Download or read book Adhesion Aspects of Polymeric Coatings written by K.L. Mittal and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume chronicles the proceedings of the Symposium on Adhesion Aspects of Polymeric Coatings held under the auspices of the Electrochemical Society in Minneapolis, MN, May 10-15, 1981. This event was cosponsored by the Dielectric and Insulation, and Electrothermics and Metallurgy Divisions. Polymeric coatings are used for a number of purposes, e. g. , decorative, protective, functional (as dielectrics or insulators) and a special application of polymeric (organic) coatings is their use as lithographic materials for making integrated circuit elements. Irrespective of the purpose of the coating, it must adhere well to the underlying substrate. So the need to under stand the factors which influence adhesion of organic coatings and the ways to attain desired adhesion is quite manifest. This Symposium was designed to bring together scientists and technologists interested in the adhesion aspects of polymeric coatings, to provide a forum for discussion of latest findings, and to provide an opportunity for cross-pollination of ideas. The technical program contained a total of 46 papers by authors from various corners of the world. The program comprised both invited overviews and contributed original research papers, as this blend is the best way to present the state of knowledge of a topic. The invited speakers were selected so as to represent widely differ ing disciplines and interests and they hailed from various aca demic and industrial research laboratories.
Download or read book Surface Wear written by R. Chattopadhyay and published by ASM International. This book was released on 2001-01-01 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Describes the surface properties controlling the wear processes in different environments, and presents techniques for reducing specific type of wear through modification of surface properties. The author characterizes the energy, morphology, and composition of surfaces, then identifies the mechanisms of wear caused by adhesion, abrasion, erosion, corrosion, and heat. The main section of the book discusses the various surface protection technologies: strain hardening, thermally assisted diffusion processes, hardening by thermal treatment, thin film coatings, and thick film overlays. The final chapters address metal, plastic and ceramic composites that resist wear, and provide a wear diagnosis methodology. Annotation copyrighted by Book News Inc., Portland, OR
Download or read book Metals Handbook written by and published by . This book was released on 1939 with total page 1803 pages. Available in PDF, EPUB and Kindle. Book excerpt:
