Download or read book Evaluation of May Two Piece AM2 Landing Mat written by Robert Walter Grau and published by . This book was released on 1968 with total page 59 pages. Available in PDF, EPUB and Kindle. Book excerpt: The investigation was conducted to evaluate two-piece AM2 landing mat. The mat was fabricated from two 12-in.-wide extrusions welded together to form a 2-ft-wide plank. A test section consisting of one sand and two clay subgrade items with various CBR strength values was constructed and surfaced with the mat. The test section was subjected to uniform-coverage and single-line traffic representing operations of an aircraft having a 60,000-lb gross weight with a single-wheel main-gear assembly load of 27,000 lb with a 30-7.7 tire inflated to 400 psi. Based on the results obtained in this study, it is concluded that the May two-piece AM2 will sustain 1600 cycles (188 coverages) of aircraft operations with a 27,000-lb single-wheel load and 400-psi tire-inflation pressure when placed on a subgrade having a CBR of 4.1 or greater throughout the period of traffic, the May two-piece AM2 will sustain 1600 passes of a 27,000-lb single-wheel load with a tire-inflation pressure of 400 psi in a single path located 1-1/2 ft or more from the mat end joints when placed on a subgrade having a CBR of 4.3 or greater throughout the period of traffic, and general behavior of the mat in these tests was not materially affected by the two-piece nature of the planks. (Author).
Download or read book Evaluation of Harvey Two piece Landing Mat AM2 written by Cecil D. Burns and published by . This book was released on 1966 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: The object of the investigation is to evaluate the performance of the Harvey two-piece AM-2 landing mat under accelerated traffic tests. (Author).
Download or read book Evaluation of Harvey and Kaiser Production AM2 Landing Mat written by Cecil D. Burns and published by . This book was released on 1969 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaluation of Three piece AM2 Aluminum Landing Mat written by William N. Brabston and published by . This book was released on 1967 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: The investigation was conducted to evaluate three-piece AM2 landing mat. The mat was fabricated from three 8-in.-wide extrusions welded together to form a 2-ft-wide plank. A test section consisting of one sand item and three clay subgrade items with various CBR strength values was constructed and surfaced with the three-piece mat. The test section was subjected to uniform-coverage and single-line traffic representing operations of an aircraft having a 60,000-lb gross weight with a single-wheel main gear assembly load of 27,000 lb with a 30.7.7 tire inflated to 400 psi. (Author).
Download or read book Evaluation of Various Sizes of Harvey Aluminum AM2 Landing Mat written by William B. Fenwick and published by . This book was released on 1966 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: This investigation was conducted to determine the optimum panel size for the AM2 mat fabricated by Harvey Aluminum Company, Torrance, Calif. The basic AM2 mat was designed to sustain 1600 operational cycles of an aircraft having a gross weight of 60,000 lb with a single-wheel main-gear-assembly load of 27,000 lb and a 30-7.7 tire inflated to 400 psi. A test section consisting of three items with different subgrade strengths and surfaced with three different size mat panels was constructed and subjected to 188 coverages (equivalent to 1600 cycles of aircraft operations) of accelerated traffic of a 27,000-lb single-wheel load with a 30-7.7 tire inflated to 400 pri. The mat was also tested for its ability to sustain 1600 passes of a 39,000-lb single-wheel load applied in a single track to represent the calculated loading that would be imposed on a landing mat during launching of a 60,000-lb aircraft by catapult.
Download or read book Evaluation of Washington Aluminum Company AM2 Landing Mat written by William B. Fenwick and published by . This book was released on 1965 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objectives of the investigation reported herein were to: (a) Evaluate the performance of the Washington AM2 mat under accelerated traffic tests with the wheel loadings contemplated under the SATS concept. (b) Compare the performance of the Washington mat with that of the original experimental AM2 mat designed and fabricated by Harvey. (c) Compare the quality of the extrusions furnished to Washington by Alcoa and Dow Chemical Co.
Download or read book Evaluation of Parameters Affecting Horizontal Stability of Landing Mats written by Yu-Tang Chou and published by . This book was released on 1976 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaluation of Harvey Modified AM2 Landing Mat written by William B. Fenwick and published by . This book was released on 1965 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: This investigation was conducted to evaluate a modified and connector on the AM2 landing mat fabricated by Harvey Aluminum, Inc., Torrance, Calif. A test section, consisting of three clay subgrade items with different strengths and one sand item, was constructed and surfaced with the modified AM2 mat. The test section was subjected to traffic representing 1600 operational cycles of an aircraft having a 60,000-lb gross weight with a single-wheel main-gear assembly load of 27,000 lb and a 30-7.7 tire inflated to 400 psi.
Download or read book Evaluation of Harvey New Profile AM2 Landing Mat written by Cecil D. Burns and published by . This book was released on 1970 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt: This investigation was conducted to evaluate the new-profile AM2 landing mat, which was extruded and fabricated by Harvey Aluminum Company, Torrance, Calif. Three methods were used to attach end connectors to the 2-ft-wide main extrusion to form either the 2- by 12-ft or 2- by 6-ft planks. These methods were electron beam welded with inserts (EBI), electron beam welded without inserts (EB), and metal-inert-gas fusion welded without inserts (MIG). Two test sections, each consisting of two clay subgrade items at a strength of 4 CBR, were constructed and surfaced with the new-profile mat. Items 1 and 2 of test section 1 were surfaced with the EBI and EB mat, respectively. Both items in test section 2 were surfaced with the MIG welded mat, where two mat laying patterns were used so that the traffic lane in item 1 did not include any end joints and the traffic lane in item 2 incorporated 20 end joints. Each test section was subjected to uniform-coverage traffic representing operations of an aircraft having a 60,000-lb gross weight with a single-wheel main-gear assembly load of 27,000 lb with a 30x7.7 tire inflated to 400 psi.
Download or read book Evaluation of AM2 Landing Mat Replacement Panels and Keylock Assemblies written by William B. Fenwick and published by . This book was released on 1966 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study was conducted to evaluate replacement panels and keylock assemblies as accessories for use with AM2 landing mat in the construction of forward airfields. It was also desired to evaluate the capability of the AM2 mat to withstand traffic when laid in a longitudinal direction. A test section with a 10-CBR subgrade and the AM2 mat laid in both longitudinal and transverse directions, with the accessories included, was constructed and subjected to accelerated traffic of a 27,000-lb single-wheel load with a 30.00-7.7 tire inflated to 400 psi.
Download or read book List of Publications of the U S Army Engineer Waterways Experiment Station written by U.S. Army Engineer Waterways Experiment Station and published by . This book was released on 1976 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaluation of AM 2 Mod 5 Production Landing Mat written by Charles W. Dorman and published by . This book was released on 1986 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaluation of Butler AM2 Landing Mat written by William B. Fenwick and published by . This book was released on 1966 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study was conducted to compare the performance of aluminum landing mat fabricated by Butler Manufacturing Co. The primary method of comparison was by using CBR design curves which were developed to represent 1600 operational cycles of an aircraft having a 60,000-lb gross weight with a single-wheel, main-gear assembly load of 27,000 lb and a 30-7.7 tire inflated to 400 psi. CBR design curves were also developed for 1600 passes of a 39,000-lb single-wheel load applied in a single track to represent the calculated loading imposed on the landing mat during launching of the 60,000-lb aircraft by catapult. (Author).
Download or read book Evaluation of Washington Aluminum Company Inc Production AM2 Landing Mat written by Cecil D. Burns and published by . This book was released on 1969 with total page 43 pages. Available in PDF, EPUB and Kindle. Book excerpt: The investigation was conducted to evaluate the performance of AM2 landing mat from production-line fabrication. A test section, consisting of two clay subgrade items with different strengths and one sand item, was constructed and surfaced with the AM2 mat. The test section was subjected to traffic representing 1600 operational cycles of an aircraft having a 60,000-lb gross weight with a single-wheel main-gear assembly load of 27,000 lb and a 30-7.7 tire inflated to 400 psi. Based on the results obtained in this investigation, it is concluded that the AM2 mat will sustain 1600 cycles (188 coverages) of uniformly distributed aircraft operations with a 27,000-lb single-wheel load and 400-psi tire inflation pressure when placed on a clay subgrade having a CBR of 4.0 or greater, the AM2 mat will sustain 1600 passes of a 27,000-lb single-wheel load with 400-psi tire inflation pressure applied in a single path when placed on a clay subgrade having a CBR of 4.2 or greater, with slight core damage occurring in a small percentage of the planks, and the AM2 mat will sustain 1600 passes or 188 coverages of a 27,000-lb single-wheel load with 400-psi tire inflation pressure when placed on a loose sand subgrade. (Author).
Download or read book List of Publications of the U S Army Engineer Waterways Experiment Station written by Waterways Experiment Station (U.S.) and published by . This book was released on 1973 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Criteria for Inspection Evaluation Classification and Reuse of Used Airfield Landing Mat written by Philip J. Vedros and published by . This book was released on 1970 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book List of Publications of the U S Army Engineers Waterway Experiment Station written by United States. Army. Corps of Engineers and published by . This book was released on 1976 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: