Download or read book Ethylene Glycol Production from Ethylene Cost Analysis MEG E11A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Monoethylene Glycol (MEG) production from ethylene This process consists of a two-steps process. First, ethylene is oxidized with oxygen to produce ethylene oxide, which is further hydrolyzed to MEG. Diethylene glycol (DEG) and triethylene glycol (TEG) are also generated as by-products in the process. This report was developed based essentially on the following reference(s): (1) "Ethylene Oxide", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition (2) "Ethylene Glycol", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Shell Master, Scientific Design, Oxidation, Dow METEOR

Download or read book Ethylene Glycol Production from Ethylene Cost Analysis MEG E12A written by Intratec and published by Intratec. This book was released on 2016-03-01 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Monoethylene Glycol (MEG) production from ethylene The process examined is similar to Shell OMEGA process. In this process, ethylene is first oxidized with oxygen to produce ethylene oxide, which is further converted to MEG. This report was developed based essentially on the following reference(s): (1) US Patent 8329959, issued to Shell in 2012 (2) US Patent 8217190, issued to Shell in 2012 Keywords: Ethene, Shell, OMEGA, Only MEG Advantage, Oxidation, Catalytic Process

Download or read book Ethylene Glycol Production from Syngas Cost Analysis MEG E41A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Monoethylene Glycol (MEG) production from synthesis gas (syngas) In this process, syngas is carbonylated to dimethyl oxalate intermediate, which is then hydrogenated to MEG. This report was developed based essentially on the following reference(s): (1) US Patent 4453026, issued to Ube Industries Ltd. in 1984 (2) CN Patent 102380382, issued to Shenyang University of Chemical Technology in 2012 Keywords: 1,2-Ethanediol, Carbonylation, Hydrogenation, Nitric Oxide, Ube, Fujian Research Institute on the Structure of Matter, FJIRSM, Union Carbide, ARCO, Gasification

Download or read book Ethylene Glycol Production from Ethylene Oxide Cost Analysis MEG E32A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Monoethylene Glycol (MEG) production from ethylene oxide. The process examined is similar to Shell OMEGA process. In this process ethylene glycol is produced from ethylene oxide, with ethylene carbonate as an intermediate. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) Keywords: Shell, OMEGA, Only MEG Advantage, Oxidation, Catalytic Process, Mitsubishi

Download or read book Ethylene Glycol Production from Ethylene Oxide Cost Analysis MEG E31A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Monoethylene Glycol (MEG) production from ethylene oxide. In this process ethylene oxide is hydrolyzed to MEG. Diethylene glycol (DEG) and triethylene glycol (TEG) are also generated as by-products in the process. This report was developed based essentially on the following reference(s): (1) "Ethylene Oxide", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition (2) "Ethylene Glycol", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Shell Master, Scientific Design, Oxidation

Download or read book Ethylene Glycol Production from Ethylene Cost Analysis MEG E13A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Monoethylene Glycol (MEG) production from ethylene. The process examined is similar to Shell OMEGA process. In this process, ethylene is first oxidized with oxygen to produce ethylene oxide. Part of the ethylene oxide generated is sold as a by-product and the remaining part is converted to MEG as the final product. This report was developed based essentially on the following reference(s): (1) US Patent 8329959, issued to Shell in 2012 (2) US Patent 8217190, issued to Shell in 2012 Keywords: Ethene, Shell, OMEGA, Only MEG Advantage, Oxidation, Catalytic Process

Download or read book Ethylene Oxide Production from Ethylene Cost Analysis EO E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Ethylene Oxide production from ethylene. The process examined is a typical direct oxidation process. In the process examined, pure oxygen is used as the oxidizing agent. This report was developed based essentially on the following reference(s): "Ethylene Oxide", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Dow Meteor, Shell Master, Scientific Design

Download or read book Ethylene Production via Steam Cracking of Ethane Cost Analysis Ethylene E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of polymer grade (PG) Ethylene production from ethane feedstock using a typical steam cracking process. In this process, ethane is thermally cracked in pyrolysis furnaces through the use of steam. In addition to polymer grade Ethylene, the process also generates a methane-rich gas (used as fuel in the cracking furnaces) and hydrogen-rich gas, sold as by-product. This report was developed based essentially on the following reference(s): "Ethylene", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Hydrocarbon Pyrolysis, Cracking Furnace, Lummus, KBR, Technip, Linde, S&W

Download or read book Polyethylene Furanoate Production Cost Analysis PEF E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polyethylene Furanoate (PEF) production from monoethylene glycol (MEG) and 2,5-furandicarboxylic acid (FDCA). In this process, FDCA and MEG are polymerized to PEF in two polymerization steps in order to obtain Bottle-Grade PEF: melt-phase polymerization and solid-state polymerization. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): (1) WO Patent 2015137807, issued to Furanix Technologies in 2015; (2) US Patent 6749821 issued to UOP in 2004 Keywords: Polyethylene Furanoate, Polyethylene 2,5-Furandicarboxylate, PEF, Green PEF, FDCA, MEG

Download or read book Polyethylene Terephthalate Production Process Cost Analysis PET E11A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polyethylene Terephthalate (PET) production from ethylene glycol and purified terephthalic acid (PTA). The process examined is a typical melt-phase polymerization followed by solid-state polymerization. In this process, initially an oligomer intermediate is produced by the esterification of PTA with ethylene glycol. The oligomer then undergoes a melt-polymerization and a solid-state polymerization, leading to a bottle grade PET. This report was developed based essentially on the following reference(s): (1) "Polyesters, Thermoplastic", Kirk-Othmer Encyclopedia of Chemical Technology, 5th edition (2) "Polyesters", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Thermoplastic Polymer, Polyester, High Intrinsic Viscosity, Melt-Phase Polycondensation

Download or read book Propionic Acid Production from Ethylene Cost Analysis PA E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Propionic Acid production from ethylene and synthesis gas. In this process, propionaldehyde is formed by ethylene hydroformylation, and then converted to Propionic Acid via an oxidation reaction. This report was developed based essentially on the following reference(s): (1) "Oxo Synthesis," Ullmann's Encyclopedia of Industrial Chemistry, 7th edition (2) "Propionic Acid and Derivatives," Ullmann's Encyclopedia of Industrial Chemistry, 2014 (3) US Patent 8492584 issued to BASF in 2013 Keywords: Propanoic Acid, Ethene, Propanal, Oxo Reaction, Hydroformylation

Download or read book CO2 Sequestration and Valorization written by Claudia R. V. Morgado and published by BoD – Books on Demand. This book was released on 2014-03-12 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reconciliation of economic development, social justice and reduction of greenhouse gas emissions is one of the biggest political challenges of the moment. Strategies for mitigating CO2 emissions on a large scale using sequestration, storage and carbon technologies are priorities on the agendas of research centres and governments. Research on carbon sequestration is the path to solving major sustainability problems of this century a complex issue that requires a scientific approach and multidisciplinary and interdisciplinary technology, plus a collaborative policy among nations. Thus, this challenge makes this book an important source of information for researchers, policymakers and anyone with an inquiring mind on this subject.

Download or read book Frontiers of Graphene and Carbon Nanotubes written by Kazuhiko Matsumoto and published by Springer. This book was released on 2015-03-05 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on carbon nanotubes and graphene as representatives of nano-carbon materials, and describes the growth of new technology and applications of new devices. As new devices and as new materials, nano-carbon materials are expected to be world pioneers that could not have been realized with conventional semiconductor materials, and as those that extend the limits of conventional semiconductor performance. This book introduces the latest achievements of nano-carbon devices, processes, and technology growth. It is anticipated that these studies will also be pioneers in the development of future research of nano-carbon devices and materials. This book consists of 18 chapters. Chapters 1 to 8 describe new device applications and new growth methods of graphene, and Chapters 9 to 18, those of carbon nanotubes. It is expected that by increasing the advantages and overcoming the weak points of nanocarbon materials, a new world that cannot be achieved with conventional materials will be greatly expanded. We strongly hope this book contributes to its development.

Download or read book Springer Handbook of Medical Technology written by Rüdiger Kramme and published by Springer Science & Business Media. This book was released on 2011-10-02 with total page 1497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise, user-oriented and up-to-date desk reference offers a broad introduction to the fascinating world of medical technology, fully considering today’s progress and further development in all relevant fields. The Springer Handbook of Medical Technology is a systemized and well-structured guideline which distinguishes itself through simplification and condensation of complex facts. This book is an indispensable resource for professionals working directly or indirectly with medical systems and appliances every day. It is also meant for graduate and post graduate students in hospital management, medical engineering, and medical physics.

Download or read book Biorefineries written by Kurt Wagemann and published by Springer. This book was released on 2018-12-06 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive review on biomass resources, examples of biorefineries and corresponding products. The first part of this book covers topics such as different biorefinery resources from agriculture, wood processing residues and transport logistics of plant biomass. In the second part, expert contributors present biorefinery concepts of different biomass feedstocks, including vegetable-oils, sugarcane, starch, lignocellulose and microalgae. Readers will find here a summary of the syngas utilization and the bio-oil characterization and potential use as an alternative renewable fuel and source for chemical feedstocks. Particular attention is also given to the anaerobic digestion-based and Organosolv biorefineries. The last part of the book examines relevant products and components such as alcohols, hydrocarbons, bioplastics and lignin, and offers a sustainability evaluation of biorefineries.

Download or read book Microbial Strategies for Crop Improvement written by Mohammad Saghir Khan and published by Springer Science & Business Media. This book was released on 2009-08-25 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: With an ever-increasing human population, the demand placed upon the agriculture sector to supply more food is one of the greatest challenges for the agrarian community. In order to meet this challenge, environmentally unfriendly agroch- icals have played a key role in the green revolution and are even today commonly recommended to circumvent nutrient de?ciencies of the soils. The use of ag- chemicals is, though, a major factor for improvement of plant production; it causes a profound deteriorating effect on soil health (soil fertility) and in turn negatively affects the productivity and sustainability of crops. Concern over disturbance to the microbial diversity and consequently soil fertility (as these microbes are involved in biogeochemical processes), as well as economic constraints, have prompted fun- mental and applied research to look for new agro-biotechnologies that can ensure competitive yields by providing suf?ciently not only essential nutrients to the plants but also help to protect the health of soils by mitigating the toxic effects of certain pollutants. In this regard, the role of naturally abundant yet functionally fully unexplored microorganisms such as biofertilizers assume a special signi?cance in the context of supplementing plant nutrients, cost and environmental impact under both conventional practices and derelict environments. Therefore, current devel- ments in sustainability involve a rational exploitation of soil microbial communities and the use of inexpensive, though less bio-available, sources of plant nutrients, which may be made available to plants by microbially-mediated processes.

Download or read book Polymeric Gene Delivery Systems written by Yiyun Cheng and published by Springer. This book was released on 2018-09-04 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: ​The series Topics in Current Chemistry Collections presents critical reviews from the journal Topics in Current Chemistry organized in topical volumes. The scope of coverage is all areas of chemical science including the interfaces with related disciplines such as biology, medicine and materials science. The goal of each thematic volume is to give the non-specialist reader, whether in academia or industry, a comprehensive insight into an area where new research is emerging which is of interest to a larger scientific audience. Each review within the volume critically surveys one aspect of that topic and places it within the context of the volume as a whole. The most significant developments of the last 5 to 10 years are presented using selected examples to illustrate the principles discussed. The coverage is not intended to be an exhaustive summary of the field or include large quantities of data, but should rather be conceptual, concentrating on the methodological thinking that will allow the non-specialist reader to understand the information presented. Contributions also offer an outlook on potential future developments in the field. The chapter "Polymeric Nanoparticle-Mediated Gene Delivery for Lung Cancer Treatment" is available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.