Download or read book Estimation of Heterotrophic Active Biomass in Activated Sludge Systems Using Respirometry written by Hyungmo Moon and published by . This book was released on 2005 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Measurement of Heterotropic Active Biomass in Activated Sludge Systems written by B. J. Lee and published by . This book was released on 2005 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Respirometry in Control of the Activated Sludge Process written by Henri Spanjers and published by IWA Publishing. This book was released on 1998-01-01 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ebook only (available soon) The report describes the principles of measurement of respiration rate, the transformation of measurement data into other types of information, and the application of the obtained information in process control strategies. Some fundamental concepts on biological respiration and process control are provided to assist the reader with understanding the principles. A structured overview comprises some eighty control strategies in which respirometry plays a role. To enable the reader to consult the information sources, an extensive literature list of over 500 references in included and classified into six themes. Contents Fundamentals of Respiration Measuring Principles Measured and Deduced Variables Elementary Control Concepts Respirometry in Control of the Activated Sludge Process Summary and Perspectives. Scientific and Technical Report No.7 Also Available Respirometry in Control of the Activated Sludge Process: Benchmarking Control Strategies
Download or read book Determination of the Heterotrophic and Autotrophic Active Biomass During Activated Sludge Respirometric Batch Assays Using Molecular Techniques written by Arshad Ismail and published by . This book was released on 2008 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Operation of Activated Sludge Processes Using Respirometry written by Alan Rozich and published by CRC Press. This book was released on 1992-02-03 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough overview of respirometry and its scientific and engineering basis. The book describes the fundamentals of biological waste treatment, development of predictive models for system design and operation, and how respirometry fits in with these operations. It also presents case studies, which give you concrete examples of the application of respirometry. This book will help activated sludge process control designers, operators, and managers of biological wastewater treatment facilitieslearn how to improve methods for the analysis of biological wastewater systems, enhance design and treatability projects, optimize and troubleshoot plant operations, and accurately predict the impact of new loads or streams on biological wastewater facilities.
Download or read book Environmental Modeling written by Vijay P. Singh and published by Water Resources Publication. This book was released on 1999 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Batch Test for Measurement of Ordinary Heterotrophic Organism Active Biomass in Activated Sludge Mixed Liquor written by Byung Joon Lee and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental Methods in Wastewater Treatment written by Mark C. M. van Loosdrecht and published by IWA Publishing. This book was released on 2016-05-15 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past twenty years, the knowledge and understanding of wastewater treatment has advanced extensively and moved away from empirically based approaches to a fundamentally-based first principles approach embracing chemistry, microbiology, and physical and bioprocess engineering, often involving experimental laboratory work and techniques. Many of these experimental methods and techniques have matured to the degree that they have been accepted as reliable tools in wastewater treatment research and practice. For sector professionals, especially a new generation of young scientists and engineers entering the wastewater treatment profession, the quantity, complexity and diversity of these new developments can be overwhelming, particularly in developing countries where access to advanced level laboratory courses in wastewater treatment is not readily available. In addition, information on innovative experimental methods is scattered across scientific literature and only partially available in the form of textbooks or guidelines. This book seeks to address these deficiencies. It assembles and integrates the innovative experimental methods developed by research groups and practitioners around the world. Experimental Methods in Wastewater Treatment forms part of the internet-based curriculum in wastewater treatment at UNESCO-IHE and, as such, may also be used together with video records of experimental methods performed and narrated by the authors including guidelines on what to do and what not to do. The book is written for undergraduate and postgraduate students, researchers, laboratory staff, plant operators, consultants, and other sector professionals.
Download or read book Methods for Wastewater Characterization in Activated Sludge Modelling written by Henryk Melcer and published by IWA Publishing. This book was released on 2004-11-01 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical modeling is a useful tool for the design, analysis and control of wastewater treatment systems. The activated sludge process is one of the most common processes used in wastewater treatment, and therefore is a particularly important candidate for the application of mathematical models. In the 1980s, a task group organized by the International Association on Water Quality (IAWQ) developed a conceptual model of the activated sludge process, which has become an industry-wide standard for the development of computer-based activated sludge models. A recent version of the IAWQ model incorporates 19 components, 17 processes, and numerous rate and stoichiometric coefficients. It is difficult and costly to quantify all of the necessary coefficients for any given application of the model; consequently, it is important to identify the most critical wastewater and biomass components and the relevant coefficients to be quantified for the most common uses of the model. It is also important to provide guidance to potential model users on the use of default and/or estimated values for the remaining parameters.
Download or read book Determination of Heterotrophic Active Bacteria in Activated Sludge Using Novel Molecular Techniques written by F. Holder-Snyman and published by . This book was released on 2005 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wastewater Quality Monitoring and Treatment written by Philippe Quevauviller and published by John Wiley & Sons. This book was released on 2007-01-11 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: The issue of water quality monitoring is becoming a huge area as the EU requirements for cleaner water increase. On-line monitoring involves measuring a body of water constantly and in-situ as opposed to analysing samples in the lab. Currently filling the gap in the market, Wastewater Quality Monitoring: On-line Methods provides information on how to produce the best analyses of wastewater in order to meet the above mentioned requirements. This reference will prove invaluable to all local water companies, industrial companies producing wastewater, as well as environment agencies and researchers.
Download or read book Mathematical Modelling and Computer Simulation of Activated Sludge Systems written by Jacek Makinia and published by IWA Publishing. This book was released on 2020-03-02 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Modelling and Computer Simulation of Activated Sludge Systems – Second Edition provides, from the process engineering perspective, a comprehensive and up-to-date overview regarding various aspects of the mechanistic (“white box”) modelling and simulation of advanced activated sludge systems performing biological nutrient removal. In the new edition of the book, a special focus is given to nitrogen removal and the latest developments in modelling the innovative nitrogen removal processes. Furthermore, a new section on micropollutant removal has been added. The focus of modelling has been shifting in the last years to models that can describe the performance of a whole plant (plant-wide modelling). The expanded part of this new edition introduces models describing the most important processes interrelated with the mainstream activated sludge systems as well as models describing the energy balance, operating costs and environmental impact. The complex process evaluation, including minimization of energy consumption and carbon footprint, is in line with the present and future wastewater treatment goals. By combining a general introduction and a textbook, this book serves both intermediate and more experienced model users, both researchers and practitioners, as a comprehensive guide to modelling and simulation studies. The book can be used as a supplemental material at graduate and post-graduate levels of wastewater engineering/modelling courses.
Download or read book Industrial Wastewater Treatment by Activated Sludge written by Derin Orhon and published by IWA Publishing. This book was released on 2009-02-02 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial pollution is still a major concern and despite its significance, sound and systematic pollution control efforts are very poorly documented. The character and treatability of industrial wastewaters is highly variable and specific for each industrial activity. Biological treatment with activated sludge is the appropriate technology for industrial wastewaters from several major industrial sectors. Industrial Wastewater Treatment by Activated Sludge deals with the activated sludge treatment of industrial wastewaters by considering conceptual frameworks, methodologies and case studies, in a stepwise manner. The issues related to activated sludge treatment, such as biodegradability based characterization, modeling, assessment of stoichiometric and kinetic parameters and design, as well as the issues of industrial pollution control, e.g. in-plant control, effect of pretreatment, etc. are combined in a way to provide a comprehensive and information-rich view to the reader. By doing so, the book supplies an up-to-date reference for industrial wastewater experts and both graduate and undergraduate students. Industrial Wastewater Treatment by Activated Sludge provides a roadmap, describing the methodologies for the treatment of industrial wastewaters from several major sectors, based on a solid theoretical background. Up to now although valuable separate efforts both on activated sludge and industrial wastewater treatment have been presented, an integrated approach that is crucial to practice has not been available. This gap is filled by this book.
Download or read book Using Specific Activity Measurements to Estimate Waste Activated Sludge Biodegradability written by Alan L. Leavitt and published by . This book was released on 1984 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Active Biomass and Aeration Parameter Estimation for an Activated Sludge Plant Using State Observer Methods written by B O. Sodipo and published by . This book was released on 1986 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microorganisms in Activated Sludge and Biofilm Processes III written by Valter Tandoi and published by IWA Publishing (International Water Assoc). This book was released on 2002 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: The microbial complexity and the functions of the biomass present in activated sludge and biofilm systems were the subject matter of the 3rd Conference on Microorganisms in Activated Sludge and Biofilm Processes. Detailed knowledge of the identity, physiology and ecology of the microorganisms involved is central to any attempts to modify the composition of the biomass and hence optimise its performance. The Conference covered a wide range of topics dealing with the microbiology and microbial processes in activated sludge and biofilms, including sessions on newly identified microorganisms, microbial selection mechanisms and biomass storage processes. Many of these papers reported on the use of new molecular biological tools that directly address the population structure, dynamics and function of microbial communities. Other sessions dealt with work solving problems and improving performance in full-scale treatment plants and industrial wastewater treatment processes. From the extensive programme, a full peer review has selected for these proceedings 88 of the very best papers on the following topics: microbial dynamics; filamentous bacteria; polyphosphate and glycogen accumulating microorganisms; biofilm composition and processes; nitrifiers and denitrifiers; storage processes in biomass; biomass characterization; microbiology and biochemistry; full-scale experiences; foaming; industrial wastes. Together they form an unrivalled summary of work by the world?s leading experts to research the microbiological basis of wastewater treatment and improve the design and operation of biological processes. These proceedings are an essential reference for engineers, chemists, microbiologists and plant operators researching or applying activated sludge or biofilm techniques.
Download or read book Guidelines for Using Activated Sludge Models written by Leiv Rieger and published by IWA Publishing. This book was released on 2012-09-14 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical modelling of activated sludge systems is used widely for plant design, optimisation, training, controller design and research. The quality of simulation studies varies depending on the project objectives, finances and expertise available. Consideration has to be given to the model accuracy and the amount of time required carrying out a simulation study to produce the desired accuracy. Inconsistent approaches and insufficient documentation make quality assessment and comparison of simulation results difficult or almost impossible. A general framework for the application of activated sludge models is needed in order to overcome these obstacles. The genesis of the Good Modelling Practice (GMP) Task Group lies in a workshop held at the 4th IWA World Water Congress in Marrakech, Morocco where members of research groups active in wastewater treatment modelling came together to develop plans to synthesize the best practices of modellers from all over the world. The most cited protocols were included in the work, amongst others from: HSG (Hochschulgruppe), STOWA, BIOMATH and WERF. The goal of the group is to set up an internationally accepted framework to deal with the ASM type models in practice. This framework shall make modelling more straightforward and systematic to use especially for practitioners and consultants. Additionally, it shall help to define quality levels for simulation results, a procedure to assess this quality and to assist in the proper use of the models. The framework will describe a methodology for goal-oriented application of activated sludge models demonstrated by means of a concise guideline about the procedure of a simulation study and some illustrative case studies. The case studies shall give examples for the required data quality and quantity and the effort for calibration/validation with respect to a defined goal. The final report will include an extended appendix with additional information and details of methodologies. Additional features in Guidelines for Using Activated Sludge Models include a chapter on modelling industrial wastewater, an overview on the history, current practice and future of activated sludge modelling and several explanatory case studies. It can be used as an introductory book to learn about Good Modelling Practice (GMP) in activated sludge modelling and will be of special interest for process engineers who have no prior knowledge of modelling or for lecturers who need a textbook for their students. The STR can also be used as a modelling reference book and includes an extended appendix with additional information and details of methodologies. Scientific and Technical Report No. 22
