Download or read book Equipment and Components in the Oil and Gas Industry Volume 2 written by Karan Sotoodeh and published by CRC Press. This book was released on 2024-05-03 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Equipment and Components in the Oil and Gas Industry Volume 2: Components provides an overview of the components used in the oil and gas industry, including instrumentation, pipe components, and safety components. Using practical industry examples and an accessible approach, the book is a key reference point for those seeking to learn more about the industry. Covering both larger and smaller components used throughout the oil and gas industry, the book details the theory behind pressure gauges, temperature gauges, flow gauges, and level gauges. It then goes on to discuss piping components, such as pipes, flanges, and gaskets and introduces piping special components. Valves are particularly crucial to the oil and gas industry, including on/off valves, control valves, safety valves, and special valves. The book also details actuators, sprinklers, fire and gas detectors, hoses, and hose reels, along with electrical components such as switches, cables, wires, and cable glands. Finally, the book ends with a discussion of heating, ventilation, and air conditioning (HVAC) components. This book will be of interest to mechanical and chemical engineers working in the oil and gas industry.
Download or read book Equipment and Components in the Oil and Gas Industry Volume 2 written by Karan Sotoodeh and published by . This book was released on 2024 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the components used in the oil and gas industry, including instrumentation, pipe components, and safety components. Using practical industry examples, and an accessible approach, the book is a key reference point for all those seeking to learn more about the industry.
Download or read book Equipment and Components in the Oil and Gas Industry Volume 1 written by Karan Sotoodeh and published by CRC Press. This book was released on 2024-05-03 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Equipment and Components in the Oil and Gas Industry Volume 1: Equipment provides an overview of the equipment used in the oil and gas industry, as well as various stages of the oil and gas industry, including geology, exploration, drilling, transportation, and refining. Using practical industry examples and an accessible approach, the book is a key reference point for those seeking to learn more about the industry. The equipment used in the oil and gas industry is wide ranging, from drilling equipment and wellhead equipment, such as casings, tubing, and wellhead Christmas trees, to equipment for the transportation of fluids and gases, such as pumps and compressors. The book presents a simplified method to choose the correct equipment for each task, as well as covering the selection of heat exchangers and storage tanks. Finally, this book covers turbines, motors, and other prime movers, alongside a flare system for disposing of unwanted or waste gases in oil and gas refineries and petrochemical plants. This book will be of interest to mechanical and chemical engineers working in the oil and gas industry.
Download or read book Equipment and Components in the Oil and Gas Industry written by Karan Sotoodeh and published by . This book was released on 2024 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Oil and Gas Production Handbook An Introduction to Oil and Gas Production written by Havard Devold and published by Lulu.com. This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Materials Failure Analysis with Case Studies from the Oil and Gas Industry written by Abdel Salam Hamdy Makhlouf and published by Butterworth-Heinemann. This book was released on 2015-09-01 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Materials Failure Analysis: With Case Studies from the Oil and Gas Industry provides an updated understanding on why materials fail in specific situations, a vital element in developing and engineering new alternatives. This handbook covers analysis of materials failure in the oil and gas industry, where a single failed pipe can result in devastating consequences for people, wildlife, the environment, and the economy of a region. The book combines introductory sections on failure analysis with numerous real world case studies of pipelines and other types of materials failure in the oil and gas industry, including joint failure, leakage in crude oil storage tanks, failure of glass fibre reinforced epoxy pipes, and failure of stainless steel components in offshore platforms, amongst others. Introduces readers to modern analytical techniques in materials failure analysis Combines foundational knowledge with current research on the latest developments and innovations in the field Includes numerous compelling case studies of materials failure in oil and gas pipelines and drilling platforms
Download or read book Petroleum Refining Design and Applications Handbook written by A. Kayode Coker and published by John Wiley & Sons. This book was released on 2021-03-09 with total page 1056 pages. Available in PDF, EPUB and Kindle. Book excerpt: A must-read for any practicing engineer or student in this area There is a renaissance that is occurring in chemical and process engineering, and it is crucial for today's scientists, engineers, technicians, and operators to stay current. This book offers the most up-to-date and comprehensive coverage of the most significant and recent changes to petroleum refining, presenting the state-of-the-art to the engineer, scientist, or student. Useful as a textbook, this is also an excellent, handy go-to reference for the veteran engineer, a volume no chemical or process engineering library should be without.
Download or read book Project Management for the Oil and Gas Industry written by Adedeji B. Badiru and published by CRC Press. This book was released on 2016-04-19 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: Project management for oil and gas projects comes with a unique set of challenges that include the management of science, technology, and engineering aspects. Underlining the specific issues involved in projects in this field, Project Management for the Oil and Gas Industry: A World System Approach presents step-by-step application of project manag
Download or read book Oil Gas Handbook written by Will Pettijohn P.E.C. and published by AuthorHouse. This book was released on 2012-02 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers you a brief, but very involved look into the operations in the drilling of an Oil & Gas well. From start to finish, you'll see a general prognosis of the drilling process. If you are new to the oil & gas industry, you'll enjoy having a leg up with the knowledge of these processes. If you are a seasoned oil & gas person, you'll enjoy reading what you may or may not know in these pages.
Download or read book Gas and Oil Reliability Engineering written by Eduardo Calixto and published by Gulf Professional Publishing. This book was released on 2016-06-22 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas and Oil Reliability Engineering: Modeling and Analysis, Second Edition, provides the latest tactics and processes that can be used in oil and gas markets to improve reliability knowledge and reduce costs to stay competitive, especially while oil prices are low. Updated with relevant analysis and case studies covering equipment for both onshore and offshore operations, this reference provides the engineer and manager with more information on lifetime data analysis (LDA), safety integrity levels (SILs), and asset management. New chapters on safety, more coverage on the latest software, and techniques such as ReBi (Reliability-Based Inspection), ReGBI (Reliability Growth-Based Inspection), RCM (Reliability Centered Maintenance), and LDA (Lifetime Data Analysis), and asset integrity management, make the book a critical resource that will arm engineers and managers with the basic reliability principles and standard concepts that are necessary to explain their use for reliability assurance for the oil and gas industry. Provides the latest tactics and processes that can be used in oil and gas markets to improve reliability knowledge and reduce costs Presents practical knowledge with over 20 new internationally-based case studies covering BOPs, offshore platforms, pipelines, valves, and subsea equipment from various locations, such as Australia, the Middle East, and Asia Contains expanded explanations of reliability skills with a new chapter on asset integrity management, relevant software, and techniques training, such as THERP, ASEP, RBI, FMEA, and RAMS
Download or read book Operational Aspects of Oil and Gas Well Testing written by S. McAleese and published by Elsevier. This book was released on 2000-03-10 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Well Testing is recognised by many operating oil and gas companies to be the most hazardous operation they routinely undertake. Therefore, it is of great importance that such operations are extremely well planned and executed.This handbook covers all the major "Operational Aspects of Oil and Gas Well Testing" and uses a structured approach to guide the reader through the steps required to safely and effectively plan a well test operation under just about any circumstances world wide.Safety procedures and well testing recommended practices are rigorously addressed in this book, as are the responsibilities of those persons involved in well testing operations. Perforating equipment, drill stem test equipment and bottom hole pressure gauges are discussed in detail in the book. There is also a very valuable section on sub sea equipment, an area often not well understood even by experienced engineers who may have been primarily involved with land or jackup rigs. A major part of the book is the detailed coverage of the equipment and instrumentation that makes up a surface well testing package. It also covers operational and testing related problems such as, hydrates, wax and sand, and offers the reader some possible solutions. There are useful chapters on sampling, onsite chemistry, coil tubing and nitrogen operations and basic stimulation as they relate to well testing. Finally there is an extensive section of appendices covering useful engineering calculations and there is a complete example of a detailed well testing programme.
Download or read book Corrosion Control in the Oil and Gas Industry written by Sankara Papavinasam and published by Elsevier. This book was released on 2013-10-15 with total page 1021 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effect of corrosion in the oil industry leads to the failure of parts. This failure results in shutting down the plant to clean the facility. The annual cost of corrosion to the oil and gas industry in the United States alone is estimated at $27 billion (According to NACE International)—leading some to estimate the global annual cost to the oil and gas industry as exceeding $60 billion. In addition, corrosion commonly causes serious environmental problems, such as spills and releases. An essential resource for all those who are involved in the corrosion management of oil and gas infrastructure, Corrosion Control in the Oil and Gas Industry provides engineers and designers with the tools and methods to design and implement comprehensive corrosion-management programs for oil and gas infrastructures. The book addresses all segments of the industry, including production, transmission, storage, refining and distribution. Selects cost-effective methods to control corrosion Quantitatively measures and estimates corrosion rates Treats oil and gas infrastructures as systems in order to avoid the impacts that changes to one segment if a corrosion management program may have on others Provides a gateway to more than 1,000 industry best practices and international standards
Download or read book Role of Giant Corporations written by United States. Congress. Senate. Select Committee on Small Business. Subcommittee on Monopoly and published by . This book was released on 1969 with total page 1644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considers economic concentration within the U.S. automobile industry and its impact on consumers, competition, and technological progress, and its response to Government regulations.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-03 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Production Operations Volume 2 written by Ken Arnold and published by Elsevier. This book was released on 1999-08-12 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised edition puts the most current information about gas-handling systems and facilities at your fingertips. The authors channeled their classroom and field experience into this volume, which features many new sections such as: * Heat recovery units * Kinetic inhibitors and anti-agglomerators * Trays and packing for distillation and absorption towers * Compressor valves * Foundation design considerations for reciprocating compressors * Pressure vessel issues and components * Nox reduction in engines and turbines * Safety management systems This book walks you through the equipment and processes used in gas-handling operations to help you design and manage a production facility. Production engineers will keep this volume on the desktop for the latest information on how to DESIGN, SPECIFY, and OPERATE gas-handling systems and facilities. The book allows engineers with little or background in production facility design to easily locate details about equipment, processes, and design parameters. With this volume, you will more completely comprehend the techniques of handling produced fluids from gas wells so your facility can be more efficient and productive. * Revised edition puts the most current information about gas-handling systems at your fingertips * Features brand new sections!
Download or read book Fundamentals of Oil Gas Industry for Beginners written by Samir Dalvi and published by Notion Press. This book was released on 2015-11-03 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: A prominent linchpin in world politics and in security policies world over, oil and gas have tremendous value in both, the political and economical sectors of global relations, business establishments and policy. Regardless of whether one is a novice to a given field, or a well accomplished veteran in the field, there is a need for the continued engagement with the basics that underlie the core subjects. With that in mind, the Fundamentals of Oil and Gas is a perfect primer for the first-timer in the field, while also a copious text to help a seasoned veteran stay abreast with the nuances of the world of Oil and Gas.
Download or read book Standard Handbook of Petroleum and Natural Gas Engineering Volume 2 written by William C. Lyons and published by Elsevier. This book was released on 1996-10-16 with total page 1087 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum engineering now has its own true classic handbook that reflects the profession's status as a mature major engineering discipline. Formerly titled the Practical Petroleum Engineer's Handbook, by Joseph Zaba and W.T. Doherty (editors), this new, completely updated two-volume set is expanded and revised to give petroleum engineers a comprehensive source of industry standards and engineering practices. It is packed with the key, practical information and data that petroleum engineers rely upon daily. The result of a fifteen-year effort, this handbook covers the gamut of oil and gas engineering topics to provide a reliable source of engineering and reference information for analyzing and solving problems. It also reflects the growing role of natural gas in industrial development by integrating natural gas topics throughout both volumes. More than a dozen leading industry experts-academia and industry-contributed to this two-volume set to provide the best , most comprehensive source of petroleum engineering information available.
