Download or read book Enhancement of RF Breakdown Threshold of Microwave Cavities by Magnetic Insulation written by and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Limitations on the maximum achievable accelerating gradient of microwave cavities can influence the performance, length, and cost of particle accelerators. Gradient limitations are believed to be initiated by electron emission from the cavity surfaces. Here, we show that field emission is effectively suppressed by applying a tangential magnetic field to the cavity walls, so higher gradients can be achieved. Numerical simulations indicate that the magnetic field prevents electrons leaving these surfaces and subsequently picking up energy from the electric field. Our results agree with current experimental data. Two specific examples illustrate the implementation of magnetic insulation into prospective particle accelerator applications. The ultimate goal of several research efforts is to integrate high-gradient radio-frequency (rf) structures into next generation particle accelerators. For instance, the Muon Accelerator Program is looking at developing low-frequency cavities for muon cooling, and the International Linear Collider is optimizing the performance of 1.3 GHz rf structures aimed at designing a 1 TeV electron-positron collider. Furthermore, the High Gradient RF Collaboration is examining high frequency (f> 10 GHz) structures intended for an electron-positron collider operating at energies in the TeV range. In all this research, the accelerating gradient will be one of the crucial parameters affecting their design, construction, and cost. Limitations from rf breakdown strongly influence the development of accelerators since it limits the machine's maximum gradient. The emission of electrons from the cavity surfaces seemingly is a necessary stage in the breakdown process, acting either as a direct cause of breakdown or as precursor for other secondary effects. Typically, electron currents arise from sharp edges or cracks on the cavities surfaces, where the strength of the electric field is strongly enhanced compared to that of the nominal field when the surfaces of the cavity are perfect planes. Subsequently, a stream of emitted electrons can be accelerated by the rf electric field toward the opposing cavity walls. Upon impact, they heat a localized region, resulting in the eventual breakdown by a variety of secondary mechanisms. Therefore, it is advantageous to develop techniques that could suppress field emission within rf cavities. It has been proposed that high voltages up to about a gigavolt range may be sustained in voltage transformers, by adopting the principle of magnetic insulation in ultrahigh vacuum. The basic idea is to suppress field emission by applying a suitably directed magnetic field of sufficient strength to force the electrons orbits back on to the rf emitting surface. More recently, it was shown that magnetic insulation could be very effective in suppressing field emission and multipacting in rectangular coupler waveguides. Hence, the question arises whether the same principle is applicable to rf accelerating structures. In this Letter, we shall consider application of the concept to low-frequency (201-805 MHz) muon accelerator cavities.
Download or read book High Brightness Accelerators written by Anthony D. Hyder and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: A NATO Advanced Study Institute (ASI) on High-Brightness Accelerators was held at the Atholl Palace Hotel, Pitlochry, Perthshire, Scotland, from July 13 through July 25, 1986. This publication is the Proceedings of the Institute. This ASI emphasized the basic physics and engineering of the rela tively new and fast-emerging field of high-brightness particle accelera tors. These machines are high- to very-high-current (amperes to hundreds of kiloamperes), modest-voltage (megavolt to tens of megavolts) devices, and as such are opposed to those historically used for high-energy physics studies (i.e., gigavolt and higher energies and rather low currents). The primary focus of the Institute was on the physics of the accelerator and the beam, including the dynamics, equilibria, and insta bilities of high-current beams near the space-charge limit; accelerator engineering techniques; and the applications of high-brightness beams in areas such as free-electron lasers, synchrotron-radiation sources, food processing, and heavy- and light-ion fusion. The Institute concentrated on bringing together several diverse but related communities which, we hope, benefited from this opportunity to interact: the North American activity in machine technology, engineer ing, and diagnostics with the strong European theoretical community; the basic beam physicists with the engineering technologists.
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1976-04 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microwave Circulator Design Second Edition written by Douglas K. Linkhart and published by Artech House. This book was released on 2014-02-01 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Circulator design has advanced significantly since the first edition of this book was published 25 years ago. The objective of this second edition is to present theory, information, and design procedures that will enable microwave engineers and technicians to design and build circulators successfully. This resource contains a discussion of the various units used in the circulator design computations, as well as covers the theory of operation. This book presents numerous applications, giving microwave engineers new ideas about how to solve problems using circulators. Design examples are provided, which demonstrate how to apply the information to real-world design tasks.
Download or read book RF Superconductivity for Accelerators written by Hasan Padamsee and published by John Wiley & Sons. This book was released on 2008-02-26 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces some of the key ideas of this exciting field, using a pedagogic approach, and presents a comprehensive overview of the field. It is divided into four parts. The first part introduces the basic concepts of microwave cavities for particle acceleration. The second part is devoted to the observed behavior of superconducting cavities. In the third part,general issues connected with beam-cavity interaction and the related issues for the critical components are covered. The final part discusses applications of superconducting cavities to frontier accelerators of the future, drawing heavily on the examples that are in their most advanced stage. Each part of the book ends in a Problems section to illustrate and amplify text material as well as draw on example applications of superconducting cavities to existing and future accelerators.
Download or read book Microwave Engineering written by David M. Pozar and published by Wiley Global Education. This book was released on 2012-04-13 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 4th edition of this classic text provides a thorough coverage of RF and microwave engineering concepts, starting from fundamental principles of electrical engineering, with applications to microwave circuits and devices of practical importance. Coverage includes microwave network analysis, impedance matching, directional couplers and hybrids, microwave filters, ferrite devices, noise, nonlinear effects, and the design of microwave oscillators, amplifiers, and mixers. Material on microwave and RF systems includes wireless communications, radar, radiometry, and radiation hazards. A large number of examples and end-of-chapter problems test the reader's understanding of the material. The 4th edition includes new and updated material on systems, noise, active devices and circuits, power waves, transients, RF CMOS circuits, and more.
Download or read book Microwave and RF Vacuum Electronic Power Sources written by Richard G. Carter and published by Cambridge University Press. This book was released on 2018-04-12 with total page 843 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get up-to-speed on the theory, principles and design of vacuum electron devices.
Download or read book Microwave Discharges written by Carlos M. Ferreira and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a NATO ARW held in Vimeiro, Portugal, May 11-15, 1992
Download or read book Microwave Circuit Design Using Linear and Nonlinear Techniques written by George D. Vendelin and published by John Wiley & Sons. This book was released on 2005-10-03 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ultimate handbook on microwave circuit design with CAD. Full of tips and insights from seasoned industry veterans, Microwave Circuit Design offers practical, proven advice on improving the design quality of microwave passive and active circuits-while cutting costs and time. Covering all levels of microwave circuit design from the elementary to the very advanced, the book systematically presents computer-aided methods for linear and nonlinear designs used in the design and manufacture of microwave amplifiers, oscillators, and mixers. Using the newest CAD tools, the book shows how to design transistor and diode circuits, and also details CAD's usefulness in microwave integrated circuit (MIC) and monolithic microwave integrated circuit (MMIC) technology. Applications of nonlinear SPICE programs, now available for microwave CAD, are described. State-of-the-art coverage includes microwave transistors (HEMTs, MODFETs, MESFETs, HBTs, and more), high-power amplifier design, oscillator design including feedback topologies, phase noise and examples, and more. The techniques presented are illustrated with several MMIC designs, including a wideband amplifier, a low-noise amplifier, and an MMIC mixer. This unique, one-stop handbook also features a major case study of an actual anticollision radar transceiver, which is compared in detail against CAD predictions; examples of actual circuit designs with photographs of completed circuits; and tables of design formulae.
Download or read book NBS Special Publication written by and published by . This book was released on 1968 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Voltage Vacuum Insulation written by and published by Elsevier. This book was released on 1995-04-05 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past decade has witnessed dramatic growth in the diversity and complexity of device applications where vacuum is required to support either high voltages or high electric fields. This is particularly true in thespace industry, specifically for the development of space-based pulse power systems. This book presents an overview of the technological advances that have occurred since the publication of the Editors earlier book High Voltage Vacuum Insulation: The Physical Basis. In this latest book, contributions from internationally recognized professionals and researchers in the field provide expanded treatment of the practical aspects of the subject. High Voltage Vacuum Insulation: Basic Concepts and Technological Practice provides a modern working manual for this specialized technology that is generic to a wide range of applications. The format makes the text suitable for use as a basis for special topic lecture courses at either the undergraduate or graduate level. Provides the fundamental physical concepts of the subject Focuses on practical applications Gives a historical survey of the field Includes a detailed account of system design criteria Reviews theoretical models developed to explain the pinhole phenomena Presents results of a series of experimental investigations on the subject
Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1997 with total page 1860 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lumped Elements for RF and Microwave Circuits written by I. J. Bahl and published by Artech House. This book was released on 2003 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical book is the first comprehensive treatment of lumped elements, which are playing a critical role in the development of the circuits that make these cost-effective systems possible. The book offers professionals an in-depth understanding of the different types of RF and microwave circuit elements.
Download or read book RF and Microwave Radiation Safety written by Ronald Kitchen and published by Newnes. This book was released on 2001-10-02 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: The leading professional guide to RF and microwave safety issues. A practical handbook for all involved in electronic design and safety assessment, RF and Microwave Radiation Safety covers the problems of RF safety management, including the use of measuring instruments and methods, radiation hazards and risks resulting from electromagnetic interference, as well as reviewing current safety standards and the implications for RF design. The second edition takes into account a wide range of technical and legislative changes, and has been revised in line with the latest EU and international standards. Issues raised by increasing levels of microwave pollution from mobile phones and other sources are also confronted. New material covers: International Radiological Protection Commission (IRPC): new recommendations published in 1998 European Broadcasting Union (EBU)'s new guide EU Physical Agents Directive and Machines Directive (both of which cover radio transmitters) UK National Radiological Protection Board (UKNRPB) new guidance on safety levels Covers radiation hazards and risks resulting from electromagnetic interference Leading professional guide to RF and microwave safety issues Revised in line with the latest the EU and international standards
Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1981 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microwave Devices Circuits and Subsystems for Communications Engineering written by Ian A. Glover and published by John Wiley & Sons. This book was released on 2006-05-01 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwave Devices, Circuits and Subsystems for Communications Engineering provides a detailed treatment of the common microwave elements found in modern microwave communications systems. The treatment is thorough without being unnecessarily mathematical. The emphasis is on acquiring a conceptual understanding of the techniques and technologies discussed and the practical design criteria required to apply these in real engineering situations. Key topics addressed include: Microwave diode and transistor equivalent circuits Microwave transmission line technologies and microstrip design Network methods and s-parameter measurements Smith chart and related design techniques Broadband and low-noise amplifier design Mixer theory and design Microwave filter design Oscillators, synthesisers and phase locked loops Each chapter is written by specialists in their field and the whole is edited by experience authors whose expertise spans the fields of communications systems engineering and microwave circuit design. Microwave Devices, Circuits and Subsystems for Communications Engineering is suitable for senior electrical, electronic or telecommunications engineering undergraduate students, first year postgraduate students and experienced engineers seeking a conversion or refresher text. Includes a companion website featuring: Solutions to selected problems Electronic versions of the figures Sample chapter
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 1460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
