Download or read book Energy Efficiency of Manufacturing Processes and Systems written by Konstantinos Salonitis and published by MDPI. This book was released on 2020-11-09 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue addresses the important issue of the energy efficiency of both manufacturing processes and systems. Manufacturing is responsible for one-third of global energy consumption and CO2 emissions. Thus, improving the energy efficiency of production has been the focus of research in recent years. Energy efficiency has begun to be considered as one of the key decision-making attributes for manufacturing. This book includes recent studies on methods for the measurement of energy efficiency, tools and techniques for the analysis and development of improvements with regards to energy consumption, modeling and simulation of energy efficiency, and the integration of green and lean manufacturing. This book presents a breadth of relevant information, material, and knowledge to support research, policy-making, practices, and experience transferability to address the issues of energy efficiency.

Download or read book Energy Efficiency in Manufacturing Systems written by Sebastian Thiede and published by Springer Science & Business Media. This book was released on 2012-04-23 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy consumption is of great interest to manufacturing companies. Beyond considering individual processes and machines, the perspective on process chains and factories as a whole holds major potentials for energy efficiency improvements. To exploit these potentials, dynamic interactions of different processes as well as auxiliary equipment (e.g. compressed air generation) need to be taken into account. In addition, planning and controlling manufacturing systems require balancing technical, economic and environmental objectives. Therefore, an innovative and comprehensive methodology – with a generic energy flow-oriented manufacturing simulation environment as a core element – is developed and embedded into a step-by-step application cycle. The concept is applied in its entirety to a wide range of case studies such as aluminium die casting, weaving mills, and printed circuit board assembly in order to demonstrate the broad applicability and the benefits that can be achieved.

Download or read book Efficiency of Manufacturing Processes written by Wen Li and published by Springer. This book was released on 2015-06-13 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents a reliable methodology for characterising the energy and eco-efficiency of unit manufacturing processes. The Specific Energy Consumption, SEC, will be identified as the key indicator for the energy efficiency of unit processes. An empirical approach will be validated on different machine tools and manufacturing processes to depict the relationship between process parameters and energy consumptions. Statistical results and additional validation runs will corroborate the high level of accuracy in predicting the energy consumption. In relation to the eco-efficiency, the value and the associated environmental impacts of manufacturing processes will also be discussed. The interrelationship between process parameters, process value and the associated environmental impact will be integrated in the evaluation of eco-efficiency. The book concludes with a further investigation of the results in order to develop strategies for further efficiency improvement. The target audience primarily comprises researchers and experts in the field, but the book may also be beneficial for graduate students.

Download or read book Energy Efficient Manufacturing written by John W. Sutherland and published by John Wiley & Sons. This book was released on 2018-07-24 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last several years, manufacturers have expressed increasing interest in reducing their energy consumption and have begun to search for opportunities to reduce their energy usage. In this book, the authors explore a variety of opportunities to reduce the energy footprint of manufacturing. These opportunities cover the entire spatial scale of the manufacturing enterprise: from unit process-oriented approaches to enterprise-level strategies. Each chapter examines some aspect of this spatial scale, and discusses and describes the opportunities that exist at that level. Case studies demonstrate how the opportunity may be acted on with practical guidance on how to respond to these opportunities.

Download or read book Energy Efficiency of Manufacturing Processes and Systems written by Konstantinos Salonitis and published by . This book was released on 2020 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue addresses the important issue of the energy efficiency of both manufacturing processes and systems. Manufacturing is responsible for one-third of global energy consumption and CO2 emissions. Thus, improving the energy efficiency of production has been the focus of research in recent years. Energy efficiency has begun to be considered as one of the key decision-making attributes for manufacturing. This book includes recent studies on methods for the measurement of energy efficiency, tools and techniques for the analysis and development of improvements with regards to energy consumption, modeling and simulation of energy efficiency, and the integration of green and lean manufacturing. This book presents a breadth of relevant information, material, and knowledge to support research, policy-making, practices, and experience transferability to address the issues of energy efficiency.

Download or read book Quantitative Analysis and Optimal Control of Energy Efficiency in Discrete Manufacturing System written by Yan Wang and published by Springer Nature. This book was released on 2020-06-01 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides energy efficiency quantitative analysis and optimal methods for discrete manufacturing systems from the perspective of global optimization. In order to analyze and optimize energy efficiency for discrete manufacturing systems, it uses real-time access to energy consumption information and models of the energy consumption, and constructs an energy efficiency quantitative index system. Based on the rough set and analytic hierarchy process, it also proposes a principal component quantitative analysis and a combined energy efficiency quantitative analysis. In turn, the book addresses the design and development of quantitative analysis systems. To save energy consumption on the basis of energy efficiency analysis, it presents several optimal control strategies, including one for single-machine equipment, an integrated approach based on RWA-MOPSO, and one for production energy efficiency based on a teaching and learning optimal algorithm. Given its scope, the book offers a valuable guide for students, teachers, engineers and researchers in the field of discrete manufacturing systems.

Download or read book Manufacturing Systems Theory and Practice written by George Chryssolouris and published by Springer Science & Business Media. This book was released on 2006-02-28 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: Overviews manufacturing systems from the ground up, following the same concept as in the first edition. Delves into the fundamental building blocks of manufacturing systems: manufacturing processes and equipment. Discusses all topics from the viewpoint of four fundamental manufacturing attributes: cost, rate, flexibility and quality.

Download or read book Energy Efficient Manufacturing written by John W. Sutherland and published by John Wiley & Sons. This book was released on 2018-07-04 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last several years, manufacturers have expressed increasing interest in reducing their energy consumption and have begun to search for opportunities to reduce their energy usage. In this book, the authors explore a variety of opportunities to reduce the energy footprint of manufacturing. These opportunities cover the entire spatial scale of the manufacturing enterprise: from unit process-oriented approaches to enterprise-level strategies. Each chapter examines some aspect of this spatial scale, and discusses and describes the opportunities that exist at that level. Case studies demonstrate how the opportunity may be acted on with practical guidance on how to respond to these opportunities.

Download or read book Sustainable Machining written by J. Paulo Davim and published by Springer. This book was released on 2017-03-19 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview on current sustainable machining. Its chapters cover the concept in economic, social and environmental dimensions. It provides the reader with proper ways to handle several pollutants produced during the machining process. The book is useful on both undergraduate and postgraduate levels and it is of interest to all those working with manufacturing and machining technology.

Download or read book Nature Inspired Optimization in Advanced Manufacturing Processes and Systems written by Ganesh M. Kakandikar and published by CRC Press. This book was released on 2020-12-08 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacturing system is going through substantial changes and developments in light of Industry 4.0. Newer manufacturing technologies are being developed and applied. There is a need to optimize these techniques when applied in different circumstances with respect to materials, tools, product configurations, and process parameters. This book covers computational intelligence applied to manufacturing. It discusses nature-inspired optimization of processes and their design and development in manufacturing systems. It explores all manufacturing processes, at both macro and micro levels, and offers manufacturing philosophies. Nonconventional manufacturing, real industry problems and case studies, research on generative processes, and relevance of all this to Industry 4.0 is also included. Researchers, students, academicians, and industry professionals will find this reference title very useful.

Download or read book Efficiency of Manufacturing Processes written by Wen Li and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents a reliable methodology for characterising the energy and eco-efficiency of unit manufacturing processes. The Specific Energy Consumption, SEC, will be identified as the key indicator for the energy efficiency of unit processes. An empirical approach will be validated on different machine tools and manufacturing processes to depict the relationship between process parameters and energy consumptions. Statistical results and additional validation runs will corroborate the high level of accuracy in predicting the energy consumption. In relation to the eco-efficiency, the value and the associated environmental impacts of manufacturing processes will also be discussed. The interrelationship between process parameters, process value and the associated environmental impact will be integrated in the evaluation of eco-efficiency. The book concludes with a further investigation of the results in order to develop strategies for further efficiency improvement. The target audience primarily comprises researchers and experts in the field, but the book may also be beneficial for graduate students.

Download or read book Cyber Physical Systems and Industry 4 0 written by Dinesh Goyal and published by CRC Press. This book was released on 2022-02-16 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new work explores the growth of information and communication technologies with an emphasis on cyber-physical systems and security management of these systems. This volume discusses and analyzes the various effective practical applications of CPS, which involves the integration of the physical process with embedded computation and network monitoring along with feedback loops from physical systems. The authors identify the best set of applications and discuss the drawbacks of existing systems. The book provides a broad outlook on the applications of cyber-physical systems along with case studies and examples in healthcare, automotive electronics, industrial automation, environment monitoring, agriculture, and applications in civil and mechanical sectors. Topics include using an energy management system in smart grids, implementing an intelligent traffic management system, warehouse tracking and monitoring, medical cyber-physical systems security, remote healthcare monitoring, and more.

Download or read book Virtual and Augmented Reality Applications in Manufacturing written by S.K. Ong and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by experts from the world’s leading institutions in the field, this is the only book to cover virtual and augmented reality in manufacturing from a manufacturing perspective, rather than a computer science angle. It details applications of state-of-the-art technologies in real industrial situations.

Download or read book Modern Manufacturing Processes written by Muammer Koç and published by John Wiley & Sons. This book was released on 2019-09-04 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an in-depth understanding of the fundamentals of a wide range of state-of-the-art materials manufacturing processes Modern manufacturing is at the core of industrial production from base materials to semi-finished goods and final products. Over the last decade, a variety of innovative methods have been developed that allow for manufacturing processes that are more versatile, less energy-consuming, and more environmentally friendly. This book provides readers with everything they need to know about the many manufacturing processes of today. Presented in three parts, Modern Manufacturing Processes starts by covering advanced manufacturing forming processes such as sheet forming, powder forming, and injection molding. The second part deals with thermal and energy-assisted manufacturing processes, including warm and hot hydrostamping. It also covers high speed forming (electromagnetic, electrohydraulic, and explosive forming). The third part reviews advanced material removal process like advanced grinding, electro-discharge machining, micro milling, and laser machining. It also looks at high speed and hard machining and examines advances in material modeling for manufacturing analysis and simulation. Offers a comprehensive overview of advanced materials manufacturing processes Provides practice-oriented information to help readers find the right manufacturing methods for the intended applications Highly relevant for material scientists and engineers in industry Modern Manufacturing Processes is an ideal book for practitioners and researchers in materials and mechanical engineering.

Download or read book Sustainable Manufacturing Processes written by R. Ganesh Narayanan and published by Academic Press. This book was released on 2022-10-08 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Manufacturing Processes provides best practice advice on sustainable manufacturing methods, with examples from industry as well as important supporting theory. In the current manufacturing industry, processes and materials are developed with close reference to sustainability issues, with an outward look to optimum production efficiency and reduced environmental impact. Important topics such as the use of renewable energy, reduction of material waste and recycling, reduction in energy and water consumption, and reduction in emissions are all discussed, along with broad coverage of deformation and joining technologies, computational techniques, and computer-aided engineering. In addition, a wide range of traditional and innovative manufacturing technologies are covered, including friction stir welding, incremental forming, abrasive water jet machining, laser beam machining, sustainable foundry, porous material fabrication by powder metallurgy, laser and additive manufacturing, and thermoelectric and thermomagnetic energy harvesting. Features practical case studies from industry experts Explains methods for reducing waste in additive manufacturing Provides a detailed examination on how sustainability is measured in manufacturing

Download or read book Meeting the energy challenge written by Great Britain: Department of Trade and Industry and published by The Stationery Office. This book was released on 2007-05-23 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are two main energy challenges: tackling climate change by reducing carbon dioxide emissions; and ensuring clean and affordable energy as the country becomes increasingly dependent on imported fuel. These challenges have to be met against the backdrop of rising fossil fuel prices; slower than anticipated liberalisation of the EU energy markets; heightened awareness of the risk arising from remaining oil and gas reserves being concentrated in a few geographical regions; and a need for substantial new investment in power stations, the electricity grid and gas infrastructure. This White Paper sets out the Governments international and domestic strategy to address these challenges and ways to implement the Energy Review of 2006 and the 2006 Pre-Budget Report. There is a separate consultation document on nuclear power.

Download or read book Manufacturing Process Controls for the Industries of the Future written by National Research Council and published by National Academies Press. This book was released on 1998-08-14 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing process controls include all systems and software that exert control over production processes. Control systems include process sensors, data processing equipment, actuators, networks to connect equipment, and algorithms to relate process variables to product attributes. Since 1995, the U.S. Department of Energy Office of Industrial Technology 's (OIT) program management strategy has reflected its commitment to increasing and documenting the commercial impact of OIT programs. OIT's management strategy for research and development has been in transition from a "technology push" strategy to a "market pull" strategy based on the needs of seven energy-and waste-intensive industries-steel, forest products, glass, metal casting, aluminum, chemicals, and petroleum refining. These industries, designated as Industries of the Future (IOF), are the focus of OIT programs. In 1997, agriculture, specifically renewable bioproducts, was added to the IOF group. The National Research Council Panel on Manufacturing Process Controls is part of the Committee on Industrial Technology Assessments (CITA), which was established to evaluate the OIT program strategy, to provide guidance during the transition to the new IOF strategy, and to assess the effects of the change in program strategy on cross-cutting technology programs, that is, technologies applicable to several of the IOF industries. The panel was established to identify key processes and needs for improved manufacturing control technology, especially the needs common to several IOF industries; identify specific research opportunities for addressing these common industry needs; suggest criteria for identifying and prioritizing research and development (R&D) to improve manufacturing controls technologies; and recommend means for implementing advances in control technologies.