Download or read book Fatigue and Fracture Mechanices written by Steven R. Daniewicz and published by ASTM International. This book was released on 2005-09 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of Plated Structures written by Darko Beg and published by John Wiley & Sons. This book was released on 2012-01-09 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main aim of this book is to provide practical advice to designers of plated structures for correct and efficient application of EN 1993-1-5 design rules. In chapter 1 the purpose, the scope and the structure of the book is explained. In chapter 2 a rather detailed and commented overview of EN 1993-1-5 design rules is given following the structure of the standard. Shear lag effect as well as plate buckling problems due to direct stresses, shear forces, transverse forces and interactions of these effects are covered. This chapter also includes a reduced stress method and a finite element analysis approach to plate buckling problems. A large number of design examples illustrate the proper application of individual design rules. Chapter 3 and 4 bring two complete design examples on a crane runway and a box-girder bridge.

Download or read book Design of Steel Structures written by Frantisek Wald and published by Research Publishing Service. This book was released on 2012 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to introduce European Standards - Eurocodes for structural steel design. The basic principles for design of steel structures according to EN 1993-1-1 General rules and rules for buildings and EN 1993-1-8 Design of joints are summarized. The design procedures and application of freely available tools are demonstrated through worked examples in the book.

Download or read book Design of Structural Elements written by William McKenzie and published by Bloomsbury Publishing. This book was released on 2013-04-19 with total page 1057 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic and well-respected textbook provides the most comprehensive coverage of the process of design for structural elements and features a wealth of practical problems and real-world examples. It introduces readers to the design requirements of the Eurocodes for the four most commonly used materials in construction: concrete, steel, timber and masonry, and illustrates the concepts and calculations necessary for the design of the most frequently encountered basic structural elements. It includes a detailed section on structural analysis. The scope of this text is wide, and its numerous examples, problems and easy-to-follow diagrams make it an ideal course text. This user-friendly text is an indispensable resource both for undergraduates in all years of civil engineering and structural engineering, in construction and architecture, and for practising engineers looking to refresh their knowledge.

Download or read book Steel Building Design written by M. E. Brettle and published by . This book was released on 2008 with total page 65 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of Steel Structures for Buildings in Seismic Areas written by ECCS - European Convention for Constructional Steelwork and published by John Wiley & Sons. This book was released on 2018-01-03 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume elucidates the design criteria and principles for steel structures under seismic loads according to Eurocode 8-1. Worked Examples illustrate the application of the design rules. Two case studies serve as best-practice samples.

Download or read book Steel Design 1 Structural Basics written by H. H. Snijder and published by John Wiley & Sons. This book was released on 2020-07-21 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers the design and analysis of steel structures for buildings according to EN 1990 (Eurocode 0), EN 1991 (Eurocode 1) and EN 1993 (Eurocode 3). Chapter 1 describes the theory and background of EN 1990 in terms of structural safety, reliability and the design values of resistances and actions. Chapter 2 deals with actions and deformations described in EN 1991. The permanent loads and vari¬able actions and in particular the imposed loads and the snow loads and wind actions are discussed. This chapter also contains three worked examples to determine the actions on a floor in a residential house, the actions on a free-standing platform canopy at a station and the wind actions on the façades of an office building. Chapter 3 is about modelling, discussing the schematisation of the structural system, the joints and the material properties as well as the cross-section properties. Chapter 4 deals with the classification of frames and the various analysis methods for unbraced and braced frames. Chapter 5 then goes deeper into these analysis methods to determine the force distribution and defor¬mations. Chapter 6 deals with the assessment by code-checking of (parts of) the steel structure with EN 1993-1-1 and EN 1993-1-8. At a basic level, the assessment of the resistance of cross-sections, the stability of members under axial forces and the resistance of bolted and welded connections are explained. Chapter 7 discusses in an extensive way the assessment by code-checking of the resistance of cross-sections, both for single and combined internal forces. The principles of the assessment of the resistance of cross-sections according to elastic and plastic theory are also discussed.

Download or read book Structural Steel Design to Eurocode 3 and AISC Specifications written by Claudio Bernuzzi and published by John Wiley & Sons. This book was released on 2016-02-25 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Steel Design to Eurocode 3 and AISC Specifications deals with the theory and practical applications of structural steel design in Europe and the USA. The book covers appropriate theoretical and background information, followed by a more design‐oriented coverage focusing on European and United States specifications and practices, allowing the reader to directly compare the approaches and results of both codes. Chapters follow a general plan, covering: A general section covering the relevant topics for the chapter, based on classical theory and recent research developments A detailed section covering design and detailing to Eurocode 3 specification A detailed section covering design and detailing to AISC specifications Fully worked examples are using both codes are presented. With construction companies working in increasingly international environments, engineers are more and more likely to encounter both codes. Written for design engineers and students of civil and structural engineering, this book will help both groups to become conversant with both code systems.

Download or read book Design of Steel Structures to Eurocodes written by Ioannis Vayas and published by Springer. This book was released on 2018-11-23 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook describes the rules for the design of steel and composite building structures according to Eurocodes, covering the structure as a whole, as well as the design of individual structural components and connections. It addresses the following topics: the basis of design in the Eurocodes framework; the loads applied to building structures; the load combinations for the various limit states of design and the main steel properties and steel fabrication methods; the models and methods of structural analysis in combination with the structural imperfections and the cross-section classification according to compactness; the cross-section resistances when subjected to axial and shear forces, bending or torsional moments and to combinations of the above; component design and more specifically the design of components sensitive to instability phenomena, such as flexural, torsional and lateral-torsional buckling (a section is devoted to composite beams); the design of connections and joints executed by bolting or welding, including beam to column connections in frame structures; and alternative configurations to be considered during the conceptual design phase for various types of single or multi-storey buildings, and the design of crane supporting beams. In addition, the fabrication and erection procedures, as well as the related quality requirements and the quality control methods are extensively discussed (including the procedures for bolting, welding and surface protection). The book is supplemented by more than fifty numerical examples that explain in detail the appropriate procedures to deal with each particular problem in the design of steel structures in accordance with Eurocodes. The book is an ideal learning resource for students of structural engineering, as well as a valuable reference for practicing engineers who perform designs on basis of Eurocodes.

Download or read book Fatigue Design of Steel and Composite Structures written by ECCS - European Convention for Constructional Steelwork and published by John Wiley & Sons. This book was released on 2018-06-26 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume addresses the specific subject of fatigue, a subject not familiar to many engineers, but still relevant for proper and good design of numerous steel structures. It explains all issues related to the subject: Basis of fatigue design, reliability and various verification formats, determination of stresses and stress ranges, fatigue strength, application range and limitations. It contains detailed examples of applications of the concepts, computation methods and verifications.

Download or read book Fatigue Design of Steel and Composite Structures written by Alain Nussbaumer and published by John Wiley & Sons. This book was released on 2012-01-09 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume addresses the specific subject of fatigue, a subject not familiar to many engineers, but still relevant for proper and good design of numerous steel structures. It explains all issues related to the subject: Basis of fatigue design, reliability and various verification formats, determination of stresses and stress ranges, fatigue strength, application range and limitations. It contains detailed examples of applications of the concepts, computation methods and verifications.

Download or read book Design of Joints in Steel and Composite Structures written by ECCS - European Convention for Constructional Steelwork and published by John Wiley & Sons. This book was released on 2016-06-22 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the basic concepts and the design rules included in Eurocode 3 Design of steel structures: Part 1-8 Design of joints Joints in composite construction are also addressed through references to Eurocode 4 Design of composite steel and concrete structures Part 1-1: General rules and rules for buildings. Attention has to be duly paid to the joints when designing a steel or composite structure, in terms of the global safety of the construction, and also in terms of the overall cost, including fabrication, transportation and erection. Therefore, in this book, the design of the joints themselves is widely detailed, and aspects of selection of joint configuration and integration of the joints into the analysis and the design process of the whole construction are also fully covered. Connections using mechanical fasteners, welded connections, simple joints, moment-resisting joints and lattice girder joints are considered. Various joint configurations are treated, including beam-to-column, beam-to-beam, column bases, and beam and column splice configurations, under different loading situations (axial forces, shear forces, bending moments and their combinations). The book also briefly summarises the available knowledge relating to the application of the Eurocode rules to joints under fire, fatigue, earthquake, etc., and also to joints in a structure subjected to exceptional loadings, where the risk of progressive collapse has to be mitigated. Finally, there are some worked examples, plus references to already published examples and to design tools, which will provide practical help to practitioners.

Download or read book Design of Joints in Steel Structures written by ECCS - European Convention for Constructional Steelwork and published by John Wiley & Sons. This book was released on 2017-06-19 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the basic concepts and the design rules included in Eurocode 3 "Design of steel structures" Part 1-8 "Design of joints". Joints in composite construction are also addressed through references to Eurocode 4 "Design of composite steel and concrete structures" Part 1-1 "General rules and rules for buildings". Moreover, the relevant UK National Annexes are also taken into account. Attention has to be duly paid to the joints when designing a steel or composite structure, in terms of the global safety of the construction, and also in terms of the overall cost, including fabrication, transportation and erection. Therefore, in this book, the design of the joints themselves is widely detailed, and aspects of selection of joint configuration and integration of the joints into the analysis and the design process of the whole construction are also fully covered. Connections using mechanical fasteners, welded connections, simple joints, moment-resisting joints and lattice girder joints are considered. Various joint configurations are treated, including beam-to-column, beam-to-beam, column bases, and beam and column splice configurations, under different loading situations (axial forces, shear forces, bending moments and their combinations). The book also briefly summarises the available knowledge relating to the application of the Eurocode rules to joints under fire, fatigue, earthquake, etc., and also to joints in a structure subjected to exceptional loadings, where the risk of progressive collapse has to be mitigated. Finally, there are some worked examples, plus references to already published examples and to design tools, which will provide practical help to practitioners.

Download or read book Design of Steel Concrete Composite Structures Using High Strength Materials written by J.Y. Richard Liew and published by Woodhead Publishing. This book was released on 2021-08-04 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-strength materials offer alternatives to frequently used materials for high-rise construction. A material of higher strength means a smaller member size is required to resist the design load. However, high-strength concrete is brittle, and high-strength thin steel plates are prone to local buckling. A solution to overcome such problems is to adopt a steel-concrete composite design in which concrete provides lateral restraint to steel plates against local buckling, and steel plates provide confinement to high-strength concrete. Design of Steel-Concrete Composite Structures Using High Strength Materials provides guidance on the design of composite steel-concrete structures using combined high-strength concretes and steels. The book includes a database of over 2,500 test results on composite columns to evaluate design methods, and presents calculations to determine critical parameters affecting the strength and ductility of high-strength composite columns. Finally, the book proposes design methods for axial-moment interaction curves in composite columns. This allows a unified approach to the design of columns with normal- and high-strength steel concrete materials. This book offers civil engineers, structural engineers, and researchers studying the mechanical performance of composite structures in the use of high-strength materials to design and construct advanced tall buildings. - Presents the design and construction of composite structures using high-strength concrete and high-strength steel, complementing and extending Eurocode 4 standards - Addresses a gap in design codes in the USA, China, Europe and Japan to cover composite structures using high-strength concrete and steel in a comprehensive way - Gives insight into the design of concrete-filled steel tubes and concrete-encased steel members - Suggests a unified approach to designing columns with normal- and high-strength steel and concrete

Download or read book Design of Steel Structures written by Luís Simões da Silva and published by John Wiley & Sons. This book was released on 2012-01-09 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the fundamental design concept of Eurocode 3 for current steel structures in building construction, and their practical application. Following a discussion of the basis of design, including the principles of reliability management and the limit state approach, the material standards and their use are detailed. The fundamentals of structural analysis and modeling are presented, followed by the design criteria and approaches for various types of structural members. The theoretical basis and checking procedures are closely tied to the Eurocode requirements. The following chapters expand on the principles and applications of elastic and plastic design, each exemplified by the step-by-step design calculation of a braced steel-framed building and an industrial building, respectively. Besides providing the necessary theoretical concepts for a good understanding, this manual intends to be a supporting tool for the use of practicing engineers. In order of this purpose, throughout the book, numerous worked examples are provided, concerning the analysis of steel structures and the design of elements under several types of actions. These examples will facilitate the acceptance of the code and provide for a smooth transition from earlier national codes to the Eurocode.

Download or read book Designers Guide to Eurocode 4 Design of Composite Structures EN 1994 2 written by Chris R Hendy and published by Thomas Telford. This book was released on 2006-08-23 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: EN 1994-2 is one standard of the Eurocode suite & describes the principles & requirements for safety, serviceability & durability of composite steel & concrete bridges. This guide provides the user with guidance on the interpretation & use of EN 1994-2 through worked examples in relation to the general rules & the rules for bridges.

Download or read book Design of Steel Concrete Composite Bridges to Eurocodes written by Ioannis Vayas and published by CRC Press. This book was released on 2013-08-29 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of Steel-Concrete Composite Bridges to Eurocodes centers on the new design rules incorporated in the EN-versions of the Eurocodes. This book targets students, especially at MSc level, and practicing engineers who need to become familiar with the new design rules incorporated in the EN-versions of the Eurocodes. Its focuses primarily on road bridges, although some information is provided for railway bridges, and presents the material in a concise manner.