Download or read book Control System Applications written by William S. Levine and published by CRC Press. This book was released on 2018-10-24 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control technology permeates every aspect of our lives. We rely on them to perform a wide variety of tasks without giving much thought to the origins of the technology or how it became such an important part of our lives. Control System Applications covers the uses of control systems, both in the common and in the uncommon areas of our lives. From the everyday to the unusual, it's all here. From process control to human-in-the-loop control, this book provides illustrations and examples of how these systems are applied. Each chapter contains an introduction to the application, a section defining terms and references, and a section on further readings that help you understand and use the techniques in your work environment. Highly readable and comprehensive, Control System Applications explores the uses of control systems. It illustrates the diversity of control systems and provides examples of how the theory can be applied to specific practical problems. It contains information about aspec ts of control that are not fully captured by the theory, such as techniques for protecting against controller failure and the role of cost and complexity in specifying controller designs.

Download or read book Automotive Fuel and Emissions Control Systems written by James D. Halderman and published by Prentice Hall. This book was released on 2006 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: James Halderman and James Linder are experts in their field. Their book is designed to help students studying for qualifications in Engine Performance and Drivability, Fuel Emissions System and Automotive Principles.

Download or read book NOx Emission Control Technologies in Stationary and Automotive Internal Combustion Engines written by B. Ashok and published by Elsevier. This book was released on 2021-11-09 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: NOx Emission Control Technologies in Stationary and Automotive Internal Combustion Engines: Approaches Toward NOx Free Automobiles presents the fundamental theory of emission formation, particularly the oxides of nitrogen (NOx) and its chemical reactions and control techniques. The book provides a simplified framework for technical literature on NOx reduction strategies in IC engines, highlighting thermodynamics, combustion science, automotive emissions and environmental pollution control. Sections cover the toxicity and roots of emissions for both SI and CI engines and the formation of various emissions such as CO, SO2, HC, NOx, soot, and PM from internal combustion engines, along with various methods of NOx formation. Topics cover the combustion process, engine design parameters, and the application of exhaust gas recirculation for NOx reduction, making this book ideal for researchers and students in automotive, mechanical, mechatronics and chemical engineering students working in the field of emission control techniques. - Covers advanced and recent technologies and emerging new trends in NOx reduction for emission control - Highlights the effects of exhaust gas recirculation (EGR) on engine performance parameters - Discusses emission norms such as EURO VI and Bharat stage VI in reducing global air pollution due to engine emissions

Download or read book New Technologies for Emission Control in Marine Diesel Engines written by Masaaki Okubo and published by Butterworth-Heinemann. This book was released on 2019-08-29 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Technologies for Emission Control in Marine Diesel Engines provides a unique overview on marine diesel engines and aftertreatment technologies that is based on the authors' extensive experience in research and development of emission control systems, especially plasma aftertreatment systems. The book covers new and updated technologies, such as combustion improvement and after treatment, SCR, the NOx reduction method, Ox scrubber, DPF, Electrostatic precipitator, Plasma PM decomposition, Plasma NOx reduction, and the Exhaust gas recirculation method. This comprehensive resource is ideal for marine engineers, engine manufacturers and consultants dealing with the development and implementation of aftertreatment systems in marine engines. - Includes recent advances and future trends of marine engines - Discusses new and innovative emission technologies for marine diesel engines and their regulations - Covers aftertreatment technologies that are not widely applied, such as catalysts, SCR, DPF and plasmas

Download or read book Fossil Fuel Emissions Control Technologies written by Bruce G. Miller and published by Butterworth-Heinemann. This book was released on 2015-05-15 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: An expert guide to emission control technologies and applications, Fossil Fuels Emissions Control Technologies provides engineers with a guide to link emission control strategies to available technologies, allowing them to choose the technology that best suits their individual need. This includes reduction technologies for Nitrogen Oxides, Sulfur Oxides, Mercury and Acid Gases. In this reference, the author explains the most critical control technologies and their application to real-world regulatory compliance issues. Numerous diagrams and examples emphasizing pollution formation mechanisms, key points in pollutant control, and design techniques are also included. - Provides numerous diagrams and examples to emphasize pollution formation mechanisms - Coverage of critical control technologies and their application to real-world solutions - Explains Sulfur Oxides, Acid Gases, Nitrogen Oxides Formation and Organic HAPs, Control and Reduction Technologies - Covers Particulate Matter and Mercury Emissions Formation and Reduction Technologies

Download or read book New Trends in Emission Control in the European Union written by Jerzy Merkisz and published by Springer Science & Business Media. This book was released on 2013-10-14 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses recent changes in the European legislation for exhaust emissions from motor vehicles. It starts with a comprehensive explanation of both the structure and range of applicability of new regulations, such as Euro 5 and Euro 6 for light-duty vehicles and Euro VI for heavy-duty vehicles. Then it introduces the most important issues in in-service conformity and conformity of production for vehicles, describing the latest procedures for performing exhaust emissions tests under both bench and operating conditions. Subsequently, it reports on portable emission measurement systems (PEMS) and their application for assessing the emissions of gaseous and particulate matter alike, under actual operating conditions and in all transport modes. Lastly, the book presents selected findings from exhaust emissions research on engines for a variety of transport vehicles, such as light-duty and heavy-duty vehicles, as well as non-road vehicles, which include farm tractors, groundwork and forest machinery, diesel locomotives, high-rail vehicles, combat vehicles and special-purpose vehicles. This work offers a valuable reference guide for researchers and professionals dealing with environmental regulations and vehicle manufacturing in the European Union.

Download or read book Automotive Emissions Regulations and Exhaust Aftertreatment Systems written by John Kasab and published by SAE International. This book was released on 2020-08-31 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to present a fundamental development of the science and engineering underlying the design of exhaust aftertreatment systems for automotive internal combustion engines. No pre-requisite knowledge of the field is required: our objective is to acquaint the reader, whom we expect to be new to the field of emissions control, with the underlying principles, control methods, common problems, and fuel effects on catalytic exhaust aftertreatment devices. We do this in hope that they can better understand the previous and current generations of emissions control, and improve upon them. This book is designed for the engineer, researcher, designer, student, or any combination of those, who is concerned with the control of automotive exhaust emissions. It includes discussion of theory and fundamentals applicable to hardware development.

Download or read book Air Quality Management in the United States written by Committee on Air Quality Management in the United States and published by National Academy Press. This book was released on 2004-09-13 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Managing the nation's air quality is a complex undertaking, involving tens of thousands of people in regulating thousands of pollution sources. The authors identify what has worked and what has not, and they offer wide-ranging recommendations for setting future priorities, making difficult choices, and increasing innovation. This new book explores how to better integrate scientific advances and new technologies into the air quality management system. The volume reviews the three-decade history of governmental efforts toward cleaner air, discussing how air quality standards are set and results measured, the design and implementation of control strategies, regulatory processes and procedures, special issues with mobile pollution sources, and more. The book looks at efforts to spur social and behavioral changes that affect air quality, the effectiveness of market-based instruments for air quality regulation, and many other aspects of the issue. Rich in technical detail, this book will be of interest to all those engaged in air quality management: scientists, engineers, industrial managers, law makers, regulators, health officials, clean-air advocates, and concerned citizens.

Download or read book Evaluating Vehicle Emissions Inspection and Maintenance Programs written by National Research Council and published by National Academies Press. This book was released on 2001-12-16 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emissions inspection and maintenance (I/M) programs subject vehicles to periodic inspections of their emission control systems. Despite widespread use of these programs in air-quality management, policy makers and the public have found a number of problems associated with them. Prominent among these issues is the perception that emissions benefits and other impacts of I/M programs have not been evaluated adequately. Evaluating Vehicle Emissions Inspection and Maintenance Programs assesses the effectiveness of these programs for reducing mobile source emissions. In this report, the committee evaluates the differences in the characteristics of motor vehicle emissions in areas with and without I/M programs, identifies criteria and methodologies for their evaluation, and recommends improvements to the programs. Most useful of all, this book will help summarize the observed benefits of these programs and how they can be redirected in the future to increase their effectiveness.

Download or read book Emission Control Systems and Automotive Fuel written by Zedong Huang and published by . This book was released on 2020-10 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book has been written with great emphasis on the troubleshooting and diagnostic aspects of the Emissions Control Systems as well as Automotive Fuel. The book encapsulates all the factors connected to the field of Emissions Control Systems and Automotive Fuel. The contents in this book have been written with coherence to the latest tasks of the NATEF. The book has also been written with an ample amount of focus upon the educational requirement of the students at universities across the globe for those who are doing a course in Automotive Fuels and Emissions Control Systems. Automotive experts have argued that better standards of training are required for the budding technicians in harnessing their skills as well as in diagnosing the procedures. The book will work towards fulfilling these basic as well as the fundamental needs of the technicians as well.

Download or read book Federal Register written by and published by . This book was released on 2012-07 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mustang 1964 1 2 1973 Restoration Guide written by and published by MotorBooks International. This book was released on 1998 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Modeling and Control of Internal Combustion Engine Systems written by Lino Guzzella and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Internal combustion engines still have a potential for substantial improvements, particularly with regard to fuel efficiency and environmental compatibility. These goals can be achieved with help of control systems. Modeling and Control of Internal Combustion Engines (ICE) addresses these issues by offering an introduction to cost-effective model-based control system design for ICE. The primary emphasis is put on the ICE and its auxiliary devices. Mathematical models for these processes are developed in the text and selected feedforward and feedback control problems are discussed. The appendix contains a summary of the most important controller analysis and design methods, and a case study that analyzes a simplified idle-speed control problem. The book is written for students interested in the design of classical and novel ICE control systems.

Download or read book The Ongoing Challenge of Managing Carbon Monoxide Pollution in Fairbanks Alaska written by National Research Council and published by National Academies Press. This book was released on 2002-08-22 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon monoxide (CO) is a toxic air pollutant produced largely from vehicle emissions. Breathing CO at high concentrations leads to reduced oxygen transport by hemoglobin, which has health effects that include impaired reaction timing, headaches, lightheadedness, nausea, vomiting, weakness, clouding of consciousness, coma, and, at high enough concentrations and long enough exposure, death. In recognition of those health effects, the U.S. Environmental Protection Agency (EPA), as directed by the Clean Air Act, established the health-based National Ambient Air Quality Standards (NAAQS) for CO in 1971. Most areas that were previously designated as "nonattainment" areas have come into compliance with the NAAQS for CO, but some locations still have difficulty in attaining the CO standards. Those locations tend to have topographical or meteorological characteristics that exacerbate pollution. In view of the challenges posed for some areas to attain compliance with the NAAQS for CO, congress asked the National Research Council to investigate the problem of CO in areas with meteorological and topographical problems. This interim report deals specifically with Fairbanks, Alaska. Fairbanks was chosen as a case study because its meteorological and topographical characteristics make it susceptible to severe winter inversions that trap CO and other pollutants at ground level.

Download or read book Nitrogen oxides NOx why and how they are controlled written by and published by DIANE Publishing. This book was released on 1999 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Current Air Quality Issues written by Farhad Nejadkoorki and published by BoD – Books on Demand. This book was released on 2015-10-21 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: Air pollution is thus far one of the key environmental issues in urban areas. Comprehensive air quality plans are required to manage air pollution for a particular area. Consequently, air should be continuously sampled, monitored, and modeled to examine different action plans. Reviews and research papers describe air pollution in five main contexts: Monitoring, Modeling, Risk Assessment, Health, and Indoor Air Pollution. The book is recommended to experts interested in health and air pollution issues.

Download or read book The Greenhouse Gas Protocol written by and published by World Business Pub.. This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The GHG Protocol Corporate Accounting and Reporting Standard helps companies and other organizations to identify, calculate, and report GHG emissions. It is designed to set the standard for accurate, complete, consistent, relevant and transparent accounting and reporting of GHG emissions.