Download or read book Embedded Mechatronics System Design for Uncertain Environments written by Cheng Siong Chin and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The book has been prepared for the needs of those who seek an application on developing embedded mechatronics system easy for control purposes. The choice of material is guided by the basic objective of making an engineer or student capable of dealing with embedded system design. The book can be used as a textbook, reference book, laboratory exercise for a first course in Linux®-based embedded system, xPC-Target, PIC-Microchip, ARDUINO®, and Raspberry Pi. The contents of the book are organized into seven main chapters with program codes. The main chapters include sections on Linux®-based system design, model-based simulation, and xPC-Target system design. In these chapters, it contains applications on various real-life systems such as the underwater robotics vehicle, vacuum cleaning, climbing robot for inspection, magnetic levitation for conveyor system, temperature monitoring, face recognition and vision-based inspection using camera, and vibration sensor. As it is not possible to cover every single subject in each chapter, the chapters therefore emphasize on certain topics in the embedded systems design process. The software adopted throughout the chapters are Ubuntu/ FedoraTM, PythonTM, QtTM, MATLAB®/Simulink®, and other open-source software development kits from PIC-Microchip, ARDUINO®, and R.
Download or read book Embedded Mechatronics System Design for Uncertain Environments written by Cheng Siong Chin and published by . This book was released on 2018 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book has been prepared for the needs of those who seek an application on developing embedded mechatronics system easy for control purposes. The choice of material is guided by the basic objective of making an engineer or student capable of dealing with embedded system design. The book can be used as a textbook, reference book, laboratory exercise for a first course in Linux®-based embedded system, xPC-Target, PIC-Microchip, ARDUINO®, and Raspberry Pi. The contents of the book are organized into seven main chapters with program codes. The main chapters include sections on Linux®-based system design, model-based simulation, and xPC-Target system design. In these chapters, it contains applications on various real-life systems such as the underwater robotics vehicle, vacuum cleaning, climbing robot for inspection, magnetic levitation for conveyor system, temperature monitoring, face recognition and vision-based inspection using camera, and vibration sensor. As it is not possible to cover every single subject in each chapter, the chapters therefore emphasize on certain topics in the embedded systems design process. The software adopted throughout the chapters are Ubuntu/ FedoraTM, PythonTM, QtTM, MATLAB®/Simulink®, and other open-source software development kits from PIC-Microchip, ARDUINO®, and R.
Download or read book Intelligent Virtual System for Underwater Vehicle Piloting using UnityTM written by Cheng Siong Chin and published by CRC Press. This book was released on 2020-12-22 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book supports readers in the development of a remotely operated vehicle (ROV) pilot training simulator by exploiting open-source or free gaming software and emphasizing the importance of using established and widely-available game design techniques to provide engaging scenarios for ROV training developers and trainees. There is no such book to guide the users to create an open-source virtual simulator for pilot training in the marine and offshore industry. This book can be used as a reference for undergraduate and postgraduate students, engineers, researchers, and lecturers in VR simulation using UnityTM as the leading software. Some of the key features of the book include: • Step-by-step procedures in development ROV pilot training simulator • Use of open-source software UnityTM that is freely available to all readers • The codes used in the book are self-sufficient as there are no codes hidden from readers
Download or read book Benchmark Models of Control System Design for Remotely Operated Vehicles written by Cheng Siong Chin and published by Springer Nature. This book was released on 2020-08-07 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to meet the needs of those who seek to develop control systems for ROVs when there is no model available during the initial design stage. The modeling, simulation and application of marine vehicles like underwater robotic vehicles (URVs) are multidisciplinary, and combine mathematical aspects from various engineering disciplines. URVs such as remotely operated vehicle (ROVs) are used for a wide range of applications such as exploring the extreme depths of our ocean, where a hard-wired link is still required. Most ROVs operate in extreme environments with uncertainties in the model prior to control system design. However, the method involved extensive testing before the system model could be used for any control actions. It has been found that the range of error can be extensive and uncertain in actual, continuously varying conditions. Hence, it is important to address the problem of reliance on model testing using different modeling approaches. In this book, approaches such as WAMIT, ANSYS-CFX, STAR CCM+, MATLAB and Simulink are used to model parameters for ROVs. A few benchmark models are provided, allowing researchers and students to explore and test different control schemes. Given its scope, the book offers a valuable reference guide for postgraduate and undergraduate students engaged in modeling and simulation for ROV control.
Download or read book Embedded Mechatronic Systems 2 written by Abdelkhalak El Hami and published by ISTE Press - Elsevier. This book was released on 2020-03-17 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded Mechatronic Systems 2: Analysis of Failures, Modeling, Simulation and Optimization presents advances in research within the field of mechatronic systems, which integrates reliability into the design process. Providing many detailed examples, this book develops a characterization methodology for faults in mechatronic systems. It analyzes the multi-physical modeling of faults, revealing weaknesses in design and failure mechanisms. This development of meta-models enables us to simulate effects on the reliability of conditions of use and manufacture. Provides many detailed examples Develops a characterization methodology for faults in mechatronic systems Analyzes the multi-physical modeling of faults, revealing weaknesses in design and failure mechanisms
Download or read book Embedded Mechatronics System Design for Uncertain Environments written by Cheng Siong Chin and published by Control, Robotics and Sensors. This book was released on 2019-01-30 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial machines, automobiles, airplanes, robots, and machines are among the myriad possible hosts of embedded systems. This book has been prepared for those who seek to easily develop and design embedded systems for control purposes in robotic vehicles.
Download or read book Mechatronic Systems in Engineering written by Sahin Yildirim and published by BoD – Books on Demand. This book was released on 2017-05-03 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book can serve as a reference resource for those very same design and control engineers who help connect their everyday experience in design with the control field of mechatronics. This book also consists of basic and main mechatronic system's laboratory applications for use in research and development departments in academia, government, and industry, and it can be used as a reference source in university libraries. It can also be used as a resource for scholars interested in understanding and explaining the engineering design and control process and for engineering students studying within the traditional structure of most engineering departments and colleges. It is evident that there is an expansion of mechatronics laboratories and classes in the university environment worldwide.
Download or read book Mechatronic Systems written by Clarence W. de Silva and published by CRC Press. This book was released on 2007-10-17 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics has emerged as its own discipline over the past decade, yet no reference has lived up to the demands of being a working guide for designing and implementing the new generation of mechatronic systems. Uniting an international team of leading experts, Mechatronic Systems: Devices, Design, Control, Operation and Monitoring rises to the ch
Download or read book Path Planning for Vehicles Operating in Uncertain 2D Environments written by Viacheslav Pshikhopov and published by Butterworth-Heinemann. This book was released on 2017-01-28 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Path Planning for Vehicles Operating in Uncertain 2D-environments presents a survey that includes several path planning methods developed using fuzzy logic, grapho-analytical search, neural networks, and neural-like structures, procedures of genetic search, and unstable motion modes. Presents a survey of accounting limitations imposed by vehicle dynamics Proposes modified and new original methods, including neural networking, grapho-analytical, and nature-inspired Gives tools for a novice researcher to select a method that would suit their needs or help to synthesize new hybrid methods
Download or read book Perspectives in Dynamical Systems I Mechatronics and Life Sciences written by Jan Awrejcewicz and published by Springer Nature. This book was released on 2022-01-04 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is part of collection of contributions devoted to analytical and experimental techniques of dynamical systems, presented at the 15th International Conference “Dynamical Systems: Theory and Applications”, held in Łódź, Poland on December 2-5, 2019. The wide selection of material has been divided into three volumes, each focusing on a different field of applications of dynamical systems. The broadly outlined focus of both the conference and these books includes bifurcations and chaos in dynamical systems, asymptotic methods in nonlinear dynamics, dynamics in life sciences and bioengineering, original numerical methods of vibration analysis, control in dynamical systems, optimization problems in applied sciences, stability of dynamical systems, experimental and industrial studies, vibrations of lumped and continuous systems, non-smooth systems, engineering systems and differential equations, mathematical approaches to dynamical systems, and mechatronics.
Download or read book Mechatronics System Design written by Devdas Shetty and published by CL Engineering. This book was released on 1996-12-31 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text responds to the emergence of a new course in the ME curriculum which combines electrical components such as actuators and sensors with mechanical elements in a system.
Download or read book Mechatronics System Design written by D. Shetty and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Embedded Computing and Mechatronics with the PIC32 Microcontroller written by Kevin Lynch and published by Newnes. This book was released on 2015-12-08 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the first time in a single reference, this book provides the beginner with a coherent and logical introduction to the hardware and software of the PIC32, bringing together key material from the PIC32 Reference Manual, Data Sheets, XC32 C Compiler User's Guide, Assembler and Linker Guide, MIPS32 CPU manuals, and Harmony documentation. This book also trains you to use the Microchip documentation, allowing better life-long learning of the PIC32. The philosophy is to get you started quickly, but to emphasize fundamentals and to eliminate "magic steps" that prevent a deep understanding of how the software you write connects to the hardware. Applications focus on mechatronics: microcontroller-controlled electromechanical systems incorporating sensors and actuators. To support a learn-by-doing approach, you can follow the examples throughout the book using the sample code and your PIC32 development board. The exercises at the end of each chapter help you put your new skills to practice. Coverage includes: A practical introduction to the C programming language Getting up and running quickly with the PIC32 An exploration of the hardware architecture of the PIC32 and differences among PIC32 families Fundamentals of embedded computing with the PIC32, including the build process, time- and memory-efficient programming, and interrupts A peripheral reference, with extensive sample code covering digital input and output, counter/timers, PWM, analog input, input capture, watchdog timer, and communication by the parallel master port, SPI, I2C, CAN, USB, and UART An introduction to the Microchip Harmony programming framework Essential topics in mechatronics, including interfacing sensors to the PIC32, digital signal processing, theory of operation and control of brushed DC motors, motor sizing and gearing, and other actuators such as stepper motors, RC servos, and brushless DC motors For more information on the book, and to download free sample code, please visit http://www.nu32.org Extensive, freely downloadable sample code for the NU32 development board incorporating the PIC32MX795F512H microcontroller Free online instructional videos to support many of the chapters
Download or read book Modeling Identification and Control for Cyber Physical Systems Towards Industry 4 0 written by Paolo Mercorelli and published by Elsevier. This book was released on 2024-01-19 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling, Identification, and Control for Cyber-Physical Systems Towards Industry 4.0 studies and analyzes the role of algorithms in identifying and controlling such a system towards Industry 4.0, which is the digital transformation of manufacturing and related industries and value creation processes. This book focuses on the conception and implementation of intelligent algorithms. It will help readers who work on sensors, virtual sensors, actuators and virtual actuators embedded systems, network infrastructures, servers with computing and storage capacity, autonomous computing software, real-time data processing, and database graphical user interfaces wireless networking technologies. Cyber-Physical Systems are network components that coordinate physical actions with each other. These autonomous systems perceive their surroundings using virtual sensors and actively influence them via virtual actuators. Adaptable and continuously evolving, these systems free up skilled workers to perform complex tasks, avoiding productivity loss and re-work. Provides the new and cutting-edge research and development and a series of guidance procedures for potential applications from academic research to industrial R&D Focuses on the conception and implementation of intelligent algorithms Covers a wide spectrum of topics, including sensors, virtual sensors, actuators and virtual actuators embedded systems, network infrastructures, servers with computing and storage capacity, autonomous computing software, real-time data processing, and database graphical user interfaces wireless networking technologies
Download or read book The Digital Twin written by Noel Crespi and published by Springer Nature. This book was released on 2023-06-02 with total page 1226 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Digital Twin book is about harnessing the power of technology, business practices, and the digital infrastructure to make revolutionary improvements for the benefit of society. Ninety experts from around the world contributed to summarize four decades of digital advances and successes, and to define the Digital Twin’s potential for the decades ahead. The book describes how Digital Twins will play a key role in specific applications and across important sectors of the global economy, making it a must-read for executives, policymakers, technical leaders, researchers, and students alike. The book consists of thirty-eight chapters that cover Digital Twin concepts, supporting technologies, practices, and specific implementation strategies for various production and service sectors. Digital Twins are about creating faster, less expensive, and error-free manufacturing, products, processes, and services. This includes engineering of systems for energy, communications, construction, transportation, and food processing. It also covers solutions for making human existence better and more enjoyable through the life sciences, smart cities, and artistic creations. The Digital Twin’s functionality addresses the entire lifecycle of products and services. Importantly, the book describes the journey required for businesses and public organizations to embrace Digital Twins as part of their tool kit. The Digital Twin is the ideal starting point for teaching and research in all application domains.
Download or read book Foundations of Multi Paradigm Modelling for Cyber Physical Systems written by Paulo Carreira and published by Springer Nature. This book was released on 2020-05-07 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book coherently gathers well-founded information on the fundamentals of and formalisms for modelling cyber-physical systems (CPS). Highlighting the cross-disciplinary nature of CPS modelling, it also serves as a bridge for anyone entering CPS from related areas of computer science or engineering. Truly complex, engineered systems—known as cyber-physical systems—that integrate physical, software, and network aspects are now on the rise. However, there is no unifying theory nor systematic design methods, techniques or tools for these systems. Individual (mechanical, electrical, network or software) engineering disciplines only offer partial solutions. A technique known as Multi-Paradigm Modelling has recently emerged suggesting to model every part and aspect of a system explicitly, at the most appropriate level(s) of abstraction, using the most appropriate modelling formalism(s), and then weaving the results together to form a representation of the system. If properly applied, it enables, among other global aspects, performance analysis, exhaustive simulation, and verification. This book is the first systematic attempt to bring together these formalisms for anyone starting in the field of CPS who seeks solid modelling foundations and a comprehensive introduction to the distinct existing techniques that are multi-paradigmatic. Though chiefly intended for master and post-graduate level students in computer science and engineering, it can also be used as a reference text for practitioners.
Download or read book Handbook of Research on Advancements in Robotics and Mechatronics written by Habib, Maki K. and published by IGI Global. This book was released on 2014-12-31 with total page 1123 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of mechatronics integrates modern engineering science and technologies with new ways of thinking, enhancing the design of products and manufacturing processes. This synergy enables the creation and evolution of new intelligent human-oriented machines. The Handbook of Research on Advancements in Robotics and Mechatronics presents new findings, practices, technological innovations, and theoretical perspectives on the the latest advancements in the field of mechanical engineering. This book is of great use to engineers and scientists, students, researchers, and practitioners looking to develop autonomous and smart products and systems for meeting todays challenges.
