Download or read book Embedded Systems Design using the MSP430FR2355 LaunchPadTM written by Brock J. LaMeres and published by Springer Nature. This book was released on 2020-06-19 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook for courses in Embedded Systems introduces students to necessary concepts, through a hands-on approach. LEARN BY EXAMPLE – This book is designed to teach the material the way it is learned, through example. Every concept is supported by numerous programming examples that provide the reader with a step-by-step explanation for how and why the computer is doing what it is doing. LEARN BY DOING – This book targets the Texas Instruments MSP430 microcontroller. This platform is a widely popular, low-cost embedded system that is used to illustrate each concept in the book. The book is designed for a reader that is at their computer with an MSP430FR2355 LaunchPadTM Development Kit plugged in so that each example can be coded and run as they learn. LEARN BOTH ASSEMBLY AND C – The book teaches the basic operation of an embedded computer using assembly language so that the computer operation can be explored at a low-level. Once more complicated systems are introduced (i.e., timers, analog-to-digital converters, and serial interfaces), the book moves into the C programming language. Moving to C allows the learner to abstract the operation of the lower-level hardware and focus on understanding how to “make things work”. BASED ON SOUND PEDAGOGY - This book is designed with learning outcomes and assessment at its core. Each section addresses a specific learning outcome that the student should be able to “do” after its completion. The concept checks and exercise problems provide a rich set of assessment tools to measure student performance on each outcome.

Download or read book Embedded Computer Systems Architectures Modeling and Simulation written by Dionisios N. Pnevmatikatos and published by Springer. This book was released on 2019-08-09 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 19th International Conference on Embedded Computer Systems: Architectures, Modeling, and Simulation, SAMOS 2019, held in Pythagorion, Samos, Greece, in July 2019. The 21 regular papers presented were carefully reviewed and selected from 55 submissions. The papers are organized in topical sections on system design space exploration; deep learning optimization; system security; multi/many-core scheduling; system energy and heat management; many-core communication; and electronic system-level design and verification. In addition there are 13 papers from three special sessions which were organized on topics of current interest: insights from negative results; machine learning implementations; and European projects.

Download or read book Modern Embedded Computing written by Peter Barry and published by Elsevier. This book was released on 2012-01-27 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern embedded systems are used for connected, media-rich, and highly integrated handheld devices such as mobile phones, digital cameras, and MP3 players. This book provides an understanding of the platform architecture of modern embedded computing systems that drive mobile devices.

Download or read book Computer Systems An Embedded Approach written by Ian McLoughlin and published by McGraw Hill Professional. This book was released on 2018-07-14 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Incorporate embedded computing technology in projects and devices of all sizesThis comprehensive engineering textbook lays out foundational computer architecture principles and teaches, step by step, how to apply those concepts in cutting-edge embedded applications. The book includes everything you need to know about embedded computing—from fundamentals and processor internals to networking and connectivity.Computer Systems: An Embedded Approach begins by thoroughly explaining constituent hardware components, including processors, storage devices, and accelerators. From there, the book shows how operating systems work and how they provide a layer of services between hardware and software. You will get coverage of foundational networking, pervasive computing concepts, and the Internet of Things (IoT). The book concludes with a look to the future of embedded computing systems.•This single resource takes readers right up to being ready to learn programming•Covers code aspects from the IEEE, POSIX, and OSI models •Written by a recognized academic and experienced author

Download or read book Introduction to Embedded Systems Second Edition written by Edward Ashford Lee and published by MIT Press. This book was released on 2017-01-06 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the engineering principles of embedded systems, with a focus on modeling, design, and analysis of cyber-physical systems. The most visible use of computers and software is processing information for human consumption. The vast majority of computers in use, however, are much less visible. They run the engine, brakes, seatbelts, airbag, and audio system in your car. They digitally encode your voice and construct a radio signal to send it from your cell phone to a base station. They command robots on a factory floor, power generation in a power plant, processes in a chemical plant, and traffic lights in a city. These less visible computers are called embedded systems, and the software they run is called embedded software. The principal challenges in designing and analyzing embedded systems stem from their interaction with physical processes. This book takes a cyber-physical approach to embedded systems, introducing the engineering concepts underlying embedded systems as a technology and as a subject of study. The focus is on modeling, design, and analysis of cyber-physical systems, which integrate computation, networking, and physical processes. The second edition offers two new chapters, several new exercises, and other improvements. The book can be used as a textbook at the advanced undergraduate or introductory graduate level and as a professional reference for practicing engineers and computer scientists. Readers should have some familiarity with machine structures, computer programming, basic discrete mathematics and algorithms, and signals and systems.

Download or read book Computers as Components written by Marilyn Wolf and published by Morgan Kaufmann. This book was released on 2008-07-08 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computers as Components, Second Edition, updates the first book to bring essential knowledge on embedded systems technology and techniques under a single cover. This edition has been updated to the state-of-the-art by reworking and expanding performance analysis with more examples and exercises, and coverage of electronic systems now focuses on the latest applications. It gives a more comprehensive view of multiprocessors including VLIW and superscalar architectures as well as more detail about power consumption. There is also more advanced treatment of all the components of the system as well as in-depth coverage of networks, reconfigurable systems, hardware-software co-design, security, and program analysis. It presents an updated discussion of current industry development software including Linux and Windows CE. The new edition's case studies cover SHARC DSP with the TI C5000 and C6000 series, and real-world applications such as DVD players and cell phones. Researchers, students, and savvy professionals schooled in hardware or software design, will value Wayne Wolf's integrated engineering design approach. * Uses real processors (ARM processor and TI C55x DSP) to demonstrate both technology and techniques...Shows readers how to apply principles to actual design practice.* Covers all necessary topics with emphasis on actual design practice...Realistic introduction to the state-of-the-art for both students and practitioners.* Stresses necessary fundamentals which can be applied to evolving technologies...helps readers gain facility to design large, complex embedded systems that actually work.

Download or read book Embedded Systems and Computer Architecture written by Graham R Wilson and published by Elsevier. This book was released on 2001-12-17 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author has taught the design and use of microprocessor systems to undergraduate and technician level students for over 25 years. A core text for academic modules on microprocessors, embedded systems and computer architecture A practical design-orientated approach

Download or read book Designing Embedded Hardware written by John Catsoulis and published by "O'Reilly Media, Inc.". This book was released on 2005-05-16 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded computer systems literally surround us: they're in our cell phones, PDAs, cars, TVs, refrigerators, heating systems, and more. In fact, embedded systems are one of the most rapidly growing segments of the computer industry today.Along with the growing list of devices for which embedded computer systems are appropriate, interest is growing among programmers, hobbyists, and engineers of all types in how to design and build devices of their own. Furthermore, the knowledge offered by this book into the fundamentals of these computer systems can benefit anyone who has to evaluate and apply the systems.The second edition of Designing Embedded Hardware has been updated to include information on the latest generation of processors and microcontrollers, including the new MAXQ processor. If you're new to this and don't know what a MAXQ is, don't worry--the book spells out the basics of embedded design for beginners while providing material useful for advanced systems designers.Designing Embedded Hardware steers a course between those books dedicated to writing code for particular microprocessors, and those that stress the philosophy of embedded system design without providing any practical information. Having designed 40 embedded computer systems of his own, author John Catsoulis brings a wealth of real-world experience to show readers how to design and create entirely new embedded devices and computerized gadgets, as well as how to customize and extend off-the-shelf systems.Loaded with real examples, this book also provides a roadmap to the pitfalls and traps to avoid. Designing Embedded Hardware includes: The theory and practice of embedded systems Understanding schematics and data sheets Powering an embedded system Producing and debugging an embedded system Processors such as the PIC, Atmel AVR, and Motorola 68000-series Digital Signal Processing (DSP) architectures Protocols (SPI and I2C) used to add peripherals RS-232C, RS-422, infrared communication, and USB CAN and Ethernet networking Pulse Width Monitoring and motor control If you want to build your own embedded system, or tweak an existing one, this invaluable book gives you the understanding and practical skills you need.

Download or read book Making Embedded Systems written by Elecia White and published by "O'Reilly Media, Inc.". This book was released on 2011-10-25 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interested in developing embedded systems? Since they donâ??t tolerate inefficiency, these systems require a disciplined approach to programming. This easy-to-read guide helps you cultivate a host of good development practices, based on classic software design patterns and new patterns unique to embedded programming. Learn how to build system architecture for processors, not operating systems, and discover specific techniques for dealing with hardware difficulties and manufacturing requirements. Written by an expert whoâ??s created embedded systems ranging from urban surveillance and DNA scanners to childrenâ??s toys, this book is ideal for intermediate and experienced programmers, no matter what platform you use. Optimize your system to reduce cost and increase performance Develop an architecture that makes your software robust in resource-constrained environments Explore sensors, motors, and other I/O devices Do more with less: reduce RAM consumption, code space, processor cycles, and power consumption Learn how to update embedded code directly in the processor Discover how to implement complex mathematics on small processors Understand what interviewers look for when you apply for an embedded systems job "Making Embedded Systems is the book for a C programmer who wants to enter the fun (and lucrative) world of embedded systems. Itâ??s very well writtenâ??entertaining, evenâ??and filled with clear illustrations." â??Jack Ganssle, author and embedded system expert.

Download or read book Embedded Systems written by Krzysztof Iniewski and published by John Wiley & Sons. This book was released on 2012-10-26 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the significant embedded computing technologies highlighting their applications in wireless communication and computing power An embedded system is a computer system designed for specific control functions within a larger system often with real-time computing constraints. It is embedded as part of a complete device often including hardware and mechanical parts. Presented in three parts, Embedded Systems: Hardware, Design, and Implementation provides readers with an immersive introduction to this rapidly growing segment of the computer industry. Acknowledging the fact that embedded systems control many of today's most common devices such as smart phones, PC tablets, as well as hardware embedded in cars, TVs, and even refrigerators and heating systems, the book starts with a basic introduction to embedded computing systems. It hones in on system-on-a-chip (SoC), multiprocessor system-on-chip (MPSoC), and network-on-chip (NoC). It then covers on-chip integration of software and custom hardware accelerators, as well as fabric flexibility, custom architectures, and the multiple I/O standards that facilitate PCB integration. Next, it focuses on the technologies associated with embedded computing systems, going over the basics of field-programmable gate array (FPGA), digital signal processing (DSP) and application-specific integrated circuit (ASIC) technology, architectural support for on-chip integration of custom accelerators with processors, and O/S support for these systems. Finally, it offers full details on architecture, testability, and computer-aided design (CAD) support for embedded systems, soft processors, heterogeneous resources, and on-chip storage before concluding with coverage of software support in particular, O/S Linux. Embedded Systems: Hardware, Design, and Implementation is an ideal book for design engineers looking to optimize and reduce the size and cost of embedded system products and increase their reliability and performance.

Download or read book Embedded System Design written by Peter Marwedel and published by Springer Science & Business Media. This book was released on 2010-11-16 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until the late 1980s, information processing was associated with large mainframe computers and huge tape drives. During the 1990s, this trend shifted toward information processing with personal computers, or PCs. The trend toward miniaturization continues and in the future the majority of information processing systems will be small mobile computers, many of which will be embedded into larger products and interfaced to the physical environment. Hence, these kinds of systems are called embedded systems. Embedded systems together with their physical environment are called cyber-physical systems. Examples include systems such as transportation and fabrication equipment. It is expected that the total market volume of embedded systems will be significantly larger than that of traditional information processing systems such as PCs and mainframes. Embedded systems share a number of common characteristics. For example, they must be dependable, efficient, meet real-time constraints and require customized user interfaces (instead of generic keyboard and mouse interfaces). Therefore, it makes sense to consider common principles of embedded system design. Embedded System Design starts with an introduction into the area and a survey of specification models and languages for embedded and cyber-physical systems. It provides a brief overview of hardware devices used for such systems and presents the essentials of system software for embedded systems, like real-time operating systems. The book also discusses evaluation and validation techniques for embedded systems. Furthermore, the book presents an overview of techniques for mapping applications to execution platforms. Due to the importance of resource efficiency, the book also contains a selected set of optimization techniques for embedded systems, including special compilation techniques. The book closes with a brief survey on testing. Embedded System Design can be used as a text book for courses on embedded systems and as a source which provides pointers to relevant material in the area for PhD students and teachers. It assumes a basic knowledge of information processing hardware and software. Courseware related to this book is available at http://ls12-www.cs.tu-dortmund.de/~marwedel.

Download or read book Rugged Embedded Systems written by Augusto Vega and published by Morgan Kaufmann. This book was released on 2016-12-02 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rugged Embedded Systems: Computing in Harsh Environments describes how to design reliable embedded systems for harsh environments, including architectural approaches, cross-stack hardware/software techniques, and emerging challenges and opportunities. A "harsh environment" presents inherent characteristics, such as extreme temperature and radiation levels, very low power and energy budgets, strict fault tolerance and security constraints, etc. that challenge the computer system in its design and operation. To guarantee proper execution (correct, safe, and low-power) in such scenarios, this contributed work discusses multiple layers that involve firmware, operating systems, and applications, as well as power management units and communication interfaces. This book also incorporates use cases in the domains of unmanned vehicles (advanced cars and micro aerial robots) and space exploration as examples of computing designs for harsh environments. Provides a deep understanding of embedded systems for harsh environments by experts involved in state-of-the-art autonomous vehicle-related projects Covers the most important challenges (fault tolerance, power efficiency, and cost effectiveness) faced when developing rugged embedded systems Includes case studies exploring embedded computing for autonomous vehicle systems (advanced cars and micro aerial robots) and space exploration

Download or read book Embedded Systems Programming in C and Assembly written by John Forrest Brown and published by Kluwer Academic Pub. This book was released on 1994 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This programming guide explains concepts, basic techniques, and common problems related to embedded systems software development. It features source code templates that can be used and reused in developing embedded software. Source code examples are included for both Intel and Motorola systems on a 3.5-inch diskette.

Download or read book Design Principles for Embedded Systems written by KCS Murti and published by Springer Nature. This book was released on 2021-09-20 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is designed to serve as a textbook for courses offered to graduate and undergraduate students enrolled in electronics and electrical engineering and computer science. This book attempts to bridge the gap between electronics and computer science students, providing complementary knowledge that is essential for designing an embedded system. The book covers key concepts tailored for embedded system design in one place. The topics covered in this book are models and architectures, Executable Specific Languages – SystemC, Unified Modeling Language, real-time systems, real-time operating systems, networked embedded systems, Embedded Processor architectures, and platforms that are secured and energy-efficient. A major segment of embedded systems needs hard real-time requirements. This textbook includes real-time concepts including algorithms and real-time operating system standards like POSIX threads. Embedded systems are mostly distributed and networked for deterministic responses. The book covers how to design networked embedded systems with appropriate protocols for real-time requirements. Each chapter contains 2-3 solved case studies and 10 real-world problems as exercises to provide detailed coverage and essential pedagogical tools that make this an ideal textbook for students enrolled in electrical and electronics engineering and computer science programs.

Download or read book High Performance Embedded Computing written by Wayne Wolf and published by Elsevier. This book was released on 2010-07-26 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past several years, embedded systems have emerged as an integral though unseen part of many consumer, industrial, and military devices. The explosive growth of these systems has resulted in embedded computing becoming an increasingly important discipline. The need for designers of high-performance, application-specific computing systems has never been greater, and many universities and colleges in the US and worldwide are now developing advanced courses to help prepare their students for careers in embedded computing.High-Performance Embedded Computing: Architectures, Applications, and Methodologies is the first book designed to address the needs of advanced students and industry professionals. Focusing on the unique complexities of embedded system design, the book provides a detailed look at advanced topics in the field, including multiprocessors, VLIW and superscalar architectures, and power consumption. Fundamental challenges in embedded computing are described, together with design methodologies and models of computation. HPEC provides an in-depth and advanced treatment of all the components of embedded systems, with discussions of the current developments in the field and numerous examples of real-world applications. Covers advanced topics in embedded computing, including multiprocessors, VLIW and superscalar architectures, and power consumption Provides in-depth coverage of networks, reconfigurable systems, hardware-software co-design, security, and program analysis Includes examples of many real-world embedded computing applications (cell phones, printers, digital video) and architectures (the Freescale Starcore, TI OMAP multiprocessor, the TI C5000 and C6000 series, and others)

Download or read book Embedded Computing written by Joseph A. Fisher and published by Elsevier. This book was released on 2005 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Embedded Computing is enthralling in its clarity and exhilarating in its scope. If the technology you are working on is associated with VLIWs or "embedded computing", then clearly it is imperative that you read this book. If you are involved in computer system design or programming, you must still read this book, because it will take you to places where the views are spectacular. You don't necessarily have to agree with every point the authors make, but you will understand what they are trying to say, and they will make you think.” From the Foreword by Robert Colwell, R&E Colwell & Assoc. Inc The fact that there are more embedded computers than general-purpose computers and that we are impacted by hundreds of them every day is no longer news. What is news is that their increasing performance requirements, complexity and capabilities demand a new approach to their design. Fisher, Faraboschi, and Young describe a new age of embedded computing design, in which the processor is central, making the approach radically distinct from contemporary practices of embedded systems design. They demonstrate why it is essential to take a computing-centric and system-design approach to the traditional elements of nonprogrammable components, peripherals, interconnects and buses. These elements must be unified in a system design with high-performance processor architectures, microarchitectures and compilers, and with the compilation tools, debuggers and simulators needed for application development. In this landmark text, the authors apply their expertise in highly interdisciplinary hardware/software development and VLIW processors to illustrate this change in embedded computing. VLIW architectures have long been a popular choice in embedded systems design, and while VLIW is a running theme throughout the book, embedded computing is the core topic. Embedded Computing examines both in a book filled with fact and opinion based on the authors many years of R&D experience. Features: · Complemented by a unique, professional-quality embedded tool-chain on the authors' website, http://www.vliw.org/book · Combines technical depth with real-world experience · Comprehensively explains the differences between general purpose computing systems and embedded systems at the hardware, software, tools and operating system levels. · Uses concrete examples to explain and motivate the trade-offs.

Download or read book Embedded Operating Systems written by Alan Holt and published by Springer. This book was released on 2018-02-13 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This easy-to- follow textbook/reference guides the reader through the creation of a fully functional embedded operating system, from its source code, in order to develop a deeper understanding of each component and how they work together. The text describes in detail the procedure for building the bootloader, kernel, filesystem, shared libraries, start-up scripts, configuration files and system utilities, to produce a GNU/Linux operating system. This fully updated second edition also includes new material on virtual machine technologies such as VirtualBox, Vagrant and the Linux container system Docker. Topics and features: presents an overview of the GNU/Linux system, introducing the components of the system, and covering aspects of process management, input/output and environment; discusses containers and the underlying kernel technology upon which they are based; provides a detailed examination of the GNU/Linux filesystem; explains how to build an embedded system under a virtual machine, and how to build an embedded system to run natively on an actual processor;introduces the concept of the compiler toolchain, and reviews the platforms BeagleBone and Raspberry Pi; describes how to build firmware images for devices running the Openwrt operating system. The hands-on nature and clearly structured approach of this textbook will appeal strongly to practically minded undergraduate and graduate level students, as well as to industry professionals involved in this area.