Download or read book Electrode Processes Relevant to Fuel Cell Technology written by V. Birss and published by The Electrochemical Society. This book was released on 2010-10 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of ECS Transactions includes some of the key contributions made to the symposium, entitled 'Electrode Processes Relevant to Fuel Cell Technology¿, held during the 217th meeting of The Electrochemical Society, in Vancouver, Canada, from April 25 to 30, 2010. Some of the key topics that were addressed include fundamental kinetics and mechanisms of multi-step reactions, especially the oxygen reduction reaction; kinetics and mechanisms of poisoning and other electrode degradation processes; modeling, simulation, and evaluation of electrode microstructure/performance relationships and related phenomena; computational modeling of fuel cell reaction mechanisms and kinetics at the molecular level; interfacial aspects; novel electrode materials; and new techniques to probe fuel cell electrode reactions.
Download or read book Solid Oxide Fuel Cell Technology written by K Huang and published by Elsevier. This book was released on 2009-07-30 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: High temperature solid oxide fuel cell (SOFC) technology is a promising power generation option that features high electrical efficiency and low emissions of environmentally polluting gases such as CO2, NOox and SOx. It is ideal for distributed stationary power generation applications where both high-efficiency electricity and high-quality heat are in strong demand. For the past few decades, SOFC technology has attracted intense worldwide R&D effort and, along with polymer electrolyte membrane fuel cell (PEMFC) technology, has undergone extensive commercialization development. This book presents a systematic and in-depth narrative of the technology from the perspective of fundamentals, providing comprehensive theoretical analysis and innovative characterization techniques for SOFC technology. The book initially deals with the basics and development of SOFC technology from cell materials to fundamental thermodynamics, electronic properties of solids and charged particle transport. This coverage is extended with a thorough analysis of such operational features as current flow and energy balance, and on to voltage losses and electrical efficiency. Furthermore, the book also covers the important issues of fuel cell stability and durability with chapters on performance characterization, fuel processing, and electrode poisoning. Finally, the book provides a comprehensive review for SOFC materials and fabrication techniques. A series of useful scientific appendices rounds off the book. Solid oxide fuel cell technology is a standard reference for all those researching this important field as well as those working in the power industry. Provides a comprehensive review of solid oxide fuel cells from history and design to chemistry and materials development Presents analysis of operational features including current flow, energy balance, voltage losses and electrical efficiency Explores fuel cell stability and durability with specific chapters examining performance characterization, fuel processing and electrode poisoning
Download or read book Fuel Cell Science and Engineering 2 Volume Set written by Detlef Stolten and published by John Wiley & Sons. This book was released on 2012-05-21 with total page 1298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel cells are expected to play a major role in the future power supply that will transform to renewable, decentralized and fluctuating primary energies. At the same time the share of electric power will continually increase at the expense of thermal and mechanical energy not just in transportation, but also in households. Hydrogen as a perfect fuel for fuel cells and an outstanding and efficient means of bulk storage for renewable energy will spearhead this development together with fuel cells. Moreover, small fuel cells hold great potential for portable devices such as gadgets and medical applications such as pacemakers. This handbook will explore specific fuel cells within and beyond the mainstream development and focuses on materials and production processes for both SOFC and lowtemperature fuel cells, analytics and diagnostics for fuel cells, modeling and simulation as well as balance of plant design and components. As fuel cells are getting increasingly sophisticated and industrially developed the issues of quality assurance and methodology of development are included in this handbook. The contributions to this book come from an international panel of experts from academia, industry, institutions and government. This handbook is oriented toward people looking for detailed information on specific fuel cell types, their materials, production processes, modeling and analytics. Overview information on the contrary on mainstream fuel cells and applications are provided in the book 'Hydrogen and Fuel Cells', published in 2010.
Download or read book Fuel Cells written by Supramaniam Srinivasan and published by Springer Science & Business Media. This book was released on 2006-12-31 with total page 707 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise sourcebook of the electrochemical, engineering and economic principles involved in the development and commercialization of fuel cells offers a thorough review of applications and techno-economic assessment of fuel cell technologies, plus in-depth discussion of conventional and novel approaches for generating energy. Parts I and II explain basic and applied electrochemistry relevant to an understanding of fuel cells. Part III covers engineering and technology aspects. The book is useful for undergraduate and graduate students and scientists interested in fuel cells. Unlike any other current book on fuel cells, each chapter includes problems based on the discussions in the text.
Download or read book Fuel Cell Fundamentals written by Ryan O'Hayre and published by John Wiley & Sons. This book was released on 2016-04-13 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete, up-to-date, introductory guide to fuel cell technology and application Fuel Cell Fundamentals provides a thorough introduction to the principles and practicalities behind fuel cell technology. Beginning with the underlying concepts, the discussion explores fuel cell thermodynamics, kinetics, transport, and modeling before moving into the application side with guidance on system types and design, performance, costs, and environmental impact. This new third edition has been updated with the latest technological advances and relevant calculations, and enhanced chapters on advanced fuel cell design and electrochemical and hydrogen energy systems. Worked problems, illustrations, and application examples throughout lend a real-world perspective, and end-of chapter review questions and mathematical problems reinforce the material learned. Fuel cells produce more electricity than batteries or combustion engines, with far fewer emissions. This book is the essential introduction to the technology that makes this possible, and the physical processes behind this cost-saving and environmentally friendly energy source. Understand the basic principles of fuel cell physics Compare the applications, performance, and costs of different systems Master the calculations associated with the latest fuel cell technology Learn the considerations involved in system selection and design As more and more nations turn to fuel cell commercialization amidst advancing technology and dropping deployment costs, global stationary fuel cell revenue is expected to grow from $1.4 billion to $40.0 billion by 2022. The sector is forecasted to explode, and there will be a tremendous demand for high-level qualified workers with advanced skills and knowledge of fuel cell technology. Fuel Cell Fundamentals is the essential first step toward joining the new energy revolution.
Download or read book Ammonia Fuel Cells written by Ibrahim Dincer and published by Elsevier. This book was released on 2020-04-09 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ammonia Fuel Cells covers all aspects of ammonia fuel cell technologies and their applications, including their theoretical analysis, modeling studies and experimental investigations. The book analyzes the role of integrated ammonia fuel cell systems within various renewable energy resources and existing energy systems. Covers the types of ammonia fuel cells that have been developed over history Features explanations of the underlying fundamentals and principles of ammonia fuel cells, along with methods to assess the performance of different types of cell Includes case studies considering different applications of ammonia fuel cells and their significance in the future of clean energy
Download or read book Fuel Cells and Hydrogen written by Viktor Hacker and published by Elsevier. This book was released on 2018-07-20 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Cells and Hydrogen: From Fundamentals to Applied Research provides an overview of the basic principles of fuel cell and hydrogen technology, which subsequently allows the reader to delve more deeply into applied research. In addition to covering the basic principles of fuel cells and hydrogen technologies, the book examines the principles and methods to develop and test fuel cells, the evaluation of the performance and lifetime of fuel cells and the concepts of hydrogen production. Fuel Cells and Hydrogen: From Fundamentals to Applied Research acts as an invaluable reference book for fuel cell developers and students, researchers in industry entering the area of fuel cells and lecturers teaching fuel cells and hydrogen technology. Includes laboratory methods for fuel cell characterization and manufacture Outlines approaches in modelling components, cells and stacks Covers practical and theoretical methods for hydrogen production and storage
Download or read book Electrochemical Processes in Fuel Cells written by Manfred W. Breiter and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: The necessity for a better understanding of the basic processes that determine the operation of fuel cells became evident during the devel opment of practical units in the last three decades. The search for efficient electrocatalysts in low-temperature fuel cells intensified the general study of the nature and the role of the electrode material. Re search on the complex mechanisms of the anodic oxidation of different fuels and of the reduction of molecular oxygen on solid electrodes was stimulated, and the strong influence of adsorbed species on the electrode reaction in question was investigated. Suitable electrolytes had to be found for the high-temperature fuel cells. The use of electrodes with large internal surface lead to the development of models of porous electrode. structures and to the mathematical analysis of the operation of these models under certain conditions. While the chapters I to III introduce the reader to the general field offuel cells, the progress made in the understanding of the basic problems in the electrochemistry of fuel cells since the end of the second world war is reviewed in chapters IV to XVI of this monograph. In contrast, the technological aspects necessary for the development of practical units are not covered here. The open literature published as books or as papers in scientific journals has been considered up to the time of the writing of the final draft of the specific chapter, at least till the end of 1967.
Download or read book Materials for Fuel Cells written by M Gasik and published by Elsevier. This book was released on 2008-10-27 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fuel cell is an electrochemical device that converts the chemical energy of a reaction (between fuel and oxidant) directly into electricity. Given their efficiency and low emissions, fuel cells provide an important alternative to power produced from fossil fuels. A major challenge in their use is the need for better materials to make fuel cells cost-effective and more durable. This important book reviews developments in materials to fulfil the potential of fuel cells as a major power source. After introductory chapters on the key issues in fuel cell materials research, the book reviews the major types of fuel cell. These include alkaline fuel cells, polymer electrolyte fuel cells, direct methanol fuel cells, phosphoric acid fuel cells, molten carbonate fuel cells, solid oxide fuel cells and regenerative fuel cells. The book concludes with reviews of novel fuel cell materials, ways of analysing performance and issues affecting recyclability and life cycle assessment. With its distinguished editor and international team of contributors, Materials for fuel cells is a valuable reference for all those researching, manufacturing and using fuel cells in such areas as automotive engineering. Examines the key issues in fuel cell materials research Reviews the major types of fuel cells such as direct methanol and regenerative fuel cells Further chapters explore ways of analysing performance and issues affecting recyclability and life cycle assessment
Download or read book Electrochemical Reactors Fundamentals electrolysers batteries and fuel cells written by M. I. Ismail and published by Elsevier Publishing Company. This book was released on 1989 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a guide for professionals interested in energy transfer and electrochemical technology systems. It covers the state-of-the-art of materials, electrochemistry and electrochemical engineering as related to electrochemical reactors, batteries and fuel cells. The fifteen chapters, written by experts in fields related to every aspect affecting reactor performance, are grouped into three parts. The first is devoted to fundamentals of reactors, batteries and fuel cells and covers various aspects of design, parts, construction, materials operation and control systems. The second group is devoted to specific reactors such as aqueous electro-organic and inorganic synthesis, electrochemical polymerization, molten salt electrolysis, electrochemical machining, metal finishing, reactor performance, failure mechanisms, corrosion control, materials selection and techniques. The third group deals with manufacturing techniques and surface treatment of materials for commercial reactors, commercial parts/materials, fastening, assembly and production of reactor parts and mathematical modelling of various reactor processes.
Download or read book Fundamental Understanding of Electrode Processes in Memory of Professor Ernest B Yeager written by Jai Prakash and published by The Electrochemical Society. This book was released on 2005 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sustainable and Green Electrochemical Science and Technology written by Keith Scott and published by John Wiley & Sons. This book was released on 2017-05-16 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable and Green Electrochemical Science and Technology brings together the basic concepts of electrochemical science and engineering and shows how these are applied in an industrial context, emphasising the major role that electrochemistry plays within society and industry in providing cleaner, greener and more sustainable technologies. Electrochemistry has many applications for sustainability; it can be used to store energy, synthesise materials and chemicals, to generate power and to recycle valuable resources. Coverage includes Electrochemistry, Electrocatalysis and Thermodynamics Electrochemical Cells, Materials and Reactors Carbon Dioxide Reduction and Electro-Organic Synthesis Hydrogen production and Water Electrolysis Inorganic Synthesis Electrochemical Energy Storage and Power Sources Electrochemical processes for recycling and resource recovery Fuel Cell Technologies This book is targeted at both industrial and academic readers, providing a good technological reference base for electrochemistry. It will enable the reader to build on basic principles of electrochemistry, and takes these through to cell design for various and diverse applications.
Download or read book Fuel Cells and Hydrogen Production written by Timothy E. Lipman and published by Springer. This book was released on 2018-10-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The expected end of the “oil age” will lead to increasing focus and reliance on alternative energy conversion devices, among which fuel cells have the potential to play an important role. Not only can phosphoric acid and solid oxide fuel cells already efficiently convert today’s fossil fuels, including methane, into electricity, but other types of fuel cells, such as polymer electrolyte membrane fuel cells, have the potential to become the cornerstones of a possible future hydrogen economy. This handbook offers concise yet comprehensive coverage of the current state of fuel cell research and identifies key areas for future investigation. Internationally renowned specialists provide authoritative introductions to a wide variety of fuel cell types and hydrogen production technologies, and discuss materials and components for these systems. Sustainability and marketing considerations are also covered, including comparisons of fuel cells with alternative technologies.
Download or read book Analytical Modelling of Fuel Cells written by Andrei A. Kulikovsky and published by Elsevier. This book was released on 2010-06-29 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: In fuel cell research, the gap between fundamental electrochemical processes and the engineering of fuel cell systems is bridged by the physical modelling of fuel cells. This relatively new discipline aims to understand the basic transport and kinetic phenomena in a real cell and stack environment, paving the way for improved design and performance. The author brings his unique approach to the analytical modeling of fuel cells to this essential reference for energy technologists. Covers recent advances and analytical solutions to a range of problems faced by energy technologists, from catalyst layer performance to thermal stability Provides detailed graphs, charts and other tools (glossary, index) to maximize R&D output while minimizing costs and time spent on dead-end research Presents Kulikovsky’s signature approach (and the data to support it)—which uses "simplified" models based on idealized systems, basic geometries, and minimal assumptions—enabling qualitative understanding of the causes and effects of phenomena
Download or read book Fuel Cells written by Vladimir S. Bagotsky and published by John Wiley & Sons. This book was released on 2012-02-08 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: The comprehensive, accessible introduction to fuel cells, their applications, and the challenges they pose Fuel cells electrochemical energy devices that produce electricity and heat present a significant opportunity for cleaner, easier, and more practical energy. However, the excitement over fuel cells within the research community has led to such rapid innovation and development that it can be difficult for those not intimately familiar with the science involved to figure out exactly how this new technology can be used. Fuel Cells: Problems and Solutions, Second Edition addresses this issue head on, presenting the most important information about these remarkable power sources in an easy-to-understand way. Comprising four important sections, the book explores: The fundamentals of fuel cells, how they work, their history, and much more The major types of fuel cells, including proton exchange membrane fuel cells (PEMFC), direct liquid fuel cells (DLFC), and many others The scientific and engineering problems related to fuel cell technology The commercialization of fuel cells, including a look at their uses around the world Now in its second edition, this book features fully revised coverage of the modeling of fuel cells and small fuel cells for portable devices, and all-new chapters on the structural and wetting properties of fuel cell components, experimental methods for fuel cell stacks, and nonconventional design principles for fuel cells, bringing the content fully up to date. Designed for advanced undergraduate and graduate students in engineering and chemistry programs, as well as professionals working in related fields, Fuel Cells is a compact and accessible introduction to the exciting world of fuel cells and why they matter.
Download or read book Innovations in Fuel Cell Technologies written by Robert Steinberger-Wilckens and published by Royal Society of Chemistry. This book was released on 2010 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the state-of-the-art in fuel cells (low and high temperature) across all the types applied in the field today and assesses current trends in development.
Download or read book Fuel Cells Technologies for Fuel Processing written by Dushyant Shekhawat and published by Elsevier. This book was released on 2011-03-18 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Cells: Technologies for Fuel Processing provides an overview of the most important aspects of fuel reforming to the generally interested reader, researcher, technologist, teacher, student, or engineer. The topics covered include all aspects of fuel reforming: fundamental chemistry, different modes of reforming, catalysts, catalyst deactivation, fuel desulfurization, reaction engineering, novel reforming concepts, thermodynamics, heat and mass transfer issues, system design, and recent research and development. While no attempt is made to describe the fuel cell itself, there is sufficient description of the fuel cell to show how it affects the fuel reformer. By focusing on the fundamentals, this book aims to be a source of information now and in the future. By avoiding time-sensitive information/analysis (e.g., economics) it serves as a single source of information for scientists and engineers in fuel processing technology. The material is presented in such a way that this book will serve as a reference for graduate level courses, fuel cell developers, and fuel cell researchers. Chapters written by experts in each area Extensive bibliography supporting each chapter Detailed index Up-to-date diagrams and full colour illustrations
