Download or read book Advanced Techniques for Testing of Cement Based Materials written by Marijana Serdar and published by Springer Nature. This book was released on 2020-02-18 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book examines advanced, non-standardized techniques that have been developed for determining different properties of cement paste, mortar and concrete, and provides state-of-the-art information on methods for monitoring hydration-induced changes in cement-based materials (CBMs). These methods are often nondestructive and allow quasi-continuous monitoring covering the time span from placement of the material to formation of a fully hardened cement composite. The book also presents various applications of acoustic emission for characterizing fresh concrete, recent developments in ultrasonic methods for characterizing CBMs since placement, application of ambient response methods for measuring elastic modulus, methods for determining deformational characteristics of CBMs since setting and methods for in situ measurements of stresses in concrete elements during hardening.

Download or read book Report 31 Advanced Testing of Cement Based Materials during Setting and Hardening Report of RILEM Technical Committee 185 ATC written by Hans W. Reinhardt and published by RILEM Publications. This book was released on 2005 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Performance of Cement Based Materials in Aggressive Aqueous Environments written by Mark Alexander and published by Springer Science & Business Media. This book was released on 2012-12-18 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete and cement-based materials must operate in increasingly aggressive aqueous environments, which may be either natural or industrial. These materials may suffer degradation in which ion addition and/or ion exchange reactions occur, leading to a breakdown of the matrix microstructure and consequent weakening. Sometimes this degradation can be extremely rapid and serious such as in acidic environments, while in other cases degradation occurs over long periods. Consequences of material failure are usually severe – adversely affecting the health and well-being of human communities and disturbing ecological balances. There are also large direct costs of maintaining and replacing deteriorated infrastructure and indirect costs from loss of production during maintenance work, which place a great burden on society. The focus of this book is on addressing issues concerning performance of cement-based materials in aggressive aqueous environments , by way of this State-of-the-Art Report. The book represents the work of many well-known and respected authors who contributed chapters or parts of chapters. Four main themes were addressed: I. Nature and kinetics of degradation and deterioration mechanisms of cement-based materials in aggressive aqueous environments, II. Modelling of deterioration in such environments, III. Test methods to assess performance of cement-based materials in such environments, and which can be used to characterise and rate relative performance and inform long term predictions, IV. Engineering implications and consequences of deterioration in aggressive aqueous environments, and engineering approaches to the problem.

Download or read book Smart Nanoconcretes and Cement Based Materials written by Mohd Shahir Liew and published by Elsevier. This book was released on 2019-11-16 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Nanoconcretes and Cement-Based Materials: Properties, Modelling and Applications explores the fundamental concepts and applications of smart nanoconcretes with self-healing, self-cleaning, photocatalytic, antibacterial, piezoelectrical, heating and conducting properties and how they are used in modern high-rise buildings, hydraulic engineering, highways, tunnels and bridges. This book is an important reference source for materials scientists and civil engineers who are looking to enhance the properties of smart nanomaterials to create stronger, more durable concrete. - Explores the mechanisms through which active agents are released from nanocontainers inside concrete - Shows how embedded smart nanosensors, including carbon cement-based smart sensors and micro/nano strain-sensors, are used to increase concrete performance - Discusses the major challenges of integrating smart nanomaterials into concrete composites

Download or read book Multifunctional Cement Based Materials written by Deborah D. L. Chung and published by CRC Press. This book was released on 2018-10-08 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unique in its focus on functional properties, this book examines the resistive, piezoresistive, thermoelectric, and electromagnetic behavior of multifunctional cement-based materials for reduced cost, improved durability and maintenance, and optimization of various structural designs. The author analyzes cement-based compounds for enhancing a wide-range of structures, including buildings, bridges, highways, automobiles, and aircrafts, exploring characteristics such as vibration damping, strain sensing, electromagnetic and magnetic shielding, electrical conductivity, and thermal insulation for improved structure stability and performance.

Download or read book Transport and Interactions of Chlorides in Cement based Materials written by Caijun Shi and published by CRC Press. This book was released on 2019-07-26 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chloride-induced corrosion is the most important durability issue of reinforced concrete structures, and the prediction and prevention of chloride-induced corrosion has attracted considerable interest all over the world. Given that chloride penetrates through the concrete cover, the issues concerning its transport are crucial. These include testing methods, prediction, and the prevention of ingress. During the transport process, physical and chemical interaction occurs between chloride and cement hydrates, which in turn affects the further transport, so the transport of chloride and these interactions are closely related and underpin our understanding of chloride-induced corrosion in RC structures. This book provides in-depth discussion of chloride transport and its interaction in cement-based materials, and reviews and summarizes the state of the art. The mechanisms and testing methods for chloride transport, chemical interactions of chloride with cement hydrates, chloride binding isotherms, measurement of penetration depths, factors affecting chloride transport, and modeling of chloride transport are discussed in detail. This book serves as a reference for researchers or engineer, and a textbook for graduate students.

Download or read book PRO 38 3rd International RILEM Workshop on Testing and Modelling the Chloride Ingress into Concrete written by Carmen Andrade and published by RILEM Publications. This book was released on 2004 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Integrated Design and Environmental Issues in Concrete Technology written by K. Sakai and published by CRC Press. This book was released on 2014-04-21 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two themes of integration of structural and durability design, and integration of concrete technologies in relation to global environmental issues are drawn together in this book. It presents the views of distinguished international researchers and engineers on these key topics as the 21st century approaches.

Download or read book Non destructive Testing and Evaluation of Civil Engineering Structures written by Jean-Paul Balayssac and published by Elsevier. This book was released on 2017-11-22 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: The non-destructive evaluation of civil engineering structures in reinforced concrete is becoming an increasingly important issue in this field of engineering. This book proposes innovative ways to deal with this problem, through the characterization of concrete durability indicators by the use of non-destructive techniques. It presents the description of the various non-destructive techniques and their combination for the evaluation of indicators. The processing of data issued from the combination of NDE methods is also illustrated through examples of data fusion methods. The identification of conversion models linking observables, obtained from non-destructive measurements, to concrete durability indicators, as well as the consideration of different sources of variability in the assessment process, are also described. An analysis of in situ applications is carried out in order to highlight the practical aspects of the methodology. At the end of the book the authors provide a methodological guide detailing the proposed non-destructive evaluation methodology of concrete indicators. - Presents the latest developments performed in the community of NDT on different aspects - Provides a methodology developed in laboratory and transferred onsite for the evaluation of concrete properties which are not usually addressed by NDT methods - Includes the use of data fusion for merging the measurements provided by several NDT methods - Includes examples of current and potential applications

Download or read book Structural Renovation in Concrete written by Zongjin Li and published by CRC Press. This book was released on 2009-02-03 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mechanisms by which buildings and infrastructures degrade are complex, as are the procedures and methods for inspection and for rehabilitation. This book examines the various problems caused by non-uniform deformation changes, poor durability, and natural and human disasters such as earthquakes and fire. Attention is given to the causes and mechanisms of the deterioration. General procedures and commonly used techniques for inspection and evaluation of existing infrastructures are introduced. The desk study, destructive test, and non-destructive test are discussed – in particular the newly developed non-destructive methods for deterioration monitoring. The book then moves on to conventional renovation techniques such as patch and steel plate strengthening, which meet the requirements of normal practice. Special attention is paid to compatibility between repair materials and degraded materials. Fibrous composite materials are then introduced as a basis for innovative repair techniques, and different fibre and matrix properties are outlined, as are newly developed inorganic binders as a matrix for fibrous composites. Finally, advanced rehabilitation techniques using fibrous composite are described. Fundamental issues such as bonding and failure mechanisms are then discussed in detail. Fibrous composite strengthening techniques for beam, wall, column and slabs are covered, including shear strengthening, flexural strengthening, and fillet winding, as are codes of practice for retrofitting with fibrous composites. This caters to students and academics world-wide and serves as a "tool book" for concrete and structural engineering professionals.

Download or read book Rheology of Fresh Cement Based Materials written by Qiang Yuan and published by CRC Press. This book was released on 2022-12-28 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces fundamentals, measurements, and applications of rheology of fresh cement-based materials. The rheology of a fresh cement-based material is one of its most important aspects, characterizing its flow and deformation, and governing the mixing, placement, and casting quality of a concrete. This is the first book to bring the field together on an increasingly important topic, as new types of cement-based materials and new concrete technologies are developed. It describes measurement equipment, procedures, and data interpretation of the rheology of cement paste and concrete, as well as applications such as self-compacting concrete, pumping, and 3D printing. A range of other cement-based materials such as fiber-reinforced concrete, cemented paste backfills, and alkali-activated cement are also examined. Rheology of Fresh Cement-Based Materials serves as a reference book for researchers and engineers, and a textbook for advanced undergraduate and graduate students.

Download or read book Mechanisms of Chemical Degradation of Cement based Systems written by K.L. Scrivener and published by CRC Press. This book was released on 1997-04-17 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deterioration of cement-based materials is a continuing problem, as it results in the substantial shortening of the lives of conventional concrete structures. The main costs result from poor performance and the need for early repair. With more advanced applications, where very long service lives are essential, such as the storage of nuclear waste, an understanding of the degradation processes in order to predict long term performance is very important. this book forms the proceedings of the latest Symposia at the Materials Research Society Autumn meeting in Boston.

Download or read book Nanotechnology in Cement Based Construction written by Antonella D'Alessandro and published by CRC Press. This book was released on 2020-01-22 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many books on new smart materials are available, but specialized analysis of particular topics is still in high demand. This multiauthor book focuses on applying nanotechnology to cement-based materials to make numerous engineering applications possible. The addition of novel smart nanofillers allows the development of multifunctional composite materials, not just limited to improving mechanical strength, but also including several enhanced features. Special attention is devoted to types of nano-inclusions, novel techniques to mix components, and analysis of properties that can be achieved by paste, mortar, or concrete if added with nanofillers. Among these properties, the capability of self-sensing is very promising. Moreover, the use of phase-changing materials improves the energy efficiency of nanocomposites, resulting in important applications in engineering. Particular attention is also focused on energy harvesting and electromagnetic shielding properties. Comprehensive and up to date, this is an important reference book that not only provides in-depth information about recent developments and perspectives in this field but also discusses topics that promise major developments in the near future.

Download or read book Microwave Absorbing Materials written by Yuping Duan and published by CRC Press. This book was released on 2016-10-14 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the phenomenal development of electromagnetic wave communication devices and stealth technology, electromagnetic wave absorbing materials have been attracting attention as antielectromagnetic interference slabs, stealth materials, self-concealing technology, and microwave darkrooms. This book starts with the fundamental theory of electromagnetic wave absorption in loss medium space, followed by a discussion of different microwave absorbents, such as manganese dioxide, iron-based composite powder, conductive polyaniline, barium titanate powder, and manganese nitride. Then, structural absorbing materials are explored, including multilayer materials, new discrete absorbers, microwave absorption coatings, cement-based materials, and structural pyramid materials. Many of the graphics demonstrate not only the principles of physics and experimental results but also the methodology of computing. The book will be useful for graduate students of materials science and engineering, physics, chemistry, and electrical and electronic engineering; researchers in the fields of electromagnetic functional materials and nanoscience; and engineers in the fields of electromagnetic compatibility and stealth design.

Download or read book Materials Challenges and Testing for Supply of Energy and Resources written by Thomas Böllinghaus and published by Springer Science & Business Media. This book was released on 2012-01-10 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: One major goal of the World Materials Research Institute Forum - WMRIF is to promote young scientists in the field of materials science and engineering. To enhance the international knowledge exchange between young postdoctoral scientists all over the world, WMRIF meanwhile regularly organizes joint workshops among the member institutes. These workshops also represent an increasingly appreciated platform to get known to each other and to build co-operations. For such workshops, various topics are selected, pointing to future perspectives and challenges in the field of Materials Science and Engineering. This time, the presentations of the workshop focused on the four subjects Challenges in conclusive, realistic and system oriented materials testing Materials challenges for water supply Materials challenges in the extraction and recovery of scarce elements and minerals Materials challenges for nuclear fission and fusion. This book comprises the peer-reviewed contributions during the 2nd International Workshop for Young Materials Scientists at BAM Federal Institute for Materials Research and Testing, Berlin, Germany. It also provides a very informative overview of recent results for all materials scientists.

Download or read book Smart Sustainable Infrastructure Building a Greener Tomorrow written by Nemkumar Banthia and published by Springer Nature. This book was released on with total page 1210 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book PRO 32 International Conference on Advances in Concrete and Structures ICACS 2003 Volume 2 written by Ying-shu Yuan and published by RILEM Publications. This book was released on 2003 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: