Download or read book Elastic Multibody Dynamics written by Hartmut Bremer and published by Springer Science & Business Media. This book was released on 2008-06-19 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1. Background This textbook is an introduction to and exploration of a number of core topics in the ?eld of applied mechanics. Mechanics, in both its theoretical and applied contexts, is, like all scienti?c endeavors, a human construct. It re?ects the personalities, thoughts, errors, and successes of its creators. We therefore provide some personal information about each of these individuals when their names arise for the ?rst time in this book. This should enable the reader to piece together a cultural-historical picture of the ?eld s origins and development. This does not mean that we are writing history. Nevertheless, some remarks putting individuals and ideas in context are necessary in order to make clear what we are speaking about – and what we are not speaking about. At the end of the 19th century, technical universities were established eve- where in Europe in an almost euphoric manner. But the practice of technical mechanics itself, as one of the basics of technical development, was in a desolate state, due largely to the refusal of its practitioners to recognize the in?uence of kinetics on motion. They were correct to the extend that then current mechanical systems moved with small velocities where kinetics does not play a signi?cant role. But they had failed to keep up with developments in the science underlying their craft and were unable to keep pace with the speeds of such systems as the steam engine.
Download or read book Flexible Multibody Dynamics written by O. A. Bauchau and published by Springer Science & Business Media. This book was released on 2010-10-23 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author developed this text over many years, teaching graduate courses in advanced dynamics and flexible multibody dynamics at the Daniel Guggenheim School of Aerospace Engineering of the Georgia Institute of Technology. The book presents a unified treatment of rigid body dynamics, analytical dynamics, constrained dynamics, and flexible multibody dynamics. A comprehensive review of numerical tools used to enforce both holonomic and nonholonomic constraints is presented. Advanced topics such as Maggi’s, index-1, null space, and Udwadia and Kalaba’s formulations are presented because of their fundamental importance in multibody dynamics. Methodologies for the parameterization of rotation and motion are discussed and contrasted. Geometrically exact beams and shells formulations, which have become the standard in flexible multibody dynamics, are presented and numerical aspects of their finite element implementation detailed. Methodologies for the direct solution of the index-3 differential-algebraic equations characteristic of constrained multibody systems are presented. It is shown that with the help of proper scaling procedures, such equations are not more difficult to integrate than ordinary differential equations. This book is illustrated with numerous examples and should prove valuable to both students and researchers in the fields of rigid and flexible multibody dynamics.
Download or read book Modeling Analysis and Control of Dynamic Elastic Multi Link Structures written by J.E. Lagnese and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this monograph is threefold. First, mathematical models of the transient behavior of some or all of the state variables describing the motion of multiple-link flexible structures will be developed. The structures which we have in mind consist of finitely many interconnected flexible ele ments such as strings, beams, plates and shells or combinations thereof and are representative of trusses, frames, robot arms, solar panels, antennae, deformable mirrors, etc. , currently in use. For example, a typical subsys tem found in almost all aircraft and space vehicles consists of beam, plate and/or shell elements attached to each other in a rigid or flexible manner. Due to limitations on their weights, the elements themselves must be highly flexible, and due to limitations on their initial configuration (i. e. , before de ployment), those aggregates often have to contain several links so that the substructure may be unfolded or telescoped once it is deployed. The point of view we wish to adopt is that in order to understand completely the dynamic response of a complex elastic structure it is not sufficient to con to take into account the sider only its global motion but also necessary flexibility of individual elements and the interaction and transmission of elastic effects such as bending, torsion and axial deformations at junctions where members are connected to each other. The second object of this book is to provide rigorous mathematical analyses of the resulting models.
Download or read book Fundamentals of Multibody Dynamics written by Farid Amirouche and published by Springer Science & Business Media. This book was released on 2007-05-24 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook – a result of the author’s many years of research and teaching – brings together diverse concepts of the versatile tool of multibody dynamics, combining the efforts of many researchers in the field of mechanics.
Download or read book Flexible Multibody Dynamics written by Arun K. Banerjee and published by John Wiley & Sons. This book was released on 2016-03-23 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Arun K. Banerjee is one of the foremost experts in the world on the subject of flexible multibody dynamics. This book describes how to build mathermatical models of multibody systems with elastic components. Examples of such systems include the human body itself, construction cranes, cares with trailers, helicopers, spacecraft deploying antennas, tethered satellites, and underwater maneuvering vehicles. This book provides methods of analysis of complex mechanical systems that can be simulated in less computer time than other methods. It equips the reader with knowledge of algorithms that provide accurate results in reduced simulation time.
Download or read book Multibody Dynamics 2019 written by Andrés Kecskeméthy and published by Springer. This book was released on 2019-06-28 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this work, outstanding, recent developments in various disciplines, such as structural dynamics, multiphysic mechanics, computational mathematics, control theory, biomechanics, and computer science, are merged together in order to provide academicians and professionals with methods and tools for the virtual prototyping of complex mechanical systems. Each chapter of the work represents an important contribution to multibody dynamics, a discipline that plays a central role in the modelling, analysis, simulation and optimization of mechanical systems in a variety of fields and for a wide range of applications.
Download or read book Advanced Multibody System Dynamics written by Werner Schiehlen and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: The German Research Council (DFG) decided 1987 to establish a nationwide five year research project devoted to dynamics of multibody systems. In this project universities and research centers cooperated with the goal to develop a general pur pose multibody system software package. This concept provides the opportunity to use a modular structure of the software, i.e. different multibody formalisms may be combined with different simulation programmes via standardized interfaces. For the DFG project the database RSYST was chosen using standard FORTRAN 77 and an object oriented multibody system datamodel was defined. The project included • research on the fundamentals of the method of multibody systems, • concepts for new formalisms of dynamical analysis, • development of efficient numerical algorithms and • realization of a powerful software package of multibody systems. These goals required an interdisciplinary cooperation between mathematics, compu ter science, mechanics, and control theory. ix X After a rigorous reviewing process the following research institutions participated in the project (under the responsibility of leading scientists): Technical University of Aachen (Prof. G. Sedlacek) Technical University of Darmstadt (Prof. P. Hagedorn) University of Duisburg M. Hiller) (Prof.
Download or read book Multibody System Dynamics Robotics and Control written by Hubert Gattringer and published by Springer Science & Business Media. This book was released on 2013-01-06 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume contains 19 contributions by international experts in the field of multibody system dynamics, robotics and control. The book aims to bridge the gap between the modeling of mechanical systems by means of multibody dynamics formulations and robotics. In the classical approach, a multibody dynamics model contains a very high level of detail, however, the application of such models to robotics or control is usually limited. The papers aim to connect the different scientific communities in multibody dynamics, robotics and control. Main topics are flexible multibody systems, humanoid robots, elastic robots, nonlinear control, optimal path planning, and identification.
Download or read book Contact Force Models for Multibody Dynamics written by Paulo Flores and published by Springer. This book was released on 2016-03-15 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book analyzes several compliant contact force models within the context of multibody dynamics, while also revisiting the main issues associated with fundamental contact mechanics. In particular, it presents various contact force models, from linear to nonlinear, from purely elastic to dissipative, and describes their parameters. Addressing the different numerical methods and algorithms for contact problems in multibody systems, the book describes the gross motion of multibody systems by using a two-dimensional formulation based on the absolute coordinates and employs different contact models to represent contact-impact events. Results for selected planar multibody mechanical systems are presented and utilized to discuss the main assumptions and procedures adopted throughout this work. The material provided here indicates that the prediction of the dynamic behavior of mechanical systems involving contact-impact strongly depends on the choice of contact force model. In short, the book provides a comprehensive resource for the multibody dynamics community and beyond on modeling contact forces and the dynamics of mechanical systems undergoing contact-impact events.
Download or read book Dynamics of Multibody Systems written by Ahmed A. Shabana and published by Cambridge University Press. This book was released on 2013-09-02 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This enhanced fourth edition of Dynamics of Multibody Systems includes an additional chapter that provides explanations of some of the fundamental issues addressed in the book, as well as new detailed derivations of some important problems. Many common mechanisms such as automobiles, space structures, robots and micromachines have mechanical and structural systems that consist of interconnected rigid and deformable components. The dynamics of these large-scale multibody systems are highly nonlinear, presenting complex problems that in most cases can only be solved with computer-based techniques. The book begins with a review of the basic ideas of kinematics and the dynamics of rigid and deformable bodies before moving on to more advanced topics and computer implementation. The book's wealth of examples and practical applications will be useful to graduate students, researchers and practising engineers working on a wide variety of flexible multibody systems.
Download or read book Modern Flexible Multi Body Dynamics Modeling Methodology for Flapping Wing Vehicles written by Cornelia Altenbuchner and published by Academic Press. This book was released on 2017-09-15 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Flexible Multi-Body Dynamics Modeling Methodology for Flapping Wing Vehicles presents research on the implementation of a flexible multi-body dynamic representation of a flapping wing ornithopter that considers aero-elasticity. This effort brings advances in the understanding of flapping wing flight physics and dynamics that ultimately leads to an improvement in the performance of such flight vehicles, thus reaching their high performance potential. In using this model, it is necessary to reduce body accelerations and forces of an ornithopter vehicle, as well as to improve the aerodynamic performance and enhance flight kinematics and forces which are the design optimization objectives. This book is a useful reference for postgraduates in mechanical engineering and related areas, as well as researchers in the field of multibody dynamics. Uses Lagrange equations of motion in terms of a generalized coordinate vector of the rigid and flexible bodies in order to model the flexible multi-body system Provides flight verification data and flight physics of highly flexible ornithoptic vehicles Includes an online companion site with files/codes used in application examples
Download or read book THE DYNAMICAL MODELLING OF ELASTIC MULTIBODY SYSTEMS written by SHUI-LIN WENG and published by . This book was released on 1991 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: forces. These equations are derived systematically.
Download or read book Multibody Dynamics written by Krzysztof Arczewski and published by Springer Science & Business Media. This book was released on 2010-11-08 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ECCOMAS Thematic Conference “Multibody Dynamics 2009” was held in Warsaw, representing the fourth edition of a series which began in Lisbon (2003), and was then continued in Madrid (2005) and Milan (2007), held under the auspices of the European Community on Computational Methods in Applied Sciences (ECCOMAS). The conference provided a forum for exchanging ideas and results of several topics related to computational methods and applications in multibody dynamics, through the participation of 219 scientists from 27 countries, mostly from Europe but also from America and Asia. This book contains the revised and extended versions of invited conference papers, reporting on the state-of-the-art in the advances of computational multibody models, from the theoretical developments to practical engineering applications. By providing a helpful overview of the most active areas and the recent efforts of many prominent research groups in the field of multibody dynamics, this book can be highly valuable for both experienced researches who want to keep updated with the latest developments in this field and researches approaching the field for the first time.
Download or read book Computational Flexible Multibody Dynamics written by Bernd Simeon and published by Springer Science & Business Media. This book was released on 2013-06-14 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph, written from a numerical analysis perspective, aims to provide a comprehensive treatment of both the mathematical framework and the numerical methods for flexible multibody dynamics. Not only is this field permanently and rapidly growing, with various applications in aerospace engineering, biomechanics, robotics, and vehicle analysis, its foundations can also be built on reasonably established mathematical models. Regarding actual computations, great strides have been made over the last two decades, as sophisticated software packages are now capable of simulating highly complex structures with rigid and deformable components. The approach used in this book should benefit graduate students and scientists working in computational mechanics and related disciplines as well as those interested in time-dependent partial differential equations and heterogeneous problems with multiple time scales. Additionally, a number of open issues at the frontiers of research are addressed by taking a differential-algebraic approach and extending it to the notion of transient saddle point problems.
Download or read book Multibody Dynamics with Unilateral Contacts written by Friedrich Pfeiffer and published by Springer Science & Business Media. This book was released on 2000-11-10 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume introduces basic concepts necessary for a modern treatment of inequality problems in finite degree of freedom dynamics. Tools from convex analysis, by now well established in non-smooth mechanics, are used to formulate the constitutive equations and impact laws. The lectures cover a broad area of non-smooth dynamics from primal and dual energy functions in variational and differential form to application problems as chimney dampers or vibration conveyors. This includes frictional oscillations with bifurcation scenarios as well as analogies to small displacement quasi-static problems. The course is on an advanced level, designed primarily for postgraduate students, but should also be of value for scientists working on dynamic complementarity problems.
Download or read book Multibody Dynamics written by Jean-Claude Samin and published by Springer Science & Business Media. This book was released on 2012-10-17 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides the international multibody dynamics community with an up-to-date view on the state of the art in this rapidly growing field of research which now plays a central role in the modeling, analysis, simulation and optimization of mechanical systems in a variety of fields and for a wide range of industrial applications. This book contains selected contributions delivered at the ECCOMAS Thematic Conference on Multibody Dynamics, which was held in Brussels, Belgium and organized by the Université catholique de Louvain, from 4th to 7th July 2011. Each paper reflects the State-of-Art in the application of Multibody Dynamics to different areas of engineering. They are enlarged and revised versions of the communications, which were enhanced in terms of self-containment and tutorial quality by the authors. The result is a comprehensive text that constitutes a valuable reference for researchers and design engineers which helps to appraise the potential for the application of multibody dynamics methodologies to a wide range of areas of scientific and engineering relevance.
Download or read book Dynamics and Control of Multibody Systems written by Perinkulam Sambamurthy Krishnaprasad and published by American Mathematical Soc.. This book was released on 1989 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of complex, interconnected mechanical systems with rigid and flexible articulated components is of growing interest to both engineers and mathematicians. Recent work in this area reveals a rich geometry underlying the mathematical models used in this context. In particular, Lie groups of symmetries, reduction, and Poisson structures play a significant role in explicating the qualitative properties of multibody systems. In engineering applications, it is important to exploit the special structures of mechanical systems. For example, certain mechanical problems involving control of interconnected rigid bodies can be formulated as Lie-Poisson systems. The dynamics and control of robotic, aeronautic, and space structures involve difficulties in modeling, mathematical analysis, and numerical implementation. For example, a new generation of spacecraft with large, flexible components are presenting new challenges to the accurate modeling and prediction of the dynamic behavior of such structures. Recent developments in Hamiltonian dynamics and coupling of systems with symmetries has shed new light on some of these issues, while engineering questions have suggested new mathematical structures. These kinds of considerations motivated the organization of the AMS-IMS-SIAM Joint Summer Research Conference on Control Theory and Multibody Systems, held at Bowdoin College in August, 1988. This volume contains the proceedings of that conference. The papers presented here cover a range of topics, all of which could be viewed as applications of geometrical methods to problems arising in dynamics and control. The volume contains contributions from some of the top researchers and provides an excellent overview of the frontiers of research in this burgeoning area.
