Download or read book Earthquake Resistant Design Concepts an Introduction to the NEHRP Recommended Seismic Provisions for New Buildings and Other Structures FEMA P 749 December 2010 written by Federal Emergency Management Agency and published by Createspace Independent Pub. This book was released on 2013-01-25 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Of the 500,000 or so detectable earthquakes that occur on Planet Earth each year, people will “feel” about 100,000 of them and about 100 will cause damage. Although most earthquakes are moderate in size and destructive potential, a severe earthquake occasionally strikes a community that is not adequately prepared and thousands of lives and billions of dollars in economic investment are lost. For example, a great earthquake and the fires it initiated destroyed much of San Francisco in 1906 and a significant portion of Anchorage, Alaska, was destroyed by a large earthquake in 1964. Within the past 200 years, major destructive earthquakes also occurred in Charleston, South Carolina, and Memphis, Tennessee. Within the past 50 years, smaller but damaging earthquakes occurred several times in both Los Angeles and Seattle. Overall, more than 20 states have a moderate or high risk of experiencing damaging earthquakes. Earthquakes are truly a national problem. One of the key ways a community protects itself from potential earthquake disasters is by adopting and enforcing a building code with appropriate seismic design and construction standards. The seismic requirements in U.S. model building codes and standards are updated through the volunteer efforts of design professionals and construction industry representatives under a process sponsored by the Federal Emergency Management Agency (FEMA) and administered by the Building Seismic Safety Council (BSSC). At regular intervals, the BSSC develops and FEMA publishes the NEHRP (National Earthquake Hazards Reduction Program) Recommended Seismic Provisions for New Buildings and Other Structures (referred to in this publication as the NEHRP Recommended Seismic Provisions or simply the Provisions). The Provisions serves as a resource used by the codes and standards development organizations as they formulate sound seismic-resistant design and construction requirements. The Provisions also provides design professionals, building officials, and educators with in-depth commentary on the intent and preferred application of the seismic regulations. The 2009 edition of the Provisions (FEMA P-750) and the building codes and consensus standards based on its recommendations are, of necessity, highly technical documents intended primarily for use by design professionals and others who have specialized technical training. This introduction to the NEHRP Recommended Seismic Provisions is intended to provide these interested individuals with a readily understandable explanation of the intent of the earthquake-resistant design and requirements of the Provisions. Chapter 1 explains the history and purpose of building regulation in the United States, including the process used to develop and adopt the nation's building codes and the seismic requirements in these codes. Chapter 2 is an overview of the performance intent of the Provisions. Among the topics addressed are the national seismic hazard maps developed by the U.S. Geological Survey (USGS); the seismic design maps adopted by the Provisions as a basis for seismic design; and seismic risk, which is a function of both the probability that a community will experience intense earthquake ground shaking and the probability that building construction will suffer significant damage because of this ground motion. Chapter 3 identifies the design and construction features of buildings and other structures that are important to good seismic performance. Chapter 4 describes the various types of structures and nonstructural components addressed by the Provisions. Chapter 5 is an overview of the design procedures contained in the Provisions. Chapter 6 addresses how the practice of earthquake-resistant design is likely to evolve in the future. A glossary of key technical terms, lists of notations and acronyms used in this report, and a selected bibliography identifying references that may be of interest to some readers complete this report.

Download or read book Earthquake resistant Design Concepts written by United States. Federal Emergency Management Agency and published by . This book was released on 2010 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the key ways a community protects itself from potential earthquake disasters is by adopting and enforcing a building code with appropriate seismic design and construction standards. The seismic requirements in U.S. model building codes and standards are updated through the volunteer efforts of design professionals and construction industry representatives under a process sponsored by the Federal Emergency Management Agency (FEMA) and administered by the Building Seismic Safety Council (BSSC). At regular intervals, the BSSC develops and FEMA publishes the NEHRP (National Earthquake Hazards Reduction Program) Recommended Seismic Provisions for New Buildings and Other Structures (referred to in this publication as the NEHRP Recommended Seismic Provisions or simply the Provisions). The Provisions serves as a resource used by the codes and standards development organizations as they formulate sound seismic-resistant design and construction requirements. The Provisions also provides design professionals, building officials, and educators with in-depth commentary on the intent and preferred application of the seismic regulations. The 2009 edition of the Provisions (FEMA P-750) and the building codes and consensus standards based on its recommendations are, of necessity, highly technical documents intended primarily for use by design professionals and others who have specialized technical training. Because of this technical focus, these documents are not clearly understandable to those not involved in design and construction. Nevertheless, understanding the basis for the seismic regulations contained in the nation's building codes and standards is important to many people outside this technical community including elected officials, decision-makers in the insurance and financial communities, and individual business owners and other citizens. This introduction to the NEHRP Recommended Seismic Provisions is intended to provide these interested individuals with a readily understandable explanation of the intent of the earthquake-resistant design and requirements of the Provisions.

Download or read book Earthquake Resistant Design of Buildings written by Muhammad Hadi and published by CRC Press. This book was released on 2017-10-06 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing important concepts in the study of earthquakes related to retrofitting of structures to be made earthquake resistant. The book investigates the pounding effects on base-isolated buildings, the soil-structure-interaction effects on adjacent buildings due to the impact, the seismic protection of adjacent buildings and the mitigation of earthquakeinduced vibrations of two adjacent structures. These concepts call for a new understanding of controlled systems with passive-active dampers and semi-active dampers. The passive control strategy of coupled buildings is investigated for seismic protection in comparison to active and semi-active control strategies.

Download or read book Earthquake resistant design concepts written by and published by . This book was released on 2010 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design Concepts for Seismic Resistant Buildings written by Buntara Sthenly Gan and published by Cambridge Scholars Publishing. This book was released on 2022-12-13 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book proposes a quantitative shaking evaluation for seismic-resistant buildings. In modern seismic-resistant building design codes, a building structure subjected to a strong earthquake can experience considerably large deformations without collapsing. This book features useful guidance to calculate the shaking quantity scale in detail. It also demonstrates the application of Artificial Intelligence (namely the Deep Neural Network) to predict the shaking quantity scale, which is highly important for early warning system applications for earthquakes.

Download or read book Earthquake Resistant Design of Structures written by Shashikant K. Duggal and published by OUP India. This book was released on 2013-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake-resistant Design of Structures 2e is designed for undergraduate students of civil engineering.

Download or read book EARTHQUAKE RESISTANT DESIGN OF STRUCTURES written by PANKAJ AGRAWAL and published by PHI Learning Pvt. Ltd.. This book was released on 2006-01-01 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive and well-organized book presents the concepts and principles of earthquake resistant design of structures in an easy-to-read style. The use of these principles helps in the implementation of seismic design practice. The book adopts a step-by-step approach, starting from the fundamentals of structural dynamics to application of seismic codes in analysis and design of structures. The text also focusses on seismic evaluation and retrofitting of reinforced concrete and masonry buildings. The text has been enriched with a large number of diagrams and solved problems to reinforce the understanding of the concepts. Intended mainly as a text for undergraduate and postgraduate students of civil engineering, this text would also be of considerable benefit to practising engineers, architects, field engineers and teachers in the field of earthquake resistant design of structures.

Download or read book Earthquake Resistant Design of Buildings written by Muhammad Hadi and published by CRC Press. This book was released on 2017-10-06 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing important concepts in the study of earthquakes related to retrofitting of structures to be made earthquake resistant. The book investigates the pounding effects on base-isolated buildings, the soil-structure-interaction effects on adjacent buildings due to the impact, the seismic protection of adjacent buildings and the mitigation of earthquakeinduced vibrations of two adjacent structures. These concepts call for a new understanding of controlled systems with passive-active dampers and semi-active dampers. The passive control strategy of coupled buildings is investigated for seismic protection in comparison to active and semi-active control strategies.

Download or read book The Seismic Design Handbook written by Farzad Naeim and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook contains up-to-date existing structures, computer applications, and infonnation on planning, analysis, and design seismic design of wood structures. A new and very useful feature of this edition of earthquake-resistant building structures. Its intention is to provide engineers, architects, is the inclusion of a companion CD-ROM disc developers, and students of structural containing the complete digital version of the handbook itself and the following very engineering and architecture with authoritative, yet practical, design infonnation. It represents important publications: an attempt to bridge the persisting gap between l. UBC-IBC (1997-2000) Structural advances in the theories and concepts of Comparisons and Cross References, ICBO, earthquake-resistant design and their 2000. implementation in seismic design practice. 2. NEHRP Guidelines for the Seismic The distinguished panel of contributors is Rehabilitation of Buildings, FEMA-273, Federal Emergency Management Agency, composed of 22 experts from industry and universities, recognized for their knowledge and 1997. extensive practical experience in their fields. 3. NEHRP Commentary on the Guidelinesfor They have aimed to present clearly and the Seismic Rehabilitation of Buildings, FEMA-274, Federal Emergency concisely the basic principles and procedures pertinent to each subject and to illustrate with Management Agency, 1997. practical examples the application of these 4. NEHRP Recommended Provisions for principles and procedures in seismic design Seismic Regulations for New Buildings and practice. Where applicable, the provisions of Older Structures, Part 1 - Provisions, various seismic design standards such as mc FEMA-302, Federal Emergency 2000, UBC-97, FEMA-273/274 and ATC-40 Management Agency, 1997.

Download or read book Guidelines for earthquake resistant non engineered construction written by Arya, Anand S and published by UNESCO. This book was released on 2014-08-25 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Earthquake resistant Design Of Masonry Buildings written by Miha Tomazevic and published by World Scientific. This book was released on 1999-07-05 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last few decades, a considerable amount of experimental and analytical research on the seismic behaviour of masonry walls and buildings has been carried out. The investigations resulted in the development of methods for seismic analysis and design, as well as new technologies and construction systems. After many centuries of traditional use and decades of allowable stress design, clear concepts for limit state verification of masonry buildings under earthquake loading have recently been introduced in codes of practice.Although this book is not a review of the state-of-the-art of masonry structures in earthquake zones, an attempt has been made to balance the discussion on recent code requirements, state-of-the-art methods of earthquake-resistant design and the author's research work, in order to render the book useful for a broader application in design practice. An attempt has also been made to present, in a condensed but easy to understand way, all the information needed for earthquake-resistant design of masonry buildings constructed using traditional systems. The basic concepts of limit state verification are presented and equations for seismic resistance verification of masonry walls of all types of construction, (unreinforced, confined and reinforced) as well as masonry-infilled reinforced concrete frames, are addressed. A method for seismic resistance verification, compatible with recent code requirements, is also discussed. In all cases, experimental results are used to explain the proposed methods and equations.An important part of this book is dedicated to the discussion of the problems of repair, retrofit and rehabilitation of existing masonry buildings, including historical structures in urban centres. Methods of strengthening masonry walls as well as improving the structural integrity of existing buildings are described in detail. Wherever possible, experimental evidence regarding the effectiveness of the proposed strengthening methods is given.

Download or read book Earthquake Resistant Design and Risk Reduction written by and published by . This book was released on 2018-05 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whenever there is an earthquake-related disaster in the news bulletin with depictions of distorted buildings and other structures dispersed all over the place, one may doubtless think that earthquake-resistant design of structures is quiet in the dark ages. Obviously, the aim of professionals engaged in the field of earthquake-resistant design is to generate several cost-effective design solutions to make structures less vulnerable to earthquakes, even large earthquakes. As one of the most devastating natural events, earthquakes impose economic challenges on communities and governments. The number of human and economic assets at risk is growing as megacities and urban areas develop all over the world. The earthquake events have not only inflicted human and physical damage, they have also been able to cause considerable economic conflict in vulnerable cities and regions. The importance of the economic issues and the consequences of earthquakes attracted the attention of engineers and provided new research and working opportunities for engineers, who up until then had been concerned only with risk reduction options through engineering strategies. This book `Earthquake Resistant Design and Risk Reduction¿ is packed with the comprehensive information on recent development in earthquake-resistant structures, such as, buildings, bridges and liquid storage tanks. It contains chapters covering several interesting research topics written by researchers and experts in the field of earthquake engineering. The book covers seismic-resistance design of masonry and reinforced concrete structures to be constructed as well as safety assessment, strengthening and rehabilitation of existing structures against earthquake loads. It will also discuss the factors which will define the success of earthquake-resistant design concepts, approaches and techniques in the coming years.This book is an valuable guiding tool to civil and structural practicing engineers, researchers and postgraduate students in earthquake engineering and engineering seismology, policy makers and risk management officials.

Download or read book Earthquake Engineering Advanced Concepts and Mechanisms written by Courtney Silver and published by . This book was released on 2019-06-10 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake engineering is a field of engineering, which includes designing, and analyzing structures with respect to seismic loading. The main goal of earthquake engineering is to make structures, which are more earthquake resistant and resilient. The field is rapidly evolving with a major focus on protecting the society, and the environment by minimizing the seismic risk to socially and economically acceptable levels. The field includes concepts like seismic design, failure mode, earthquake-resistant construction, etc. Seismic vibration control devices are used in building structures to reduce the potential impact of earthquakes. This book includes contributions of experts and scientists, which will provide innovative insights into this field. It studies, analyzes and upholds the pillars of earthquake engineering and its utmost significance in modern times. Students, researchers, experts and all associated with the study of earthquake engineering will benefit alike from this text.

Download or read book Wind and Earthquake Resistant Buildings written by Bungale S. Taranath and published by CRC Press. This book was released on 2004-12-15 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed as a resource for practicing engineers, while simultaneously serving as a text in a formal classroom setting, Wind and Earthquake Resistant Buildings provides a fundmental understanding of the behavior of steel, concrete, and composite building structures. The text format follows, in a logical manner, the typical process of designing a bu

Download or read book Seismic Design for Architects written by Andrew Charleson and published by Routledge. This book was released on 2012-06-25 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic Design for Architects shows how structural requirements for seismic resistance can become an integral part of the design process. Structural integrity does not have to be at the expense of innovative, high standard design in seismically active zones. * By emphasizing design and discussing key concepts with accompanying visual material, architects are given the background knowledge and practical tools needed to deal with aspects of seismic design at all stages of the design process * Seismic codes from several continents are drawn upon to give a global context of seismic design * Extensively illustrated with diagrams and photographs * A non-mathematical approach focuses upon the principles and practice of seismic resistant design to enable readers to grasp the concepts and then readily apply them to their building designs Seismic Design for Architects is a comprehensive, practical reference work and text book for students of architecture, building science, architectural and civil engineering, and professional architects and structural engineers.

Download or read book Earthquake Resistant Structures written by Mohiuddin Ali Khan and published by Butterworth-Heinemann. This book was released on 2013-03-18 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake engineering is the ultimate challenge for structural engineers. Even if natural phenomena involve great uncertainties, structural engineers need to design buildings, bridges, and dams capable of resisting the destructive forces produced by them. These disasters have created a new awareness about the disaster preparedness and mitigation. Before a building, utility system, or transportation structure is built, engineers spend a great deal of time analyzing those structures to make sure they will perform reliably under seismic and other loads. The purpose of this book is to provide structural engineers with tools and information to improve current building and bridge design and construction practices and enhance their sustainability during and after seismic events. In this book, Khan explains the latest theory, design applications and Code Provisions. Earthquake-Resistant Structures features seismic design and retrofitting techniques for low and high raise buildings, single and multi-span bridges, dams and nuclear facilities. The author also compares and contrasts various seismic resistant techniques in USA, Russia, Japan, Turkey, India, China, New Zealand, and Pakistan. Written by a world renowned author and educator Seismic design and retrofitting techniques for all structures Tools improve current building and bridge designs Latest methods for building earthquake-resistant structures Combines physical and geophysical science with structural engineering

Download or read book Earthquake Design Practice for Buildings written by David Key and published by Thomas Telford. This book was released on 1988 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Illustrated and with a large number of photographs, diagrams and graphs, this title is a sound guide not only to the practising engineer who is unfamiliar with the concepts of seismic design but also to those familiar with the concepts but who want a concise design guide to what is sound engineering practice.