Download or read book Dynamics of Parallel Robots written by Sébastien Briot and published by Springer. This book was released on 2015-06-22 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book starts with a short recapitulation on basic concepts, common to any types of robots (serial, tree structure, parallel, etc.), that are also necessary for computation of the dynamic models of parallel robots. Then, as dynamics requires the use of geometry and kinematics, the general equations of geometric and kinematic models of parallel robots are given. After, it is explained that parallel robot dynamic models can be obtained by decomposing the real robot into two virtual systems: a tree-structure robot (equivalent to the robot legs for which all joints would be actuated) plus a free body corresponding to the platform. Thus, the dynamics of rigid tree-structure robots is analyzed and algorithms to obtain their dynamic models in the most compact form are given. The dynamic model of the real rigid parallel robot is obtained by closing the loops through the use of the Lagrange multipliers. The problem of the dynamic model degeneracy near singularities is treated and optimal trajectory planning for crossing singularities is proposed. Lastly, the approach is extended to flexible parallel robots and the algorithms for computing their symbolic model in the most compact form are given. All theoretical developments are validated through experiments.
Download or read book Dynamic Modeling of a Parallel Robot written by Robert John Ellwood and published by . This book was released on 2010 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling Identification and Control of Robots written by W. Khalil and published by Butterworth-Heinemann. This book was released on 2004-07-01 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by two of Europe's leading robotics experts, this book provides the tools for a unified approach to the modelling of robotic manipulators, whatever their mechanical structure. No other publication covers the three fundamental issues of robotics: modelling, identification and control. It covers the development of various mathematical models required for the control and simulation of robots.·World class authority·Unique range of coverage not available in any other book·Provides a complete course on robotic control at an undergraduate and graduate level
Download or read book Serial and Parallel Robot Manipulators written by Serdar Küçük and published by BoD – Books on Demand. This book was released on 2012-03-30 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The robotics is an important part of modern engineering and is related to a group of branches such as electric
Download or read book Advanced Dynamics Modeling Duality and Control of Robotic Systems written by Edward Y.L. Gu and published by CRC Press. This book was released on 2021-09-23 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides detailed fundamental theoretical reviews and preparations necessary for developing advanced dynamics modeling and control strategies for various types of robotic systems. This research book specifically addresses and discusses the uniqueness issue of representing orientation or rotation, and further proposes an innovative isometric embedding approach. The novel approach can not only reduce the dynamic formulation for robotic systems into a compact form, but it also offers a new way to realize the orientational trajectory-tracking control procedures. In addition, the book gives a comprehensive introduction to fundamentals of mathematics and physics that are required for modeling robot dynamics and developing effective control algorithms. Many computer simulations and realistic 3D animations to verify the new theories and algorithms are included in the book as well. It also presents and discusses the principle of duality involved in robot kinematics, statics, and dynamics. The duality principle can guide the dynamics modeling and analysis into a right direction for a variety of robotic systems in different types from open serial-chain to closed parallel-chain mechanisms. It intends to serve as a diversified research reference to a wide range of audience, including undergraduate juniors and seniors, graduate students, researchers, and engineers interested in the areas of robotics, control and applications.
Download or read book Dynamic Modeling and Feedforward Control of Tau Parallel Robot written by Jinsong Li and published by . This book was released on 2004 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamics of Parallel Robots written by Stefan Staicu and published by Springer. This book was released on 2018-09-14 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book establishes recursive relations concerning kinematics and dynamics of constrained robotic systems. It uses matrix modeling to determine the connectivity conditions on the relative velocities and accelerations in order to compare two efficient energetic ways in dynamics modeling: the principle of virtual work, and the formalism of Lagrange's equations. First, a brief fundamental theory is presented on matrix mechanics of the rigid body, which is then developed in the following five chapters treating matrix kinematics of the rigid body, matrix kinematics of the composed motion, kinetics of the rigid body, dynamics of the rigid body, and analytical mechanics. By using a set of successive mobile frames, the geometrical properties and the kinematics of the vector system of velocities and accelerations for each element of the robot are analysed. The dynamics problem is solved in two energetic ways: using an approach based on the principle of virtual work and applying the formalism of Lagrange's equations of the second kind. These are shown to be useful for real-time control of the robot's evolution. Then the recursive matrix method is applied to the kinematics and dynamics analysis of five distinct case studies: planar parallel manipulators, spatial parallel robots, planetary gear trains, mobile wheeled robots and, finally, two-module hybrid parallel robots.
Download or read book Parallel Robots written by Hamid D. Taghirad and published by CRC Press. This book was released on 2013-02-20 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel structures are more effective than serial ones for industrial automation applications that require high precision and stiffness, or a high load capacity relative to robot weight. Although many industrial applications have adopted parallel structures for their design, few textbooks introduce the analysis of such robots in terms of dynamics
Download or read book Design and Dynamic Modeling of a 5 Arm Parallel Robot with Flexible Arms written by 羅永辰 and published by . This book was released on 2018 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cable Driven Parallel Robots written by Tobias Bruckmann and published by Springer Science & Business Media. This book was released on 2012-09-09 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gathering presentations to the First International Conference on Cable-Driven Parallel Robots, this book covers classification and definition, kinematics, workspace analysis, cable modeling, hardware/prototype development, control and calibration and more.
Download or read book Informatics in Control Automation and Robotics written by Juan Andrade Cetto and published by Springer Science & Business Media. This book was released on 2011-05-02 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book includes a set of selected papers from the seventh "International Conference on Informatics in Control Automation and Robotics" (ICINCO 2010), held in Madeira, Portugal, from 15 to 18 June 2010. The conference was organized in three simultaneous tracks: "Intelligent Control Systems and Optimization", "Robotics and Automation" and "Signal Processing, Systems Modeling and Control". The book is based on the same structure. ICINCO received 320 paper submissions, not including those of workshops or special sessions, from 57 countries, in all continents. After a double blind paper review performed by the Program Committee only 27 submissions were accepted as full papers and thus selected for oral presentation, leading to a full paper acceptance ratio of 8%. Additional papers were accepted as short papers and posters. A further refinement was made after the conference, based also on the assessment of presentation quality, so that this book includes the extended and revised versions of the very best papers of ICINCO 2010. Commitment to high quality standards is a major concern of ICINCO that will be maintained in the next editions of this conference, including not only the stringent paper acceptance ratios but also the quality of the program committee, keynote lectures, workshops and logistics.
Download or read book Modeling and Nonlinear Robust Control of Delta Like Parallel Kinematic Manipulators written by Jonatan Martin Escorcia Hernandez and published by Elsevier. This book was released on 2022-11-29 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling and Nonlinear Robust Control of Delta-Like Parallel Kinematic Manipulators deals with the modeling and control of parallel robots. The book's content will benefit students, researchers and engineers in robotics by providing a simplified methodology to obtain the dynamic model of parallel robots with a delta-type architecture. Moreover, this methodology is compatible with the real-time implementation of model-based and robust control schemes. And, it can easily extend the proposed robust control solutions to other robotic architectures. Introduces a novel parallel robot designed for machining operations called SPIDER4 Presents a mathematical formulation of the kinematic and dynamic models of SPIDER4 Offers validation of the computed mathematical models and designed controllers through real-time experiments under different operating conditions
Download or read book Parallel Robots written by Hamid D. Taghirad and published by CRC Press. This book was released on 2013-02-20 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel structures are more effective than serial ones for industrial automation applications that require high precision and stiffness, or a high load capacity relative to robot weight. Although many industrial applications have adopted parallel structures for their design, few textbooks introduce the analysis of such robots in terms of dynamics and control. Filling this gap, Parallel Robots: Mechanics and Control presents a systematic approach to analyze the kinematics, dynamics, and control of parallel robots. It brings together analysis and design tools for engineers and researchers who want to design and implement parallel structures in industry. Covers Kinematics, Dynamics, and Control in One Volume The book begins with the representation of motion of robots and the kinematic analysis of parallel manipulators. Moving beyond static positioning, it then examines a systematic approach to performing Jacobian analysis. A special feature of the book is its detailed coverage of the dynamics and control of parallel manipulators. The text examines dynamic analysis using the Newton-Euler method, the principle of virtual work, and the Lagrange formulations. Finally, the book elaborates on the control of parallel robots, considering both motion and force control. It introduces various model-free and model-based controllers and develops robust and adaptive control schemes. It also addresses redundancy resolution schemes in detail. Analysis and Design Tools to Help You Create Parallel Robots In each chapter, the author revisits the same case studies to show how the techniques may be applied. The case studies include a planar cable-driven parallel robot, part of a promising new generation of parallel structures that will allow for larger workspaces. The MATLAB® code used for analysis and simulation is available online. Combining the analysis of kinematics and dynamics with methods of designing controllers, this text offers a holistic introduction for anyone interested in designing and implementing parallel robots.
Download or read book Modelling And Simulation Of Robot Manipulators A Parallel Processing Approach written by Albert Y Zomaya and published by World Scientific Publishing Company. This book was released on 1993-01-29 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to describe how parallel computer architectures can be used to enhance the performance of robots, and their great impact on future generations of robots. It provides an in-depth, consistent and rigorous treatment of the topic. A clear definition of tools with results is given which can be applied to parallel processing for robot kinematics and dynamics. Another advantageous feature is that the algorithms presented have been implemented using a parallel processing system, unlike many publications in the field which have presented results in only theoretical terms. This book also includes “benchmark” results that can be used for the development of future work, or can serve as a basis for comparison with other work. In addition, it surveys useful material to aid readers in pursuing further research.
Download or read book Parallel Kinematic Machines written by C.R. Boer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel Kinematic Machines (PKMs) are one of the most radical innovations in production equipment. They attempt to combine the dexterity of robots with the accuracy of machine tools to respond to several industrial needs. This book contains the proceedings of the first European-American Forum on Parallel Kinematic Machines, held in Milan, Italy from 31 August - 1 September 1998. The Forum was established to provide institutions, technology suppliers and industrial end users with an improved understanding of the real advantages to be gained from using PKMs. This book contributes to a mid-term strategy oriented to reduce time to market and costs, improve production flexibility and minimize environmental impacts to increase worldwide competitiveness. In particular the authors focus on enabling technologies and emerging concepts for future manufacturing applications of PKMs. Topics include: Current status of PKM R&D in Europe, the USA and Asia. Industrial requirements, roadblocks and application opportunities. Research issues and possibilities. Industrial applications and requirements.
Download or read book Modern Robotics written by Kevin M. Lynch and published by Cambridge University Press. This book was released on 2017-05-25 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern and unified treatment of the mechanics, planning, and control of robots, suitable for a first course in robotics.
Download or read book Parallel Robots written by J.P. Merlet and published by Springer. This book was released on 2000-07-31 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel robots are closed-loop mechanisms presenting very good performances in terms of accuracy, rigidity and ability to manipulate large loads. Parallel robots have been used in a large number of applications ranging from astronomy to flight simulators and are becoming increasingly popular in the field of machine-tool industry. This book presents a complete synthesis of the latest results on the possible mechanical architectures, analysis and synthesis of this type of mechanism. It is intended to be used by students (with over 100 exercises and numerous Internet addresses), researchers (with over 500 references and anonymous ftp access to the code of some algorithms presented in this book) and engineers (for which practical results and applications are presented).
