Download or read book DuBois and Pribble s Plastics Mold Engineering Handbook written by M.L. Buckleitner and published by Springer. This book was released on 1995-06-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: From day one of the concept of this book (about 1941), our objective has been to make the elearest possible statements about the thinking processes which go into the good design of a mold. CarefuHy chosen illustrations show the rational process. Recommendations are made to maximize the effectiveness. Basically, the design of a mold is only one-third of the team effort in producing a particular plastic part. The best molder in the world will be handicapped by a badly designed or a badly made mold. The best mold maker in the world cannot make a good mold from a bad design. The best design in the world will only be the best when the mold is weH made and operated by a knowledgeable molder. Being right the first time is, or should be, the prime objective of any mold designer. In the 1930's and 40's, it seemed every mold was an "invention. " A 1500 ton compression press was a "monster. " There were few design guidelines except the expertise of those toolmakers who had to use my designs. Fortunately for me, when a problem arose, my immediate mentor simply said, "Wayne, you designed it-go take care of the problem. " The comments of those toolmakers were not always complimentary.

Download or read book Plastics Mold Engineering Handbook written by Society of Plastics Engineers and published by . This book was released on 1978 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book DuBois and Pribble s Plastics Mold Engineering Handbook written by M.L. Buckleitner and published by Springer. This book was released on 2020-12-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: From day one of the concept of this book (about 1941), our objective has been to make the elearest possible statements about the thinking processes which go into the good design of a mold. CarefuHy chosen illustrations show the rational process. Recommendations are made to maximize the effectiveness. Basically, the design of a mold is only one-third of the team effort in producing a particular plastic part. The best molder in the world will be handicapped by a badly designed or a badly made mold. The best mold maker in the world cannot make a good mold from a bad design. The best design in the world will only be the best when the mold is weH made and operated by a knowledgeable molder. Being right the first time is, or should be, the prime objective of any mold designer. In the 1930's and 40's, it seemed every mold was an "invention. " A 1500 ton compression press was a "monster. " There were few design guidelines except the expertise of those toolmakers who had to use my designs. Fortunately for me, when a problem arose, my immediate mentor simply said, "Wayne, you designed it-go take care of the problem. " The comments of those toolmakers were not always complimentary.

Download or read book Plastics Mold Engineering Handbook written by J. Harry DuBois and published by Springer. This book was released on 2013-06-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book DuBois and Pribble s Plastics Mold Engineering Handbook written by Eric L. Buckleitner and published by Springer. This book was released on 1995-05-31 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: From day one of the concept of this book (about 1941), our objective has been to make the elearest possible statements about the thinking processes which go into the good design of a mold. CarefuHy chosen illustrations show the rational process. Recommendations are made to maximize the effectiveness. Basically, the design of a mold is only one-third of the team effort in producing a particular plastic part. The best molder in the world will be handicapped by a badly designed or a badly made mold. The best mold maker in the world cannot make a good mold from a bad design. The best design in the world will only be the best when the mold is weH made and operated by a knowledgeable molder. Being right the first time is, or should be, the prime objective of any mold designer. In the 1930's and 40's, it seemed every mold was an "invention. " A 1500 ton compression press was a "monster. " There were few design guidelines except the expertise of those toolmakers who had to use my designs. Fortunately for me, when a problem arose, my immediate mentor simply said, "Wayne, you designed it-go take care of the problem. " The comments of those toolmakers were not always complimentary.

Download or read book Plastics mold engineering written by John Harry Dubois and published by . This book was released on 1965 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Plastics Mold Engineering written by Bois J. H. and published by . This book was released on 1968 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Plastics Mold Engineering written by John Harry DuBois and published by . This book was released on 1946 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Plastics Mold Engineering written by John H. Du Bois and published by . This book was released on 1946 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Plastics Mold Engineering written by John Harry DuBois and published by . This book was released on 1947 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book SPI Plastics Engineering Handbook of the Society of the Plastics Industry Inc written by Michael L. Berins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1139 pages. Available in PDF, EPUB and Kindle. Book excerpt: I am pleased to present the Fifth Edition of the Plastics Engineering Handbook. Last published in 1976, this version of the standard industry reference on plastics processing incorporates the numerous revisions and additions necessitated by 14 years of activity in a dynamic industry. At that last printing, then-SPI President Ralph L. Harding, Jr. anticipated that plastics pro duction would top 26 billion pounds in 1976 (up from 1.25 billion in 1947, when the First Edition of this book was issued). As I write, plastics production in the United States had reached almost 60 billion pounds annually. Indeed, the story of the U.S. plastics industry always has been one of phenomenal growth and unparalleled innovation. While these factors make compilation of a book such as this difficult, they also make it necessary. Thus I acknowledge all those who worked to gather and relate the information included in this 1991 edition and thank them for the effort it took to make the Plastics Engineering Handbook a definitive source and invaluable tool for our industry. Larry L. Thomas President The Society of the Plastics Industry, Inc.

Download or read book Plastics Mold Engineering Handbook written by J. Harry DuBois and published by Springer. This book was released on 1987-12-31 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Plastic Mold Engineering written by Wayne I. Pribble and published by . This book was released on 1965 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Engineered Materials Handbook Desk Edition written by ASM International. Handbook Committee and published by ASM International. This book was released on 1995-11-01 with total page 1313 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference on the properties, selection, processing, and applications of the most widely used nonmetallic engineering materials. Section 1, General Information and Data, contains information applicable both to polymers and to ceramics and glasses. It includes an illustrated glossary, a collection of engineering tables and data, and a guide to materials selection. Sections 2 through 7 focus on polymeric materials--plastics, elastomers, polymer-matrix composites, adhesives, and sealants--with the information largely updated and expanded from the first three volumes of the Engineered Materials Handbook. Ceramics and glasses are covered in Sections 8 through 12, also with updated and expanded information. Annotation copyright by Book News, Inc., Portland, OR

Download or read book Plastics Product Design Engineering Handbook written by Sidney Levy and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics have become increasingly important in the products used in our society, ranging from housing to packaging, transportation, business machines and especially in medicine and health products. Designing plastic parts for this wide range of uses has become a major activity for designers, architects, engineers, and others who are concerned with product development. Because plastics are unique materials with a broad range of proper ties they are adaptable to a variety of uses. The uniqueness of plastics stems from their physical characteristics which are as different from metals, glasses, and ceramics as these materials are different from each other. One major concern is the design of structures to take loads. Metals as well as the other materials are assumed to respond elastically and to recover completely their original shape after the load is removed. Based on this simple fact, extensive litera ture on applied mechanics of materials has been developed to enable designers to predict accurately the performance of structures under load. Many engineers depend on such texts as Timoshenko's Strength of Materials as a guide to the performance of structures. Using this as a guide, generations of engineers have designed economical and safe structural parts. Unfortunately, these design principles must be modified when designing with plastics since they do not respond elastically to stress and undergo permanent deformation with sus tained loading.

Download or read book Plastics Mold Engineering Handbook written by John Harry DuBois and published by Van Nostrand Reinhold Company. This book was released on 1978 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Thermoplastic Elastomers written by Jiri George Drobny and published by Elsevier. This book was released on 2014-05-30 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Thermoplastic Elastomers, Second Edition presents a comprehensive working knowledge of thermoplastic elastomers (TPEs), providing an essential introduction for those learning the basics, but also detailed engineering data and best practice guidance for those already involved in polymerization, processing, and part manufacture. TPEs use short, cost-effective production cycles, with reduced energy consumption compared to other polymers, and are used in a range of industries including automotive, medical, construction and many more. This handbook provides all the practical information engineers need to successfully utilize this material group in their products, as well as the required knowledge to thoroughly ground themselves in the fundamental chemistry of TPEs. The data tables included in this book assist engineers and scientists in both selecting and processing the materials for a given product or application. In the second edition of this handbook, all chapters have been reviewed and updated. New polymers and applications have been added — particularly in the growing automotive and medical fields — and changes in chemistry and processing technology are covered. Provides essential knowledge of the chemistry, processing, properties, and applications for both new and established technical professionals in any industry utilizing TPEs Datasheets provide "at-a-glance" processing and technical information for a wide range of commercial TPEs and compounds, saving readers the need to contact suppliers Includes data on additional materials and applications, particularly in automotive and medical industries