Download or read book Drying Dynamics of Drops of Complex Fluids written by Abdulkadir Osman and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Drying of Complex Fluid Drops written by David Brutin and published by Royal Society of Chemistry. This book was released on 2022-06-01 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the phenomena of complex fluid drops with respect to drying is important for technology and a lot of research in academia and industry is poured into this topic. This book addresses this industrially important area and provides a thorough grounding to the field.
Download or read book Drop Bubble and Particle Dynamics in Complex Fluids written by Pengtao Yue and published by MDPI. This book was released on 2020-03-19 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: The presence of drops, bubbles, and particles affects the behavior and response of complex multiphase fluids. In many applications, these complex fluids have more than one non-Newtonian component, e.g., polymer melts, liquid crystals, and blood plasma. In fact, most fluids exhibit non-Newtonian behaviors, such as yield stress, viscoelastity, viscoplasticity, shear thinning, or shear thickening, under certain flow conditions. Even in the complex fluids composed of Newtonian components, the coupling between different components and the evolution of internal boundaries often lead to a complex rheology. Thus the dynamics of drops, bubbles, and particles in both Newtonian fluids and non-Newtonian fluids are crucial to the understanding of the macroscopic behavior of complex fluids. This Special Issue aims to gather a wide variety of papers that focus on drop, bubble and particle dynamics in complex fluids. Potential topics include, but are not limited to, drop deformation, rising drops, pair-wise drop interactions, drop migration in channel flows, and the interaction of particles with flow systems such as pastes and slurries, glasses, suspensions, and emulsions. We emphasize numerical simulations, but also welcome experimental and theoretical contributions.
Download or read book Droplet Wetting and Evaporation written by David Brutin and published by Academic Press. This book was released on 2015-05-11 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Droplet Wetting and Evaporation provides engineers, students, and researchers with the first comprehensive guide to the theory and applications of droplet wetting and evaporation. Beginning with a relevant theoretical background, the book moves on to consider specific aspects, including heat transfer, flow instabilities, and the drying of complex fluid droplets. Each chapter covers the principles of the subject, addressing corresponding practical issues and problems. The text is ideal for a broad range of domains, from aerospace and materials, to biomedical applications, comprehensively relaying the challenges and approaches from the different communities leading the way in droplet research and development. Provides a broad, cross-subject coverage of theory and application that is ideal for engineers, students and researchers who need to follow all major developments in this interdisciplinary field Includes comprehensive discussions of heat transfer, flow instabilities, and the drying of complex fluid droplets Begins with an accessible summary of fundamental theory before moving on to specific areas such as heat transfer, flow instabilities, and the drying of complex fluid droplets
Download or read book Drying of Complex Fluid Drops written by David Brutin and published by Royal Society of Chemistry. This book was released on 2022-06-01 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coffee rings, paint drying, blood splatter are all examples of complex fluids drying. Understanding the phenomena of complex fluid drops with respect to drying is important for technology and a lot of research in academia and industry is poured into this topic. This book addresses this industrially important area and provides a thorough grounding to the field. Addressing the fundamental underpinnings of wetting, spreading and drying, the book then takes the reader through key applications grouped into themes, including colloidal droplets (used in printing) and biological (e.g. bloodstain analysis for forensics). With a section on modelling and simulation to balance experiment with computational tools, this book will appeal to anyone working in complex fluids across classical fluid mechanics, soft matter, and chemical, biological and mechanical engineering
Download or read book Drop Bubble and Particle Dynamics in Complex Fluids written by Pengtao Yue and published by . This book was released on 2020 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: The presence of drops, bubbles, and particles affects the behavior and response of complex multiphase fluids. In many applications, these complex fluids have more than one non-Newtonian component, e.g., polymer melts, liquid crystals, and blood plasma. In fact, most fluids exhibit non-Newtonian behaviors, such as yield stress, viscoelastity, viscoplasticity, shear thinning, or shear thickening, under certain flow conditions. Even in the complex fluids composed of Newtonian components, the coupling between different components and the evolution of internal boundaries often lead to a complex rheology. Thus the dynamics of drops, bubbles, and particles in both Newtonian fluids and non-Newtonian fluids are crucial to the understanding of the macroscopic behavior of complex fluids. This Special Issue aims to gather a wide variety of papers that focus on drop, bubble and particle dynamics in complex fluids. Potential topics include, but are not limited to, drop deformation, rising drops, pair-wise drop interactions, drop migration in channel flows, and the interaction of particles with flow systems such as pastes and slurries, glasses, suspensions, and emulsions. We emphasize numerical simulations, but also welcome experimental and theoretical contributions.
Download or read book Dynamics of Droplets written by Arnold Frohn and published by Springer Science & Business Media. This book was released on 2000-03-27 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book deals with the dynamical behaviour of single droplets and regular droplet systems. After a short description of the theoretical background, the different experimental facilities and methods necessary for the investigation of single droplets are described in detail. A summary of important applications is included.
Download or read book The Surface Wettability Effect on Phase Change written by Marco Marengo and published by Springer Nature. This book was released on 2021-10-30 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Surface Wettability Effect on Phase Change collects high level contributions from internationally recognised scientists in the field. It thoroughly explores surface wettability, with topics spanning from the physics of phase change, physics of nucleation, mesoscale modeling, analysis of phenomena such drop evaporation, boiling, local heat flux at triple line, Leidenfrost, dropwise condensation, heat transfer enhancement, freezing, icing. All the topics are treated by discussing experimental results, mathematical modeling and numerical simulations. In particular, the numerical methods look at direct numerical simulations in the framework of VOF simulations, phase-field simulations and molecular dynamics. An introduction to equilibrium and non-equilibrium thermodynamics of phase change, wetting phenomena, liquid interfaces, numerical simulation of wetting phenomena and phase change is offered for readers who are less familiar in the field. This book will be of interest to researchers, academics, engineers, and postgraduate students working in the area of thermofluids, thermal management, and surface technology.
Download or read book Droplets and Sprays Simple Models of Complex Processes written by Sergei S. Sazhin and published by Springer Nature. This book was released on 2022-06-28 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book acts as a guide to simple models that describe some of the complex fluid dynamics, heat/mass transfer and combustion processes in droplets and sprays. Attention is focused mainly on the use of classical hydrodynamics, and a combination of kinetic and hydrodynamic models, to analyse the heating and evaporation of mono- and multi-component droplets. The models were developed for cases when small and large numbers of components are present in droplets. Some of these models are used for the prediction of time to puffing/micro-explosion of composite water/fuel droplets — processes that are widely used in combustion devices to stimulate disintegration of relatively large droplets into smaller ones. The predictions of numerical codes based on these models are validated against experimental results where possible. In most of the models, droplets are assumed to be spherical; some preliminary results of the generalisation of these models to the case of non-spherical droplets, approximating them as spheroids, are presented.
Download or read book Desiccation Cracks and their Patterns written by Lucas Goehring and published by John Wiley & Sons. This book was released on 2015-06-08 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together basic ideas, classical theories, recent experimental and theoretical aspects, this book explains desiccation cracks from simple, easily-comprehensible cases to more complex, applied situations. The ideal team of authors, combining experimental and theoretical backgrounds, and with experience in both physical and earth sciences, discuss how the study of cracks can lead to the design of crack-resistant materials, as well as how cracks can be grown to generate patterned surfaces at the nano- and micro-scales. Important research and recent developments on tailoring desiccation cracks by different methods are covered, supported by straightforward, yet deep theoretical models. Intended for a broad readership spanning physics, materials science, and engineering to the geosciences, the book also includes additional reading especially for students engaged in pattern formation research.
Download or read book Drops and Jets of Complex Fluids written by and published by . This book was released on 2013 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Large Area and Flexible Electronics written by Mario Caironi and published by John Wiley & Sons. This book was released on 2015-01-13 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: From materials to applications, this ready reference covers the entire value chain from fundamentals via processing right up to devices, presenting different approaches to large-area electronics, thus enabling readers to compare materials, properties and performance. Divided into two parts, the first focuses on the materials used for the electronic functionality, covering organic and inorganic semiconductors, including vacuum and solution-processed metal-oxide semiconductors, nanomembranes and nanocrystals, as well as conductors and insulators. The second part reviews the devices and applications of large-area electronics, including flexible and ultra-high-resolution displays, light-emitting transistors, organic and inorganic photovoltaics, large-area imagers and sensors, non-volatile memories and radio-frequency identification tags. With its academic and industrial viewpoints, this volume provides in-depth knowledge for experienced researchers while also serving as a first-stop resource for those entering the field.
Download or read book Physical Science Under Microgravity Experiments on Board the SJ 10 Recoverable Satellite written by Wenrui Hu and published by Springer Nature. This book was released on 2019-10-16 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the physical science experiments in a space microgravity environment conducted on board the SJ-10 recoverable satellite, which was launched on April 6th, 2016 and recovered on April 18th, 2016. The experiments described were selected from ~100 proposals from various institutions in China and around the world, and have never previously been conducted in the respective fields. They involve fluid physics and materials science, and primarily investigate the kinetic properties of matter in a space microgravity environment. The book provides a comprehensive review of these experiments, as well as the mission’s execution, data collection, and scientific outcomes.
Download or read book Fluid Dynamics and Transport of Droplets and Sprays written by William A. Sirignano and published by Cambridge University Press. This book was released on 2005-09-08 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of droplets and sprays has developed rapidly over the past two decades because of their many important applications, from automobile engine combustion to drug aerosols. This book addresses the complex subject of the interactions of droplets and sprays. It describes the behavior of an individual droplet in a spray, the behavior of a spray, and the critical relationships between the two. Along with a strong theoretical foundation, the book presents results in a way that will be useful for engineering practice, with summaries of key formulae and examples of various spray computations. Among topics covered are transient heating (or cooling) and vaporization (or condensation), multicomponent liquid droplet vaporization, near critical and supercritical ambient conditions, interaction of droplets with turbulent or vortical structures, distortion of the spherical shape and secondary atomization of the droplets, and computational issues. As an authoritative review of the science and technology of droplets and sprays, this book will be useful for graduate students, researchers, and practicing engineers.
Download or read book Pattern Recognition and Machine Intelligence written by Bhabesh Deka and published by Springer Nature. This book was released on 2019-11-25 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set of LNCS 11941 and 11942 constitutes the refereed proceedings of the 8th International Conference on Pattern Recognition and Machine Intelligence, PReMI 2019, held in Tezpur, India, in December 2019. The 131 revised full papers presented were carefully reviewed and selected from 341 submissions. They are organized in topical sections named: Pattern Recognition; Machine Learning; Deep Learning; Soft and Evolutionary Computing; Image Processing; Medical Image Processing; Bioinformatics and Biomedical Signal Processing; Information Retrieval; Remote Sensing; Signal and Video Processing; and Smart and Intelligent Sensors.
Download or read book Drying of Complex Fluids Near the Contact Line written by Ching Hsueh and published by . This book was released on 2012 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: We study the pattern formation induced by drying colloidal suspensions and polymer solutions in a vertical Hele-Shaw cell immersed in a reservoir (dip-coating like set-up). The contact line speed is controlled by pumping the solution from the reservoir. At low capillary number stick-slip motion of the receding contact line is observed for silica suspensions. Periodic strips spontaneously form during drying. We study the wavelength and deposit morphology as a function of the mean receding velocity. The pinning force variation is deduced from the contact line displacement. The effect of the solution pH and size of the particles on the deposit morphology, wavelength, and pinning force is analyzed. Results are compared to some models of the literature. In the same conditions dried polymer films are almost flat, but stick-slip motion is found at higher temperature. In the second part of this manuscript, a 2D model has been developed to describe the flow inside the Hele-Shaw cell induced by the imposed velocity and non-uniform evaporation flux. The model is governed by Stokes equation and Fick's law. A small truncation at the meniscus tip is applied in order to avoid the singularity due to the divergence of the evaporation flux. Lubrication approximation as well as global mass balances are used to express the boundary conditions. Deposit thickness and the flow properties are studied as a function of the process parameters (imposed velocity, evaporation rate, and solute concentration) and the system properties (kinetic viscosity, diffusion coefficient). Finally, we compare our simulation results with a simple model. This model is a first step to study mass transfer in a meniscus.
Download or read book Wetting and Evaporation Droplets of Pure and Complex Fluids written by and published by . This book was released on 2013 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: