Download or read book Distributed Energy Resource DER Reliability for Backup Electric Power Systems written by and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hospitals, emergency services, military bases, ports, airports, industries, commercial facilities, and others rely on backup power systems to provide electricity for their critical loads during grid outages. The purpose of this report it to provide accurate reliability information on commonly deployed distributed energy resources (DERs) to improve quantitative estimates for the reliability of these backup power systems during a grid outage. A backup power system consists of DERs, an electric distribution system with its associated switches and other devices, and mechanisms to control and manage the flow of electricity. Too often, facilities and campuses fail to properly quantify the reliability of their backup power systems. DERs are assumed to be 100% reliable, with the only concern being the availability of fuel. Such assumptions can lead to gross errors in the backup system's reliability estimates, particularly for long-duration outages. This report provides a set of estimates for reliability of emergency diesel generators (EDGs), natural gas prime generators and combined heat and power (CHP) prime movers, solar photovoltaics (PV), wind turbines, and Li-ion battery energy storage systems (BESS). The estimates are derived from empirical data when available and supplemented by modeling results when needed. These reliability estimates are for the DERs ability to provide power during a grid outage, ranging from an hour to 2 weeks.

Download or read book Impact of Distributed Energy Resources on the Reliability of a Critical Telecommunications Facility written by David Robinson and published by DIANE Publishing. This book was released on 2009-05 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: Documents a probabilistic risk assessment of an existing power supply system at a large telecomm. office. The focus is on characterizing the increase in the reliability of power supply through the use of two alternative power configurations. Failures in the power systems supporting major telecomm. service nodes are a main contributor to major telecomm. outages. A logical approach to improve the robustness of telecomm. facilities would be to increase the depth and breadth of technologies available to restore power in the face of power outages. Distributed energy resources such as fuel cells and gas turbines could provide one more onsite electric power source to provide backup power, if batteries and diesel generators fail. Illustrations.

Download or read book Integration of Distributed Energy Resources in Power Systems written by Toshihisa Funabashi and published by Academic Press. This book was released on 2016-03-23 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integration of Distributed Energy Resources in Power Systems: Implementation, Operation and Control covers the operation of power transmission and distribution systems and their growing difficulty as the share of renewable energy sources in the world’s energy mix grows and the proliferation trend of small scale power generation becomes a reality. The book gives students at the graduate level, as well as researchers and power engineering professionals, an understanding of the key issues necessary for the development of such strategies. It explores the most relevant topics, with a special focus on transmission and distribution areas. Subjects such as voltage control, AC and DC microgrids, and power electronics are explored in detail for all sources, while not neglecting the specific challenges posed by the most used variable renewable energy sources. Presents the most relevant aspects of the integration of distributed energy into power systems, with special focus on the challenges for transmission and distribution Explores the state-of the-art in applications of the most current technology, giving readers a clear roadmap Deals with the technical and economic features of distributed energy resources and discusses their business models

Download or read book Handbook of Distributed Generation written by Ramesh Bansal and published by Springer. This book was released on 2017-03-07 with total page 813 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features extensive coverage of all Distributed Energy Generation technologies, highlighting the technical, environmental and economic aspects of distributed resource integration, such as line loss reduction, protection, control, storage, power electronics, reliability improvement, and voltage profile optimization. It explains how electric power system planners, developers, operators, designers, regulators and policy makers can derive many benefits with increased penetration of distributed generation units into smart distribution networks. It further demonstrates how to best realize these benefits via skillful integration of distributed energy sources, based upon an understanding of the characteristics of loads and network configuration.

Download or read book Distributed Energy Resources in Local Integrated Energy Systems written by Giorgio Graditi and published by Elsevier. This book was released on 2021-02-27 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distributed Energy Resources in Local Integrated Energy Systems: Optimal Operation and Planning reviews research and policy developments surrounding the optimal operation and planning of DER in the context of local integrated energy systems in the presence of multiple energy carriers, vectors and multi-objective requirements. This assessment is carried out by analyzing impacts and benefits at local levels, and in distribution networks and larger systems. These frameworks represent valid tools to provide support in the decision-making process for DER operation and planning. Uncertainties of RES generation and loads in optimal DER scheduling are addressed, along with energy trading and blockchain technologies. Interactions among various energy carriers in local energy systems are investigated in scalable and flexible optimization models for adaptation to a number of real contexts thanks to the wide variety of generation, conversion and storage technologies considered, the exploitation of demand side flexibility, emerging technologies, and through the general mathematical formulations established. Integrates multi-energy DER, including electrical and thermal distributed generation, demand response, electric vehicles, storage and RES in the context of local integrated energy systems Fosters the integration of DER in the electricity markets through the concepts of DER aggregation Addresses the challenges of emerging paradigms as energy communities and energy blockchain applications in the current and future energy landscape Proposes operation optimization models and methods through multi-objective approaches for fostering short- and long-run sustainability of local energy systems Assesses and models the uncertainties of renewable resources and intermittent loads in the short-term decision-making process for smart decentralized energy systems

Download or read book DER Benefits Analysis Studies written by Joseph J. Iannucci and published by . This book was released on 2003 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Optimal Planning and Operation of Distributed Energy Resources written by S. N. Singh and published by Springer Nature. This book was released on 2023-08-07 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book deals with integrated distributed energy resources in existing power systems optimally to mitigate power quality issues in power systems. The book is designed for research using modern optimization techniques and a thorough analysis of renewable energy. The book provides an in-depth study of recent trends of research scope around the globe and also includes modern heuristic approaches, hands-on data, and case studies of all important dimensions of distributed energy resources. It addresses key issues such as the integration of DERs and electric vehicles, optimization algorithms, management of DERs with electric vehicles, energy pool management mechanisms, protection, and reliability in the restructured power system. This book will be useful for students, research scholars, practitioners, and academicians.

Download or read book Impact of Distributed Energy Resources on the Reliability of Critical Telecommunications Facilities written by David Gerald Robinson and published by . This book was released on 2006 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper documents a probabilistic risk assessment of existing and alternative power supply systems at a large telecommunications office. The analysis characterizes the increase in the reliability of power supply through the use of two alternative power configurations. Failures in the power systems supporting major telecommunications service nodes are a main contributor to significant telecommunications outages. A logical approach to improving the robustness of telecommunication facilities is to increase the depth and breadth of technologies available to restore power during power outages. Distributed energy resources such as fuel cells and gas turbines could provide additional on-site electric power sources to provide backup power, if batteries and diesel generators fail. The analysis is based on a hierarchical Bayesian approach and focuses on the failure probability associated with each of three possible facility configurations, along with assessment of the uncertainty or confidence level in the probability of failure. A risk-based characterization of final best configuration is presented.

Download or read book Distributed Energy Resources in Microgrids written by Rajeev Kumar Chauhan and published by Academic Press. This book was released on 2019-08-17 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distributed Energy Resources in Microgrids: Integration, Challenges and Optimization unifies classically unconnected aspects of microgrids by considering them alongside economic analysis and stability testing. In addition, the book presents well-founded mathematical analyses on how to technically and economically optimize microgrids via distributed energy resource integration. Researchers and engineers in the power and energy sector will find this information useful for combined scientific and economical approaches to microgrid integration. Specific sections cover microgrid performance, including key technical elements, such as control design, stability analysis, power quality, reliability and resiliency in microgrid operation. Addresses the challenges related to the integration of renewable energy resources Includes examples of control algorithms adopted during integration Presents detailed methods of optimization to enhance successful integration

Download or read book Reliability Engineering and Services written by Tongdan Jin and published by John Wiley & Sons. This book was released on 2018-12-20 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers a holistic approach to guiding product design, manufacturing, and after-sales support as the manufacturing industry transitions from a product-oriented model to service-oriented paradigm This book provides fundamental knowledge and best industry practices in reliability modelling, maintenance optimization, and service parts logistics planning. It aims to develop an integrated product-service system (IPSS) synthesizing design for reliability, performance-based maintenance, and spare parts inventory. It also presents a lifecycle reliability-inventory optimization framework where reliability, redundancy, maintenance, and service parts are jointly coordinated. Additionally, the book aims to report the latest advances in reliability growth planning, maintenance contracting and spares inventory logistics under non-stationary demand condition. Reliability Engineering and Service provides in-depth chapter coverage of topics such as: Reliability Concepts and Models; Mean and Variance of Reliability Estimates; Design for Reliability; Reliability Growth Planning; Accelerated Life Testing and Its Economics; Renewal Theory and Superimposed Renewals; Maintenance and Performance-Based Logistics; Warranty Service Models; Basic Spare Parts Inventory Models; Repairable Inventory Systems; Integrated Product-Service Systems (IPPS), and Resilience Modeling and Planning Guides engineers to design reliable products at a low cost Assists service engineers in providing superior after-sales support Enables managers to respond to the changing market and customer needs Uses end-of-chapter case studies to illustrate industry best practice Lifecycle approach to reliability, maintenance and spares provisioning Reliability Engineering and Service is an important book for graduate engineering students, researchers, and industry-based reliability practitioners and consultants.

Download or read book Impact of Distributed Energy Resources on the Reliability of a Critical Telecommunications Facility written by and published by . This book was released on 2006 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report documents a probabilistic risk assessment of an existing power supply system at a large telecommunications office. The focus is on characterizing the increase in the reliability of power supply through the use of two alternative power configurations. Telecommunications has been identified by the Department of Homeland Security as a critical infrastructure to the United States. Failures in the power systems supporting major telecommunications service nodes are a main contributor to major telecommunications outages. A logical approach to improve the robustness of telecommunication facilities would be to increase the depth and breadth of technologies available to restore power in the face of power outages. Distributed energy resources such as fuel cells and gas turbines could provide one more onsite electric power source to provide backup power, if batteries and diesel generators fail. The analysis is based on a hierarchical Bayesian approach and focuses on the failure probability associated with each of three possible facility configurations, along with assessment of the uncertainty or confidence level in the probability of failure. A risk-based characterization of final best configuration is presented.

Download or read book Enhancing the Resilience of the Nation s Electricity System written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2017-10-25 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: Americans' safety, productivity, comfort, and convenience depend on the reliable supply of electric power. The electric power system is a complex "cyber-physical" system composed of a network of millions of components spread out across the continent. These components are owned, operated, and regulated by thousands of different entities. Power system operators work hard to assure safe and reliable service, but large outages occasionally happen. Given the nature of the system, there is simply no way that outages can be completely avoided, no matter how much time and money is devoted to such an effort. The system's reliability and resilience can be improved but never made perfect. Thus, system owners, operators, and regulators must prioritize their investments based on potential benefits. Enhancing the Resilience of the Nation's Electricity System focuses on identifying, developing, and implementing strategies to increase the power system's resilience in the face of events that can cause large-area, long-duration outages: blackouts that extend over multiple service areas and last several days or longer. Resilience is not just about lessening the likelihood that these outages will occur. It is also about limiting the scope and impact of outages when they do occur, restoring power rapidly afterwards, and learning from these experiences to better deal with events in the future.

Download or read book Distributed Energy Resources Interconnection Systems written by N. Richard Friedman and published by . This book was released on 2002 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Operation of Distributed Energy Resources in Smart Distribution Networks written by Kazem Zare and published by Academic Press. This book was released on 2018-06-05 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Operation of Distributed Energy Resources in Smart Distribution Networks defines the barriers and challenges of smart distribution networks, ultimately proposing optimal solutions for addressing them. The book considers their use as an important part of future electrical power systems and their ability to improve the local flexibility and reliability of electrical systems. It carefully defines the concept as a radial network with a cluster of distributed energy generations, various types of loads, and energy storage systems. In addition, the book details how the huge penetration of distributed energy resources and the intermittent nature of renewable generations may cause system problems. Readers will find this to be an important resource that analyzes and introduces the features and problems of smart distribution networks from different aspects. Integrates different types of elements, including electrical vehicles, demand response programs, and various renewable energy sources in distribution networks Proposes optimal operational models for the short-term performance and scheduling of a distribution network Discusses the uncertainties of renewable resources and intermittent load in the decision-making process for distribution networks

Download or read book Renewable and Efficient Electric Power Systems written by Gilbert M. Masters and published by John Wiley & Sons. This book was released on 2005-01-03 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a comprehensive textbook for the new trend of distributed power generation systems and renewable energy sources in electric power systems. It covers the complete range of topics from fundamental concepts to major technologies as well as advanced topics for power consumers. An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department -- to obtain the manual, send an email to [email protected]

Download or read book Spatial and Temporal Variability of Solar Energy written by Richard Perez and published by Now Publishers. This book was released on 2016-05-10 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unlike conventional electrical power generation (such as fossil or nuclear energy), solar energy is intermittent. The output of a solar power plant is driven by weather and by the cycle of days and seasons. It varies from zero to full power outside the control of plant operators. Spatial and Temporal Variability of Solar Energy summarizes and analyzes recent research by the authors and others to understand, characterize, and model solar resource variability. This research shows that understanding solar energy variability requires a definition of the temporal and spatial context for which variability is assessed; and describes a predictable, quantifiable variability-smoothing space-time continuum from a single point to thousands of kilometers and from seconds to days. It also discusses the implications for solar penetration on the power grid and variability mitigation strategies.

Download or read book Evaluation of Distribution Analysis Software for DER Applications written by RH. Staunton and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The term ''Distributed energy resources'' or DER refers to a variety of compact, mostly self-contained power-generating technologies that can be combined with energy management and storage systems and used to improve the operation of the electricity distribution system, whether or not those technologies are connected to an electricity grid. Implementing DER can be as simple as installing a small electric generator to provide backup power at an electricity consumer's site. Or it can be a more complex system, highly integrated with the electricity grid and consisting of electricity generation, energy storage, and power management systems. DER devices provide opportunities for greater local control of electricity delivery and consumption. They also enable more efficient utilization of waste heat in combined cooling, heating and power (CHP) applications--boosting efficiency and lowering emissions. CHP systems can provide electricity, heat and hot water for industrial processes, space heating and cooling, refrigeration, and humidity control to improve indoor air quality. DER technologies are playing an increasingly important role in the nation's energy portfolio. They can be used to meet base load power, peaking power, backup power, remote power, power quality, as well as cooling and heating needs. DER systems, ranging in size and capacity from a few kilowatts up to 50 MW, can include a number of technologies (e.g., supply-side and demand-side) that can be located at or near the location where the energy is used. Information pertaining to DER technologies, application solutions, successful installations, etc., can be found at the U.S. Department of Energy's DER Internet site [1]. Market forces in the restructured electricity markets are making DER, both more common and more active in the distribution systems throughout the US [2]. If DER devices can be made even more competitive with central generation sources this trend will become unstoppable. In response, energy providers will be forced to both fully acknowledge the trend and plan for accommodating DER [3]. With bureaucratic barriers [4], lack of time/resources, tariffs, etc. still seen in certain regions of the country, changes still need to be made. Given continued technical advances in DER, the time is fast approaching when the industry, nation-wide, must not only accept DER freely but also provide or review in-depth technical assessments of how DER should be integrated into and managed throughout the distribution system. Characterization studies are needed to fully understand how both the utility system and DER devices themselves will respond to all reasonable events (e.g., grid disturbances, faults, rapid growth, diverse and multiple DER systems, large reactive loads). Some of this work has already begun as it relates to operation and control of DER [5] and microturbine performance characterization [6,7]. One of the most urgently needed tools that can provide these types of analyses is a distribution network analysis program in combination with models for various DER. Together, they can be used for (1) analyzing DER placement in distribution networks and (2) helping to ensure that adequate transmission reliability is maintained. Surveys of the market show products that represent a partial match to these needs; specifically, software that has been developed to plan electrical distribution systems and analyze reliability (in a near total absence of DER). The first part of this study (Sections 2 and 3 of the report) looks at a number of these software programs and provides both summary descriptions and comparisons. The second part of this study (Section 4 of the report) considers the suitability of these analysis tools for DER studies. It considers steady state modeling and assessment work performed by ORNL using one commercially available tool on feeder data provided by a southern utility. Appendix A provides a technical report on the results of this modeling effort.