Download or read book Digital Shearography written by Wolfgang Steinchen and published by SPIE-International Society for Optical Engineering. This book was released on 2003 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steinchen and Yang, for whom credentials are not cited, present the principle and procedure of the technique and its application in nondestructive testing, strain measurement, and vibration analysis. Aiming to meet the requirements of both beginning and experienced researchers, they emphasize the quantitative evaluation of shearographic interferograms, and offer examples of applications using it in quantifying heat flow rate, and analyzing deviations. Annotation (c)2003 Book News, Inc., Portland, OR (booknews.com).
Download or read book Digital Shearography written by Lianxiang Yang and published by . This book was released on 2016 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has been more than a decade since SPIE Press published the first book on shearography in 2003: Digital Shearography: Theory and Application of Digital Speckle Pattern Shearing Interferometry by Wolfgang Steinchen and Lianxiang Yang. That book has greatly contributed to enabling better understanding and improvement of the digital shearography technique. During the past 13 years, digital shearography has been widely applied by industry and accepted as a practical tool for nondestructive testing; at the same time, the technique itself has been greatly improved. This new book presents the principles and applications of phase shift digital shearography, especially spatial phase shift digital shearography, and reviews the state-of-the-art improvements and new developments of digital shearography for nondestructive testing and strain measurement. The authors provide a unified, self-contained treatment of the theory, practice, and applications of shearographic interferometry with problems and questions. The book will meet the requirements of graduate students, as well as be of assistance in research and industry applications.
Download or read book Digital Shearography written by Lianxiang Yang and published by . This book was released on 2016 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has been more than a decade since SPIE Press published the first book on shearography in 2003: Digital Shearography: Theory and Application of Digital Speckle Pattern Shearing Interferometry by Wolfgang Steinchen and Lianxiang Yang. That book has greatly contributed to enabling better understanding and improvement of the digital shearography technique. During the past 13 years, digital shearography has been widely applied by industry and accepted as a practical tool for nondestructive testing; at the same time, the technique itself has been greatly improved. This new book presents the principles and applications of phase shift digital shearography, especially spatial phase shift digital shearography, and reviews the state-of-the-art improvements and new developments of digital shearography for nondestructive testing and strain measurement. The authors provide a unified, self-contained treatment of the theory, practice, and applications of shearographic interferometry with problems and questions. The book will meet the requirements of graduate students, as well as be of assistance in research and industry applications.
Download or read book Digital Shearography written by Lianxiang Yang and published by SPIE-International Society for Optical Engineering. This book was released on 2016-05-01 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: "With this book, written in memory of my PhD advisor, Professor Dr.-Ing. Wolfgang Steinchen (1939-2007)."
Download or read book Digital Holography written by Ulf Schnars and published by Springer Science & Business Media. This book was released on 2005-12-08 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly practical and self-contained guidebook explains the principles and major applications of digital hologram recording and numerical reconstruction (Digital Holography). A special chapter is designated to digital holographic interferometry with applications in deformation and shape measurement and refractive index determination. Applications in imaging and microscopy are also described. Spcial techniques such as digital light-in-flight holography, holographic endoscopy, information encrypting, comparative holography, and related techniques of speckle metrology are also treated
Download or read book Digital Optical Measurement Techniques and Applications written by Pramod Rastogi and published by Artech House. This book was released on 2015-05-01 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new resource explains the principles and applications of today’s digital optical measurement techniques. From start to finish, each chapter provides a concise introduction to the concepts and principles of digital optical metrology, followed by a detailed presentation of their applications. The development of all these topics, including their numerous methods, principles, and applications, has been illustrated using a large number of easy-to-understand figures. This book aims to not only help the reader identify the appropriate techniques in function of the measurement requirements, but also assess modern digital measurement systems.
Download or read book Digital Holography and Wavefront Sensing written by Ulf Schnars and published by Springer. This book was released on 2014-09-19 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly practical and self-contained guidebook explains the principles and major applications of digital hologram recording and numerical reconstruction (Digital Holography). A special chapter is designated to digital holographic interferometry with applications in deformation and shape measurement and refractive index determination. Applications in imaging and microscopy are also described. Spcial techniques such as digital light-in-flight holography, holographic endoscopy, information encrypting, comparative holography, and related techniques of speckle metrology are also treated
Download or read book Fracture of Nano and Engineering Materials and Structures written by E.E. Gdoutos and published by Springer Science & Business Media. This book was released on 2008-01-08 with total page 1452 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 16th European Conference of Fracture (ECF16) was held in Greece, July, 2006. It focused on all aspects of structural integrity with the objective of improving the safety and performance of engineering structures, components, systems and their associated materials. Emphasis was given to the failure of nanostructured materials and nanostructures including micro- and nano-electromechanical systems (MEMS and NEMS).
Download or read book Advanced Aerospace Materials written by Haim Abramovich and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-04-26 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is for engineers and students of aerospace, materials and mechanical engineering. It covers the transition from aluminum to composite materials for aerospace structures and includes advanced analyses used in industries. New in the 2nd Edition is material on morphing structures, large deflection plates, nondestructive methods, vibration correlation technique for shear loaded plates, vibrations to measure physical properties, and more.
Download or read book Nondestructive Testing and Evaluation of Fiber Reinforced Composite Structures written by Shuncong Zhong and published by Springer Nature. This book was released on 2022-04-01 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a detailed description of the most common nondestructive testing(NDT) techniques used for the testing and evaluation fiber-reinforced composite structures, during manufacturing and/or in service stages. In order to facilitate the understanding and the utility of the different NDT techniques presented, the book first provides some information regarding the defects and material degradation mechanisms observed in fiber-reinforced composite structures as well as their general description and most probable causes. It is written based on the extensive scientific research and engineering backgrounds of the authors in the NDT and structural health monitoring (SHM) of structural systems from various areas including electrical, mechanical, materials, civil and biomedical engineering. Pursuing a rigorous approach, the book establishes a fundamental framework for the NDT of fiber-reinforced composite structures, while emphasizing on the importance of technique’s spatial resolution, integrated systems analysis and the significance of the influence stemming from the applicability of the NDT and the physical parameters of the test structures in the selection and utilization of adequate NDT techniques. The book is intended for students who are interested in the NDT of fiber-reinforced composite structures, researchers investigating the applicability of different NDT techniques to the inspections of structural systems, and NDT researchers and engineers working on the optimization of NDT systems for specific applications involving the use of fiber-reinforced composite structures.
Download or read book Concrete Repair Rehabilitation and Retrofitting written by M. Alexander and published by CRC PressI Llc. This book was released on 2006-01-01 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: The First International Conference on Concrete Repair, Rehabilitation and Retrofitting (ICCRRR 2005) was held in Cape Town, South Africa, in November 2005. The conference was a collaborative venture by researchers from the South African Research Programme in Concrete Materials (based at the Universities of Cape Town and The Witwatersrand) and The Construction Materials Section at Leipzig University in Germany. The conference focused on appropriate repairing, maintaining, rehabilitating, and, if necessary, retrofitting existing infrastructure with a view to extending its life and maximising its economic return.
Download or read book Application of Imaging Techniques to Mechanics of Materials and Structures Volume 4 written by Tom Proulx and published by Springer Science & Business Media. This book was released on 2012-08-15 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This the fourth volume of six from the Annual Conference of the Society for Experimental Mechanics, 2010, brings together 58 chapters on Application of Imaging Techniques to Mechanics of Materials and Structure. It presents findings from experimental and computational investigations involving a range of imaging techniques including Recovery of 3D Stress Intensity Factors From Surface Full-field Measurements, Identification of Cohesive-zone Laws From Crack-tip Deformation Fields, Application of High Speed Digital Image Correlation for Vibration Mode Shape Analysis, Characterization of Aluminum Alloys Using a 3D Full Field Measurement, and Low Strain Rate Measurements on Explosives Using DIC.
Download or read book Recent Advances in Experimental Mechanics written by E.E. Gdoutos and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 71 papers presented at the symposium on “Recent Advances in Experimental Mechanics” which was organized in honor of Professor Isaac M. Daniel. The symposium took place at Virginia Polytechnic Institute and State University on th June 23-28, 2002, in conjunction with the 14 US National Congress of Applied Mechanics. The book is a tribute to Isaac Daniel, a pioneer of experimental mechanics and composite materials, in recognition of his continuous, original, diversified and outstanding contributions for half a century. The book consists of invited papers written by leading experts in the field. It contains original contributions concerning the latest developments in experimental mechanics. It covers a wide range of subjects, including optical methods of stress analysis (photoelasticity, moiré, etc.), composite materials, sandwich construction, fracture mechanics, fatigue and damage, nondestructive evaluation, dynamic problems, fiber optic sensors, speckle metrology, digital image processing, nanotechnology, neutron diffraction and synchrotron radiation methods. The papers are arranged in the following nine sections: Mechanical characterization of material behavior, composite materials, fracture and fatigue, optical methods, n- destructive evaluation, neutron diffraction and synchrotron radiation methods, hybrid methods, composite structures, and structural testing and analysis.
Download or read book Friction Stir Welding and Processing written by Rajiv S. Mishra and published by ASM International. This book was released on 2007-01-01 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the rapidly growing area of friction stir welding. It also addresses the use of the technology for other types of materials processing, including superplastic forming, casting modification, and surface treatments. The book has been prepared to serve as the first general reference on friction stir technology,. Information is provided on tools, machines, process modeling, material flow, microstructural development and properties. Materials addressed include aluminum alloys, titanium alloys, steels, nickel-base alloys, and copper alloys. The chapters have been written by the leading experts in this field, representing leading industrial companies and university and government research insititutions.
Download or read book Manual on Experimental Methods for Mechanical Testing of Composites written by R. Pendleton and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: References Liquid-metal strain gages can be fabricated in either single- or delta-rosette configurations. Their main advantages are their low stiffness (essential for 1. Beatty, M.F. and Chewning, S. W., "Numerical Analysis of the Reinforcement Effect of a Strain Gage Applied to a Soft use on composites with soft, elastomeric matrices) Material," Int. J. Eng. Sci., 17, 907-915 (1979). and high elongation (at least 50 percent). Their prin 2. Pugin, V.A., "Electrical Strain Gauges for Measuring Large cipal disadvantages are a short shelf life and a Deformations," Soviet Rubber Industry, 19 (1), 23-26 (1960). nonlinear calibration curve. 3. Janssen, M.L. and Walter, J.D., "Rubber Strain Measurements in Bias, Belted Bias and Radial Ply Tires," J. Coated Fibrous Mat., 1, 102-117 (1971). 4. Patel, H.P., Turner, J.L., and Walter, J.D., "Radial Tire Cord-Rubber Composite," Rubber Chem. and Tech., 49, Acknowledgments 1095-1110 (1976). 5. Stone, J.E., Madsen, N.H., Milton, J.L., Swinson, W.F., and Turner, J.L., "Developments in the Design and Use of Liquid-Metal Strain Gages," EXPERIMENTAL MECHANICS, 23, The author acknowledges helpful suggestions by 129-139 (1983). Dr. Joseph D. Walter of Firestone Central Research 6. Whitney, R.J., "The Measurement of Volume Changes in Human Limbs, " J. Physiology, 121, 1-27 (1953).
Download or read book Proceedings of the 21st International Symposium on High Voltage Engineering written by Bálint Németh and published by Springer Nature. This book was released on 2019-11-27 with total page 1569 pages. Available in PDF, EPUB and Kindle. Book excerpt: High voltage engineering is extremely important for the reliable design, safe manufacture and operation of electric devices, equipment and electric power systems. The 21st International Symposium on High Voltage Engineering, organized by the 90 years old Budapest School of High Voltage Engineering, provides an excellent forum to present results, advances and discussions among engineers, researchers and scientists, and share ideas, knowledge and expertise on high voltage engineering. The proceedings of the conference presents the state of the art technology of the field. The content is simultaneously aiming to help practicing engineers to be able to implement based on the papers and researchers to link and further develop ideas.
Download or read book Experimental Mechanics written by I. M. Allison and published by Taylor & Francis US. This book was released on 1998 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt:
