Download or read book Personalized Hip and Knee Joint Replacement written by Charles Rivière and published by Springer Nature. This book was released on 2020-06-30 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book describes and illustrates the surgical techniques, implants, and technologies used for the purpose of personalized implantation of hip and knee components. This new and flourishing treatment philosophy offers important benefits over conventional systematic techniques, including component positioning appropriate to individual anatomy, improved surgical reproducibility and prosthetic performance, and a reduction in complications. The techniques described in the book aim to reproduce patients’ native anatomy and physiological joint laxity, thereby improving the prosthetic hip/knee kinematics and functional outcomes in the quest of the forgotten joint. They include kinematically aligned total knee/total hip arthroplasty, partial knee replacement, and hip resurfacing. The relevance of available and emerging technological tools for these personalized approaches is also explained, with coverage of, for example, robotics, computer-assisted surgery, and augmented reality. Contributions from surgeons who are considered world leaders in diverse fields of this novel surgical philosophy make this open access book will invaluable to a wide readership, from trainees at all levels to consultants practicing lower limb surgery

Download or read book Total Hip Replacement written by Vaibhav Bagaria and published by BoD – Books on Demand. This book was released on 2018-11-07 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: The incidence of total hip arthroplasty is increasing in number because of successful outcomes. Although technically challenging, once mastered a hip replacement is one of the most gratifying surgeries for both patient and surgeon. This book covers some of the most important aspects of hip replacement surgery. These include preoperative planning, anesthesia, classification systems, management of proximal femur fractures, anterior approach, complications, and rehabilitation aspects of hip arthroplasty. The book is intended for arthroplasty surgeons, anesthetists, and physical therapists who will find the book useful in parts and as a whole if they deal with arthroplasty cases on a regular basis. Experience-based narration of various subjects by authors ensures that first-hand experience is passed on to readers in a simple, easy-to-understand manner.

Download or read book Handbook of Robotic and Image Guided Surgery written by Mohammad Hossein Abedin Nasab and published by Elsevier. This book was released on 2019-09-25 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Robotic and Image-Guided Surgery provides state-of-the-art systems and methods for robotic and computer-assisted surgeries. In this masterpiece, contributions of 169 researchers from 19 countries have been gathered to provide 38 chapters. This handbook is 744 pages, includes 659 figures and 61 videos. It also provides basic medical knowledge for engineers and basic engineering principles for surgeons. A key strength of this text is the fusion of engineering, radiology, and surgical principles into one book. - A thorough and in-depth handbook on surgical robotics and image-guided surgery which includes both fundamentals and advances in the field - A comprehensive reference on robot-assisted laparoscopic, orthopedic, and head-and-neck surgeries - Chapters are contributed by worldwide experts from both engineering and surgical backgrounds

Download or read book Joint Arthroplasty written by Shinichi Imura and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introduction of total joint arthroplasty throughout the world has contributed manifold benefits to patients who suffer from joint diseases. Concurrently, however, there has been an increase in revision surgery. Many orthopedic surgeons agree that durability of prostheses is an eternal problem. In particular, periprosthetic osteolysis recently has been identified as one of the serious problems affecting prosthetic dura bility. To improve durability, osteolysis and many other problems must be investi gated and solved both experimentally and clinically with respect to such aspects as prosthetic material, design, and biological and biomechanical behavior. This book comprises 37 papers that were presented by orthopedic surgeons and biomedical engineers at the 28th Annual Meeting of the Japanese Society for Replace ment Arthroplasty, held in March 1998 in Kanazawa, Japan. The volume is thus a compilation of the latest knowledge about the pathogenesis and reduction of osteolysis and wear, newly developed total hip prostheses, and other current topics of total knee arthroplasty. We earnestly hope that this book will be of benefit to clinicians and researchers, and that it will contribute to the creation of more durable total joint prostheses in the future. SHINICHI IMURA v Contents Preface .................... '" .. .. .. ... . .. .. .. . ... .. . . .. . ... . . .. . V List of Contributors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XI . . . . . . . . . . . . Part 1 Wear and Pathogenesis of Osteolysis Friction and Wear of Artificial Joints: A Historical Review N. AKAMATSU ................................................ , 3 Matrix Degradation in Osteoclastic Bone Resorption Under Pathological Conditions .

Download or read book Low Friction Arthroplasty of the Hip written by J. Charnley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: The theme of this work is the application of the engmeermg theory of frictional torque to total hip replacement. The author adhered tenaciously to this theory, involving the use of a small-diameter femoral head, throughout the epoch when the large-diame ter, metal-to-metal design dominated the field. During that considerable period general satisfaction with the early results rendered criticisms of the large-diameter head unwelcome. There was a formidable array of counter criticism: the small head would pierce a film of synovial fluid; the small head would wear the socket too rapidly; the small head would always have a high risk of dislocation; detachment of the trochanter, to achieve precise orientation for the small head, was unacceptable. But all these objections have now been largely overcome. Lubrication of high molecular weight polyethylene (HMWP) on metal is now accepted as being mainly by the boundary regime with thick fluid films playing no part. We now know that HMWP can indeed tolerate the very high stresses imposed by the small head and in tribological theory there may even be some advantage in high stress. Dislocation is now known not to be an automatic sequel to the small head.

Download or read book Minimally Invasive Surgery in Total Hip Arthroplasty written by Joachim Pfeil and published by Springer Science & Business Media. This book was released on 2010-04-16 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent years have witnessed a trend toward the use of minimally invasive techniques in all areas of orthopedic surgery, including hip replacement. This book aims to provide a comprehensive guide to the use of minimally invasive surgery in total hip arthroplasty. The four commonly employed approaches – anterior, anterolateral OCM, anterolateral supine, and posterior – are described in detail with the aid of high-quality illustrations. For each approach, clear guidance is offered on patient selection, patient positioning, surgical procedure, postsurgical care, and rehabilitation. Potential complications and the advantages and disadvantages of each option are carefully weighed up, and experts also present their personal experiences, outcomes, and success rates with the different approaches. The book concludes by discussing future trends in hip arthroplasty.

Download or read book The CORAIL Hip System written by Jean-Pierre Vidalain and published by Springer Science & Business Media. This book was released on 2011-06-06 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Corail® Hip System was developed in 1986 as an innovative solution for hip arthroplasty and has since become one of the most used hip systems in the world. This book is designed as a practical manual to primary and revision arthroplasty that will serve both as a reference for surgeons in training and as a source of information, tips and tricks for the more experienced who wish to learn from the cases of other surgeons. The book is divided into three main parts. The first discusses everything that is practical about the system, including the surgical technique, treatment of complications, and the results achieved in large cohorts of patients. The second part is devoted to the important issues of surgical approach, bearing options, acetabular preparation and, cup orientation and fixation. The final part focuses on patient management and includes a collection of standard and complex clinical cases to which surgeons can refer when planning surgery.

Download or read book The Unhappy Total Knee Replacement written by Michael T. Hirschmann and published by Springer. This book was released on 2015-09-15 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the need for improved diagnostic and treatment guidelines for patients in whom total knee arthroplasty (TKA) has had an unsatisfactory outcome. It opens by discussing the basics of TKA and the various causes of failure and pain. Diagnostic aspects are considered in detail, with attention to advances in clinical investigation, laboratory analysis and in particular, imaging techniques. In addition, helpful state of the art diagnostic algorithms are presented. Specific pathology-related treatment options, including conservative approaches and salvage and revision TKA strategies, are then explained, with identification of pitfalls and key points. A series of illustrative cases cover clinical scenarios frequently encountered in daily clinical practice. The evidence-based, clinically focused guidance provided in this book, written by internationally renowned experts, will assist surgeons in achieving the most effective management of these challenging cases.

Download or read book Total Knee Arthroplasty written by James Alan Rand and published by Lippincott Williams & Wilkins. This book was released on 1993 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive reference on total knee arthroplasty describes all surgical techniques and prosthetic designs for primary and revision arthroplasty, discusses every aspect of patient selection, preoperative planning, and intraoperative and postoperative care.

Download or read book Radiologic Guide to Orthopedic Devices written by Tim B. Hunter and published by Cambridge University Press. This book was released on 2017-05-11 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference on radiologic appearance, uses and complications of orthopedic devices, for radiologists, orthopedists, physicians, and students.

Download or read book Complex Cases in Total Knee Arthroplasty written by Alfred J. Tria and published by Springer. This book was released on 2018-02-20 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering both primary and revision total knee arthroplasty (TKA), each technique-oriented chapter in this book opens with a clinical case and an overview of the challenges and multiple options for management, and each section within the chapter will describe the physical exam, surgical approach, clinical outcome and recent supporting literature. Chapters will utilize bullet points for quick reference and plentiful intra-operative photos to illustrate the various techniques described. Part one covers primary TKA, with cases demonstrating management strategies for the varus and valgus knee, flexion contracture, patellofemoral arthritis, and extra-articular deformity, among others, while part two covers revision TKA, with cases demonstrating acute infection, flexion and global instability, severe tibial and femoral bone loss, and periprosthetic fracture, among others. Written and edited by experts in the field, Complex Cases In Total Knee Arthroplasty: A Collection of Current Techniques will be a useful reference for orthopedic surgeons, residents and fellows as well as sports medicine specialists and anyone involved in surgical care of the knee.

Download or read book 3D Printing for the Radiologist E Book written by Nicole Wake and published by Elsevier Health Sciences. This book was released on 2021-05-27 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, yet concise, 3D Printing for the Radiologist presents an overview of three-dimensional printing at the point of care. Focusing on opportunities and challenges in radiology practice, this up-to-date reference covers computer-aided design principles, quality assurance, training, and guidance for integrating 3D printing across radiology subspecialties. Practicing and trainee radiologists, surgeons, researchers, and imaging specialists will find this an indispensable resource for furthering their understanding of the current state and future outlooks for 3D printing in clinical medicine. - Covers a wide range of topics, including basic principles of 3D printing, quality assurance, regulatory perspectives, and practical implementation in medical training and practice. - Addresses the challenges associated with 3D printing integration in clinical settings, such as reimbursement, regulatory issues, and training. - Features concise chapters from a team of multidisciplinary chapter authors, including practicing radiologists, researchers, and engineers. - Consolidates today's available information on this timely topic into a single, convenient, resource.

Download or read book The SAGES ERAS Society Manual of Enhanced Recovery Programs for Gastrointestinal Surgery written by Liane S. Feldman and published by Springer. This book was released on 2015-08-31 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a comprehensive, up to date and practical approach to creating an ERAS program for GI surgery. The first sections review the evidence underlying individual elements of ERAS, including evidence from laparoscopic procedures when available or pointing to evidence gaps where more research is required. These are written by experts in the field, including surgeons, anesthesiologists, nurses, and physiotherapists. The format is in the style of a narrative review, with narrative evidence review, and concluding with a table with “take home messages” and 3-5 key references for readers interested in more depth in each topic. Each chapter also addresses management of common complications and patient selection or exceptions. Subsequent chapters address practical concerns, including creation of a pathway team, project management and engaging administration. Experts contribute real-world examples of their pathways for a variety of procedures, including colorectal surgery, bariatric surgery, upper GI and hepatobiliary surgery, enabling the user to have a starting point for creating their own programs. The SAGES Manual of Enhanced Recovery Programs for Gastrointestinal Surgery will be of great value to fully trained surgeons, anesthesiologists, nurses and administrators interested in initiating an ERAS program.

Download or read book Mastering Orthopedic Techniques Total Hip Arthroplasty written by Malhotra Rajesh and published by JAYPEE BROTHERS MEDICAL PUBLISHERS PVT. LTD.. This book was released on 2012-12-15 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: Doody Rating : 3 stars : Editor has put together well-known international Orthopaedic surgeons across the globe for writing down their experience in Hip Arthroplasty. There is extensive bibliography after each chapter which serve as reference material for further research. This book is from the series of Mastering Orthopedic Techniques. This is a comprehensive text for surgeons doing total hip replacement with step-by-step colored illustrations. Detailed descriptions for every possible surgical approach for total hip replacement. Topic covered in the chapters include cover cementation on both.

Download or read book Hip Biomechanics written by Shinichi Imura and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the arranged monograph based on the Hip Biomechanics Symposium held on November 1992 in Fukui, Japan. It consists of six major sections: loading, gait analysis, total hip arthroplasty, osteotomies, motion analysis, and stem designs for stability. The most important aim of the volume is to overview the current research outcomes in the biomechanical approaches to adult hip diseases. Each of these sections brings together many of the leading researchers in this field. The information found here will be of benefit to orthopedic surgeons and researchers in the related areas.

Download or read book Primary Total Knee Arthroplasty written by Alessandro Rozim Zorzi and published by BoD – Books on Demand. This book was released on 2018-05-23 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a compilation of topics related to primary total knee arthroplasty. The chapters cover, in a clear and didactic way, the current themes, written by experts from the area, from different parts of the world. Topics related to the three surgical phases (before surgery, during surgery, and after surgery) are discussed here. This is very important because the surgeon is not a "factory worker." First of all, it is a medicine doctor who has to feel and understand the particularities of each patient. Demographic studies show an aging population. Osteoarthritis and inflammatory diseases are becoming much more prevalent. In addition, a worldwide epidemic of trauma has led to the need for arthroplasties much more frequently. Therefore, total knee arthroplasty will be an increasingly important subject.

Download or read book Recent Advances in Arthroplasty written by Samo Fokter and published by BoD – Books on Demand. This book was released on 2012-01-27 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book was to offer an overview of recent insights into the current state of arthroplasty. The tremendous long term success of Sir Charnley's total hip arthroplasty has encouraged many researchers to treat pain, improve function and create solutions for higher quality of life. Indeed and as described in a special chapter of this book, arthroplasty is an emerging field in the joints of upper extremity and spine. However, there are inborn complications in any foreign design brought to the human body. First, in the chapter on infections we endeavor to provide a comprehensive, up-to-date analysis and description of the management of this difficult problem. Second, the immune system is faced with a strange material coming in huge amounts of micro-particles from the tribology code. Therefore, great attention to the problem of aseptic loosening has been addressed in special chapters on loosening and on materials currently available for arthroplasty.