Download or read book Fuels and Lubricants Handbook written by and published by ASTM International. This book was released on with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Industrial Tribology written by Theo Mang and published by John Wiley & Sons. This book was released on 2011-01-19 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrating very interesting results from the most important R & D project ever made in Germany, this book offers a basic understanding of tribological systems and the latest developments in reduction of wear and energy consumption by tribological measures. This ready reference and handbook provides an analysis of the most important tribosystems using modern test equipment in laboratories and test fields, the latest results in material selection and wear protection by special coatings and surface engineering, as well as with lubrication and lubricants. This result is a quick introduction for mechanical engineers and laboratory technicians who have to monitor and evaluate lubricants, as well as for plant maintenance personnel, engineers and chemists in the automotive and transportation industries and in all fields of mechanical manufacturing industries, researchers in the field of mechanical engineering, chemistry and material sciences.

Download or read book Vehicle and Automotive Engineering 2 written by Károly Jármai and published by Springer. This book was released on 2018-05-09 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the second Vehicle Engineering and Vehicle Industry conference, reflecting the outcomes of theoretical and practical studies and outlining future development trends in a broad field of automotive research. The conference’s main themes included design, manufacturing, economic and educational topics.

Download or read book Lubricant Additives written by Leslie R. Rudnick and published by CRC Press. This book was released on 2017-07-12 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: This indispensable book describes lubricant additives, their synthesis, chemistry, and mode of action. All important areas of application are covered, detailing which lubricants are needed for a particular application. Laboratory and field performance data for each application is provided and the design of cost-effective, environmentally friendly technologies is fully explored. This edition includes new chapters on chlorohydrocarbons, foaming chemistry and physics, antifoams for nonaqueous lubricants, hydrogenated styrene–diene viscosity modifiers, alkylated aromatics, and the impact of REACh and GHS on the lubricant industry.

Download or read book Biodiesel Combustion Performance and Emissions Characteristics written by Semakula Maroa and published by Springer Nature. This book was released on 2020-07-10 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on biodiesel combustion, including biodiesel performance, emissions and control. It brings together a range of international research in combustion studies in order to offer a comprehensive resource for researchers, students and academics alike. The book begins with an introduction to biodiesel combustion, followed by a discussion of NOx formation routes. It then addresses biodiesel production processes and oil feedstocks in detail, discusses the physiochemical properties of biodiesel, and explores the benefits and drawbacks of these properties. Factors influencing the formation of emissions, including NOx emissions, are also dealt with thoroughly. Lastly, the book discusses the mechanisms of pollution and different approaches used to reduce pollutants in connection with biodiesel. Each approach is considered in detail, and diagrams are provided to illustrate the points in line with industry standard control mechanisms.

Download or read book Applied Mechanics written by Liangchi Zhang and published by World Scientific. This book was released on 2002 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Jointly organized by The National Committee of Applied Mechanics, IEAust, The University of Sydney; sponsored by The University of Sydney, Asian Office of Aerospace Research and Development, Air Force Office of Scientific Research USA"--Page v./Includes bibliographical references and index.

Download or read book Fuels and Fuel Additives written by S. P. Srivastava and published by John Wiley & Sons. This book was released on 2014-01-16 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines all stages of fuel production, from feedstocks to finished products Exploring chemical structures and properties, this book sheds new light on the current science and technology of producing energy efficient and environmentally friendly fuels. Moreover, it explains the role of fuel-additives in the production cycle. This expertly written and organized guide to fuels and fuel-additives also presents requirements, rules and regulations, including US and EU standards governing automotive emissions, fuel quality and specifications, alternate fuels, biofuels, antioxidants, deposit control detergents/dispersants, stabilizers, corrosion inhibitors, and polymeric fuel-additives. Fuels and Fuel-Additives covers all stages and facets of the production of engine fuels as well as heating and fuel oils. The book begins with a quick portrait of the future of fuels and fuel production. Then, it sets forth the regulations controlling exhaust gas emissions and fuel quality from around the world. Next, the book covers: Processing of engine fuels derived from crude oil, including the production of blending components Production of alternative fuels Fuel-additives for automotive engines Blending of fuels Key properties of motor fuels and their effects on engines and the environment Aviation fuels The final chapter of the book deals with fuel oils and marine fuels. Each chapter is extensively referenced, providing a gateway to the primary and secondary literature in the field. At the end of the book, a convenient glossary defines all the key terms used in the book. Examining the full production cycle from feedstocks to final products, Fuels and Fuel-Additives is recommended for students, engineers, and scientists working in fuels and energy production.

Download or read book Handbook of Lubrication and Tribology written by George E. Totten and published by CRC Press. This book was released on 2006-04-06 with total page 1219 pages. Available in PDF, EPUB and Kindle. Book excerpt: When it was first published some two decades ago, the original Handbook of Lubrication and Tribology stood on technology's cutting-edge as the first comprehensive reference to assist the emerging science of tribology lubrication. Later, followed by Volume II, Theory and Design and Volume III, Monitoring, Materials, Synthetic Lubricants, and Ap

Download or read book Energy Research Abstracts written by and published by . This book was released on 1991-10 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Significance of Tests for Petroleum Products written by Salvatore J. Rand and published by ASTM International. This book was released on with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 4th Miami International Conference on Alternative Energy Sources 14 16 December 1981 Miami Beach Florida written by T. Nejat Veziroğlu and published by . This book was released on 1982 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Biodiesel Handbook written by Gerhard Knothe and published by Elsevier. This book was released on 2015-08-13 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this invaluable handbook covers converting vegetable oils, animal fats, and used oils into biodiesel fuel. The Biodiesel Handbook delivers solutions to issues associated with biodiesel feedstocks, production issues, quality control, viscosity, stability, applications, emissions, and other environmental impacts, as well as the status of the biodiesel industry worldwide. - Incorporates the major research and other developments in the world of biodiesel in a comprehensive and practical format - Includes reference materials and tables on biodiesel standards, unit conversions, and technical details in four appendices - Presents details on other uses of biodiesel and other alternative diesel fuels from oils and fats

Download or read book Lubrication Corrosion and Wear written by United States. National Aeronautics and Space Administration Scientific and Technical Information Division and published by . This book was released on 1966 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Highway Safety Literature written by and published by . This book was released on 1977 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Guide to ASTM Test Methods for the Analysis of Petroleum Products and Lubricants written by R. A. Nadkarni and published by Astm International. This book was released on 2000 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes the essential elements of all analytical tests used to characterize petroleum products. The 350 plus entries are alphabetically arranged by chemical and physical properties, such as apparent viscosity, density, metal analysis, sulfur determination, vapor pressure, and water. Each entry co

Download or read book GB GB T GBT Chinese Standard English translated version Catalog003 written by CODEOFCHINA - Dr. Meng Yongye and published by Codeofchina Inc.. This book was released on 2018-05-04 with total page 3290 pages. Available in PDF, EPUB and Kindle. Book excerpt: All English-translated Chinese codes are available at: www.codeofchina.com

Download or read book Annual Index abstracts of SAE Technical Papers written by and published by . This book was released on 2005 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt: