Download or read book Diametral Tensile Strength Microhardness Surface Modulus and Surface Morphology of Novel Antibacterial Orthodontic Adhesives written by Jeffrey Harold Godel and published by . This book was released on 2016 with total page 61 pages. Available in PDF, EPUB and Kindle. Book excerpt: Objective: Prior to the advent of bonded orthodontic appliances each tooth was fitted with a band made from stainless steel. Traditionally they were cemented to the tooth with a zinc phosphate cement. This acted more as a luting agent then adding to the actual adherence of the band to the tooth. In addition, often times the cement would wash out and upon the band removal white spot lesions and or carious lesions were present. The development of glass monomer cements had a traumatic improvement over both the adhesion to the tooth and a diminishing of white spot lesions in part due to the release of fluoride. Since the advent of the acid-etch technique and the bonding of orthodontic brackets directly to the enamel various bonding adhesives were developed. The first and most popular bonding resins were chemical curing bonding systems. The general class of self-adhesive and/or self-etching orthodontic adhesives are of several types, including resin-modified cements, such as resin-modified glass ionomer cements, that exhibit self-adhesive properties to enamel, as well as self-etching primers that combine the conditioning and priming agents into one acidic, polymerizable composition for application to the tooth surface, and do not require separate etching and rinsing steps. Not only do resin modified glass ionomers have the benefit of chemically bonding to a clean and un-etched enamel surface, but these self-adhesive cements also release significant and continuous levels of fluoride ion. Recently investigators have explored adding antimicrobial agents in addition to fluoride in orthodontic adhesives. One such approach has been the addition of ZnO powder, a known compound with anti-microbial properties, to an orthodontic resin modified glass ionomer adhesive. It should also be noted that zinc ions and compounds have been shown to positively influence enamel remineralization and enhance apatite formation. The objective of this research is to evaluate the effect of the addition of an antimicrobial agent, zinc oxide powder, on selected mechanical properties of a resin modified glass ionomer orthodontic adhesive. Methods: A resin modified glass ionomer (Fuji Ortho LC), in its two-component, powder/liquid format were utilized in this study. Control specimens, according to manufacturer's directions for use, were prepared for both diametral tensile and microhardness testing with be prepared. Using the powder component provided in the marketed product; powder blends containing both 10 and 20 percent Zinc Oxide (by weight) will be added to the RMGI powder, and thoroughly mixed and blended to create a uniform powder blend. The mechanical testing will be performed on 8-10 disc specimens, approximately 6.2 mm diameter by 3.1 mm in height, using a standardized mixing and molds for each material. The specimens will be tested using the Instron 5569 testing machine at a crosshead speed of 0.75 mm/minute for DTS until failure occurs. Data was recorded in Newton's (N) force. The microhardness testing was performed on 12 disc specimens, approximately 6.2 mm diameter by 3.1 mm in height, using a standardized mixing and molds for each material. A CSM microindentation testing device was used to measure theVickers microhardness. The surface morphological evaluation of the specimens both control and experimental will be examined at 50 X magnification for comparison of surface characteristics and morphology. One-way ANOVA for comparison of time- and material-specific mean Vickers microhardness values and post hoc pair-wise comparisons was employed to assess statistically significant differences in the mean values (p
Download or read book Orthodontic Materials written by Wiliam A. Brantley and published by Thieme. This book was released on 2011-01-01 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this important new textbook all scientific and clinical aspects of orthodontic materials are described.Recent developments in science and technology have led to the introduction of a plethora of new orthodontic products. This work serves as an excellent source of information for a field that requires knowledge of basic elements of materials science, engineering, chemistry, and physics, as well as clinical orthodontics. The subject has been part of graduate orthodontic education for almost three decades. Besides servicing the orthodontic training programs, the book also - investigates the interactions of orthodontic materials with other dental materials as well as hard tissues in the oral cavity,- gives a background to allow for proper material selection for efficient orthodontic mechanics,- treats the issues of biocompatibility, cytotoxicity and mutagenicity of materials.
Download or read book Handbook of Bioceramics and Biocomposites written by Iulian Vasile Antoniac and published by Springer. This book was released on 2016-05-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook describes several current trends in the development of bioceramics and biocomposites for clinical use in the repair, remodelling, and regeneration of bone tissue. Comprehensive coverage of these materials allows fundamental aspects of the science and engineering to be seen in close relation to the clinical performance of dental and orthopaedic implants. Bioceramics and biocomposites appear to be the most dynamic area of materials development for both tissue engineering and implantable medical devices. Almost all medical specialties will continue to benefit from these developments, but especially dentistry and orthopaedics. In this Handbook, leading researchers describe the use of bionanomaterials to create new functionalities when interfaced with biological molecules or structures. Also described are technologies for bioceramics and biocomposites processing in order to fabricate medical devices for clinical use. Another important section of the book is dedicated to tissue regeneration with development of new matrices. A targeted or personalized treatment device reduces drug consumption and treatment expenses, resulting in benefits to the patient and cost reductions for public health systems. This authoritative reference on the state-of-the-art in the development and use of bioceramics and biocomposites can also serve as the basis of instructional course lectures for audiences ranging from advanced undergraduate students to post-graduates in materials science and engineering and biomedical engineering.
Download or read book Dental Composite Materials for Direct Restorations written by Vesna Miletic and published by Springer. This book was released on 2017-11-25 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers both basic scientific and clinically relevant aspects of dental composite materials with a view to meeting the needs of researchers and practitioners. Following an introduction on their development, the composition of contemporary composites is analyzed. A chapter on polymerization explains the setting reactions and light sources available for light-cured composites. The quality of monomer-to-polymer conversion is a key factor for material properties. Polymerization shrinkage along with the associated stress remains among the most challenging issues regarding composite restorations. A new classification of dental composites is proposed to offer more clinically relevant ways of differentiating between commercially available materials. A review of specific types of composites provides an insight into their key issues. The potential biological issues of dental composites are reviewed in chapters on elution of leachable substances and cariogenicity of resin monomers. Clinical sections focus on material placement, finishing procedures, and the esthetics and clinical longevity of composite restorations. Bonding to tooth tissues is addressed in a separate chapter, as is the efficiency of various composite repair methods. The final chapter discusses future perspectives on dental composite materials.
Download or read book Orthodontic Applications of Biomaterials written by Theodore Eliades and published by Woodhead Publishing. This book was released on 2016-11-22 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Orthodontic Applications of Biomaterials: A Clinical Guide reviews the applications of biomaterials and their effects on enamel preparation, bonding, bracket and archwire ligation, mechanotherapy, debonding, and long-term enamel structural, color, and surface effects. The book provides a step-by-step analysis of the phenomena occurring, their clinical importance, and their underlying cause without the use of complex mathematical or physical-chemical analyses, with the goal of providing 'digestible' evidence for the clinician. - Serves as a reference source of the spectrum of biomaterials used in orthodontics - Presents the most current evidence of state-of-the-art methods of materials research - Provides substantiation for the effects occurring during the materials' uses
Download or read book Materials for the Direct Restoration of Teeth written by John Nicholson and published by Woodhead Publishing. This book was released on 2016-09-01 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for the Direct Restoration of Teeth focuses on the important role teeth play in our lives and how biomaterials scientists are ensuring that new dental materials are functional and esthetic. As research in the field is shifting away from traditional materials like metal, and towards more advanced materials, such as resins and ceramics, this book on the subject of modern materials for the direct repair of teeth provides readers with a comprehensive reference. The most pertinent modern dental materials and their properties and applications for the direct restoration of teeth are presented, along with case examples and guidance notes making this book an essential companion for materials scientists and clinicians. - Provides comprehensive coverage of conventional and modern materials for direct restoration of teeth - Includes guidance notes and case examples to support dental clinicians in decision-making - Authored by a scientist and a clinician, the book provides a balanced and complete treatise of the subject
Download or read book Dental Caries written by Zhou Xuedong and published by Springer. This book was released on 2015-10-20 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a well-illustrated and comprehensive guide to the etiology, clinical manifestations, diagnosis, clinical management and prevention of dental caries. Current challenging problems in the field are analyzed and the latest research findings, presented. After an introductory chapter on tooth development, the relationships of biofilm and saliva to dental caries and the significance of the balance between demineralization and remineralization for the development of carious lesions are discussed. Subsequent chapters address the state of the art in diagnosis and treatment, the implications of disease burden for prevention and the association between systemic diseases and dental caries. Dental Caries: Principles and Management is intended for dental school students, practicing dentists and researchers in dentistry.
Download or read book BiodentineTM written by Imad About and published by Springer Nature. This book was released on 2021-10-20 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive guide to BiodentineTM, an innovative biocompatible and bioactive material based on pure tricalcium silicate that can permanently replace dentin and can also serve as a temporary enamel substitute. Although BiodentineTM has been widely used across the world for the past decade, this is the first book to be devoted to its properties, interactions with the soft and hard tissues, and its multiple clinical applications. The coverage encompasses applications in primary and permanent teeth, in specialties as diverse as restorative dentistry, endodontics, paediatric dentistry, dental traumatology, and prosthetic dentistry. BiodentineTM application both in vital pulp therapy and endodontic procedures is illustrated and clinical step by step protocols are provided. The book provides a detailed update on BiodentineTM use to preserve the pulp vitality in direct/indirect pulp capping, pulpotomy and irreversible pulpitis treatment. It also details BiodentineTM use for non-vital teeth treatment in indications such as root/furcation perforation repair, apexification as well as in regenerative endodontic procedures. BiodentineTM: Properties and Clinical Applications will be a rich source of guidance and information for all dentists as well as dental students and academics.
Download or read book Applications of Nanocomposite Materials in Dentistry written by Abdullah M. Asiri and published by Woodhead Publishing. This book was released on 2018-11-15 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applications of Nanocomposite Materials in Dentistry presents the study and developments of nano-composite materials for dental applications. Special emphasis is given to the issues related to dental bone regeneration using various types of nano-composite materials, issues of dental failure, antibacterial properties and dental implants. Topics are systematically arranged so that layman can also understand the fundamentals and applications of dental nanocomposites. The book offers a powerful source of exploration on the preparation, characteristics and specific uses of composites in the fields of applied chemistry and medical sciences. - Offers an historical overview of composites materials and their dentistry applications - Outlines the role of nanocomposites and nanotechnology in dentistry - Discusses the properties of nanocomposites for dental grafting, implants and bone tissues
Download or read book Nanobiomaterials in Clinical Dentistry written by Karthikeyan Subramani and published by Elsevier. This book was released on 2019-04-14 with total page 695 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanobiomaterials in Clinical Dentistry, Second Edition shows how a variety of nanomaterials are being used to solve problems in clinical dentistry. New nanomaterials are leading to a range of emerging dental treatments that utilize more biomimetic materials that more closely duplicate natural tooth structure (or bone, in the case of implants). The book's chapters discuss the advantages and challenges of using nanomaterials and include case studies to illustrate how a variety of materials are best used in research and practice. - Contains information from an interdisciplinary, international group of scientists and practitioners in the fields of nanomaterials, dental implants, medical devices and clinical practice - Presents a comprehensive reference on the subject that covers material fabrication and the use of materials for all major diagnostic and therapeutic dental applications--repair, restoration, regeneration, implants and prevention - Complements the editors' previous book on nanotechnology applications for dentistry
Download or read book Restorative Dental Materials written by Robert George Craig and published by Elsevier España. This book was released on 1997 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides treatment of dental materials, giving students fundamental information needed to understand the laboratory and clinical properties of the materials. The scientific base for the technical procedures and manipulation of materials is provided as well as the background required for discriminating selection of materials for dental practice. Selected problems are featured at the end of each chapter to help the student to apply the information to practical situations.
Download or read book Dental Materials and Their Selection written by William Joseph O'Brien and published by Quintessence Publishing (IL). This book was released on 1997 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1. A Comparison of Metals, Ceramics, and Polymers. -- 2. Physical Properties. -- 3. Color and Appearance. -- 4. Surface Phenomena and Adhesion to Tooth Structure. -- 5. Gypsum Products. -- 6. Polymers and Polymerizations: Denture Base Polymers. -- 7. Polymeric Restorative Materials: Composites and Sealants. -- 8. Abrasion, Polishing, and Bleaching. -- 9. Impression Materials. -- 10. Waxes. -- 11. Dental Cements. -- 12. Structure and Properties of Metals and Alloys. -- 13. Dental Amalgams. -- 14. Direct Gold Filling Materials. -- 15. Precious Metal Casting Alloys. -- 16. Alloys for Porcelain-Fused-to-Metal Restorations. -- 17. Casting. -- 18. High-Temperature Investments. -- 19. Base Metal Casting Alloys. -- 20. Orthodontic Wires. -- 21. Dental Porcelain. -- 22. Soldering, Welding, and Electroplating. -- 23. Dental Implant Materials.
Download or read book Restoration of Root Canal Treated Teeth written by Jorge Perdigão and published by Springer. This book was released on 2015-10-02 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive and up-to-date overview of the restoration of teeth retained through root canal treatment, from the perspective of adhesive dentistry. The challenge of adhesion to root dentin is first explained and guidance provided on assessment of the restorability of endodontically treated teeth. The types of prefabricated passive post are then described in detail. The advantages and disadvantages of each type are outlined, with identification of the factors that influence post selection. Further topics include the ferrule effect, evidence‐based clinical applications of fiber posts and new methods to lute fiber posts to the root canal without dentin adhesives. In addition, frequent myths are identified and dispelled. All aspects are illustrated with clinical and laboratory images, diagrams and high-resolution electron microscopy photographs.
Download or read book Dental Materials Science written by Rama Krishna Alla and published by . This book was released on 2013-01-30 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Endodontic Treatment Retreatment and Surgery written by Bobby Patel and published by Springer. This book was released on 2016-08-01 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides clear, concise guidance on a range of essential treatment strategies for the provision of reliable endodontic care. Practical clinical procedures are described step by step and key concepts emphasized with the aid of a wealth of high-quality illustrations and photographs. Examples of best practice are documented by means of clinical case examples, and the provision of concise tips and recommendations ensures that the reader will quickly be able to find solutions to any one of the myriad of endodontic challenges with which he or she may be confronted. In addition, the most relevant key literature is reviewed in order to support and reinforce the discussed clinical concepts. The described endodontic treatment strategies are all grounded in a sound scientific evidence base. The book should enable practitioners to manage any endodontic case from first principles and will be of value for both dental practitioners and endodontic trainees/specialists.
Download or read book Innovations in Biomedical Engineering written by Marek Gzik and published by Springer Nature. This book was released on 2022-05-31 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest developments in the field of biomedical engineering and includes practical solutions and strictly scientific considerations. The development of new methods of treatment, advanced diagnostics or personalized rehabilitation requires close cooperation of experts from many fields, including, among others, medicine, biotechnology and finally biomedical engineering. The latter, combining many fields of science, such as computer science, materials science, biomechanics, electronics not only enables the development and production of modern medical equipment, but also participates in the development of new directions and methods of treatment. The presented monograph is a collection of scientific papers on the use of engineering methods in medicine. The topics of the work include both practical solutions and strictly scientific considerations expanding knowledge about the functioning of the human body. We believe that the presented works will have an impact on the development of the field of science, which is biomedical engineering, constituting a contribution to the discussion on the directions of development of cooperation between doctors, physiotherapists and engineers. We would also like to thank all the people who contributed to the creation of this monograph—both the authors of all the works and those involved in technical works.
Download or read book Glass Ionomers in Dentistry written by Sharan K. Sidhu and published by Springer. This book was released on 2015-10-20 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise handbook covers all aspects of glass-ionomer cements, from the development of these materials in the early 1970s through to the current state of the art. Their physical, chemical, biological, and clinical properties are described as well as how their formulation and usage have evolved over time, giving rise to newer subcategories of the parent materials. Detailed coverage is provided on the clinical use of glass-ionomer cements in restorative and pediatric dentistry and in widely taught and practiced newer approaches, including atraumatic restorative treatment and minimal intervention dentistry. The authors are internationally acclaimed experts who present information in an easy-to-follow format that will appeal to readers. With the renewed worldwide quest for substitute materials for the more traditional amalgam, glass-ionomer cements have the potential for further development and may play a significant role in future trends.
