Download or read book Diagnostics and Reliability of Pipeline Systems written by Sviatoslav Timashev and published by Springer. This book was released on 2016-03-17 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains solutions to fundamental problems which arise due to the logic of development of specific branches of science, which are related to pipeline safety, but mainly are subordinate to the needs of pipeline transportation. The book deploys important but not yet solved aspects of reliability and safety assurance of pipeline systems, which are vital aspects not only for the oil and gas industry and, in general, fuel and energy industries , but also to virtually all contemporary industries and technologies. The volume will be useful to specialists and experts in the field of diagnostics/ inspection, monitoring, reliability and safety of critical infrastructures. First and foremost, it will be useful to the decision making persons —operators of different types of pipelines, pipeline diagnostics/inspection vendors, and designers of in-line –inspection (ILI) tools, industrial and ecological safety specialists, as well as to researchers and graduate students.
Download or read book Pipeline Reliability written by Roger F. De la Mare and published by . This book was released on 1980 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The aim of the work reported here was to determine the reliability of North Sea pipelines. During the period studied, only two incidents, which could qualify as pipeline failures in the context of this report, occurred in the North Sea giving rise to an average failure rate of 0.7 failures per annun per one thosand kilometres of pipeline and 95% chance that the true average failure rate lay in the interval of 0.067 to 2.50. Resulting from the paucity of these failures, the scope of the study was extended to encompass other major pipeline systems throughout the world to see if their failure rates were sufficiently similar, to those for North Sea pipelines, to give a better understanding of North Sea Pipeline failure rates. The major conclusions of this work were that: (a) there was sufficient similarity of failure rates for all pipeline systems, irrespective of the commodity conveyed and/(or) the environment, to permit a better understanding of North Sea Pipeline failures, (b) the failure rates of pipelines were diameter dependent, (c) approximately 50% of all pipeline failures could be attributed to factures external to and away from the pipeline, and (d) pipeline exhibit a "wear out" failure pattern and that this knowledge should be used to optimize surveillance, inspection and testing routines."
Download or read book Degradation Assessment and Failure Prevention of Pipeline Systems written by Gabriella Bolzon and published by Springer Nature. This book was released on 2020-09-10 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the results of the research project G5055 'Development of novel methods for the prevention of pipeline failures with security implications,' carried out in the framework of the NATO Science for Peace and Security program, and explores the lifecycle assessment of gas infrastructures. Throughout their service lives, pipelines transporting hydrocarbons are exposed to demanding working conditions and aggressive media. In long-term service, material aging increases the risk of damage and failure, which can be accompanied by significant economic losses and severe environmental consequences. This book presents a selection of complementary contributions written by experts operating in the wider fields of pipeline integrity; taken together, they offer a comprehensive portrait of the latest developments in this technological area.
Download or read book Pipeline Integrity written by Ramesh Singh and published by Gulf Professional Publishing. This book was released on 2017-04-25 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pipeline engineers, operators, and plant managers are responsible for the safety of pipelines, facilities, and staying on top of regulatory compliance and maintenance. However, they frequently need reference materials to support their decision, and many new pipeline engineers and plant managers are responsible for major repairs and decisions yet do not have the proper reference to set a holistic integrity plan in place. Pipeline Integrity, Second Edition delivers necessary pipeline inspection methods, identification of hazard mechanisms, risk and consequence evaluations, and repair strategies. Covering relevant standards and processes for risk, assessment, and integrity management, this go-to reference provides the principles that guide these concepts enhanced with more critical regulatory information and easier organization betwen liquid and gas pipelines. More detailed information is provided on asset reliability, including risk-based inspection and other inspection prioritizing tools such as value-driven maintenance and evidence-based asset management. Pipeline Integrity, Second Edition continues to provide engineers and plants managers a vital resource for keeping their pipelines and facilities safe and efficient. Set an integrity management plan and safe assessment program while properly characterizing impact of risk Get updated with new information on corrosion control, gas and liquid hydrocarbon transportation risk management and asset integrity management Understand and apply all the latest and critical oil and gas pipeline standards, both U.S. and international-based
Download or read book Non destructive Testing and Repair of Pipelines written by Evgeny N. Barkanov and published by Springer. This book was released on 2017-07-27 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes efficient and safe repair operations for pipelines, and develops new methods for the detection and repair of volumetric surface defects in transmission pipelines. It also addresses the physics, mechanics, and applications of advanced materials used for composite repair of corroded pipelines. Presenting results obtained in the European Commission’s INNOPIPES FRAMEWORK 7 programme, it develops long-range ultrasonic and phased array technologies for pipeline diagnostics, and explores their interactions with discontinuities and directional properties of ultrasonic antenna array. The book subsequently shares the results of non-destructive testing for different types of materials applications and advanced composite repair systems, and characterizes the mechanical properties by means of fracture methods and non-destructive techniques. In turn, the book assesses the currently available technologies for reinforcement of pipelines, drawing on the experience gai ned by project partners, and evaluates the recovery of the carrying capacity of pipeline sections with local corrosion damage by means of analytical and numerical procedures. It develops an optimization method based on the planning of experiments and surface techniques for advanced composite repair systems, before validating the numerical models developed and experimentally gauging the effectiveness of composite repair with the help of full-scale hydraulic tests.
Download or read book System Fault Diagnostics Reliability and Related Knowledge Based Approaches written by S.G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book System Reliability Assessment of Corroded Pipelines written by Zahiraniza Mustaffa and published by LAP Lambert Academic Publishing. This book was released on 2012 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'System Reliability Assessment of Offshore Pipelines' portrays the application of probabilistic methods in assessing the reliability of these structures subjected to corrosion. The analysis interprets corrosion data as random variables and probabilistic functions, through which uncertainties of corrosion inspection tool can be taken into account. The reliability of the pipeline is studied by treating the structure as an independent unit. The analysis is further elaborated for pipelines arrayed as a series system of units, with the consideration of length effects. A framework for the reliability-based maintenance model is also developed, aiming at optimizing the pipeline system operations. Herein, the analysis is mainly focused on improving the practice of releasing corrosion inhibitors into the pipeline. The use of inhibitors is considered to be the most applied maintenance practice among pipeline industries because of its simple mechanism to fight against corrosion. Last but not least, the research also looks into interpreting corrosion in space using theories on hydrodynamics.
Download or read book Pipeline Systems written by E.P. Evans and published by Springer. This book was released on 1992-03-31 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference provides a forum for exchange of technical and operational information across a wide range of pipeline activities. Various supply and distribution industries, and their service organisations, have traditionally approached pipeline systems from many different perspec tives. The organisers believe that significant benefits can be gained by enabling representatives from the oil, gas, water, chemical, power and related industries to present their latest ideas and methods. An awareness of these alternative methodologies and technologies should result in a more unified and coherent approach to each individual type of pipeline system. The overall theme of the conference is the optimisation of pipeline systems, through design analysis, component specification, operational strategies and performance evaluation, in order to minimise both risk and the lifetime cost of ownership. Wherever possible emphasis is given to important developing technologies with special consideration to use of computational equipment and methods. SYSTEMS APPROACH For the major activities of design, operation and performance; pipeline systems can be conveniently classified in terms of the systetV: components, constraints and objectives. These are described using fluid terminology, to suit' the majority of conference participants, as given below: Components consist of pumps and valves (controls), pipe networks (transmission and distribu tion), reservoirs (storage) and consumer demands (disturbances). The arrangement of these components, to form the system, must take into account the conflicting requirements of structural, hydraulic, and cost, performance.
Download or read book Pipeline Integrity Management Under Geohazard Conditions written by Mamdouh M. Salama and published by . This book was released on 2020-01-10 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on Pipeline Integrity Management Under Geohazard Conditions (PIMG), includes 42 peer-refereed papers prepared by key industry subject matter experts. The papers compile the results of extensive research as well as assemble pipeline operators' experiences in tackling geohazard challenges for both new and vintage pipelines. In addition to the experts' papers, the editors of the book prepared an introduction to each section that includes summary review of the different papers in the section. The papers are presented in 10 sections addressing all aspects of geohazard integrity management. The fi rst section highlights the geohazard impact on pipeline integrity. The next four sections focused on the geohazard demand and its management by addressing geohazard characterization, monitoring, management and mitigation. The following four sections focused on the strain capacity by addressing strain capacity predictions, management and monitoring. The last chapter tied both strain demand and capacity through structural reliability and risk assessment protocols. The information in this book is not only intended for use by pipeline designers and operators but it is expected to also be used by regulators and standards writing organizations. It is therefore, the intention of ASME to update this book on a regular basis as new data, case studies and advancement of the state of practice become available.
Download or read book Oil and Gas Pipelines written by R. Winston Revie and published by John Wiley & Sons. This book was released on 2015-04-20 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and detailed reference guide on the integrity and safety of oil and gas pipelines, both onshore and offshore Covers a wide variety of topics, including design, pipe manufacture, pipeline welding, human factors, residual stresses, mechanical damage, fracture and corrosion, protection, inspection and monitoring, pipeline cleaning, direct assessment, repair, risk management, and abandonment Links modern and vintage practices to help integrity engineers better understand their system and apply up-to-date technology to older infrastructure Includes case histories with examples of solutions to complex problems related to pipeline integrity Includes chapters on stress-based and strain-based design, the latter being a novel type of design that has only recently been investigated by designer firms and regulators Provides information to help those who are responsible to establish procedures for ensuring pipeline integrity and safety
Download or read book Techniques for Monitoring Structural Behaviour of Pipeline Systems written by Christopher Reed and published by American Water Works Association. This book was released on 2004 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This project did a thorough review of the potential techniques which could monitor the structural performance of operationally critical mains (those 30" or 760mm in diameter and larger) of potable water distribution systems. The objective was to increase effective pipeline management as it relates to predictive failure. Parameters studied were global, local and environmental monitoring and the technologies studies were continuous, remote and in-pipe sensing. Gathering data from range of different sensors(aircraft, satellites, within and on pipes) proved the most optimal, with the understanding that further study of newer methods is recommended.
Download or read book Pipeline Integrity Management System PIMS Using Bayesian Networks for Lifetime Extension written by Nurul Sa'aadah Sulaiman and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The majority of the world's offshore infrastructures are now showing the sign of aging and are approaching the end of their original design life. Their ability to withstand various operational and environmental changes have been the main concerns over the years. This is because the pipeline will still need to operate for a few more decades with increasing demand of oil and gas supply. To address the issues, an effective pipeline integrity management system is required to manage pipeline systems and to ensure the reliability and availability of the pipeline. The main goal is to identify, apply, and assess the applicability of the Bayesian network approach in evaluating the integrity of subsea pipelines that evolves with time. The study is aimed to specifically handle knowledge uncertainties and assist in the decision making of subsea pipeline integrity assessment. A static Bayesian network model was developed to compute the probability of pipeline condition and investigate the underlying factors that lead to pipeline damage. From the model, the most influential factors were identified and the sensitivity analysis demonstrated that the developed model was robust and accurate. The proposed model was then extended to develop a decision tool model using an Influence Diagram. The results from the proposed influence diagram were used to prioritize the maintenance scheme of the pipeline segments. Benefit to cost ratio was applied to determine the pipeline maintenance intervals. Dynamic Bayesian network was utilized to model timedependent deterioration of pipeline structural reliability. A good agreement with conventional structural reliability method is achieved. The present thesis has demonstrated the applicability and effectiveness of Bayesian network approach in the field of oil and gas. It is hoped that the proposed models can be applied by oil and gas pipeline practitioners to enhance the integrity and lifeltime of the oil and gas pipeline.
Download or read book Pipeline Pumping and Compression Systems written by Mo Mohitpour and published by Pipelines and Pressure Vessels. This book was released on 2008 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a comprehensive professional reference, training tool, and text covering all aspects of pipeline pumping and compression system design, configuration optimisation, performance and operation, in addition to the dynamic behaviour of all the piping and various elements comprising each system.
Download or read book Site Reliability Engineering written by Niall Richard Murphy and published by "O'Reilly Media, Inc.". This book was released on 2016-03-23 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The overwhelming majority of a software system’s lifespan is spent in use, not in design or implementation. So, why does conventional wisdom insist that software engineers focus primarily on the design and development of large-scale computing systems? In this collection of essays and articles, key members of Google’s Site Reliability Team explain how and why their commitment to the entire lifecycle has enabled the company to successfully build, deploy, monitor, and maintain some of the largest software systems in the world. You’ll learn the principles and practices that enable Google engineers to make systems more scalable, reliable, and efficient—lessons directly applicable to your organization. This book is divided into four sections: Introduction—Learn what site reliability engineering is and why it differs from conventional IT industry practices Principles—Examine the patterns, behaviors, and areas of concern that influence the work of a site reliability engineer (SRE) Practices—Understand the theory and practice of an SRE’s day-to-day work: building and operating large distributed computing systems Management—Explore Google's best practices for training, communication, and meetings that your organization can use
Download or read book Reliability and Maintainability of In Service Pipelines written by Mojtaba Mahmoodian and published by Gulf Professional Publishing. This book was released on 2018-06-13 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability and Maintainability of In-Service Pipelines helps engineers understand the best structural analysis methods and more accurately predict the life of their pipeline assets. Expanded to cover real case studies from oil and gas, sewer and water pipes, this reference also explains inline inspection and how the practice influences reliability analysis, along with various reliability models beyond the well-known Monte Carlo method. Encompassing both numerical and analytical methods in structural reliability analysis, this book gives engineers a stronger point of reference covering both pipeline maintenance and monitoring techniques in a single resource. - Provides tactics on cost-effective pipeline integrity management decisions and strategy for a variety of different pipes - Presents readers with rational tools for strengthening and rehabing existing pipelines - Teaches how to optimize materials selection and design parameters for designing future pipelines with a longer service life
Download or read book Reliability Based Integrity Management of Natural Gas Pipelines Subject to Spatio Temporal Corrosive Environment written by Keo-Yuan Wu and published by . This book was released on 2020 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pipeline integrity management refers to an approach of understanding and operating pipelines in a safe and reliable manner. In this work, firstly, a probabilistic predictive model for internal corrosion of natural gas pipelines subject to aqueous CO2/H2S environment has been proposed. The model regards uniform and pitting corrosion as two main corrosion mechanisms and has been calibrated with the experimental data in a deterministic framework. Methodologies of simulating and accounting for temporal and spatial variabilities of operating parameters have been proposed and applied to the model for field applications. The model has been validated against field data from eight wet gas gathering pipelines in a probabilistic framework. Secondly, a reinforcement learning (RL)-based maintenance scheduler has been proposed for pipeline maintenance optimization problems by leveraging the proposed predictive corrosion model and the Q-learning and Sarsa algorithms. A case study has shown the superiority of the proposed maintenance scheduler over the periodic maintenance policy in reducing the maintenance costs. Finally, the previous two parts of work have been integrated into a pipeline system integrity management software featuring pipeline health monitoring, corrosion prognosis, system-level failure analysis, sensor placement optimization, and inspection/maintenance optimization. A case study has been provided to demonstrate the capabilities of the software.
Download or read book NBS Special Publication written by and published by . This book was released on 1968 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:
