Download or read book Plastics Technology written by Christian Bonten and published by . This book was released on 2019-10-07 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introductory book covers the entire spectrum of plastics technology / engineering, from raw materials to finished plastic products. It is not just for university / college students in plastics technology and other engineering disciplines but also for beginners to the field in general. The interconnectivity between the different relevant knowledge areas of plastics technology, such as materials engineering, processing technology, and product development, is emphasized. A chapter "Plastics and the Environment" is also included, covering a topic (rightly) often of great concern to students and newcomers to the field. So includes numerous videos, conveniently linked via QR codes, to better demonstrate key processes visually.
Download or read book Plastics Technology Handbook Fourth Edition written by Manas Chanda and published by CRC Press. This book was released on 2006-12-19 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because the field of plastics is one of the fastest changing areas today, the need arises to offer relevant, comprehensive material on polymers. An established source of information on modern plastics, the Plastics Technology Handbook continues to provide up-to-date coverage on the properties, processing methods, and applications of polymers. Retaining the easy-to-follow structure of the previous editions, this fourth edition includes new topics of interest that reflect recent developments and lead to better insights into the molecular behavior of polymers. New to the Fourth Edition Advances in supramolecular polymerization, flame retardancy, polymer-based nanomedicines, and drug delivery The new concept of oxo-biodegradable polymers Broadened discussion on plastic foams and foam extrusion processes More information on the processing and applications of industrial polymers, including the emerging field of nanoblends Developments in polymer synthesis and applications, such as polymeric sensors, hydrogels and smart polymers, hyperbranched polymers, shape memory polymers, polymeric optical fibers, scavenger resins, polymer nanocomposites, polymerization-filled composites, and wood-polymer composites A state-of-the-art account of the various available methods for plastics recycling Advances in the use of polymers in packaging, construction, the automotive and aerospace industries, agriculture, electronics and electrical technology, biomedical applications, corrosion prevention, and sports and marine applications Plastics Technology Handbook, Fourth Edition thoroughly covers traditional industrial polymers and their processing methods as well as contemporary polymeric materials, recent trends, and the latest applications.
Download or read book Global Plastics Outlook Economic Drivers Environmental Impacts and Policy Options written by OECD and published by OECD Publishing. This book was released on 2022-02-22 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: While plastics are extremely useful materials for modern society, plastics production and waste generation continue to increase with worsening environmental impacts despite international, national and local policy responses, as well as industry commitments. The first of two reports, this Outlook intends to inform and support policy efforts to combat plastic leakage.
Download or read book Improving Markets for Recycled Plastics Trends Prospects and Policy Responses written by OECD and published by OECD Publishing. This book was released on 2018-05-24 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics have become one of the most prolific materials on the planet: in 2015 we produced about 380 million tonnes of plastics globally, up from 2 million tonnes in the 1950s. Yet today only 15% of this plastic waste is collected and recycled into secondary plastics globally each year. This ...
Download or read book Applied Plastics Engineering Handbook written by Myer Kutz and published by William Andrew. This book was released on 2016-09-15 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Plastics Engineering Handbook: Processing, Materials, and Applications, Second Edition, covers both the polymer basics that are helpful to bring readers quickly up-to-speed if they are not familiar with a particular area of plastics processing and the recent developments that enable practitioners to discover which options best fit their requirements. New chapters added specifically cover polyamides, polyimides, and polyesters. Hot topics such as 3-D printing and smart plastics are also included, giving plastics engineers the information they need to take these embryonic technologies and deploy them in their own work. With the increasing demands for lightness and fuel economy in the automotive industry (not least due to CAFÉ standards), plastics will soon be used even further in vehicles. A new chapter has been added to cover the technology trends in this area, and the book has been substantially updated to reflect advancements in technology, regulations, and the commercialization of plastics in various areas. Recycling of plastics has been thoroughly revised to reflect ongoing developments in sustainability of plastics. Extrusion processing is constantly progressing, as have the elastomeric materials, fillers, and additives which are available. Throughout the book, the focus is on the engineering aspects of producing and using plastics. The properties of plastics are explained, along with techniques for testing, measuring, enhancing, and analyzing them. Practical introductions to both core topics and new developments make this work equally valuable for newly qualified plastics engineers seeking the practical rules-of-thumb they don't teach you in school and experienced practitioners evaluating new technologies or getting up-to-speed in a new field. - Presents an authoritative source of practical advice for engineers, providing guidance from experts that will lead to cost savings and process improvements - Ideal introduction for both new engineers and experienced practitioners entering a new field or evaluating a new technology - Updated to include the latest technology, including 3D Printing, smart polymers, and thorough coverage of biopolymers and biodegradable plastics
Download or read book Developments in Plastics Technology 1 written by A. Whelan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the field of plastics technology, the process of extrusion is widespread and important. It is employed in the compounding and pelletising of plastics materials, in their conversion into products (such as profiles, pipe, hose, sheet, film or bottles) and in the coating of wires, cables, paper, board or foil. A major reason for its use is the screw extruder's ability to melt efficiently and pump continuously large amounts of plastics materials. The understanding of the melting/pumping operation of the extruder and the development of larger and faster-running machines so as to give higher outputs have been given great attention and the results have been widely published. However, the whole manufacturing technology for extruded products has also developed, particularly in recent years. This has occurred not only by the use of modern screw extruders, but also by the incorporation of improved process control systems, the better design of dies and extrudate handling machinery and by the utilisation of improved plastics materials and additives. It is the purpose of this book to present selected topics which contribute to, or exemplify, these developments in extrusion-based processes.
Download or read book Plastics Industry 4 0 written by Christian Hopmann and published by . This book was released on 2021-01-05 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a sophisticated insight into the development of the plastics industry in terms of digitalization and Industry 4.0. The background to these increasingly more important topics is discussed along with the prerequisite knowledge regarding process complexity and data acquisition to build the foundation of data driven digital processes. Furthermore, the facets of so-called cyber physical systems including their key components are discussed and illustrated using industrial application as well as scientific use cases.
Download or read book Developments in Plastics Technology 3 written by A. Whelan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the sheer size of the plastics industry, the title Developments in Plastics Technology now covers an incredibly wide range of subjects or topics. No single volume can survey the whole field in any depth and so what follows is therefore a series of chapters on selected topics. The topics were selected by us, the editors, because of their immediate relevance to the plastics industry. When one considers the materials produced and used by the modern plastics industry, there is a tendency to think of the commodity thermoplastics (such as poly(vinyl chloride) or polyethylene); the thermosetting materials are largely ignored. Because of this attitude we are very pleased to include in this volume a chapter which deals with the processing of a thermosetting material, i.e. the pultrusion of glass reinforced polyester. The extrusion of plastics is, of course, a very important subject but an aspect which is often overlooked is the need to remove volatile matter during processing: for this reason we have included a chapter on devolatilisation. Current industrial practice is towards materials modification and this attitude is reflected in the chapters on the transformation of ethylene vinyl acetate polymers and the use of wollastonite in two important thermoplastics. When assessing the performance of materials, there is a tendency to concentrate on short-term mechanical tests and ignore such topics as fatigue and longer-term testing. We are therefore very pleased to include a chapter on this subject.
Download or read book Recent Developments in Plastic Recycling written by Jyotishkumar Parameswaranpillai and published by Springer Nature. This book was released on 2021-10-01 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic and comprehensive account of the recent developments in the recycling of plastic waste material. It presents state-of-the-art procedures for recycling of plastics from different sources and various characterization methods adopted in analyzing their properties. In addition, it looks into properties, processing, and applications of recycled plastic products as one of the drivers for sustainable recycling plastics especially in developing countries. This book proves a useful reference source for both engineers and researchers working in composite materials science as well as the students attending materials science, physics, chemistry, and engineering courses.
Download or read book Developments in Plastics Technology 4 written by A. Whelan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the sheer size and scope of the plastics industry, the title Developments in Plastics Technology now covers an incredibly wide range of subjects or topics. No single volume can survey the whole field in any depth and what follows is, therefore, a series of chapters on selected topics. The topics were selected by us, the editors, because of their immediate relevance to the plastics industry. When one considers the advancements of the plastics processing machinery (in terms of its speed of operation and conciseness of control), it was felt that several chapters should be included which related to the types of control systems used and the correct usage of hydraulics. The importance of using cellular, rubber-modified and engineering-type plastics has had a major impact on the plastics industry and therefore a chapter on each of these subjects has been included. The two remaining chapters are on the characterisation and behaviour of polymer structures, both subjects again being of current academic or industrial interest. Each of the contributions was written by a specialist in that field and to them all, we, the editors, extend our heartfelt thanks, as writing a contribution for a book such as this, while doing a full-time job, is no easy task.
Download or read book Emerging Trends in Medical Plastic Engineering and Manufacturing written by Markus Schönberger and published by William Andrew. This book was released on 2016-01-06 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emerging Trends in Medical Plastic Engineering and Manufacturing gives engineers and materials scientists working in the field detailed insights into upcoming technologies in medical polymers. While plastic manufacturing combines the possibility of mass production and wide design variability, there are still opportunities within the plastic engineering field which have not been fully adopted in the medical industry. In addition, there are numerous additional challenges related to the development of products for this industry, such as ensuring tolerance to disinfection, biocompatibility, selecting compliant additives for processing, and more. This book enables product designers, polymer processing engineers, and manufacturing engineers to take advantage of the numerous upcoming developments in medical plastics, such as autoregulated volume-correction to achieve zero defect production or the development of 'intelligent' single use plastic products, and methods for sterile manufacturing which reduce the need for subsequent sterilization processes. Finally, as medical devices get smaller, the book discusses the challenges posed by miniaturization for injection molders, how to respond to these challenges, and the rapidly advancing prototyping technologies. - Provides a roadmap to the emerging technologies for polymers in the medical device industry, including coverage of 'intelligent' single use products, personalized medical devices, and the integration of manufacturing steps to improve workflows - Helps engineers in the biomedical and medical devices industries to navigate and anticipate the special requirements of this field with relation to biocompatibility, sterilization methods, and government regulations - Presents tactics readers can use to take advantage of rapid prototyping technologies, such as 3D printing, to reduce defects in production and develop products that enable entirely new treatment possibilities
Download or read book Industrial Applications of Renewable Plastics written by Michel Biron and published by William Andrew. This book was released on 2016-11-10 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Applications of Renewable Plastics: Environmental, Technological, and Economic Advances provides practical information to help engineers and materials scientists deploy renewable plastics in the plastics market. It explores the uses, possibilities, and problems of renewable plastics and composites to assist in material selection and rejection. The designer's main problems are examined, along with basic reminders that deal with structures and processing methods that can help those who are generally familiar with metals understand the unique properties of plastic materials. The book offers a candid overview of main issues, including conservation of fossil resources, geopolitical considerations, greenhouse effects, competition with food crops, deforestation, pollution, and disposal of renewable plastics. In addition, an overview of some tools related to sustainability (Life cycle assessments, CO2 emissions, carbon footprint, and more) is provided. The book is an essential resource for engineers and materials scientists involved in material selection, design, manufacturing, molding, fabrication, and other links in the supply chain of plastics. The material contained is of great relevance to many major industries, including automotive and transport, packaging, aeronautics, shipbuilding, industrial and military equipment, electrical and electronics, energy, and more. - Provides key, enabling information for engineers and materials scientists looking to increase the use of renewable plastic materials in their work - Presents practical guidance to assist in materials selection, processing methods, and applications development, particularly for designers more familiar with other materials, such as metals - Includes a candid discussion of the pros and cons of using renewable plastics, considering the technical, economic, legal, and environmental aspects
Download or read book Life Cycle Engineering of Plastics written by L. Lundquist and published by Elsevier. This book was released on 2001-01-23 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book adds much to the already evolving field of Design for Environment; but it goes far beyond most works on this subject by surrounding the central notions of life cycle assessment with a scientific body of knowledge and with a more practical slant reflecting the reality of the organizations in which product development occurs. Through a focus on plastic products, the authors show the importance of making ties between basic technical knowledge and the process of life cycle engineering. Their approach offers a practical, deliberate way to make ecologically and economically sensible decisions about product reuse and recycling and other critical dimensions of product life behavior. They demonstrate a positive approach to designing products that fits into a sustainable economy through down-to-earth cases. While the book focuses on the life cycle engineering of plastics, it is only a short step to other materials and products. Beyond contributing to the technology of life cycle engineering, this text adds to the growing body of knowledge that argues for an fundamentally new way of thinking about economic and social activity--a new paradigm for sustainable social and industrial problem solving. Industrial ecology is such a new system for thinking about and implementing sustainability that draws its core set of ideas from the ecological world. Industrial ecology brings to the surface the idea of interdependence among members of a community-- natural or economic, and notes the material cycles that are central to a stable ecosystem. The life cycle engineering framework, coupled with sound scientific knowledge of materials behavior as articulated in this book, makes a giant step towards bringing the model of industrial ecology into everyday practice." From the Preface by John R. Ehrenfeld Director, MIT Technology, Business and Environment Program Center for Technology, Policy, and Industrial Development
Download or read book Plastics End Use Applications written by Donald V. Rosato and published by Springer Science & Business Media. This book was released on 2011-08-04 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics End Use Applications is a SpringerBrief designed to keep professionals in the plastics industry abreast of key technical developments, business strategies and marketing initiatives in plastics and competitive materials that impact sales and usage. It is concisely focused on the five major competitive material areas–plastic, metal, paper and wood, rubber, and glass and ceramic–and how they interact in the twenty major plastic end-use market segments. For the global plastics professional, this book offers a way to enhance plastics technical and marketing insights. Plastics End Use Applications is of most value to manufacturing engineers, research and development professionals and general researchers interested in plastics and materials science.
Download or read book Recycling of Plastics Metals and Their Composites written by R.A. Ilyas and published by CRC Press. This book was released on 2021-12-27 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: Having a solid understanding of materials recycling is of high importance, especially due to the growing use of composites in many industries and increasingly strict legislation and concerns about the disposal of composites in landfills or by incineration. Recycling of Plastics, Metals, and Their Composites provides a comprehensive review of the recycling of waste polymers and metal composites. It provides the latest advances and covers the fundamentals of recycled polymers and metal composites, such as preparation, morphology, and physical, mechanical, thermal, and flame-retardancy properties. FEATURES Offers a state-of-the-art review of the recycling of polymer composites and metal composites for sustainability Describes a life-cycle analysis to help readers understand the true potential value and market for these recycled materials Details potential applications of recycled polymer and metal composites Includes the performance of natural fiber–reinforced recycled thermoplastic polymer composites under aging conditions and the recycling of multi-material plastics Covers recycling technologies, opportunities, and challenges for polymer-matrix composites This book targets technical professionals in the metal and polymer industries as well as researchers, scientists, and advanced students. It is also of interest to decision makers at material suppliers, recycled metal and polymer product manufacturers, and governmental agencies working with recycled metal and polymer composites.
Download or read book Advances in Polymer Processing 2020 written by Christian Hopmann and published by Springer Nature. This book was released on 2020-03-10 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the International Symposium on Plastics Technology, which was held on March 10, 2020 in Aachen, Germany, and was organised by the Institute for Plastics Processing (IKV) in Industry and Craft at RWTH Aachen University. Peer-reviewed by an international scientific committee, the conference proceedings comprise the papers presented by the international speakers. Topics covered include - circular economy- extrusion- lightweight technologies- simulation and digitisation - injection moulding- hybrid materials and additive manufacturing. In these fields, key themes for plastics technologies have been identified that will shape the face of research and industry for the next decade. In their contributions, the authors present the latest scientific findings, and discuss topical issues in plastics technologies. The symposium offered an inspiring forum for the exchange on research and innovation, for discussing urgent questions and providing impulses for the future of plastics technology.
Download or read book Feedstock Recycling of Plastic Wastes written by Jose Aguado and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of plastic materials has seen a massive increase in recent years, and generation of plastic wastes has grown proportionately. Recycling of these wastes to reduce landfill disposal is problematic due to the wide variation in properties and chemical composition among the different types of plastics. Feedstock recycling is one of the alternatives available for consideration, and Feedstock Recycling of Plastic Wastes looks at the conversion of plastic wastes into valuable chemicals useful as fuels or raw materials. Looking at both scientific and technical aspects of the recycling developments, this book describes the alternatives available. Areas include chemical depolymerization, thermal processes, oxidation and hydrogenation. Besides conventional treatments, new technological approaches for the degradation of plastics, such as conversion under supercritical conditions and coprocessing with coal are discussed. This book is essential reading for those involved in plastic recycling, whether from an academic or industrial perspective. Consultants and government agencies will also find it immensely useful.
