Download or read book Development of a Pavement Marking Striping Strategy for ODOT District 11 written by Tanvir Quasem and published by . This book was released on 2016 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research work evaluated four pavement marking materials installed on pavements at 11 test sites located at ODOT District 11. Fast dry traffic paint, polyester, epoxy and thermoplastic were the four marking materials installed at the sites across the district on two-lane and four-lane highways having a variety of pavement types, pavement geometries, and traffic volumes. The main focus was to evaluate fast dry traffic paint and polyester as a restriping material, while epoxy and thermoplastic were evaluated for a purpose of comparison. Most of the sites were located on two-lane roads in rural locations, with an average daily traffic (ADT) of less than 5,000 vehicles per day and an average daily truck traffic (ADTT) of less than 1,000 trucks per day. Only two four-lane sites (located along US 22 in Jefferson County) were included because of their high traffic levels and to facilitate the comparison between two-lane and four-lane roads. Marking materials were installed on a 2 mile road section. The test section was divided into 4 segments each with a 0.5 mile length. In order to evaluate the performance of polyester and fast-dry traffic paint as restriping materials, a 0.1-mile portion of the right edge line in the middle of Sections 1 and 4 was left intact so that both materials could be installed over the existing markings. For the remaining portion of the sections, polyester and fast-dry traffic paint were installed on bare pavement surfaces after the removal of the existing pavement markings. Epoxy and thermoplastic was installed after removing existing marking material. Centerlines were restriped with polyester at section 1 and paint at other sections. During a two year period, the pavement markings were evaluated in terms of dry retroreflectivity, daytime color and durability. A handheld Delta LTL-X retroreflectometer was used to measures pavement marking retroreflectivity in accordance with CEN and ASTM standards using a 30-m geometry to simulate the roadway being illuminated by the headlights of a car. A MiniScan XE Plus (Model 4500L) spectrocolorimeter was used to measure the daytime color of the markings. Durability was evaluated using a subjective rating as an integer on a scale of 0 (the material is completely missing) to 10 (where 100% of the material remains). Photographs were taken to document the condition of the markings for future reference. Laboratory testing was also conducted to examine the quality of the glass beads used during the marking installation. Finally, statistical analysis was performed on the initial and two-year field evaluation data using Minitab 17. Effect of various factors (such as the pavement type, line type, marking material and color, etc.) on the retroreflectivity performance of the pavement markings were determined. The service life of all marking materials was estimated using the linear and the power models for each line at all test sites using a minimum retroreflectivity value of 100 mcd/m2/lux. A Microsoft Excel macro was developed to handle the large amount of data involved in the analysis. Based on the analysis result different restriping strategies were proposed along with the cost analysis for the whole district. Material selection matrices were presented for the two-lane and multi-lane roadways which will help the district office in strategy development and decision making.
Download or read book Development of a Pavement Marking Material Matrix for ODOT District 11 written by Ala R. Abbas and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This study was initiated by ODOT to evaluate the performance of four pavement marking materials (fast dry traffic paint, polyester, extruded thermoplastic and epoxy) in order to determine which materials are most suitable for the environmental and traffic conditions in ODOT District 11, which contains mostly rural roads with relatively low traffic levels (ADT less than 5,000 vehicles per day) and some areas of mountainous terrain. The main focus of this study was to evaluate the performance of fast dry traffic paint and polyester as restriping materials; however, epoxy and thermoplastic were included in the evaluation for comparison purposes. The four materials were installed at 11 test sites distributed across the district on two-lane and four-lane highways having a variety of pavement types, pavement geometries, and traffic volumes. The performance of the pavement markings was evaluated in the field for a period of two years in terms of dry retroreflectivity, daytime color, and durability. Laboratory test procedures were also included to examine the quality of the glass beads used in this study. The field performance results were analyzed to determine the service life of the various marking materials. In addition, the results were used to estimate the life cycle cost of these materials and develop a material selection matrix for use in District 11. Based on the outcome of this study, it was recommended that District 11 continue to use epoxy on new asphalt and concrete surfaces and to use traffic paint for restriping applications. For two-lane roads with asphalt surfaces, it was recommended to restripe the edge lines every two years and restripe the centerlines every year. On selected roads with sharp curves that slope towards the Ohio River, it was recommended to restripe the centerlines as well as the edge lines on an annual basis to avoid run-off road crashes. For multi-lane roads with asphalt surfaces, it was recommended to restripe locations with low traffic and good pavement condition every two years and restripe all lines at locations with high traffic (ADT greater than or equal to 10,000 vehicles per day) or rough pavement condition (pavement condition rating (PCR) less than 80) every year. For all roads with concrete surfaces, it was recommended to restripe all lines every year regardless of the traffic level and pavement condition. One material that is increasingly being used in Ohio for striping and restriping applications on asphalt surfaces is spray thermoplastic. This material was not included in this study because it is not compatible with epoxy, which was previously installed on several of the test sites prior to the beginning of this project. Some districts reported favorable results from using spray thermoplastic. Therefore, District 11 is encouraged to look into using this less expensive material as an alternative for epoxy markings on new asphalt surfaces. It should be emphasized that the previous recommendations are specific to District 11 and may not be applicable to other ODOT districts due to variations in traffic levels, environmental conditions, and pavement marking material selection practices.
Download or read book AASHTO Guide for Design of Pavement Structures 1993 written by American Association of State Highway and Transportation Officials and published by AASHTO. This book was released on 1993 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design related project level pavement management - Economic evaluation of alternative pavement design strategies - Reliability / - Pavement design procedures for new construction or reconstruction : Design requirements - Highway pavement structural design - Low-volume road design / - Pavement design procedures for rehabilitation of existing pavements : Rehabilitation concepts - Guides for field data collection - Rehabilitation methods other than overlay - Rehabilitation methods with overlays / - Mechanistic-empirical design procedures.
Download or read book Gravel Roads written by Ken Skorseth and published by . This book was released on 2000 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this manual is to provide clear and helpful information for maintaining gravel roads. Very little technical help is available to small agencies that are responsible for managing these roads. Gravel road maintenance has traditionally been "more of an art than a science" and very few formal standards exist. This manual contains guidelines to help answer the questions that arise concerning gravel road maintenance such as: What is enough surface crown? What is too much? What causes corrugation? The information is as nontechnical as possible without sacrificing clear guidelines and instructions on how to do the job right.
Download or read book Guide for Pavement Friction written by and published by AASHTO. This book was released on 2008 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report contains guidelines and recommendations for managing and designing for friction on highway pavements. The contents of this report will be of interest to highway materials, construction, pavement management, safety, design, and research engineers, as well as others concerned with the friction and related surface characteristics of highway pavements.
Download or read book Synthesis of Highway Practice written by National Cooperative Highway Research Program and published by . This book was released on 1969 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Roundabouts written by Lee August Rodegerdts and published by Transportation Research Board. This book was released on 2010 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Report 672: Roundabouts: An Informational Guide - Second Edition explores the planning, design, construction, maintenance, and operation of roundabouts. The report also addresses issues that may be useful in helping to explain the trade-offs associated with roundabouts. This report updates the U.S. Federal Highway Administration's Roundabouts: An Informational Guide, based on experience gained in the United States since that guide was published in 2000.
Download or read book Roadside Design Guide written by American Association of State Highway and Transportation Officials. Task Force for Roadside Safety and published by . This book was released on 1989 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Newberg Dundee Transportation Improvement Project Bypass Element Location tier 1 Yamhill County written by and published by . This book was released on 2005 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Quality Management of Pavement Condition Data Collection written by Gerardo W. Flintsch and published by Transportation Research Board. This book was released on 2009 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Long term Pavement Marking Practices written by James Migletz and published by Transportation Research Board. This book was released on 2002 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Synthesis 306: Long-Term Pavement Marking Practices documents the current and best practices for managing pavement marking systems, identifies future needs, and addresses driver needs and methods of communicating information to drivers, selection criteria (e.g., reflectivity, pavement service life, wet weather performance), materials (e.g., color, durability, cost), specifications, construction practices, inventory management systems, and more.
Download or read book Urban Bikeway Design Guide Second Edition written by National Association of City Transportation Officials and published by Island Press. This book was released on 2014-03-24 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: NACTO's Urban Bikeway Design Guide quickly emerged as the preeminent resource for designing safe, protected bikeways in cities across the United States. It has been completely re-designed with an even more accessible layout. The Guide offers updated graphic profiles for all of its bicycle facilities, a subsection on bicycle boulevard planning and design, and a survey of materials used for green color in bikeways. The Guide continues to build upon the fast-changing state of the practice at the local level. It responds to and accelerates innovative street design and practice around the nation.
Download or read book Highway Research Abstracts written by and published by . This book was released on 1994 with total page 1006 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Strategies for Work Zone Transportation Management Plans written by Leverson Boodlal and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the ways a state department of transportation or other transportation agency can address work zone safety and other impacts is to develop and implement a Transportation Management Plan (TMP). The TRB National Cooperative Highway Research Program's NCHRP Research Report 945: Strategies for Work Zone Transportation Management Plans provides a practitioner-ready guidebook on how to select and implement strategies that improve safety and traffic operations in roadway construction work zones. Supplemental materials to the report include NCHRP Web-Only Document 276: Evaluating Strategies for Work ZoneTransportation Management Plans; fact sheets on ramp meter, reversible lane, and truck restrictions; and guidebook appendices.
Download or read book Improved Work Zone Design Guidelines and Enhanced Model of Travel Delays in Work Zones written by Helmut T. Zwahlen and published by . This book was released on 2006 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: The project focuses on two major issues - the improvement of current work zone design practices and an analysis of vehicle interarrival time (IAT) and speed distributions for the development of a digital computer simulation model for queues and travel delays in work zones. Important considerations in the development of work zone design guidelines include guidance, delineation, and the safety of workers and drivers. A nationwide survey of current work zone best practices was conducted. Based on the review of the existing ODOT guidelines, superior practices available in other states, relevant research, and professional judgment of personnel involved in work zone activities, a set of guidelines for work zone design are proposed. It is anticipated that these research findings will result in the better design of work zones which will minimize traffic delays and improve safety. In the second part of the project trailers, each using two Wavetronix microwave radar units in side-fire mode, were developed to nonintrusively measure traffic. The traffic was measured at six work zones sites with different types of lane configurations at different freeways in Ohio. Traffic on the road was also independently measured using video and radar, and the results compared to records from the trailers to verify that the trailers were measuring the traffic with reasonable accuracy. IAT data of successive vehicles in freeflowing traffic ahead of work zones were analyzed and IAT distributions were generated as a function of the traffic volume for each lane and relationships between traffic volumes and cumulative IAT distributions were established allowing a direct conversion from hourly traffic counts to corresponding cumulative IAT distributions. This conversion method produces fairly accurate cumulative IAT distributions for selected hourly traffic volumes. It was also found that the same cumulative IAT distribution can be used to model the free-flowing traffic at other freeway locations in Ohio, which means that the IAT distributions are portable and scalable and a microscopic digital computer simulation model based on queueing theory may be developed to investigate traffic delays in work zones.
Download or read book Distress Identification Manual for the Long term Pavement Performance Project written by and published by Strategic Highway Research Program (Shrp). This book was released on 1993 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guide for the Development of Bicycle Facilities written by and published by American Association of State Highway & Transportation Officials. This book was released on 1999 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
