Download or read book Designing Three Dimensional Nanoporous Metal Alloys for Selective Electrochemical Conversion Catalysis written by Swarnendu Chatterjee and published by . This book was released on 2020 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rising demands of clean energy owing to a burgeoning global population and deteriorating climate has given rise to new avenues of research in electrocatalysis focusing on extraction and storage of energy through electrochemical reactions. In contrast to heterogeneous catalysts, electrochemical catalysts often need to withstand harsh reaction environments with respect to electrolyte pH and applied overpotentials. The stability requirements constrain the breadth of applicable materials, limiting the viable catalysts to those composed of more noble metals, which are invariably more costly. The design of next generation electrocatalyst materials requires strategies to balance activity and stability while at the same time minimizing the utilization of expensive materials to limit costs. Open-framework nanocatalyst architectures show promise as they maximize surface area to volume ratios and their morphology and surface chemistry are readily tuned through controlled processing methodologies. Among the high aspect ratio, open-framework nanostructures, nanoporous metals obtained through dealloying offer a unique class of three dimensional electrode materials that are useful for a number of electrolytic processes owing to their conductive high surface area structure and tunable near surface composition. Herein, we study the porosity evolution processes in multimetallic alloys through classical dealloying and alternative methods, in pursuit of creating optimal bicontinuous nanoporous architectures for two important electrochemical reactions, central to the carbon and water cycles: CO2 reduction reaction (CO2RR) and oxygen evolution reaction (OER). To address the limitations of electrochemical dealloying for nanoporous metal synthesis, we first develop a new alternative method where we thermally decompose readily available transition metal dichalcogenides to create bicontinuous three dimensional metallic nanostructures. We show that spinodal decomposition with a proper balance of removal of the chalcogen component and surface diffusion of metal is possible that gives rise to uniform porosity length scales below 100 nm. Our new method is applicable to a broader range of materials including the refractory metals which are difficult to obtain in nanoporous bicontinuous form through conventional dealloying techniques. For CO2RR, we demonstrate favorable tuning of the near surface composition of core shell nanoporous alloys to mitigate a common problem in CO2 electrolysis which is the poisoning of electrocatalytic surface during long term reaction. CO2RR shows great promise as a remediation strategy to convert and store anthropogenic CO2. To realize its practical integration in industries with high CO2 emissions, uninterrupted activity of electrocatalyst is important at reasonable reaction timescales. Among the materials capable of electrochemically converting CO2 to formate which is a high energy density product, Palladium is unique in that it has shown substantial faradaic efficiency at minimal overpotential. Limiting its implementation, however, is its gradual deactivation through CO poisoning during constant potential CO2RR. Here, we show synthesis of core-shell nanoporous multi-metallic Pd alloys that display suppressed CO deactivation during formate production based on suitable choice of alloying component. The improvement in deactivation tolerance has been attributed to a combination of electronic impacts of subsurface alloying components as well as the composition dependent hydricity of the Pd alloys. The Pd skinned nanoporous alloys have been obtained by electrochemical dealloying where the high surface area electrode structure provides high formate partial current densities with minimal CO poisoning while not altering the formate selectivity at low CO2RR overpotentials. Aqueous CO2RR system also requires a stable electrocatalyst at the anode for the OER which requires stricter stability constraints for the electrocatalysts. OER is also the performance limiting component in the water splitting reactions of PEM electrolyzers. The oxidative potential of OER is difficult for many active materials to survive. In addition to the sluggish kinetics of the anodic OER, low catalyst stability and electrode conductivity lead to process inefficiencies. Higher valent oxidation states of Ir have been identified as the only materials that demonstrate a reasonable balance of activity and durability for acidic OER. Attempts to make nanoporous Ir employing dealloying for high surface area electrodes are limited owing to its strong tendency to make immobile oxides that defy morphology evolution through dealloying. Here we design a dealloying protocol to create unique nanoporous Ir morphologies, including porous nanosheets that exhibit sufficient activity and durability while displaying higher lateral and through-plane conductivity when compared to standard IrO2 catalysts. The metallic core of the nanoporous metal ligaments and absence of any binder/support result in low electrode and charge transfer resistances; ultimately giving rise to lower overpotential and improved electrochemically active surface area (ECSA) normalized current densities compared to IrO2. This thesis outlines the analysis of design of nanoporous core shell bicontinuous alloys and porous nanosheets through top down techniques for wide combinations of metals including the refractory metals which are difficult to obtain through existing dealloying methods. Nanoporous metal based electrodes show promise for utilization in high throughput CO2RR systems and PEM water electrolyzers both of which are important parts of renewable energy technologies.

Download or read book Nanoporous Metals for Advanced Energy Technologies written by Yi Ding and published by Springer. This book was released on 2016-03-19 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the state-of-the-art research in nanoporous metals for potential applications in advanced energy fields, including proton exchange membrane fuel cells, Li batteries (Li ion, Li-S, and Li-O2), and supercapacitors. The related structural design and performance of nanoporous metals as well as possible mechanisms and challenges are fully addressed. The formation mechanisms of nanoporous metals during dealloying, the microstructures of nanoporous metals and characterization methods, as well as miscrostructural regulation of nanoporous metals through alloy design of precursors and surface diffusion control are also covered in detail. This is an ideal book for researchers, engineers, graduate students, and government/industry officers who are in charge of R&D investments and strategy related to energy technologies.

Download or read book Rational Design and Synthesis of Inorganic Nanostructures for Tandem Catalysis and CO2 Conversion written by Chenlu Xie and published by . This book was released on 2018 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of this dissertation focuses on the design and synthesis of new catalysts with well-defined structures and superior performance to meet the new challenges in heterogenous catalysis. The past decade has witness the development of nanoscience as well as the inorganic catalysts for industrial applications, however there are still fundamental challenges and practical need for catalysis. Specifically, it is desirable to have the ability to selectivity produce complex molecules from simple components. Another great challenge faced by the modern industry is being environmentally friendly, and going for a carbon neutral economy would require using CO2 as feedstock to produce valuable products. The work herein focuses on the design and synthesis of inorganic nanocrystal catalysts that address these challenges by achieving selective and sequential chemical reactions and conversion of CO2 to valuable products. Chapter 1 introduces the development of heterogenous catalysis and the colloidal synthesis of metal nanoparticles catalysts with well-controlled structure. Tremendous efforts have been devoted to understanding the nucleation and growth process in the colloidal synthesis and developing new methods to produce metal nanoparticles with controlled sizes, shapes, composition. These well-defined catalytic system shows promising catalytic performance, which can be modulated by their structure (size, shape, compositions and the metal-oxide interfaces). The chapters hereafter explore the synthesis of new catalysts with controlled structures for catalysis. Chapter 2 presents the design and synthesis of a three dimensional (3D) nanostructured catalysts CeO2-Pt@mSiO2 with dual metal-oxide interfaces to study the tandem hydroformylation reaction in gas phase, where CO and H2 produced by methanol decomposition (catalyzed by CeO2-Pt interface) were reacted with ethylene to selectively yield propyl aldehyde (catalyzed by Pt-SiO2 interface). With the stable core-shell architecture and well-defined metal-oxide interfaces, the origin of the high propyl aldehyde selectivity over ethane, the dominant byproduct in conventional hydroformylation, was revealed by in-depth mechanism study and attributed to the synergybetween the two sequential reactions and the altered elementary reaction steps of the tandem reaction compared to the single-step reaction. The effective production of aldehyde through the tandem hydroformylation was also observed on other light olefin system, such as propylene and 1-butene. Chapter 3 expands the strategy of tandem catalysis into conversion of CO2 with hydrogen to value-added C2-C4 hydrocarbons, which is a major pursuit in clean energy research. Another well-defined 3D catalyst CeO2–Pt@mSiO2–Co was designed and synthesized, and CO2 was converted to C2-C4 hydrocarbons with 60% selectivity on this catalyst via reverse water gas shift reaction and subsequent Fischer–Tropsch process. In addition, the catalysts is stable and shows no obvious deactivation over 40 h. The successful production of C2−C4 hydrocarbons via a tandem process on a rationally designed, structurally well-defined catalyst demonstrates the power of sophisticated structure control in designing nanostructured catalysts for multiple-step chemical conversions. Chapter 4 turns to electrochemistry and apply the precision in catalyst structural design to the development of electrocatalysts for CO2 reduction. Herein, atomic ordering of bimetallic nanoparticles were synthetically tuned, from disordered alloy to ordered intermetallic, and it showed that this atomic level control over nanocrystal catalysts could give significant performance benefits in electrochemical CO2 reduction to CO. Atomic-level structural investigations revealed the atomic gold layers over the intermetallic core to be sufficient for enhanced catalytic behavior, which is further supported by DFT analysis.

Download or read book Electrocatalysts for Low Temperature Fuel Cells written by Thandavarayan Maiyalagan and published by John Wiley & Sons. This book was released on 2017-05-08 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Meeting the need for a text on solutions to conditions which have so far been a drawback for this important and trend-setting technology, this monograph places special emphasis on novel, alternative catalysts of low temperature fuel cells. Comprehensive in its coverage, the text discusses not only the electrochemical, mechanistic, and material scientific background, but also provides extensive chapters on the design and fabrication of electrocatalysts. A valuable resource aimed at multidisciplinary audiences in the fields of academia and industry.

Download or read book Nanocasting written by An-Hui Lu and published by Royal Society of Chemistry. This book was released on 2010 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured materials with tailored properties are regarded as a fundamental element in the development of future science and technology. Research is still ongoing into the nanosized construction elements required to create functional solids. The recently developed technique, nanocasting, has great advantage over others in terms of the synthesis of special nanostructured materials by the careful choice of suitable elements and nanoengineering steps. This new book summarizes the recent developments in nanocasting, including the principles of nanocasting, syntheses of novel nanostructured materials, characterization methods, detailed synthetic recipes and further possible development in this area. The book focuses on the synthesis of porous solids from the viewpoint of methodology and introduces the science of nanocasting from fundamental principles to their use in synthesis of various materials. It starts by outlining the principles of nanocasting, requirements to the templates and precursors and the tools needed to probe matter at the nanoscale level. It describes how to synthesize nano structured porous solids with defined characteristics and finally discusses the functionalization and application of porous solids. Special attention is given to new developments in this field and future perspectives. A useful appendix covering the detailed synthetic recipes of various templates including porous silica, porous carbon and colloidal spheres is included which will be invaluable to researchers wanting to follow and reproduce nanocast materials. Topics covered in the book include: * inorganic chemistry * organic chemistry * solution chemistry * sol-gel and interface science * acid-base equilibria * electrochemistry * biochemistry * confined synthesis The book gives readers not only an overview of nanocasting technology, but also sufficient information and knowledge for those wanting to prepare various nanostructured materials without needing to search the available literature.

Download or read book Functional Nanoporous Materials written by Christian Weinberger and published by . This book was released on 2020 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: With pore sizes up to 100 nm, the term "nanoporous" covers a wide range of material classes. A broad field of applications has arisen from the diversity of unique structures and properties of nanoporous materials. Recent research spans the range from fundamental studies of the behavior of atoms and molecules in confined space, creative synthetic pathways for novel materials, to applications in high-performance technologies. This Special Issue collects current studies about the progress in the development, characterization, and application of nanoporous materials, including (but not restricted to) mesoporous silica, carbon and metal oxides, porous coordination polymers, metal organic frameworks (MOFs), and covalent organic frameworks (COFs), as well as materials exhibiting hierarchical porosity. Their functionalities show promise for fields such as energy storage/conversion (e.g., photocatalysis and battery electrodes), sensing, catalysis, and their sorption properties for N2, CO2, NOx, or H2O, to name just a few.

Download or read book Virus enabled Design of High performing Three dimensional Nanomaterials for Electrochemical Energy Applications written by William Christopher Records and published by . This book was released on 2020 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: The accelerating pace of anthropogenic climate change has galvanized intensive interest in electrochemical energy storage and conversion. Developing electrode materials for electrochemical devices requires precision and synthetic control over a number of factors, including surface morphology, nanostructure, and distribution of active materials. To this end, my thesis work investigated strategies to implement the M13 bacteriophage as a programmable, lightweight scaffold in the synthesis of three-dimensional, nanoporous foams. Virus-templated nanofoams were incorporated into several relevant energy applications spanning water electrolysis, microbatteries, and electrolytic urea decomposition. The virus-mediated synthesis toolkit yielded clear enhancements in electrochemical performance, as well as design insights into improving nanostructured electrodes in diverse contexts. Virus-templated, platinum-nickel hydroxide nanofoams were first designed and optimized, displaying strong performance as electrocatalysts for the hydrogen evolution reaction in alkaline conditions (ca. -200 mA cm−2 [subscript geo] and -4.9 A mg−1 [subscript Pt] at -70 mV versus the reversible hydrogen electrode). Mass-normalized activity was definitively linked to the platinum dispersion within the virus-templated matrix, providing a guideline for future electrocatalyst development. Next, virus-templated metal phosphides were engineered with orthogonal control over nanoscale features, phase, and composition. Synthetic versatility was developed across monometallic nickel and copper, as well as bimetallic nickel-cobalt, material systems. When applied as Li-ion microbattery anodes, virus-templated Ni5P4 demonstrated a discharge capacity of 677 mAh g−1 (677 mAh cm−3) and an 80% capacity retention over more than 100 cycles, outperforming analogous reported Ni5P4 materials. The strong performance was attributed to the virus-templated nanostructure, which remains electronically conductive throughout cycling and obviates the need for conductive additives. In the final application, a fundamental exploration into Ni-based catalysts for the electrooxidation of urea was undertaken, highlighting the need for revised benchmarks to facilitate accurate comparisons across the literature and developing an empirical hypothesis for catalyst instability under constant-current electrolysis. Virus-templated, Ni[subscript x]P[subscript y] nanofoams were again applied as electrocatalysts, displaying strong activity relative to the field and enhanced resistance to deactivation. Finally, several directions for scaling methodologies were presented with a future outlook for virus-templating as a material synthesis platform in electrochemical energy storage and conversion.

Download or read book Graphdiyne written by Yuliang Li and published by John Wiley & Sons. This book was released on 2022-01-10 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphdiyne Discover the most cutting-edge developments in the study of graphdiyne from a pioneer of the field In Graphdiyne: Fundamentals and Applications in Renewable Energy and Electronics, accomplished chemist Dr. Yuliang Li delivers a practical and insightful compilation of theoretical and experimental developments in the study of graphdiyne. Of interest to both academics and industrial researchers in the fields of nanoscience, organic chemistry, carbon science, and renewable energies, the book systematically summarizes recent research into the exciting new material. Discover information about the properties of graphdiyne through theoretical simulations and experimental characterizations, as well as the development of graphdiyne with appropriate preparation technology. Learn to create new graphdiyne-based materials and better understand its intrinsic properties. Find out about synthetic methodologies, the controlled growth of aggregated state structures, and structural characterization. In addition to demonstrating the interdisciplinary potential and relevance of graphdiyne, the book also offers readers: A thorough introduction to basic structure and band gap engineering, including molecular and electronic structure, mechanical properties, and the layers structure of bulk graphdiyne Explorations of Graphdiyne synthesis and characterization, including films, nanotube arrays and nanowires, nanowalls, and nanosheets, as well as characterization methods Discussions of the functionalization of graphdiyne, including heteroatom doping, metal decoration, and absorption of guest molecules Rigorous treatments of Graphdiyne-based materials in catalytic applications, including photo- and electrocatalysts Perfect for organic chemists, electronics engineers, materials scientists, and physicists, Graphdiyne: Fundamentals and Applications in Renewable Energy and Electronics will also find its place on the bookshelves of surface and solid-state chemists, electrochemists, and catalytic chemists seeking a one-stop reference on this rising-star carbon material.

Download or read book The Reduction of Carbon Dioxide to Formic Acid written by Weldon G. Brown and published by . This book was released on 1949 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Solar to Chemical Conversion written by Hongqi Sun and published by John Wiley & Sons. This book was released on 2021-04-29 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book systematically covers the fundamentals in solar energy conversion to chemicals, either fuels or chemical products. It includes natural photosynthesis with emphasis on artificial processes for solar energy conversion and utilization. The chemical processes of solar energy conversion via homogeneous and/or heterogeneous photocatalysis has been described with the mechanistic insights. It also consists of reaction systems toward a variety of applications, such as water splitting for hydrogen or oxygen evolution, photocatalytic CO2 reduction to fuels, and light driven N2 fixation, etc. This unique book offers the readers a broad view of solar energy utilization based on chemical processes and their perspectives for future sustainability.

Download or read book Bimetallic Nanostructures written by Ya-Wen Zhang and published by John Wiley & Sons. This book was released on 2018-05-16 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systematically summarizes the current status and recent advances in bimetallic structures, their shape-controlled synthesis, properties, and applications Intensive researches are currently being carried out on bimetallic nanostructures, focusing on a number of fundamental, physical, and chemical questions regarding their synthesis and properties. This book presents a systematic and comprehensive summary of the current status and recent advances in this field, supporting readers in the synthesis of model bimetallic nanoparticles, and the exploration and interpretation of their properties. Bimetallic Nanostructures: Shape-Controlled Synthesis for Catalysis, Plasmonics and Sensing Applications is divided into three parts. Part 1 introduces basic chemical and physical knowledge of bimetallic structures, including fundamentals, computational models, and in situ characterization techniques. Part 2 summarizes recent developments in synthetic methods, characterization, and properties of bimetallic structures from the perspective of morphology effect, including zero-dimensional nanomaterials, one-dimensional nanomaterials, and two-dimensional nanomaterials. Part 3 discusses applications in electrocatalysis, heterogeneous catalysis, plasmonics and sensing. Comprehensive reference for an important multidisciplinary research field Thoroughly summarizes the present state and latest developments in bimetallic structures Helps researchers find optimal synthetic methods and explore new phenomena in surface science and synthetic chemistry of bimetallic nanostructures Bimetallic Nanostructures: Shape-Controlled Synthesis for Catalysis, Plasmonics and Sensing Applications is an excellent source or reference for researchers and advanced students. Academic researchers in nanoscience, nanocatalysis, and surface plasmonics, and those working in industry in areas involving nanotechnology, catalysis and optoelectronics, will find this book of interest.

Download or read book Nanoporous Gold written by Arne Wittstock and published by Royal Society of Chemistry. This book was released on 2012-03-28 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-surface-area materials have recently attracted significant interest due to potential applications in various fields such as electrochemistry and catalysis, gas-phase catalysis, optics, sensors and actuators, energy harvesting and storage. In contrast to classical materials the properties of high-surface-area materials are no longer determined by their bulk, but by their nanoscale architecture. Nanoporous gold (np-Au) represents the fascinating class of mesoporous metals that have been intensively investigated in recent years. The current interest and the increasing number of scientific publications show that np-Au by itself is an outstanding nano-material that justifies a book devoted to all aspects of its properties and applications. The resulting publication is a discussion of this unique nano-material and is an accessible and comprehensive introduction to the field. The book provides a broad, multi-disciplinary platform to learn more about the properties of nanoporous gold from an inter-disciplinary perspective. It starts with an introduction and overview of state-of-the-art applications and techniques characterizing this material and its applications. It then covers the progress in research within the last years. The chapters are in-depth overviews written by the world's leading scientists in the particular field. Each chapter covers one technique or application so that the reader can easily target their favoured topic and will get the latest and state-of-the-art information in the field.

Download or read book Atomically Precise Metal Nanoclusters written by Zhikun Wu and published by Morgan & Claypool Publishers. This book was released on 2020-11-06 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: Atomically precise metal nanocluster research has emerged as a new frontier. This book serves as an introduction to metal nanoclusters protected by ligands. The authors have summarized the synthesis principles and methods, the characterization methods and new physicochemical properties, and some potential applications. By pursuing atomic precision, such nanocluster materials provide unprecedented opportunities for establishing precise relationships between the atomic-level structures and the properties. The book should be accessible to senior undergraduate and graduate students, researchers in various fields (e.g., chemistry, physics, materials, biomedicine, and engineering), R&D scientists, and science policy makers.

Download or read book Noble and Precious Metals written by Mohindar Seehra and published by BoD – Books on Demand. This book was released on 2018-07-04 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of copper, silver, gold and platinum in jewelry as a measure of wealth is well known. This book contains 19 chapters written by international authors on other uses and applications of noble and precious metals (copper, silver, gold, platinum, palladium, iridium, osmium, rhodium, ruthenium, and rhenium). The topics covered include surface-enhanced Raman scattering, quantum dots, synthesis and properties of nanostructures, and its applications in the diverse fields such as high-tech engineering, nanotechnology, catalysis, and biomedical applications. The basis for these applications is their high-free electron concentrations combined with high-temperature stability and corrosion resistance and methods developed for synthesizing nanostructures. Recent developments in all these areas with up-to-date references are emphasized.

Download or read book Fabrication of Metal Organic Framework Derived Nanomaterials and Their Electrochemical Applications written by Wei Xia and published by Springer. This book was released on 2018-04-03 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis systematically introduces readers to a new metal-organic framework approach to fabricating nanostructured materials for electrochemical applications. Based on the metal-organic framework (MOF) approach, it also demonstrates the latest ideas on how to create optimal MOF and MOF-derived nanomaterials for electrochemical reactions under controlled conditions. The thesis offers a valuable resource for researchers who want to understand electrochemical reactions at nanoscale and optimize materials from rational design to achieve enhanced electrochemical performance. It also serves as a useful reference guide to fundamental research on advanced electrochemical energy storage materials and the synthesis of nanostructured materials.

Download or read book Carbon Dioxide Utilization to Sustainable Energy and Fuels written by Inamuddin and published by Springer Nature. This book was released on 2021-11-30 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited book provides an in-depth overview of carbon dioxide (CO2) transformations to sustainable power technologies. It also discusses the wide scope of issues in engineering avenues, key designs, device fabrication, characterizations, various types of conversions and related topics. It includes studies focusing on the applications in catalysis, energy conversion and conversion technologies, etc. This is a unique reference guide, and one of the detailed works is on this technology. The book is the result of commitments by leading researchers from various backgrounds and expertise. The book is well structured and is an essential resource for scientists, undergraduate, postgraduate students, faculty, R&D professionals, energy chemists and industrial experts.

Download or read book Nanocarbon Electrochemistry written by Nianjun Yang and published by John Wiley & Sons. This book was released on 2019-11-14 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive introduction to the field of nanocarbon electrochemistry The discoveries of new carbon materials such as fullerene, graphene, carbon nanotubes, graphene nanoribbon, carbon dots, and graphdiyne have triggered numerous research advances in the field of electrochemistry. This book brings together up-to-date accounts of the recent progress, developments, and achievements in the electrochemistry of different carbon materials, focusing on their unique properties and various applications. Nanocarbon Electrochemistry begins by looking at the studies of heterogeneous electron transfer at various carbon electrodes when redox-active molecules are reversibly and specifically adsorbed on the carbon electrode surface. It then covers electrochemical energy storage applications of various carbon materials, particularly the construction and performance of supercapacitors and batteries by use of graphene and related materials. Next, it concentrates on electrochemical energy conversion applications where electrocatalysis at 0D, 1D, 2D, and 3D carbon materials nanocarbon materials is highlighted. The book finishes with an examination of the contents of electrogenerated chemiluminescence and photoelectrochemical pollutant degradation by use of diamond and related carbon materials. Covers the fundamental properties of different carbon materials and their applications across a wide range of areas Provides sufficient background regarding different applications, which contributes to the understanding of specialists and non-specialists Examines nanoelectrochemistry of adsorption-coupled electron transfer at carbon electrodes; graphene and graphene related materials; diamond electrodes for the electrogenerated chemiluminescence; and more Features contributions from an international team of distinguished researchers Nanocarbon Electrochemistry is an ideal book for students, researchers, and industrial partners working on many diverse fields of electrochemistry, whether they already make frequent use of carbon electrodes in one form of another or are looking at electrodes for new applications.