Download or read book Design of Reinforced Concrete Sections Under Bending and Axial Forces written by Helena Barros and published by Springer Nature. This book was released on 2022-01-03 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains auxiliary calculation tools to facilitate the safety assessment of reinforced concrete sections. Essential parameters in the design to the ultimate limit state of resistance such as the percentage of reinforcement and the position of the neutral axis in concrete cross-sections, as well as the control of the maximum stresses in service limit states are provided by these tools. A set of tables, charts and diagrams used to design cross-sections of reinforced and prestressed concrete structures are supplied. The most current beams and columns cross-sections namely, rectangular, circular and T-sections are considered. These tools have been prepared in line with the provisions of the new European regulations, with particular reference to Eurocode 2 – Design of Concrete Structures. The book stands as an ideal learning resource for students of structural design and analysis courses in civil engineering, building construction and architecture, as well as a valuable reference for concrete structural design professionals in practice.
Download or read book Design Aids for Rectangular Reinforced Concrete Sections Under Combined Bending and Axial Forces written by and published by . This book was released on 1988 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reinforced Concrete written by B.S. Choo and published by CRC Press. This book was released on 2018-10-08 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of a highly practical text gives a detailed presentation of the design of common reinforced concrete structures to limit state theory in accordance with BS 8110.
Download or read book Ultimate limit state design models a state of art report written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1995-06-01 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first part of the report is devoted to linear elements (beams, columns) and includes chapters on shear and flexure in beams, ultimate limit state design of prestressed beams, and of reinforced concrete members under combination of bending with axial load and shear, of beams subjected to torsion, and a chapter on shear design based on truss models with crack friction. The second part treats two-dimensional elements and includes background information on ULS design of wall, shell, and slab elements. lt concludes with a chapter on axisymmetric punching of slabs.
Download or read book Reinforced Concrete Design to Eurocode 2 written by Giandomenico Toniolo and published by Springer. This book was released on 2017-05-09 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook describes the basic mechanical features of concrete and explains the main resistant mechanisms activated in the reinforced concrete structures and foundations when subjected to centred and eccentric axial force, bending moment, shear, torsion and prestressing. It presents a complete set of limit-state design criteria of the modern theory of RC incorporating principles and rules of the final version of the official Eurocode 2. This textbook examines methodological more than notional aspects of the presented topics, focusing on the verifications of assumptions, the rigorousness of the analysis and the consequent degree of reliability of results. Each chapter develops an organic topic, which is eventually illustrated by examples in each final paragraph containing the relative numerical applications. These practical end-of-chapter appendices and intuitive flow-charts ensure a smooth learning experience. The book stands as an ideal learning resource for students of structural design and analysis courses in civil engineering, building construction and architecture, as well as a valuable reference for concrete structural design professionals in practice.
Download or read book Reinforced Concrete Beams Columns and Frames written by Jostein Hellesland and published by John Wiley & Sons. This book was released on 2013-02-13 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is focused on the theoretical and practical design of reinforced concrete beams, columns and frame structures. It is based on an analytical approach of designing normal reinforced concrete structural elements that are compatible with most international design rules, including for instance the European design rules – Eurocode 2 – for reinforced concrete structures. The book tries to distinguish between what belongs to the structural design philosophy of such structural elements (related to strength of materials arguments) and what belongs to the design rule aspects associated with specific characteristic data (for the material or loading parameters). A previous book, entitled Reinforced Concrete Beams, Columns and Frames – Mechanics and Design, deals with the fundamental aspects of the mechanics and design of reinforced concrete in general, both related to the Serviceability Limit State (SLS) and the Ultimate Limit State (ULS), whereas the current book deals with more advanced ULS aspects, along with instability and second-order analysis aspects. Some recent research results including the use of non-local mechanics are also presented. This book is aimed at Masters-level students, engineers, researchers and teachers in the field of reinforced concrete design. Most of the books in this area are very practical or code-oriented, whereas this book is more theoretically based, using rigorous mathematics and mechanics tools. Contents 1. Advanced Design at Ultimate Limit State (ULS). 2. Slender Compression Members – Mechanics and Design. 3. Approximate Analysis Methods. Appendix 1. Cardano’s Method. Appendix 2. Steel Reinforcement Table. About the Authors Jostein Hellesland has been Professor of Structural Mechanics at the University of Oslo, Norway since January 1988. His contribution to the field of stability has been recognized and magnified by many high-quality papers in famous international journals such as Engineering Structures, Thin-Walled Structures, Journal of Constructional Steel Research and Journal of Structural Engineering. Noël Challamel is Professor in Civil Engineering at UBS, University of South Brittany in France and chairman of the EMI-ASCE Stability committee. His contributions mainly concern the dynamics, stability and inelastic behavior of structural components, with special emphasis on Continuum Damage Mechanics (more than 70 publications in International peer-reviewed journals). Charles Casandjian was formerly Associate Professor at INSA (French National Institute of Applied Sciences), Rennes, France and the chairman of the course on reinforced concrete design. He has published work on the mechanics of concrete and is also involved in creating a web experience for teaching reinforced concrete design – BA-CORTEX. Christophe Lanos is Professor in Civil Engineering at the University of Rennes 1 in France. He has mainly published work on the mechanics of concrete, as well as other related subjects. He is also involved in creating a web experience for teaching reinforced concrete design – BA-CORTEX.
Download or read book Design of Reinforced Concrete Structures written by Alan Williams and published by Dearborn Trade Publishing. This book was released on 2004 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is a comprehensive guide and reference to assist civil engineers preparing for the Structural Engineer Examination. It offers 350 pages of text and 70 design problems with complete step-by-step solutions. Topics covered: Materials for Reinforced Concrete; Limit State Principles; Flexure of Reinforced Concrete Beams; Shear and Torsion of Concrete Beams; Bond and Anchorage; Design of Reinforced Concrete Columns; Design of Reinforced Concrete Slabs and Footings; Retaining Walls; and Piled Foundations. An index is provided.
Download or read book Design of Reinforced Concrete Structures for Architects written by Harbhajan Singh and published by Abhishek Publications. This book was released on 2023-09-29 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: this book include the following chapters: 1.Introduction 2.working stress method of design 3.shear, bond and development length 4. analysis and design of singly reinforced rectangular beams 5.analysis and design of doubly reinforced rectangular beams 6.design of one way slap 7.design of cantilever slab 8.design of circular slap 9.design of two way slab 10.design of singly and doubly reinforced T-beams 11.design of L-beams 12.design of continuous slabs 13.design of continuous beam 14.design of axially loaded RCC columns 15.isolated column footings and RCC footings for walls 16.design of stairs 17.design of corner balcony and coffer slab 18.limit state method 19.analysis and design of singly reinforced beam by limit state method 20.design of doubly reinforced beam by limit state method
Download or read book Concrete Structures written by A. Ghali and published by CRC Press. This book was released on 2006-01-16 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete structures must be designed not only to be safe against failure but also to perform satisfactorily in use. This book is written for practising engineers and students, and focuses on design methods for checking deflections and cracking which can affect the serviceability of reinforced and prestressed concrete structures. The authors present accurate and easy-to-apply methods of analysing immediate and long-term stresses and deformations. These methods allow designers to account for variations of concrete properties from project to project and from country to country, making the book universally applicable. Comprehensively updated, this third edition of Concrete Structures also includes four new chapters covering such topics as: non-linear analysis of plane frames, design for serviceability of prestressed concrete, serviceability of members reinforced with fibre polymer bars, and the analysis of time-dependent internal forces with linear computer programs that are routinely used by structural designers. A website accompanies the book, featuring three design calculation programs related to stresses in cracked sections, creep coefficients and time-dependent analysis. The book contains numerous examples, some of which are worked out in the SI units and others in the Imperial units. The input data and the main results are given in both SI and Imperial units. The book is not tied to any specific code, although the latest American and European codes of practice are covered in the appendices.
Download or read book Principles of Reinforced Concrete Design written by Mete A. Sozen and published by CRC Press. This book was released on 2014-07-14 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encouraging creative uses of reinforced concrete, Principles of Reinforced Concrete Design draws a clear distinction between fundamentals and professional consensus. This text presents a mixture of fundamentals along with practical methods. It provides the fundamental concepts required for designing reinforced concrete (RC) structures, emphasizing principles based on mechanics, experience, and experimentation, while encouraging practitioners to consult their local building codes. The book presents design choices that fall in line with the boundaries defined by professional consensus (building codes), and provides reference material outlining the design criteria contained in building codes. It includes applications for both building and bridge structural design, and it is applicable worldwide, as it is not dependent upon any particular codes. Contains concise coverage that can be taught in one semester Underscores the fundamental principles of behavior Provides students with an understanding of the principles upon which codes are based Assists in navigating the labyrinth of ever-changing codes Fosters an inherent understanding of design The text also provides a brief history of reinforced concrete. While the initial attraction for using reinforced concrete in building construction has been attributed to its fire resistance, its increase in popularity was also due to the creativity of engineers who kept extending its limits of application. Along with height achievement, reinforced concrete gained momentum by providing convenience, plasticity, and low-cost economic appeal. Principles of Reinforced Concrete Design provides undergraduate students with the fundamentals of mechanics and direct observation, as well as the concepts required to design reinforced concrete (RC) structures, and applies to both building and bridge structural design.
Download or read book Design of Reinforced Concrete written by Jack C. McCormac and published by . This book was released on 2005 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description
Download or read book Concrete Structures written by A. Ghali and published by CRC Press. This book was released on 2020-10-29 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents the most effective analysis for predicting the true stresses and deflections of concrete structures, accounting for creep and shrinkage of concrete and relaxation of prestressed reinforcement. Sustainability has become a major requirement in modern structures, which need to sustain satisfactory service over a longer life. It is not rare to specify a life span of 100 years for infrastructure such as bridges. This complete and wide-ranging study of stresses and deformations of reinforced and prestressed concrete structures focuses on design methods for avoiding the deflections and cracking that diminish serviceability. This fourth edition has a new emphasis on designing for serviceability. It has been comprehensively updated. It now includes 65 solved examples and more than 45 instructive problems with answers given at the end of the book. An accompanying website contains design calculation programs, which allow interactive data input. Independent of codes of practice, the book is universally applicable, and is especially suitable for practising engineers and graduate students.
Download or read book Ultimate strength design of reinforced concrete sections subjected to an axial load and bending about both principal axes written by Stuart D. Werner and published by . This book was released on 1962 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reinforced Concrete with Worked Examples written by Franco Angotti and published by Springer Nature. This book was released on 2022-06-07 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook describes the design of reinforced and prestressed concrete structures according to the latest advances both in the field of materials, concrete and steel, and in the field of structural analysis. These advances have been included in current version of Eurocode 2, which is taken as reference. All subjects are presented starting from their theoretical bases and passing to corresponding EC2 formulations. A large part of the book is concerned with the most innovative EC2 parts, like nonlinear structural analyses, second-order effects, punching and strut-and-tie models. The textbook is equipped with numerous worked examples, useful for the reader who is not familiar with the design of reinforced and prestressed concrete structures by the Limit State Method. Examples have been chosen among the most frequent cases of the professional practice. Thanks to this structure, it can be of interest both to structural designers for their professional training and to students of engineering and architecture schools for their studies. The volume contains twelve chapters, which follow the same structure of EC2, except for chapter 6 (dealing with prestressed concrete structures), which does not match any chapter of EC2, as prestressed concrete is considered in EC2 as a particular case of reinforced concrete, and corresponding formulations are shed over different chapters.
Download or read book Structural Concrete written by M. Nadim Hassoun and published by John Wiley & Sons. This book was released on 2015-03-13 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most up to date structural concrete text, with the latest ACI revisions Structural Concrete is the bestselling text on concrete structural design and analysis, providing the latest information and clear explanation in an easy to understand style. Newly updated to reflect the latest ACI 318-14 code, this sixth edition emphasizes a conceptual understanding of the subject, and builds the student's body of knowledge by presenting design methods alongside relevant standards and code. Numerous examples and practice problems help readers grasp the real-world application of the industry's best practices, with explanations and insight on the extensive ACI revision. Each chapter features examples using SI units and US-SI conversion factors, and SI unit design tables are included for reference. Exceptional weather-resistance and stability make concrete a preferred construction material for most parts of the world. For civil and structural engineering applications, rebar and steel beams are generally added during casting to provide additional support. Pre-cast concrete is becoming increasingly common, allowing better quality control, the use of special admixtures, and the production of innovative shapes that would be too complex to construct on site. This book provides complete guidance toward all aspects of reinforced concrete design, including the ACI revisions that address these new practices. Review the properties of reinforced concrete, with models for shrink and creep Understand shear, diagonal tension, axial loading, and torsion Learn planning considerations for reinforced beams and strut and tie Design retaining walls, footings, slender columns, stairs, and more The American Concrete Institute updates structural concrete code approximately every three years, and it's critical that students learn the most recent standards and best practices. Structural Concrete provides the most up to date information, with intuitive explanation and detailed guidance.
Download or read book Concrete Beams with Openings written by M. A. Mansur and published by CRC Press. This book was released on 1999-01-29 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book compiles state-of-the-art information on the behavior, analysis, and design of concrete beams containing transverse openings. Discussions include the need, effects, and classification of openings as well as the general requirements for fulfilling design pure bending, combined bending, and shear - illustrated with numerical examples torsion alone or in combination with bending and shear large rectangular openings as well as opening size and location on beam behavior methods for analyzing ultimate strength and serviceability requirements effects of torsion in beams large openings in continuous beams and their effects on possible redistribution of internal forces as well as guidelines and procedures for the design of such beams effect of prestressing on the serviceability and strength of beams with web openings design against cracking at openings and ultimate loads Concrete Beams with Openings serves as an invaluable source of information for designers and practicing engineers, especially useful since little or no provision or guidelines are currently available in most building codes.
Download or read book Concrete Structures written by A. Ghali and published by CRC Press. This book was released on 2020-10-28 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents the most effective analysis for predicting the true stresses and deflections of concrete structures, accounting for creep and shrinkage of concrete and relaxation of prestressed reinforcement. Sustainability has become a major requirement in modern structures, which need to sustain satisfactory service over a longer life. It is not rare to specify a life span of 100 years for infrastructure such as bridges. This complete and wide-ranging study of stresses and deformations of reinforced and prestressed concrete structures focuses on design methods for avoiding the deflections and cracking that diminish serviceability. This fourth edition has a new emphasis on designing for serviceability. It has been comprehensively updated. It now includes 65 solved examples and more than 45 instructive problems with answers given at the end of the book. An accompanying website contains design calculation programs, which allow interactive data input. Independent of codes of practice, the book is universally applicable, and is especially suitable for practising engineers and graduate students.
