Download or read book Design Decisions and Co operative Development of Manufacturing Systems written by Pär Mårtensson and published by . This book was released on 2006 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Cooperative Design of Manufacturing Systems in SMEs written by Dörte Bastian-Köpp and published by GITO mbH Verlag. This book was released on 2009 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Planning and improving of production systems and manufacturing processes is a most complex task in engineering. In small and medium sized enterprises (SME's) it is usually carried out by a group of enterprise planners from different departments within a planning project. The main issue of this research is to overcome the logical and technical boundaries between the highly-interrelated modelling experts and their specific modelling tools and partial planning models as well as to efficiently coordinate their distributed, cooperative planning tasks. Therefore, a methodical integration concept as well as a groupware-based cooperation concept was developed. Now it is possible to combine the large number of sophisticated modelling tools, factory simulators as well as GPM tools, and to guarantee a seamless planning process. The conceptual ideas were implemented in a prototypical toolbox to show the technical realization of the flexible concepts for integration and cooperation support. (Back cover).

Download or read book Design of Flexible Production Systems written by Tullio Tolio and published by Springer Science & Business Media. This book was released on 2008-12-11 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade, the production of mechanical components to be assembled in final products produced in high volumes (e.g. cars, mopeds, industrial vehicles, etc.) has undergone deep changes due to the overall modifications in the way companies compete. Companies must consider competitive factors such as short lead times, tight product tolerances, frequent market changes and cost reduction. Anyway, companies often have to define production objectives as trade-offs among these critical factors since it can be difficult to improve all of them. Even if system flexibility is often considered a fundamental requirement for firms, it is not always a desirable characteristic of a system because it requires relevant investment cost which can jeopardize the profitability of the firm. Dedicated systems are not able to adapt to changes of the product characteristics while flexible systems offer more flexibility than what is needed, thus increasing investment and operative costs. Production contexts characterized by mid to high demand volume of well identified families of products in continuous evolution do not require the highest level of flexibility; therefore, manufacturing system flexibility must be rationalized and it is necessary to find out the best trade-off between productivity and flexibility by designing manufacturing systems endowed with the right level of flexibility required by the production problem. This new class of production systems can be named Focused Flexibility Manufacturing Systems-FFMSs. The flexibility degree in FFMSs is related to their ability to cope with volume, mix and technological changes, and it must take into account both present and future changes. The required level of system flexibility impacts on the architecture of the system and the explicit design of flexibility often leads to hybrid systems, i.e. automated integrated systems in which parts can be processed by both general purpose and dedicated machines. This is a key issue of FFMSs and results from the matching of flexibility and productivity that respectively characterize FMSs and Dedicated Manufacturing Systems (DMSs). The market share of the EU in the machine tool sector is 44%; the introduction of focused flexibility would be particularly important for machine tool builders whose competitive advantage is based on the ability of customizing their systems on the basis of needs of their customers. In fact, even if current production contexts frequently present situations which would fit well with the FFMS approach, tradition and know-how of machine tool builders play a crucial role. Firms often agree with the focused flexibility vision, nevertheless they decide not to pay the risk and efforts related to the design of this new system architecture. This is due also to the lack of well-structured design approaches which can help machine tool builders to configure innovative systems. Therefore, the FFMS topic is studied through the book chapters following a shared mission: "To define methodologies and tools to design production systems with a minimum level of flexibility needed to face, during their lifecycle, the product and process evolution both in the technological and demand aspects. The goal is to find out the optimal trade-off between flexibility and productivity". The book framework follows the architecture which has been developed to address the FFMS Design problem. This architecture is both broad and detailed, since it pays attention to all the relevant levels in a firm hierarchy which are involved in the system design. Moreover, the architecture is innovative because it models both the point of view of the machine tool builder and the point of view of the system user. The architecture starts analyzing Manufacturing Strategy issues and generating the possible demand scenario to be faced. Technological aspects play a key role while solving process plan problems for the products in the part family. Strategic and technological data becomes input when a machine tool builder performs system configuration. The resulting system configurations are possible solutions that a system user considers when planning its system capacity. All the steps of the architecture are deeply studied, developing methods and tools to address each subproblem. Particular attention is paid to the methodologies adopted to face the different subproblems: mathematical programming, stochastic programming, simulation techniques and inverse kinematics have been used. The whole architecture provides a general approach to implement the right degree of flexibility and it allows to study how different aspects and decisions taken in a firm impact on each other. The work presented in the book is innovative because it gives links among different research fields, such as Manufacturing Strategy, Process Plan, System Design, Capacity Planning and Performance Evaluation; moreover, it helps to formalize and rationalize a critical area such as manufacturing system flexibility. The addressed problem is relevant at an academic level but, also, at an industrial level. A great deal of industrial sectors need to address the problem of designing systems with the right degree of flexibility; for instance, automotive, white goods, electrical and electronic goods industries, etc. Attention to industrial issues is confirmed by empirical studies and real case analyses which are presented within the book chapters.

Download or read book Cooperative Knowledge Processing for Engineering Design written by Arthur B. Baskin and published by Springer. This book was released on 2013-06-29 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cooperative working environments and their development are becoming increasingly important and ever more frequent in different industrial sectors and this book provides a scientific approach for managing Team Engineering. Meta-cognitive knowledge and networks are identified as the key resources enabling engineering teams to work effectively and to reduce engineering time and this book illustrates how computer support can aid cooperative work within the context of practical methodologies and examples. The fields covered in the book include: State-of-the-art research in cooperative learning tools; Practical examples and methodologies illustrating the implementation of cooperative networks; and An interdisciplinary approach to team engineering. This valuable new book is sponsored by the International Federation for Information Processing (IFIP) and will be essential reading for researchers, engineers, technical managers involved in the development of advanced applications for engineering and manufacturing, and software design and engineering.

Download or read book Collaborative Product Design and Manufacturing Methodologies and Applications written by Wei Dong Li and published by Springer Science & Business Media. This book was released on 2007-06-02 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collaborative Product Design and Manufacturing Methodologies and Applications introduces a wide spectrum of collaborative engineering issues in design and manufacturing. It offers state-of-the-art chapters written by international experts from academia and industry, and reflects the most up-to-date R & D work and applications, especially those from the last three to five years. The book will serve as an essential reference for academics, upper-level undergraduate and graduate students and practicing professionals.

Download or read book Methods and Tools for Co operative and Integrated Design written by Serge Tichkiewitch and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: SMC COLOMBIER FONTAINE is a company in the AFE METAL group, which uses a sand casting process to manufacture steel primary parts. To reduce the "time to market", primary part producers need to reduce the time and cost of the industrialisation process. These factors, in addition to the global goal of improving process performance levels, brought SMC to develop numerical technologies and traceability from quotation to part delivery [1]. Nowadays, these improvements are incorporated into company culture. The next step in reducing the time and cost of the production process is to introduce a complete methodology of use and experience feedback of these new models and methods. To be able to generalise this approach, a CAD methodology is essential and thus becomes a step in the industrialisation process. The amount of improvements engendered by the numerical technologies largely justifies the time investment made to obtain a numerical definition of all the different elements in the sand casting process [2]. The objective of our approach is to optimise the product and its production process by generating a complete numerical reference, through the integration of quotation, CAD, simulation, new manufacturing technologies and effective production processes.

Download or read book Cooperative Systems Design written by Françoise Darses and published by IOS Press. This book was released on 2004 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: A recent conference brought together researchers who contribute to the design of cooperative systems and their integration into organizational settings. The aim of the conference was to advance the understanding and modeling of collaborative work situations which are mediated by technological artefacts, and to highlight the development of design methodologies for cooperative work analysis and cooperative systems design. Papers from the conference reflect the multidisciplinary nature of this area, representing fields such as computer and information sciences, knowledge engineering, distributed artificial intelligence, organizational and management sciences, and ergonomics. There is no subject index. Annotation : 2004 Book News, Inc., Portland, OR (booknews.com).

Download or read book Computer Aided and Integrated Manufacturing Systems written by Cornelius T. Leondes and published by World Scientific. This book was released on 2003 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an invaluable five-volume reference on the very broad and highly significant subject of computer aided and integrated manufacturing systems. It is a set of distinctly titled and well-harmonized volumes by leading experts on the international scene. The techniques and technologies used in computer aided and integrated manufacturing systems have produced, and will no doubt continue to produce, major annual improvements in productivity, which is defined as the goods and services produced from each hour of work. This publication deals particularly with more effective utilization of labor and capital, especially information technology systems. Together the five volumes treat comprehensively the major techniques and technologies that are involved. Contents: .: Neural Networks Techniques for the Optical Inspection of Machined Parts (N Guglielmi et al.); Computer Techniques and Applications of Automated Process Planning in Manufacturing Systems (K A Aldakhilallah & R Ramesh); Internet-Based Manufacturing Systems: Techniques and Applications (H Lau); and other articles. Readership: Graduate students, academics, researchers, and industrialists in computer engineering, industrial engineering, mechanical engineering, systems engineering, artificial intelligence and operations management

Download or read book MEMS Product Engineering written by Dirk Ortloff and published by Springer Science & Business Media. This book was released on 2013-10-11 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the methodological background to directing cooperative product engineering projects in a micro and nanotechnology setting. The methodology is based on well-established methods like PRINCE2 and StageGate, which are supplemented by best practices that can be individually tailored to the actual nature and size of the project at hand. This book is intended for everyone who takes an active role in either practical product engineering or in teaching it. This includes project and product management staff and program management offices in companies working on innovation projects, those active in innovation, as well as professors and students in engineering and management.

Download or read book Computer Aided and Integrated Manufacturing Systems Intelligent systems technologies written by Cornelius T. Leondes and published by World Scientific. This book was released on 2003 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an invaluable five-volume reference on the very broad and highly significant subject of computer aided and integrated manufacturing systems. It is a set of distinctly titled and well-harmonized volumes by leading experts on the international scene.The techniques and technologies used in computer aided and integrated manufacturing systems have produced, and will no doubt continue to produce, major annual improvements in productivity, which is defined as the goods and services produced from each hour of work. This publication deals particularly with more effective utilization of labor and capital, especially information technology systems. Together the five volumes treat comprehensively the major techniques and technologies that are involved.

Download or read book Design and Analysis of Integrated Manufacturing Systems written by W. Dale Compton and published by . This book was released on 1988 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Analysis of Integrated Manufacturing Systems is a fresh look at manufacturing from a systems point of view. This collection of papers from a symposium sponsored by the National Academy of Engineering explores the need for new technologies, the more effective use of new tools of analysis, and the improved integration of all elements of manufacturing operations, including machines, information, and humans. It is one of the few volumes to include detailed proposals for research that match the needs of industry.

Download or read book Computer Aided And Integrated Manufacturing Systems A 5 volume Set Volume 2 Intelligent Systems Technologies written by Cornelius T Leondes and published by World Scientific. This book was released on 2003-08-05 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an invaluable five-volume reference on the very broad and highly significant subject of computer aided and integrated manufacturing systems. It is a set of distinctly titled and well-harmonized volumes by leading experts on the international scene.The techniques and technologies used in computer aided and integrated manufacturing systems have produced, and will no doubt continue to produce, major annual improvements in productivity, which is defined as the goods and services produced from each hour of work. This publication deals particularly with more effective utilization of labor and capital, especially information technology systems. Together the five volumes treat comprehensively the major techniques and technologies that are involved.

Download or read book Design and Management of Manufacturing Systems written by Arkadiusz Gola and published by MDPI. This book was released on 2021-09-02 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the design and management of manufacturing systems have been explored in the literature for many years now, they still remain topical problems in the current scientific research. The changing market trends, globalization, the constant pressure to reduce production costs, and technical and technological progress make it necessary to search for new manufacturing methods and ways of organizing them, and to modify manufacturing system design paradigms. This book presents current research in different areas connected with the design and management of manufacturing systems and covers such subject areas as: methods supporting the design of manufacturing systems, methods of improving maintenance processes in companies, the design and improvement of manufacturing processes, the control of production processes in modern manufacturing systems production methods and techniques used in modern manufacturing systems and environmental aspects of production and their impact on the design and management of manufacturing systems. The wide range of research findings reported in this book confirms that the design of manufacturing systems is a complex problem and that the achievement of goals set for modern manufacturing systems requires interdisciplinary knowledge and the simultaneous design of the product, process and system, as well as the knowledge of modern manufacturing and organizational methods and techniques.

Download or read book Manufacturing Systems Redesign written by David O'Sullivan and published by Prentice Hall. This book was released on 1994 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text explores the context for the manufacturing systems design process; and presents an innovative approach to manufacturing systems design (IMP).

Download or read book Collaborative Design and Planning for Digital Manufacturing written by Lihui Wang and published by Springer Science & Business Media. This book was released on 2009-01-27 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collaborative design has attracted much attention in the research community in recent years. With increasingly decentralized manufacturing systems and processes, more collaborative approaches and systems are needed to support distributed manufacturing operations. "Collaborative Design and Planning for Digital Manufacturing" presents a focused collection of quality chapters on the state-of-the-art research efforts in the area of collaborative design and planning, as well as their practical applications towards digital manufacturing. "Collaborative Design and Planning for Digital Manufacturing" provides both a broad-based review of the key areas of research in digital manufacturing, and an in-depth treatment of particular methodologies and systems, from collaborative design to distributed planning, monitoring and control. Recent development and innovations in this area provide a pool of focused research efforts, relevant to a wide readership from academic researchers to practicing engineers.

Download or read book Agile Manufacturing Systems written by K Hans Raj and published by ALPHA SCIENCE INTERNATIONAL LIMITED. This book was released on 2011-12-17 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: Agility has become very important for the industries today as the lifetimes of the products are continuously shrinking. This book provides an excellent opportunity for updating understanding of agile methods from the design, manufacturing and business process perspectives, whether one is an industrial practitioner, academic researcher engineer or business graduate student. This volume is a compilation of various important aspects of agility consisting of systemic considerations in manufacturing, agile software systems, agile business systems, agile operations research, flexible manufacturing systems, advanced manufacturing systems with improved materials and mechanical behavior of products, agile aspects of design, clean and green manufacturing systems, environment, agile defence systems.

Download or read book Cooperative Design Visualization and Engineering written by Yuhua Luo and published by Springer Science & Business Media. This book was released on 2009-09-07 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 6th InternationalConference on Cooperative Design, Visualization and - gineering CDVE 2009 was held in central Europe - Luxembourg. Participants from ?ve continents came together to celebrate this annual event. Thepaperspublishedintheconferenceinthisvolumere?ectthenewprogress in the following aspect. Research in developing cooperative applications is currently focusing on two directions. One is the cooperation in the software development process and the other is the variety of the targeted cooperative software products. Many papers address how to facilitate cooperation in the software engineering process p- ticularly global software engineering. The importance of sharing information in cooperation is emphasized by the authors. For example, papers that addressed the developmentof sharing mental models, tools for easilyshared projects,sh- ing links for cross-media information spaces, sharing resources and transfer of knowledge among team members etc. have attracted special attention. Many papers presented in this volume are the research results of tackling problems in developing a great variety of cooperative software products. The targeted systems are cooperative support for music creation, cooperative process m- agement systems, cooperative visualization systems for geographic information, cooperative cultural information sharing platforms, cooperative reasoning s- tems, cooperative sensor networks for environment monitoring, remote coop- ative video vehicle monitoring systems etc. Another aspect of the papers in this volume is dealing with the problems in ?ner phases in the cooperative product production life cycle. The topics addressed range from partner selection for - operation at the beginning, requirement gathering, requirement negotiation, to cooperativedesign, production to cooperative testing, and ?nally to cooperative system operation.