Download or read book Design and Application of Modern Synchronous Generator Excitation Systems written by Jicheng Li and published by John Wiley & Sons. This book was released on 2019-03-18 with total page 1137 pages. Available in PDF, EPUB and Kindle. Book excerpt: Uses real world case studies to present the key technologies of design and application of the synchronous generator excitation system This book systematically introduces the important technologies of design and application of the synchronous generator excitation system, including the three-phase bridge rectifier circuit, diode rectifier for separate excitation, brushless excitation system and the static self-stimulation excitation system. It fuses discussions on specific topics and basic theories, providing a detailed description of the theories essential for synchronous generators in the analysis of excitation systems. Design and Application of Modern Synchronous Generator Excitation Systems provides a cutting-edge examination of excitation system, addressing conventional hydro-turbines, pumped storage units, steam turbines, and nuclear power units. It looks at the features and performance of the excitation system of the 700MW hydro-turbine deployed at the Three Gorges Hydropower Plant spanning the Yangtze River in China, as well as the working principle and start-up procedure of the static frequency converter (SFC) of pumped storage units. It also expounds on the composition of the excitation transformer, power rectifier, de-excitation equipment, and automatic excitation regulator—in addition to the performance features of the excitation system of conventional 600/1000MW turbines and the excitation system of the 1000MW nuclear power unit. Presents cutting-edge technologies of the excitation system from a unique engineering perspective Offers broad appeal to power system engineers who require a better understanding of excitation systems Addresses hydro-turbines, pumped storage units, steam turbines, and nuclear power units Provides an interdisciplinary examination of a range of applications Written by a senior expert in the area of excitation systems Written by an author with over 50 years' experience, Design and Application of Modern Synchronous Generator Excitation Systems is an excellent text that offers an interdisciplinary exposition for professionals, researchers, and academics alike.

Download or read book Synchronous Generators and Excitation Systems Operating in a Power System written by Stefan Paszek and published by Springer Nature. This book was released on 2020-01-03 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: In simulation tests of dynamic states of the power system (PS), the database of parameters of mathematical models of generating units is most commonly used. In many cases, the parameter values are burdened with large errors. Consequently, the results obtained are not reliable and do not allow drawing true conclusions. This monograph presents the developed methods and tools supporting the process of measurement determination of reliable values of parameters of mathematical models of synchronous generators and excitation systems. Special measurement tests are the basis for determining the parameters. The tests can be carried out in conditions of normal operation of generating units, in which electrical machines operate in the state of saturation of magnetic cores, and voltage regulators can reach limits. This book is intended for specialists in power engineering as well as students of faculties of electrical engineering interested in issues of PS transient states.

Download or read book Advances in Embedded and Fan Out Wafer Level Packaging Technologies written by Beth Keser and published by John Wiley & Sons. This book was released on 2019-02-12 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the advantages of Embedded and FO-WLP technologies, potential application spaces, package structures available in the industry, process flows, and material challenges Embedded and fan-out wafer level packaging (FO-WLP) technologies have been developed across the industry over the past 15 years and have been in high volume manufacturing for nearly a decade. This book covers the advances that have been made in this new packaging technology and discusses the many benefits it provides to the electronic packaging industry and supply chain. It provides a compact overview of the major types of technologies offered in this field, on what is available, how it is processed, what is driving its development, and the pros and cons. Filled with contributions from some of the field's leading experts,Advances in Embedded and Fan-Out Wafer Level Packaging Technologies begins with a look at the history of the technology. It then goes on to examine the biggest technology and marketing trends. Other sections are dedicated to chip-first FO-WLP, chip-last FO-WLP, embedded die packaging, materials challenges, equipment challenges, and resulting technology fusions. Discusses specific company standards and their development results Content relates to practice as well as to contemporary and future challenges in electronics system integration and packaging Advances in Embedded and Fan-Out Wafer Level Packaging Technologies will appeal to microelectronic packaging engineers, managers, and decision makers working in OEMs, IDMs, IFMs, OSATs, silicon foundries, materials suppliers, equipment suppliers, and CAD tool suppliers. It is also an excellent book for professors and graduate students working in microelectronic packaging research.

Download or read book Small signal stability control and dynamic performance of power systems written by M.J Gibbard and published by University of Adelaide Press. This book was released on 2015-07-15 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough and exhaustive presentation of theoretical analysis and practical techniques for the small-signal analysis and control of large modern electric power systems as well as an assessment of their stability and damping performance.

Download or read book IEEE Guide for Synchronous Generator Modeling Practices and Applications in Power System Stability Analyses written by and published by . This book was released on 2003 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Variable Speed Generators written by Ion Boldea and published by CRC Press. This book was released on 2005-11-09 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surveying the technologies used to satisfy the world's demand for open, efficient, and clean electricity, Variable Speed Generators provides an in-depth examination of variable-speed generators for both stand-alone and grid-connected applications. Part of The Electric Generators Handbook, Two-Volume Set, this work offers authoritative, tightly focused treatment of the topologies, steady state and transients modeling, performance, control, design, and testing of stand-alone and grid-connected generators operating at variable speeds. Variable Speed Generators thoroughly covers all types of variable-speed generators currently in progress in distributed generation and renewable energy applications around the world. It delves into the steady state, transients, control, and design of claw-pole rotor synchronous, induction, permanent magnet-assisted synchronous, and switched reluctance starter alternators for hybrid-electric vehicles. It also discusses PM synchronous, transverse-flux PM, and flux-reversal PM generators for low-speed wind and hydro energy conversion as well as linear-motion alternators for residential and spacecraft applications. Numerous design and control examples illustrate the discussion. The promise of renewable, sustainable energy rests on our ability to design innovative power systems that are able to harness energy from a variety of sources. Variable Speed Generators supplies the tools necessary to design, validate, and deploy the right power generation technologies to fulfill tomorrow's complex energy needs.

Download or read book Analysis of Synchronous Machines written by T.A. Lipo and published by CRC Press. This book was released on 2017-12-19 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis of Synchronous Machines, Second Edition is a thoroughly modern treatment of an old subject. Courses generally teach about synchronous machines by introducing the steady-state per phase equivalent circuit without a clear, thorough presentation of the source of this circuit representation, which is a crucial aspect. Taking a different approach, this book provides a deeper understanding of complex electromechanical drives. Focusing on the terminal rather than on the internal characteristics of machines, the book begins with the general concept of winding functions, describing the placement of any practical winding in the slots of the machine. This representation enables readers to clearly understand the calculation of all relevant self- and mutual inductances of the machine. It also helps them to more easily conceptualize the machine in a rotating system of coordinates, at which point they can clearly understand the origin of this important representation of the machine. Provides numerical examples Addresses Park’s equations starting from winding functions Describes operation of a synchronous machine as an LCI motor drive Presents synchronous machine transient simulation, as well as voltage regulation Applying his experience from more than 30 years of teaching the subject at the University of Wisconsin, author T.A. Lipo presents the solution of the circuit both in classical form using phasor representation and also by introducing an approach that applies MathCAD®, which greatly simplifies and expands the average student’s problem-solving capability. The remainder of the text describes how to deal with various types of transients—such as constant speed transients—as well as unbalanced operation and faults and small signal modeling for transient stability and dynamic stability. Finally, the author addresses large signal modeling using MATLAB®/Simulink®, for complete solution of the non-linear equations of the salient pole synchronous machine. A valuable tool for learning, this updated edition offers thoroughly revised content, adding new detail and better-quality figures.

Download or read book Wind Energy Explained written by James F. Manwell and published by John Wiley & Sons. This book was released on 2010-09-14 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind energy’s bestselling textbook- fully revised. This must-have second edition includes up-to-date data, diagrams, illustrations and thorough new material on: the fundamentals of wind turbine aerodynamics; wind turbine testing and modelling; wind turbine design standards; offshore wind energy; special purpose applications, such as energy storage and fuel production. Fifty additional homework problems and a new appendix on data processing make this comprehensive edition perfect for engineering students. This book offers a complete examination of one of the most promising sources of renewable energy and is a great introduction to this cross-disciplinary field for practising engineers. “provides a wealth of information and is an excellent reference book for people interested in the subject of wind energy.” (IEEE Power & Energy Magazine, November/December 2003) “deserves a place in the library of every university and college where renewable energy is taught.” (The International Journal of Electrical Engineering Education, Vol.41, No.2 April 2004) “a very comprehensive and well-organized treatment of the current status of wind power.” (Choice, Vol. 40, No. 4, December 2002)

Download or read book Synchronous Generators written by Ion Boldea and published by CRC Press. This book was released on 2015-09-03 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synchronous Generators, the first of two volumes in the Electric Generators Handbook, offers a thorough introduction to electrical energy and electricity generation, including the basic principles of electric generators. The book devotes a chapter to the most representative prime mover models for transients used in active control of various generators. Then, individual chapters explore large- and medium-power synchronous generator topologies, steady state, modeling, transients, control, design, and testing. Numerous case studies, worked-out examples, sample results, and illustrations highlight the concepts. Fully revised and updated to reflect the last decade’s worth of progress in the field, this Second Edition adds new sections that: Discuss high-power wind generators with fewer or no permanent magnets (PMs) Cover PM-assisted DC-excited salient pole synchronous generators Present multiphase synchronous machine inductances via the winding function method Consider the control of autonomous synchronous generators Examine additional optimization design issues Illustrate the optimal design of a large wind generator by the Hooke–Jeeves method Detail the magnetic equivalent circuit population-based optimal design of synchronous generators Address online identification of synchronous generator parameters Explain the small-signal injection online technique Explore line switching (on or off) parameter identification for isolated grids Describe synthetic back-to-back load testing with inverter supply The promise of renewable, sustainable energy rests on our ability to design innovative power systems that are able to harness energy from a variety of sources. Synchronous Generators, Second Edition supplies state-of-the-art tools necessary to design, validate, and deploy the right power generation technologies to fulfill tomorrow's complex energy needs.

Download or read book Converter Based Dynamics and Control of Modern Power Systems written by Antonello Monti and published by Academic Press. This book was released on 2020-10-22 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Converter-Based Dynamics and Control of Modern Power Systems addresses the ongoing changes and challenges in rotating masses of synchronous generators, which are transforming dynamics of the electrical system. These changes make it more important to consider and understand the role of power electronic systems and their characteristics in shaping the subtleties of the grid and this book fills that knowledge gap. Balancing theory, discussion, diagrams, mathematics, and data, this reference provides the information needed to acquire a thorough overview of resilience issues and frequency definition and estimation in modern power systems. This book offers an overview of classical power system dynamics and identifies ways of establishing future challenges and how they can be considered at a global level to overcome potential problems. The book is designed to prepare future engineers for operating a system that will be driven by electronics and less by electromechanical systems. Includes theory on the emerging topic of electrical grids based on power electronics Creates a good bridge between traditional theory and modern theory to support researchers and engineers Links the two fields of power systems and power electronics in electrical engineering

Download or read book Modelling and Simulation of Power Electronic Converter Dominated Power Systems in PowerFactory written by Francisco M. Gonzalez-Longatt and published by Springer Nature. This book was released on 2021 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of power electronic converters for numerical simulations based on DIgSILENT PowerFactory. It covers the working principles, key assumptions and implementation of models of different types of these power systems. The book is divided into three main parts: the first discusses high-voltage direct currents, while the second part examines distribution systems and micro-grids. Lastly, the third addresses the equipment and technologies used in modelling and simulation. Each chapter includes practical examples and exercises, and the accompanying software illustrates essential models, principles and performance using DIgSILENT PowerFactory. Exploring various current topics in the field of modelling power systems, this book will appeal to a variety of readers, ranging from students to practitioners.

Download or read book Power System Dynamics and Stability written by Peter W. Sauer and published by . This book was released on 1998 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a one-semester senior or beginning graduate level course in power system dynamics. This text begins with the fundamental laws for basic devices and systems in a mathematical modeling context. It includes systematic derivations of standard synchronous machine models with their fundamental controls. These individual models are interconnected for system analysis and simulation. Singular perturbation is used to derive and explain reduced-order models.

Download or read book Permanent Magnet Motor Technology written by Jacek F. Gieras and published by CRC Press. This book was released on 2009-08-25 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of permanent magnet (PM) motor technology and its impact on electromechanical drives has grown exponentially since the publication of the bestselling second edition. The PM brushless motor market has grown considerably faster than the overall motion control market. This rapid growth makes it essential for electrical and electromechanical engineers and students to stay up-to-date on developments in modern electrical motors and drives, including their control, simulation, and CAD. Reflecting innovations in the development of PM motors for electromechanical drives, Permanent Magnet Motor Technology: Design and Applications, Third Edition demonstrates the construction of PM motor drives and supplies ready-to-implement solutions to common roadblocks along the way. This edition supplies fundamental equations and calculations for determining and evaluating system performance, efficiency, reliability, and cost. It explores modern computer-aided design of PM motors, including the finite element approach, and explains how to select PM motors to meet the specific requirements of electrical drives. The numerous examples, models, and diagrams provided in each chapter facilitate a lucid understanding of motor operations and characteristics. This 3rd edition of a bestselling reference has been thoroughly revised to include: Chapters on high speed motors and micromotors Advances in permanent magnet motor technology Additional numerical examples and illustrations An increased effort to bridge the gap between theory and industrial applications Modified research results The growing global trend toward energy conservation makes it quite possible that the era of the PM brushless motor drive is just around the corner. This reference book will give engineers, researchers, and graduate-level students the comprehensive understanding required to develop the breakthroughs that will push this exciting technology to the forefront.

Download or read book Handbook of Electrical Power System Dynamics written by Mircea Eremia and published by John Wiley & Sons. This book was released on 2013-02-21 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to provide insights on new trends in power systems operation and control and to present, in detail, analysis methods of the power system behavior (mainly its dynamics) as well as the mathematical models for the main components of power plants and the control systems implemented in dispatch centers. Particularly, evaluation methods for rotor angle stability and voltage stability as well as control mechanism of the frequency and voltage are described. Illustrative examples and graphical representations help readers across many disciplines acquire ample knowledge on the respective subjects.

Download or read book Renewable and Efficient Electric Power Systems written by Gilbert M. Masters and published by John Wiley & Sons. This book was released on 2005-01-03 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a comprehensive textbook for the new trend of distributed power generation systems and renewable energy sources in electric power systems. It covers the complete range of topics from fundamental concepts to major technologies as well as advanced topics for power consumers. An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department -- to obtain the manual, send an email to [email protected]

Download or read book Nonlinear Control Systems and Power System Dynamics written by Qiang Lu and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Control Systems and Power System Dynamics presents a comprehensive description of nonlinear control of electric power systems using nonlinear control theory, which is developed by the differential geometric approach and nonlinear robust control method. This book explains in detail the concepts, theorems and algorithms in nonlinear control theory, illustrated by step-by-step examples. In addition, all the mathematical formulation involved in deriving the nonlinear control laws of power systems are sufficiently presented. Considerations and cautions involved in applying nonlinear control theory to practical engineering control designs are discussed and special attention is given to the implementation of nonlinear control laws using microprocessors. Nonlinear Control Systems and Power System Dynamics serves as a text for advanced level courses and is an excellent reference for engineers and researchers who are interested in the application of modern nonlinear control theory to practical engineering control designs.

Download or read book Electrical Design of Overhead Power Transmission Lines written by Masoud Farzaneh and published by McGraw Hill Professional. This book was released on 2012-09-03 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complete coverage of power line design and implementation "This text provides the essential fundamentals of transmission line design. It is a good blend of fundamental theory with practical design guidelines for overhead transmission lines, providing the basic groundwork for students as well as practicing power engineers, with material generally not found in one convenient book." IEEE Electrical Insultation Magazine Electrical Design of Overhead Power Transmission Lines discusses everything electrical engineering students and practicing engineers need to know to effectively design overhead power lines. Cowritten by experts in power engineering, this detailed guide addresses component selection and design, current IEEE standards, load-flow analysis, power system stability, statistical risk management of weather-related overhead line failures, insulation, thermal rating, and other essential topics. Clear learning objectives and worked examples that apply theoretical results to real-world problems are included in this practical resource. Electrical Design of Overhead Power Transmission Lines covers: AC circuits and sequence circuits of power networks Matrix methods in AC power system analysis Overhead transmission line parameters Modeling of transmission lines AC power-flow analysis using iterative methods Symmetrical and unsymmetrical faults Control of voltage and power flow Stability in AC networks High-voltage direct current (HVDC) transmission Corona and electric field effects of transmission lines Lightning performance of transmission lines Coordination of transmission line insulation Ampacity of overhead line conductors