Download or read book Advances in Production Management Systems written by Norio Okino and published by Springer. This book was released on 2013-06-29 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes 41 revised papers selected from 125 papers presented at the th 6 IFIP Technical Committee 5/Working Group 5.7 International Conference on Advances in Production Management Systems - APMS'96 -held at Kyoto, Japan, 4-6 November 1996. The task of selecting papers was accomplished by the IPC members voting. The selected papers were reviewed by IPC members who attended the conference. Based on the comments of reviewers, each paper was revised and rewritten in the format of this book. Therefore, the quality of each paper was raised very much. The papers selected in this volume were classified into invited articles and six themes taking into account the perspectives and future challenges in production management systems. Invited articles provide the overview of the present and future trend in the manufacturing world. Six themes were Next Generation Manufacturing Systems and Production Management, Benchmarking, Integration in Manufacturing and Decentralized Production Management, Strategic Aspects, Production Planning, and Production Scheduling. Each theme covers important area of present and future production management reflecting the recent trend in manufacturing toward globalization, agility in variety production, human centered manufacturing, environment consciousness, and so on. We hope that this volume will emerge a lot of new ideas to reach the goal of IFIP WG5.7 "Computer Aided Production Management" and to bridge the gap between research and industrial practice in production management systems.

Download or read book Decentralized Production Management Systems written by Siegfried Augustin and published by North Holland. This book was released on 1985 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Production Management Systems written by E. Eloranta and published by Elsevier. This book was released on 2012-12-02 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is divided into four sections: invited papers, principles, systems and techniques. The invited papers form an extensive overview of the state-of-the-art of production management. The themes range from the everlasting hunt for better productivity to the implications of CIM architectures (particularly CIM-OSA) for production management. The other three sections of the book look at the various problems affecting production management. One of the characteristics of modern production management is the need for better principles, systems and techniques for interorganizational production management. Another topic of crucial relevance is the necessity to master not only repetitive manufacturing but also one-of-a-kind product manufacturing. From the managerial point of view, the forecast-based make-to-stock principles have proven insufficient, with market forces demanding fast and reliable deliveries of customer-oriented products. The goals of production management have been re-evaluated as a result.

Download or read book Advances in Production Management Systems Smart Manufacturing and Logistics Systems Turning Ideas into Action written by Duck Young Kim and published by Springer Nature. This book was released on 2022-09-16 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set, IFIP AICT 663 and 664, constitutes the thoroughly refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2022, held in Gyeongju, South Korea in September 2022. The 139 full papers presented in these volumes were carefully reviewed and selected from a total of 153 submissions. The papers of APMS 2022 are organized into two parts. The topics of special interest in the first part included: AI & Data-driven Production Management; Smart Manufacturing & Industry 4.0; Simulation & Model-driven Production Management; Service Systems Design, Engineering & Management; Industrial Digital Transformation; Sustainable Production Management; and Digital Supply Networks. The second part included the following subjects: Development of Circular Business Solutions and Product-Service Systems through Digital Twins; “Farm-to-Fork” Production Management in Food Supply Chains; Urban Mobility and City Logistics; Digital Transformation Approaches in Production Management; Smart Supply Chain and Production in Society 5.0 Era; Service and Operations Management in the Context of Digitally-enabled Product-Service Systems; Sustainable and Digital Servitization; Manufacturing Models and Practices for Eco-Efficient, Circular and Regenerative Industrial Systems; Cognitive and Autonomous AI in Manufacturing and Supply Chains; Operators 4.0 and Human-Technology Integration in Smart Manufacturing and Logistics Environments; Cyber-Physical Systems for Smart Assembly and Logistics in Automotive Industry; and Trends, Challenges and Applications of Digital Lean Paradigm.

Download or read book Small Decentralized Wastewater Management Systems written by Ronald W. Crites and published by McGraw-Hill Science/Engineering/Math. This book was released on 1998-04-02 with total page 1112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Decentralized Wastewater Management presents a comprehensive approach to the design of both conventional and innovative systems for the treatment and disposal of wastewater or the reuse of treaded effluent. Smaller treatment plants, which are the concern of most new engineers, are the primary focus of this important book.

Download or read book Advances in Production Management Systems Production Management Systems for Volatile Uncertain Complex and Ambiguous Environments written by Matthias Thürer and published by Springer Nature. This book was released on with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Production Management Systems written by Jan Olhager and published by Springer Science & Business Media. This book was released on 2007-09-05 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together some of the latest thinking by leading experts from around the world on integrating systems and strategies in production management and related issues that are relevant for making production into a competitive resource for the firm. This book is composed of five parts, each focused on a specific theme: Linking systems and strategies; Strategic operations management; IS/IT applications in the value chain; Modelling and simulation; Improving operations.

Download or read book Advances in Production Management Systems Production Management for Data Driven Intelligent Collaborative and Sustainable Manufacturing written by Ilkyeong Moon and published by Springer. This book was released on 2018-08-24 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set IFIP AICT 535 and 536 constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2018, held in Seoul, South Korea, in August 2018. The 129 revised full papers presented were carefully reviewed and selected from 149 submissions. They are organized in the following topical sections: lean and green manufacturing; operations management in engineer-to-order manufacturing; product-service systems, customer-driven innovation and value co-creation; collaborative networks; smart production for mass customization; global supply chain management; knowledge based production planning and control; knowledge based engineering; intelligent diagnostics and maintenance solutions for smart manufacturing; service engineering based on smart manufacturing capabilities; smart city interoperability and cross-platform implementation; manufacturing performance management in smart factories; industry 4.0 - digital twin; industry 4.0 - smart factory; and industry 4.0 - collaborative cyber-physical production and human systems.

Download or read book Decentralized Control of Complex Systems written by S?iljak and published by Academic Press. This book was released on 1991-01-28 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: Decentralized Control of Complex Systems

Download or read book Databases for Production Management written by R. Companys and published by Elsevier. This book was released on 2012-12-02 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dealing with many aspects of the design, implementation and operation of databases for production management systems, this book presents research that is important to all those presently concerned with the computerisation of production management.

Download or read book Decentralized Production Management Systems written by S. Augustin and published by . This book was released on 1985 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Production Management Systems Production Management Systems for Responsible Manufacturing Service and Logistics Futures written by Erlend Alfnes and published by Springer Nature. This book was released on 2023-09-13 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 4-volume set, IFIP AICT 689-692, constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2023, held in Trondheim, Norway, during September 17–21, 2023. The 213 full papers presented in these volumes were carefully reviewed and selected from a total of 224 submissions. They were organized in topical sections as follows: Part I : Lean Management in the Industry 4.0 Era; Crossroads and Paradoxes in the Digital Lean Manufacturing World; Digital Transformation Approaches in Production Management; Managing Digitalization of Production Systems; Workforce Evolutionary Pathways in Smart Manufacturing Systems; Next Generation Human-Centered Manufacturing and Logistics Systems for the Operator 5.0; and SME 5.0: Exploring Pathways to the Next Level of Intelligent, Sustainable, and Human-Centered SMEs. Part II : Digitally Enabled and Sustainable Service and Operations Management in PSS Lifecycle; Exploring Digital Servitization in Manufacturing; Everything-as-a-Service (XaaS) Business Models in the Manufacturing Industry; Digital Twin Concepts in Production and Services; Experiential Learning in Engineering Education; Lean in Healthcare; Additive Manufacturing in Operations and Supply Chain Management; and Applications of Artificial Intelligence in Manufacturing. Part III : Towards Next-Generation Production and SCM in Yard and Construction Industries; Transforming Engineer-to-Order Projects, Supply Chains and Ecosystems; Modelling Supply Chain and Production Systems; Advances in Dynamic Scheduling Technologies for Smart Manufacturing; and Smart Production Planning and Control. Part IV : Circular Manufacturing and Industrial Eco-Efficiency; Smart Manufacturing to Support Circular Economy; Product Information Management and Extended Producer Responsibility; Product and Asset Life Cycle Management for Sustainable and Resilient Manufacturing Systems; Sustainable Mass Customization in the Era of Industry 5.0; Food and Bio-Manufacturing; Battery Production Development and Management; Operations and SCM in Energy-Intensive Production for a Sustainable Future; and Resilience Management in Supply Chains.

Download or read book Advances in Production Management Systems Initiatives for a Sustainable World written by Irenilza Nääs and published by Springer. This book was released on 2017-03-15 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed post-conference proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2016, held in Iguassu Falls, Brazil, in September 2016. The 117 revised full papers were carefully reviewed and selected from 164 submissions. They are organized in the following topical sections: computational intelligence in production management; intelligent manufacturing systems; knowledge-based PLM; modelling of business and operational processes; virtual, digital and smart factory; flexible, sustainable supply chains; large-scale supply chains; sustainable manufacturing; quality in production management; collaborative systems; innovation and collaborative networks; agrifood supply chains; production economics; lean manufacturing; cyber-physical technology deployments in smart manufacturing systems; smart manufacturing system characterization; knowledge management in production systems; service-oriented architecture for smart manufacturing systems; advances in cleaner production; sustainable production management; and operations management in engineer-to-order manufacturing.

Download or read book New Technologies for Production Management Systems written by Hiroyuki Yoshikawa and published by North-Holland. This book was released on 1987 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of production management. Computer-aided design of production systems. Towards integration. Knowlodge wngineering. Design of information systems.

Download or read book Transplant Production in the 21st Century written by Chieri Kubota and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: We are facing global issues concerning environmental pollution and shortages of food, feed, phytomass (plant biomass) and natural resources, which will become more serious in the forthcoming decades. To solve these issues, immeasurable numbers of various plants and huge amounts of phytomass are required every year for food, feed and for the improvement of amenities, the environment and our quality of life. Increased phytomass is also required as alternative raw material for producing bio-energy, biodegradable plastics and many other plant-originated industrial products. Only by using phytomass as a reproducible energy source and raw material, instead of fossil fuels and atomic power, we can save natural resources and minimize environmental pollution. To increase phytomass globally, we need billions of quality transplants (small plants) to be grown yearly, in the field or in the greenhouse, under various environmental conditions. However, these high quality transplants can be produced only under carefully controlled, rather than variable environment al conditions. Recent research has shown that the closed transplant production system requires considerably small amounts of electricity, water, fertilizer, CO) and pesticide to produce value-added transplants as scheduled with minimum release of environmental pollutants and minimum loss of transplants. The closed or closed-type transplant production system is defined as a transplant production system covered with opaque walls with minimized or controlled ventilation rates, using artificial lighting. With this system, photoperiod, light intensity and quality, air temperature, humidity, CO) concentration and air current speed can be controlled as desired.

Download or read book Encyclopedia of Sustainable Technologies written by Martin Abraham and published by Elsevier. This book was released on 2017-07-04 with total page 2276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of Sustainable Technologies, Eight Volume Set provides an authoritative assessment of the sustainable technologies that are currently available or in development. Sustainable technology includes the scientific understanding, development and application of a wide range of technologies and processes and their environmental implications. Systems and lifecycle analyses of energy systems, environmental management, agriculture, manufacturing and digital technologies provide a comprehensive method for understanding the full sustainability of processes. In addition, the development of clean processes through green chemistry and engineering techniques are also described. The book is the first multi-volume reference work to employ both Life Cycle Analysis (LCA) and Triple Bottom Line (TBL) approaches to assessing the wide range of technologies available and their impact upon the world. Both approaches are long established and widely recognized, playing a key role in the organizing principles of this valuable work. Provides readers with a one-stop guide to the most current research in the field Presents a grounding of the fundamentals of the field of sustainable technologies Written by international leaders in the field, offering comprehensive coverage of the field and a consistent, high-quality scientific standard Includes the Life Cycle Analysis and Triple Bottom Line approaches to help users understand and assess sustainable technologies

Download or read book Electrical Energy Storage for Buildings in Smart Grids written by Benoît Robyns and published by John Wiley & Sons. This book was released on 2019-07-09 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current developments in the renewable energy field, and the trend toward self-production and self-consumption of energy, has led to increased interest in the means of storing electrical energy; a key element of sustainable development. This book provides an in-depth view of the environmentally responsible energy solutions currently available for use in the building sector. It highlights the importance of storing electrical energy, demonstrates the many services that the storage of electrical energy can bring, and discusses the important socio-economic factors related to the emergence of smart buildings and smart grids. Finally, it presents the methodological tools needed to build a system of storage-based energy management, illustrated by concrete, pedagogic examples.