Download or read book The Effects of High Pressure High Temperature Hydrogen on Steel written by Ellis E. Fletcher and published by . This book was released on 1964 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report deals with the deleterious effects of hydrogen gas on steel at elevated temperatures and/or pressures. Hydrogen attack on steels is manifest as decarburization, intergranular fissuring, or blistering. These conditions result in lowered tensile strength, ductility, and impact strength. The reaction of hydrogen with iron carbide to form methane is probably the most important chemical reaction involved in the attack on steel by hydrogen. Attack of steel at elevated temperatures and pressures is limited or prevented by the following measures: (1) use of steel alloyed with strong carbide-forming elements, (2) use of liners of resistant alloy steels, and (3) substitution of resistant nonferrous alloys.

Download or read book Handbook of Comparative World Steel Standards written by John E. Bringas and published by ASTM International. This book was released on 2002 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Copper and Bronze in Art written by David A. Scott and published by Getty Publications. This book was released on 2002 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a review of 190 years of literature on copper and its alloys. It integrates information on pigments, corrosion and minerals, and discusses environmental conditions, conservation methods, ancient and historical technologies.

Download or read book Power Piping written by Charles Becht (IV.) and published by American Society of Mechanical Engineers. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This essential new volume provides background information, historical perspective, and expert commentary on the ASME B31.1 Code requirements for power piping design and construction. It provides the most complete coverage of the Code that is available today and is packed with additional information useful to those responsible for the design and mechanical integrity of power piping. The author, Dr. Becht, is a long-serving member of ASME piping code committees and is the author of the highly successful book, Process Piping: The Complete Guide to ASME B31.3, also published by ASME Press and now in its third edition. Dr. Becht explains the principal intentions of the Code, covering the content of each of the Code's chapters. Book inserts cover special topics such as spring design, design for vibration, welding processes and bonding processes. Appendices in the book include useful information for pressure design and flexibility analysis as well as guidelines for computer flexibility analysis and design of piping systems with expansion joints. From the new designer wanting to know how to size a pipe wall thickness or design a spring to the expert piping engineer wanting to understand some nuance or intent of the Code, everyone whose career involves process piping will find this to be a valuable reference.

Download or read book Toxicological Profile for Polycyclic Aromatic Hydrocarbons written by and published by . This book was released on 1995 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Metals Black Book written by and published by . This book was released on 1998 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Engineering Practice of Materials and Corrosion written by Jung-Chul (Thomas) Eun and published by Springer Nature. This book was released on 2020-09-04 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an in-depth guide to the practical aspects of materials and corrosion engineering in the energy and chemical industries. The book covers materials, corrosion, welding, heat treatment, coating, test and inspection, and mechanical design and integrity. A central focus is placed on industrial requirements, including codes, standards, regulations, and specifications that practicing material and corrosion engineers and technicians face in all roles and in all areas of responsibility. The comprehensive resource provides expert guidance on general corrosion mechanisms and recommends materials for the control and prevention of corrosion damage, and offers readers industry-tested best practices, rationales, and case studies.

Download or read book Engineering Materials 1 written by M. F. Ashby and published by . This book was released on 1996 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a broad introduction to the properties of materials used in engineering applications, and is intended to provide a course in engineering materials for students with no previous background in the subject.

Download or read book Nickel and Its Alloys written by Samuel Jacob Rosenberg and published by . This book was released on 1968 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Flanged plates written by Society of Naval Architects and Marine Engineers (New York, N.Y.) and published by . This book was released on 1961 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Technical Aspects of Critical Materials Use by the Steel Industry written by and published by . This book was released on 1983 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Toxicological Profile for Cobalt written by and published by . This book was released on 1992 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanical Behavior of Materials written by William F. Hosford and published by Cambridge University Press. This book was released on 2010 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a textbook on the mechanical behavior of materials for mechanical and materials engineering. It emphasizes quantitative problem solving. This new edition includes treatment of the effects of texture on properties and microstructure in Chapter 7, a new chapter (12) on discontinuous and inhomogeneous deformation, and treatment of foams in Chapter 21.

Download or read book Advanced Steels written by Yuqing Weng and published by Springer Science & Business Media. This book was released on 2011-04-14 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Advanced Steels: The Recent Scenario in Steel Science and Technology" contains more than 50 articles selected from the proceedings of the International Conference on Advanced Steels (ICAS) held during 9-11, Nov, 2010 in Guilin, China. This book covers almost all important aspects of steels from physical metallurgy, steel grades, processing and fabrication, simulation, to properties and applications. The book is intended for researchers and postgraduate students in the field of steels, metallurgy and materials science. Prof. Yuqing Weng is an academician of Chinese Academy of Engineering and the president of The Chinese Society for Metals. Prof. Han Dong is the vice president of Central Iron & Steel Research Institute and the director of National Engineering Research Center of Advanced Steel Technology, China. Prof. Yong Gan is an academician of Chinese Academy of Engineering, the vice president of Chinese Academy of Engineering and the president of Central Iron & Steel Research Institute, China.

Download or read book Corrosion Failures written by K. Elayaperumal and published by John Wiley & Sons. This book was released on 2015-04-27 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides corrosion basics in a lucid manner to students and working professionals and over 80 corrosion-failure analysis case studies Correlates Failure Analysis with Corrosion Science Exclusively provides corrosion-related failure analysis case histories in one place in a convenient format One-stop shop for both science and real time occurrence of the phenomenon of corrosion Full coverage of all MOC, Materials of Construction, used for process equipments Simple but Lucid presentation of Failure Analysis procedure

Download or read book Materials for High Temperature Power Generation and Process Plant Applications written by A. Strang and published by CRC Press. This book was released on 2000 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 2001. Routledge is an imprint of Taylor & Francis, an informa company.

Download or read book Metallic Materials Specification Handbook written by R. B. Ross and published by Springer. This book was released on 1980 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt: