Download or read book Data Book on Hydrocarbons written by J. B. Maxwell and published by . This book was released on 1950 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical constants. Characteristics of petroleum fractions. Molecular weight. Vapor pressure. Fugacity. Critical properties. Thermal properties. Density. Viscosity. Combustion. Flow of fluids. Flow of heat. Equilibrium flash vaporization. Fractionating towers.
Download or read book Data Book on Hydrocarbons written by J. B. Maxwell and published by . This book was released on 1950 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermophysical Properties of Chemicals and Hydrocarbons written by Carl L. Yaws and published by William Andrew. This book was released on 2014-06-20 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compiled by an expert in the field, the book provides an engineer with data they can trust. Spanning gases, liquids, and solids, all critical properties (including viscosity, thermal conductivity, and diffusion coefficient) are covered. From C1 to C100 organics and Ac to Zr inorganics, the data in this handbook is a perfect quick reference for field, lab or classroom usage. By collecting a large – but relevant – amount of information in one source, the handbook enables engineers to spend more time developing new designs and processes, and less time collecting vital properties data. This is not a theoretical treatise, but an aid to the practicing engineer in the field, on day-to-day operations and long range projects. - Simplifies research and significantly reduces the amount of time spent collecting properties data - Compiled by an expert in the field, the book provides an engineer with data they can trust in design, research, development and manufacturing - A single, easy reference for critical temperature dependent properties for a wide range of hydrocarbons, including C1 to ClOO organics and Ac to Zr inorganics
Download or read book Seismic Data Interpretation and Evaluation for Hydrocarbon Exploration and Production written by Niranjan C. Nanda and published by Springer. This book was released on 2016-03-10 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to the field of seismic data interpretation and evaluation, covering themes such as petroleum exploration and high resolution seismic data. It helps geoscientists and engineers who are practitioners in this area to both understand and to avoid the potential pitfalls of interpreting and evaluating such data, especially the over-reliance on sophisticated software packages and workstations alongside a lack of grasp on the elementary principles of geology and geophysics. Chapters elaborate on the necessary principles, from topics like seismic wave propagation and rock-fluid parameters to seismic modeling and inversions, explaining the need to understand geological implications. The difference between interpretation of data and its evaluation is highlighted and the author encourages imaginative, logical and practical application of knowledge. Readers will appreciate the exquisite illustrations included with the accessibly written text, which simplify the process of learning about interpretation of seismic data. This multidisciplinary, integrated and practical approach to data evaluation will prove to be a valuable tool for students and young professionals, especially those connected with oil companies.
Download or read book Transport Properties of Chemicals and Hydrocarbons written by Carl L. Yaws and published by William Andrew. This book was released on 2014-06-20 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering more than 7,800 organic and inorganic chemicals and hydrocarbons, Transport Properties of Chemical and Hydrocarbons, Second Edition is an essential volume for any chemist or chemical engineer. Spanning gases, liquids, and solids, the book covers all critical properties (including viscosity, thermal conductivity, and diffusion coefficient). From C1 to C100 organics and Ac to Zr inorganics, the data in this handbook is a perfect quick reference for field, lab, or classroom use. By collecting a massive – but relevant – amount of information in one source, the handbook enables engineers to spend more time developing new designs and processes, and less time collecting vital properties data. This is not a theoretical treatise, but an aid to the practicing engineer in the field, on day-to-day operations and long-range projects. - Simplifies research and significantly reduces the amount of time spent collecting properties data - Compiled by an expert in the field, the book provides engineers with data they can trust - All critical properties are covered for ease of reference, including viscosity, thermal conductivity, and diffusion coefficient
Download or read book Data Book on Hydrocarbons written by J. B. Maxwell and published by . This book was released on 1950 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical constants. Characteristics of petroleum fractions. Molecular weight. Vapor pressure. Fugacity. Critical properties. Thermal properties. Density. Viscosity. Combustion. Flow of fluids. Flow of heat. Equilibrium flash vaporization. Fractionating towers.
Download or read book Handbook of Chemical Compound Data for Process Safety written by Carl L. Yaws and published by Elsevier. This book was released on 1997-03-25 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive safety and health-related data for hydrocarbons and organic chemicals as well as selected data for inorganic chemicals.
Download or read book Seismic Data Analysis Techniques in Hydrocarbon Exploration written by Enwenode Onajite and published by Elsevier. This book was released on 2013-09-26 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic Data Analysis Techniques in Hydrocarbon Exploration explains the fundamental concepts and skills used to acquire seismic data in the oil industry and the step-by-step techniques necessary to extract the sections that trap hydrocarbons as well as seismic data interpretation skills. It enhances the ability to interpret seismic data and use that data for basin evaluation, structural modeling of a fault, reservoir characterization, rock physics analysis, field development, and production studies. Understanding and interpreting seismic data is critical to oil and gas exploration companies. Arming young geoscientists with a reference that covers the key principles of seismic data analysis will enhance their job knowledge, skills and performance. A fundamental grasp of seismic data enhances employability and aids scientists in functioning effectively when working with seismic data in industry. - Edited by a team of petroleum geoscientists with more than 30 years of experience in hydrocarbon exploration and data analysis at O&G companies. - More than 200 figures, photographs, and illustrations aid in the understanding of the fundamental concepts and techniques used to acquire seismic data - Takes an easy-to-follow, step-by-step approach to presenting the techniques and skills used to extract the geologic sections from acquired seismic data. - Enhances the geoscientist's effectiveness when using seismic data for field development and other exploration and production studies
Download or read book Handbook of Industrial Hydrocarbon Processes written by James G. Speight and published by Gulf Professional Publishing. This book was released on 2010-12-24 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an author with over 38 years of experience in the chemical and petrochemical process industry, this handbook will present an analysis of the process steps used to produce industrial hydrocarbons from various raw materials. It is the first book to offer a thorough analysis of external factors effecting production such as: cost, availability and environmental legislation. An A-Z list of raw materials and their properties are presented along with a commentary regarding their cost and availability. Specific processing operations described in the book include: distillation, thermal cracking and coking, catalytic methods, hydroprocesses, thermal and catalytic reforming, isomerization, alkylation processes, polymerization processes, solvent processes, water removal, fractionation and acid gas removal. - Flow diagrams and descriptions of more than 250 leading-edge process technologies - An analysis of chemical reactions and process steps that are required to produce chemicals from various raw materials - Properties, availability and environmental impact of various raw materials used in hydrocarbon processing
Download or read book Total Petroleum Hydrocarbons written by Saranya Kuppusamy and published by Springer. This book was released on 2019-08-13 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: The term “total petroleum hydrocarbons” (TPHs) is used for any mixture of several hundred hydrocarbons found in crude oil, and they represent the sum of volatile petroleum hydrocarbons and extractable petroleum hydrocarbons. The petrol-range organics include hydrocarbons from C6 to C10, while diesel-range organics are C10-C28 hydrocarbons. Environmental pollution by petroleum hydrocarbons is one of the major global concerns, particularly in oil-yielding countries. In fact, there are more than five million potentially contaminated areas worldwide that represent, in general, a lost economic opportunity and a threat to the health and well-being of humans and the environment. Petroleum-contaminated sites constitute almost one-third of the total sites polluted with chemicals around the globe. The land contamination caused by industrialization was recognized as early as the 1960s, but less than a tenth of potentially contaminated lands have been remediated due to the nature of the contamination, cost, technical impracticability, and insufficient land legislation and enforcement. This book is the first single source that provides comprehensive information on the different aspects of TPHs, such as sources and range of products, methods of analysis, fate and bioavailability, ecological implications including impact on human health, potential approaches for bioremediation such as risk-based remediation, and regulatory assessment procedures for TPH-contaminated sites. As such, it is a valuable resource for researchers, graduate students, technicians in the oil industry and remediation practitioners, as well as policy makers.
Download or read book Polycyclic Aromatic Hydrocarbons written by Ronald G. Harvey and published by CUP Archive. This book was released on 1991-11-07 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 1991 volume was the first to review the chemical properties of the carcinogenic polycyclic aromatic hydrocarbons.
Download or read book Insect Hydrocarbons written by Gary J. Blomquist and published by Cambridge University Press. This book was released on 2010-02-04 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique and critical analysis of the wealth of research conducted on the biology, biochemistry and chemical ecology of the rapidly growing field of insect cuticular hydrocarbons. Authored by leading experts in their respective fields, the twenty chapters show the complexity that has been discovered in the nature and role of hydrocarbons in entomology. Covers, in great depth, aspects of chemistry (structures, qualitative and quantitative analysis), biochemistry (biosynthesis, molecular biology, genetics, evolution), physiology, taxonomy, and ecology. Clearly presents to the reader the array of data, ideas, insights and historical disagreements that have been accumulated during the past half century. An emphasis is placed on the role of insect hydrocarbons in chemical communication, especially among the social insects. Includes the first review on the chemical synthesis of insect hydrocarbons. The material presented is a major resource for current researchers and a source of ideas for new researchers.
Download or read book The Yaws Handbook of Physical Properties for Hydrocarbons and Chemicals written by Carl L. Yaws and published by Gulf Professional Publishing. This book was released on 2015-01-06 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: Refineries and petrochemical engineers today are accepting more unconventional feedstocks such as heavy oil and shale, causing unique challenges on the processing side of the business. To create more reliable engineering design of process equipment for the petrochemical industry, petroleum engineers and process managers are forced to study the physical properties and compounds of these particular hydrocarbons. Instead of looking up each compound's information, The Yaws Handbook of Physical Properties for Hydrocarbons and Chemicals, Second Edition presents an easy-to-use format with rapid access to search for the particular compound and understand all the complex calculations in one tabular format. Understanding the composition of hydrocarbons is not easy to calculate quickly or accurately, but this must-have reference leads the engineer to better estimated properties and fractions from easily measured components. Expanded to cover more total compounds and relevant functions, The Yaws Handbook of Physical Properties for Hydrocarbons and Chemicals, Second Edition remains a necessary reference tool for every petrochemical and petroleum engineers' library. - Coverage added on elements for hydrocarbons and chemicals with more than 200 real-world cases included for practicality - Increased compound coverage from 41,000 to 54,000 total compounds to quickly access for everyday use - New functions added such as testing boiling point temperature and new data on density and refractory index
Download or read book Materials Selection for Hydrocarbon and Chemical Plants written by David A. Hansen and published by Routledge. This book was released on 2017-11-22 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the systematic procedure for using process and mechanical design information to select construction materials suitable for a range of chemical and hydrocarbon processing plants. The volume features tables for locating the American Society for Testing and Materials (ASTM) product form specifications for construction materials that have code-allowable design stresses. It analyzes threshold values for degradation phenomena involving thermal damage.
Download or read book Polycyclic Hydrocarbons written by Eric Clar and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polycyclic hydrocarbons are of interest in many fields of science: theoretical chemistry, physical chemistry, organic chemistry, dyestuff chemistry and biology. With regard to the latter, I am indebted to Dr. Regina Schoental of the Medical Research Council for the review in this present work of carcinogenesis by polycyclic hydrocarbons. This book is designed to present the facts in a simple and clear order and to derive empirical rules from them, but it does not present a com prehensive theory about polycyclic hydrocarbons. An attempt is made instead to extend classical symbolism into modern structural chemistry. Thus extensive use is made of Robinson's aromatic sextet, which is applied in an uncompromising and strict way. This quasi-classical attempt is encouraged further by such completely unexpected dis coveries as those of Dewar benzene and of the electronic asymmetry of formally symmetric hydrocarbons. How difficult it is to break away from any established way of thinking has been admirably expressed by Kekule ("Organische Chemie", 1861, Part 1, page 4, translated from the German): "All our ideas are based, to an extent much greater than we ordinarily believe, on those of our predecessors. Our accumulated experience, the notions of which our training has accustomed us to, of whatever kind they have been, influence the course of our thoughts far more than we are willing to admit; only too frequently the following of our regularly used, well trodden way of thinking leads us to overlook the simplest of correlations.
Download or read book Natural Gas Seepage written by Giuseppe Etiope and published by Springer. This book was released on 2015-01-30 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book offers a modern, comprehensive, and holistic view of natural gas seepage, defined as the visible or invisible flow of gaseous hydrocarbons from subsurface sources to Earth’s surface. Beginning with definitions, classifications for onshore and offshore seepage, and fundamentals on gas migration mechanisms, the book reports the latest findings for the global distribution of gas seepage and describes detection methods. Seepage implications are discussed in relation to petroleum exploration, environmental impacts (hazards, pollution, atmospheric emissions, and past climate change), emerging scientific issues (abiotic gas and methane on Mars), and the role of seeps in ancient cultures. With an updated bibliography and an integrated analysis of available data, the book offers a new fundamental awareness - gas seepage is more widespread than previously thought and influences all of Earth’s external “spheres”, including the hydrosphere, atmosphere, biosphere, and anthroposphere.
Download or read book Transportation Energy Data Book written by and published by . This book was released on 1998 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt:
