Download or read book Cryogenic Heat Transfer written by Randall F. Barron and published by Taylor & Francis. This book was released on 1999-05-01 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents applied heat transfer principles in the range of extremely low temperatures. The specific features of heat transfer at cryogenic temperatures, such as variable properties, near critical convection, and Kapitza resistance, are described. This book includes many example problems, in each section, that help to illustrate the applications of t
Download or read book Cryogenic Heat Transfer written by Randall F. Barron and published by CRC Press. This book was released on 2017-12-19 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cryogenic Heat Transfer, Second Edition continues to address specific heat transfer problems that occur in the cryogenic temperature range where there are distinct differences from conventional heat transfer problems. This updated version examines the use of computer-aided design in cryogenic engineering and emphasizes commonly used computer programs to address modern cryogenic heat transfer problems. It introduces additional topics in cryogenic heat transfer that include latent heat expressions; lumped-capacity transient heat transfer; thermal stresses; Laplace transform solutions; oscillating flow heat transfer, and computer-aided heat exchanger design. It also includes new examples and homework problems throughout the book, and provides ample references for further study. New in the Second Edition: Expands on thermal properties at cryogenic temperatures to include latent heats and superfluid helium Develops the material on conduction heat transfer and divides it into four separate chapters to facilitate understanding of the separate features and computational techniques in conduction heat transfer Introduces EES (Engineering Equation Solver), a computer-aided design tool, and other computer applications such as Maple Describes special features of heat transfer at cryogenic temperatures such as analysis with variable thermal properties, heat transfer in the near-critical region, Kapitza conductance, and network analysis for free-molecular heat transfer Includes design procedures for cryogenic heat exchangers Cryogenic Heat Transfer, Second Edition discusses the unique problems surrounding conduction heat transfer at cryogenic temperatures. This second edition incorporates various computational software methods, and provides expanded and updated topics, concepts, and applications throughout. The book is designed as a textbook for students interested in thermal problems occurring at cryogenic temperatures and also serves as reference on heat transfer material for practicing cryogenic engineers.
Download or read book Cryogenic Heat Transfer written by Randall F. Barron and published by CRC Press. This book was released on 2017-12-19 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cryogenic Heat Transfer, Second Edition continues to address specific heat transfer problems that occur in the cryogenic temperature range where there are distinct differences from conventional heat transfer problems. This updated version examines the use of computer-aided design in cryogenic engineering and emphasizes commonly used computer programs to address modern cryogenic heat transfer problems. It introduces additional topics in cryogenic heat transfer that include latent heat expressions; lumped-capacity transient heat transfer; thermal stresses; Laplace transform solutions; oscillating flow heat transfer, and computer-aided heat exchanger design. It also includes new examples and homework problems throughout the book, and provides ample references for further study. New in the Second Edition: Expands on thermal properties at cryogenic temperatures to include latent heats and superfluid helium Develops the material on conduction heat transfer and divides it into four separate chapters to facilitate understanding of the separate features and computational techniques in conduction heat transfer Introduces EES (Engineering Equation Solver), a computer-aided design tool, and other computer applications such as Maple Describes special features of heat transfer at cryogenic temperatures such as analysis with variable thermal properties, heat transfer in the near-critical region, Kapitza conductance, and network analysis for free-molecular heat transfer Includes design procedures for cryogenic heat exchangers Cryogenic Heat Transfer, Second Edition discusses the unique problems surrounding conduction heat transfer at cryogenic temperatures. This second edition incorporates various computational software methods, and provides expanded and updated topics, concepts, and applications throughout. The book is designed as a textbook for students interested in thermal problems occurring at cryogenic temperatures and also serves as reference on heat transfer material for practicing cryogenic engineers.
Download or read book Cryogenic Heat Management written by Jonathan Demko and published by CRC Press. This book was released on 2022-07-21 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cryogenic engineering (cryogenics) is the production, preservation, and use or application of cold. This book presents a comprehensive introduction to designing systems to deal with heat – effective management of cold, exploring the directing (or redirecting), promoting, or inhibiting this flow of heat in a practical way. It provides a description of the necessary theory, design methodology, and advanced demonstrations (thermodynamics, heat transfer, thermal insulation, fluid mechanics) for many frequently occurring situations in low-temperature apparatus. This includes systems that are widely used such as superconducting magnets for magnetic resonance imaging (MRI), high-energy physics, fusion, tokamak and free electron laser systems, space launch and exploration, and energy and transportation use of liquid hydrogen, as well as potential future applications of cryo-life sciences and chemical industries. The book is written with the assumption that the reader has an undergraduate understanding of thermodynamics, heat transfer, and fluid mechanics, in addition to the mechanics of materials, material science, and physical chemistry. Cryogenic Heat Management: Technology and Applications for Science and Industry will be a valuable guide for those researching, teaching, or working with low-temperature or cryogenic systems, in addition to postgraduates studying the topic. Key features: Presents simplified but useful and practical equations that can be applied in estimating performance and design of energy-efficient systems in low-temperature systems or cryogenics Contains practical approaches and advanced design materials for insulation, shields/anchors, cryogen vessels/pipes, calorimeters, cryogenic heat switches, cryostats, current leads, and RF couplers Provides a comprehensive introduction to the necessary theory and models needed for solutions to common difficulties and illustrates the engineering examples with more than 300 figures
Download or read book Cryogenic Heat Transfer written by Randall F. Barron and published by Hemisphere Pub. This book was released on 1999 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Throughout the book, example problems are given in each section to illustrate the application of the principles presented. The specific features of heat transfer at cryogenic temperatures (variable properties, near critical convection, Kapitza resistance, etc.) are also included. Extensive references are given for the person interested in further study. Aimed at the reader who has completed an undergraduate engineering heat transfer course, this text is written for students in cryogenic heat transfer, cryogenic systems, and refrigeration. It will also be an excellent reference for practicing engineers to assist them in the design of cryogenic thermal systems.
Download or read book Advances in Cryogenic Engineering written by K.D. Timmerhaus and published by Springer Science & Business Media. This book was released on 2013-12-14 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 1961 Cryogenic Engineering Conference Committee is pleased to present the papers of the 1961 Cryogenic Engineering Conference. We are grateful to have had the University of Michigan at Ann Arbor, Michigan as our host for the seventh annual meeting of this group. The Conference Committee in presenting the papers oftbis Conference takes this opportunity to acknowledge the assistance of an Editorial Committee in the selection of papers for the program. Since over one hundred and twenty papers were submitted, their task of screening and evaluating the papers was a dif ficult one. The Committee guided by G. j. V an Wylen, who also served as chair man of the Conference Committee, included R. W. Arnett, B. W. Birmingham, D. B. Chelton, R. j. Corruccini, C. j. Guntner, M. j. Hiza, R. B. jacobs, A. J. Kidnay, R. H. Kropschot, j. Macinko, D. B. Mann, R. P. Mikesell, R. L. Powell, J. R. Purcell, R. P. Reed, R. j. Richards, A. F. Schmidt, R. B. Stewart, and K. A. Warren.
Download or read book Cryogenic Heat Transfer 1991 written by Alexander S. Adorjan and published by . This book was released on 1991 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Cryogenic Heat Transfer written by J. R. Bartlit and published by . This book was released on 1968 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Survey of the Literature on Heat Transfer from Solid Surfaces to Cryogenic Fluids written by Robert J. Richards and published by . This book was released on 1961 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: A bibliography of 156 references in heat transfer from solid surfaces to fluids and related phenomena is presented. Heat transfer data obtained from experimental work on cryogenic fluids are presented in graphical form. The theoretical and empirical formulations appearing in the references are presented. In those cases where sufficient information is available to make numerical computations, the formulations are presented graphically to permit comparison with the results of the experimental work.
Download or read book Advances in Cryogenic Engineering written by K. D. Timmerhaus and published by Springer Science & Business Media. This book was released on 2013-11-09 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: The University of Colorado and the National Bureau of Standards have once again served as hosts for the Cryogenic Engineering Conference in Boulder, Colorado. In presenting the papers of this twelfth annual meeting, the 1966 Cryogenic Engineering Conference Committee has again recognized the excellent cooperation which has existed between these two organizations over the past decade with regard to both cryogenic research and conference activity. This cooperation was demonstrated not only at the 1966 Cryogenic Engineering Conference but also at the International Institute of Refrigeration, Commission I Meeting, which was also hosted by these two organizations immediately following the Cryogenic Engineering Conference. These two meetings have provided attendees with one of the most comprehensive coverages of cryogenic topics that has ever been presented at one location. Emphasis on major international advances in helium technology at the International Institute of Refrigeration, Commission I Meeting has been possible largely through the National Science Foundation Grant GK 1116 to the University of Colorado. The Cryogenic Engineering Conference Committee gratefully acknowledges this support because of its valuable international contribution to the Cryogenic Engineering Conference. As in the past, the Cryogenic Engineering Conference Committee is grateful for the continued assistance of all the dedicated workers in the cryogenic field who have contributed their time reviewing the preliminary papers for the program and the final manuscripts for this volume.
Download or read book Heat Transfer at Low Temperatures written by Walter Frost and published by Springer Science & Business Media. This book was released on 2013-11-22 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purposes of this book are to provide insight and to draw attention to problems peculiar to heat transfer at low temperatures. This does not imply that the theories of classical heat transfer fail at low temperatures, but rather that many of the approximations employed in standard solutions techniques are not valid in this regime. Physical properties, for example, have more pronounced variations at low temperatures and cannot, as is conventionally done, be held constant. Fluids readily become mixtures of two or more phases and their analysis is different from that for a single-phase fluid. These and other problems which occur more frequently at low temperatures than at standard conditions are discussed in this book. Although the title specifies heat transfer, the book also contains a very comprehensive chapter on two-phase fluid flow and a partial chapter on the flow of fluids in the thermodynamically critical state. Emphasis is placed on those flow phenomena that occur at low temperatures. Flow analyses are, of course, a prerequisite to forced-convection heat transfer analyses, and thus these chapters add continuity to the text. The book is primarily written for the design engineer, but does broach many topics which should prove interesting to the researcher. For the student and teacher the book will serve as a useful reference and possibly as a text for a special topics course in heat transfer.
Download or read book Cryogenic Heat Management written by Jonathan Demko and published by . This book was released on 2022 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "Cryogenic engineering (cryogenics) is the production, preservation, and use of the cold. As long as there are two different temperatures, and some physical proximity or connection between the two, the heat is flowing. This book presents a comprehensive introduction into the management, preservation and efficient use of the cold, exploring the directing (or redirecting), organizing, promoting or inhibiting this flow of heat in a practical way. This book provides a description of the necessary theory, design methodology and advanced demonstrations (thermodynamics, heat transfer, thermal insulation, fluid mechanics) for many frequently occurring situations in low temperature apparatus. This includes systems that are widely used such as magnets for MRI, HEP, fusion (tokamak systems); space explorations; as well as potential future applications of cryo-life-sciences and chemical industrials. It assumes that the reader has had an undergraduate understanding of thermodynamics, heat transfer, and fluid mechanics, in addition to the mechanics of materials and material science. It will be a valuable guide for those researching or working with low temperature, or cryogenic systems, of postgradutes studying the topic"--
Download or read book Helium Cryogenics written by Steven W. Van Sciver and published by Springer Science & Business Media. This book was released on 2012-03-14 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Twenty five years have elapsed since the original publication of Helium Cryogenics. During this time, a considerable amount of research and development involving helium fluids has been carried out culminating in several large-scale projects. Furthermore, the field has matured through these efforts so that there is now a broad engineering base to assist the development of future projects. Helium Cryogenics, 2nd edition brings these advances in helium cryogenics together in an updated form. As in the original edition, the author's approach is to survey the field of cryogenics with emphasis on helium fluids. This approach is more specialized and fundamental than that contained in other cryogenics books, which treat the associated range of cryogenic fluids. As a result, the level of treatment is more advanced and assumes a certain knowledge of fundamental engineering and physics principles, including some quantum mechanics. The goal throughout the work is to bridge the gap between the physics and engineering aspects of helium fluids to provide a source for engineers and scientists to enhance their usefulness in low-temperature systems. Dr. Van Sciver is a Distinguished Research Professor and John H. Gorrie Professor of Mechanical Engineering at Florida State University. He is also a Program Director at the National High Magnetic Field Laboratory (NHMFL). Dr. Van Sciver joined the FAMU-FSU College of Engineering and the NHMFL in 1991, initiating and teaching a graduate program in magnet and materials engineering and in cryogenic thermal sciences and heat transfer. He also led the NHMFL development efforts of the cryogenic systems for the NHMFL Hybrid and 900 MHz NMR superconducting magnets. Between 1997 and 2003, he served as Director of Magnet Science and Technology at the NHMFL. Dr. Van Sciver is a Fellow of the ASME and the Cryogenic Society of America and American Editor for the journal Cryogenics. He is the 2010 recipient of the Kurt Mendelssohn Award. Prior to joining Florida State University, Dr. Van Sciver was Research Scientist and then Professor of Nuclear Engineering, Engineering Physics and Mechanical Engineering at the University of Wisconsin-Madison from 1976 to 1991. During that time he also served as the Associate Director of the Applied Superconductivity Center. Dr. Van Sciver received his PhD in Low Temperature Physics from the University of Washington-Seattle in 1976. He received his BS degree in Engineering Physics from Lehigh University in 1970. Dr. Van Sciver is author of over 200 publications and patents in low temperature physics, liquid helium technology, cryogenic engineering and magnet technology. The first edition of Helium Cryogenics was published by Plenum Press (1986). The present work is an update and expansion of that original project.
Download or read book Cryogenic Regenerative Heat Exchangers written by Robert A. Ackermann and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: An in-depth survey of regenerative heat exchangers, this book chronicles the development and recent commercialization of regenerative devices for cryogenic applications. Chapters cover historical background, concepts, practical applications, design data, and numerical solutions, providing the latest information for engineers to develop advanced cryogenic machines. The discussions include insights into the operation of a regenerator; descriptions of the cyclic and fluid temperature distributions in a regenerator; data for various matrix geometries and materials, including coarse and fine bronze, stainless steel-woven wire mesh screens, and lead spheres; and unique operating features of cryocoolers that produce deviations from ideal regenerator theory.
Download or read book Heat Exchanger Design Handbook written by and published by . This book was released on 1983 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermodynamic Properties of Cryogenic Fluids written by Jacob W. Leachman and published by Springer. This book was released on 2017-07-30 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This update to a classic reference text provides practising engineers and scientists with accurate thermophysical property data for cryogenic fluids. The equations for fifteen important cryogenic fluids are presented in a basic format, accompanied by pressure-enthalpy and temperature-entropy charts and tables of thermodynamic properties. It begins with a chapter introducing the thermodynamic relations and functional forms for equations of state, and goes on to describe the requirements for thermodynamic property formulations, needed for the complete definition of the thermodynamic properties of a fluid. The core of the book comprises extensive data tables and charts for the most commonly-encountered cryogenic fluids. This new edition sees significant updates to the data presented for air, argon, carbon monoxide, deuterium, ethane, helium, hydrogen, krypton, nitrogen and xenon. The book supports and complements NIST’s REFPROP - an interactive database and tool for the calculation of thermodynamic properties of cryogenic fluids.
Download or read book A Text Book Of Cryogenics written by Valery V. Kostionk and published by Discovery Publishing House. This book was released on 2003 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is prepared on various sections of cryogenics: properties of cryogenic products and solid bodies at low temperatures, methods of internal cooling, heat transfer at low temperatures, gas liquefaction and separation, micro-cryogenic systems, storage and transport of cryogenic fluids, and cryogenic systems for scientific research and development. Contents: Properties of Cryogenic Products and their use, Helium Properties Superfluidity, Properties of Solid Bodies at Low Temperatures, Classification of Cryogenic Systems, Thermomechanical Processes of Internal Cooling: Throttling and Expanding, Thermomechanical Processes of Internal Cooling: Exhaust, Vapor Pump-out, Desorption, Low Literature Thermodynamics Cycles, Electromagnetic Methods of Cooling, Cooling Methods Based on Specific Properties of Helium Isotopes, Heat Transfer at Low Temperatures, Gas Liquefaction and Separation Systems, Microcryogenic Systems, Liquid and Solid-state Microcryogenic Systems, Storage and Transportation of Cryogenic Fluids, Processes in Cryogenic Vessels, Cryogenic Systems for Scientific Research.
