Download or read book Small Fatigue Cracks written by K.S. Ravichandran and published by Elsevier. This book was released on 1999-09-30 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the fully peer-reviewed papers presented at the Third Engineering Foundation Conference on Small Fatigue Cracks, held under the chairmanship of K.S. Ravichandran and Y. Murakami during December 6-11, 1998, at the Turtle Bay Hilton, Oahu, Hawaii. This book presents a state-of-the-art description of the mechanics, mechanisms and applications of small fatigue cracks by most of the world's leading experts in this field. Topics ranging from the mechanisms of crack initiation, small crack behavior in metallic, intermetallic, ceramic and composite materials, experimental measurement, mechanistic and theoretical models, to the role of small cracks in fretting fatigue and the application of small crack results to the aging aircraft and high-cycle fatigue problems, are covered.
Download or read book Fatigue Crack Growth in Rubber Materials written by Gert Heinrich and published by Springer Nature. This book was released on 2021-03-23 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book summarizes recent international research and experimental developments regarding fatigue crack growth investigations of rubber materials. It shows the progress in fundamental as well as advanced research of fracture investigation of rubber material under fatigue loading conditions, especially from the experimental point of view. However, some chapters will describe the progress in numerical modeling and physical description of fracture mechanics and cavitation phenomena in rubbers. Initiation and propagation of cracks in rubber materials are dominant phenomena which determine the lifetime of these soft rubber materials and, as a consequence, the lifetime of the corresponding final rubber parts in various fields of application. Recently, these phenomena became of great scientific interest due to the development of new experimental methods, concepts and models. Furthermore, crack phenomena have an extraordinary impact on rubber wear and abrasion of automotive tires; and understanding of crack initiation and growth in rubbers will help to support the growthing number of activities and worldwide efforts of reduction of tire wear losses and abrasion based emissions.
Download or read book Mechanics of Crack Growth written by J. R. Rice and published by ASTM International. This book was released on 1976 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical damage and crack growth in concrete written by Alberto Carpinteri and published by Springer. This book was released on 2011-09-27 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following Volumes III and IV that dealt with the fracture mechanics of concrete emphasizing both material testing and structural application in general, it was felt that specimen size and loading rate effects for concrete require further attention. The only criterion that has thus far successfully linearized the highly nonlinear crack growth data of concrete is the strain energy density theory. In particular, the crack growth resistance curves plotting the strain energy density factor versus crack growth known as the SR·curves are straight lines as specimen size and loading steps or rates are altered. This allows the extrapolation of data and provides a useful design methodology. This book is unique in that it is devoted specifically to the application of the strain energy density theory to civil engineering structural members made of concrete. Analyzed in detail is the strain softening behavior of concrete for a variety of different components including the influence of steel reinforcement. Permanent damage of the material is accounted for each increment of loading by invoking the mechanism of elastic unloading. This assumption is justified in concrete structures where the effective stiffness depends primarily on the crack growth rate and load history. Crack growth data are presented in terms of SR-curves with emphases placed on scaling specimen size which alone can change the mode of failure from plastic collapse to brittle fracture. Loading rate effects can also be scaled to control failure by yielding and fracture.
Download or read book The measurement of crack growth resistance using yielding fracture mechanics written by Stephen John Garwood and published by . This book was released on 1977 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanics of Fatigue Crack Closure written by Wolf Elber and published by ASTM International. This book was released on 1988 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramics written by Dietrich Munz and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gives a description of the failure phenomena of ceramic materials under mechanical loading, the methods to determine their properties, and the principles for material selection. The book presents fracture mechanical and statistical principles and their application to describe the scatter of strength and lifetime, while special chapters are devoted to creep behaviour, multiaxial failure criteria and thermal shock behaviour. XXXXXXX Neuer Text Describing how ceramic materials fracture and fail under mechanical loading, this book provides methods for determining the properties of ceramics, and gives criteria for selecting ceramic materials for particular applications. It also examines the fracture-mechanical and statistical principles and their use in understanding the strength and durability of ceramics. Special chapters are devoted to creep behavior, criteria for multiaxial failure, and behavior under thermal shock. Readers will gain insight into the design of reliable ceramic components.
Download or read book Major Accomplishments in Composite Materials and Sandwich Structures written by I. M. Daniel and published by Springer Science & Business Media. This book was released on 2009-10-20 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects major research contributions in composite materials and sandwich structures supported by the U.S. Office of Naval Research. It contains over thirty chapters written by experts and serves as a reference and guide for future research.
Download or read book Fracture Mechanics and Crack Growth written by Naman Recho and published by John Wiley & Sons. This book was released on 2012-12-27 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances related to the following two topics: how mechanical fields close to material or geometrical singularities such as cracks can be determined; how failure criteria can be established according to the singularity degrees related to these discontinuities. Concerning the determination of mechanical fields close to a crack tip, the first part of the book presents most of the traditional methods in order to classify them into two major categories. The first is based on the stress field, such as the Airy function, and the second resolves the problem from functions related to displacement fields. Following this, a new method based on the Hamiltonian system is presented in great detail. Local and energetic approaches to fracture are used in order to determine the fracture parameters such as stress intensity factor and energy release rate. The second part of the book describes methodologies to establish the critical fracture loads and the crack growth criteria. Singular fields for homogeneous and non-homogeneous problems near crack tips, v-notches, interfaces, etc. associated with the crack initiation and propagation laws in elastic and elastic-plastic media, allow us to determine the basis of failure criteria. Each phenomenon studied is dealt with according to its conceptual and theoretical modeling, to its use in the criteria of fracture resistance; and finally to its implementation in terms of feasibility and numerical application. Contents 1. Introduction. Part 1: Stress Field Analysis Close to the Crack Tip 2. Review of Continuum Mechanics and the Behavior Laws. 3. Overview of Fracture Mechanics. 4. Fracture Mechanics. 5. Introduction to the Finite Element Analysis of Cracked Structures. Part 2: Crack Growth Criteria 6. Crack Propagation. 7. Crack Growth Prediction in Elements of Steel Structures Submitted to Fatigue. 8. Potential Use of Crack Propagation Laws in Fatigue Life Design.
Download or read book Advanced Fracture Mechanics and Structural Integrity written by Ashok Saxena and published by CRC Press. This book was released on 2019-02-06 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Fracture Mechanics and Structural Integrity is organized to cover quantitative descriptions of crack growth and fracture phenomena. The mechanics of fracture are explained, emphasizing elastic-plastic and time-dependent fracture mechanics. Applications are presented, using examples from power generation, aerospace, marine, and chemical industries, with focus on predicting the remaining life of structural components and advanced testing metods for structural materials. Numerous examples and end-of-chapter problems are provided, along with references to encourage further study.The book is written for use in an advanced graduate course on fracture mechanics or structural integrity.
Download or read book Mechanical damage and crack growth in concrete written by Alberto Carpinteri and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following Volumes III and IV that dealt with the fracture mechanics of concrete emphasizing both material testing and structural application in general, it was felt that specimen size and loading rate effects for concrete require further attention. The only criterion that has thus far successfully linearized the highly nonlinear crack growth data of concrete is the strain energy density theory. In particular, the crack growth resistance curves plotting the strain energy density factor versus crack growth known as the SR·curves are straight lines as specimen size and loading steps or rates are altered. This allows the extrapolation of data and provides a useful design methodology. This book is unique in that it is devoted specifically to the application of the strain energy density theory to civil engineering structural members made of concrete. Analyzed in detail is the strain softening behavior of concrete for a variety of different components including the influence of steel reinforcement. Permanent damage of the material is accounted for each increment of loading by invoking the mechanism of elastic unloading. This assumption is justified in concrete structures where the effective stiffness depends primarily on the crack growth rate and load history. Crack growth data are presented in terms of SR-curves with emphases placed on scaling specimen size which alone can change the mode of failure from plastic collapse to brittle fracture. Loading rate effects can also be scaled to control failure by yielding and fracture.
Download or read book The Life of Cracks written by Srečko Glodež and published by Cambridge Scholars Publishing. This book was released on 2020-07-13 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many people find the concept of fracture and damage mechanics to be somewhat problematic, mainly because, until recently, close attention in mechanics was focused especially on the strength and resistance of materials. In this sense, to speak of fracture is as uncomfortable for some as it is to speak of a deadly disease. In confronting and preventing a fatal disease, one must understand its complexity, symptoms, and behavior; by the same token, in securing the strength of an engineering structure, one must understand the reasons and type of its potential failure. This book will provide knowledge and insights on this matter to its readers.
Download or read book Crack Growth Resistance Characteristics of High Strength Sheet Alloys written by C. N. Freed and published by . This book was released on 1972 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crack propagation in a metal sheet is impeded by the inherent resistance to fracture of the alloy. This resistance is manifested by the requirement that crack growth will occur only under a rising load up to an instability load at which unstable fracture commences. If the fracture resistance curve which designates the load-crack extension relationship to instability has a unique shape for each material and is independent of most specimen dimensions, it can be a valuable tool in failure-safe design. The fracture resistance curves (R-curves) have been obtained for six high-strength sheet alloys which fractured under elastic loads. The influence of three specimen geometric variables and yield strength on the shape of the R-curve and the critical stress-intensity factor K sub c was investigated. On several alloys a comparison was made between the R-curve and K sub c value generated with a center-cracked tension (CCT) specimen and data derived from a crack-line loaded (CLL) specimen used at Armco Steel Corporation. (Author).
Download or read book Nano and Microstructural Design of Advanced Materials written by M. A. Meyers and published by Elsevier. This book was released on 2003-12-05 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of the nanoscale effects has been recognized in materials research for over fifty years, but it is only recently that advanced characterization and fabrication methods are enabling scientists to build structures atom-by-atom or molecule-by molecule. The understanding and control of the nanostructure has been, to a large extent, made possible by new atomistic analysis and characterization methods pioneered by transmission electron microscopy. Nano and Microstructural Design of Advanced Materials focuses on the effective use of such advanced analysis and characterization techniques in the design of materials. - Teaches effective use of advanced analysis and characterization methods at an atomistic level - Contains many supporting examples of materials in which such design concepts have been successfully applied
Download or read book Fracture Toughness Testing and Its Applications written by ASTM Committee E-24 Staff and published by ASTM International. This book was released on 1981-10 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Crack Growth Resistance Measurement in Polymeric Materials written by David Matthew Otterson and published by . This book was released on 1990 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cleavage Crack Growth Resistance Due to Plastic Flow Around a Near tip Dislocation free Region written by Viggo Tvergaard and published by . This book was released on 1996 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
