Download or read book Corrosion protection of prestressing steels written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1996-09-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Factory Applied Corrosion Protection of Prestressing Steel written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2001-01-01 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: Without doubt, active corrosion protection of prestressing steels by cement grout can be one of the most economic and durable solutions, if properly executed. Numerous other corrosion protection systems which fulfill requirements such as controllability and exchangeability are available. This state-of-the-art report, prepared by a task group and approved by fib Commission 9 Reinforcing and prestressing materials and systems, concentrates exclusively on factory applied corrosion protection that can be produced in controlled processes which should assure a better quality than corrosion protection applied on site. The report is addressed to designers and installers (executing persons) attempting to inform them about the various possibilities for industrially applied corrosion protection and to provide the necessary knowledge for their application.

Download or read book Corrosion protection of unbonded tendons written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1986-01-01 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unbonded tendons are popular in certain types of structure for reasons of economy and speed of construction. The FIP Commission on Pre-stressing Steels and Systems accordingly appointed an ad hoc committee to investigate available knowledge and experience and to instigate research if necessary.

Download or read book Influence of Material and Processing on Stress Corrosion Cracking of Prestressing Steel Case Studies written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2003 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report is a review of selected failures in concrete structures in which prestressing steels break in a brittle way due to stress corrosion cracking. Most cases are from the German experience over a period of about 30 years. Analysis of these failures shows that they are often due to an accumulation of causes such as poor design, errors during construction, careless detailing and, in some cases, use of unsuitable materials. This report will have achieved its purpose if it serves to avoid these past errors and encourages the development of new ways to protect, test and regulate prestressing steels. The report is complemented with comments on the properties and corrosion behaviour of different types of prestressing steels. The goal of the study is to provide objective arguments for the discussion of failures that have occurred due to corrosion induced failure of prestressing steel. In such a way the general regulation given in DIN with respect to reinforcement for robustness may eventually be proven inappropriate. The general building authority approval for prestressed hollow filler block floors already supports such an idea. It is well known that the hollow block floor industry works without any reinforcing steel. The regulations in the standards should not limit in particular the use of these types of prestressing steel (cold-formed wires, strands) which have proven not associated with any substantial failures cases reported in the last 35 years. The report reviews the historical development with respect to corrosion induced failure of prestressing steel. Concerning the circumstances of the failure examples, this review partly reflects a specific problem in Germany. Also reviewed are other known interregional examples of failure which are incorrectly attributed to the prestressed construction method. All cases considered are discussed and the failure reasons thoroughly evaluated, also with reference to the results of most recent research. Another question addressed is whether one should be concerned over corrosion induced retarded failure even when using new generation prestressing steel with correct corrosion protection. Finally a contribution to the following very important question is presented: Do the future prestressed structures possess enough safety against structural failure if they are constructed without reinforcement for robustness but otherwise comply completely with the design standards? To aid a better understanding of this short report on typical failure cases and their origins, the main conditions are set out for corrosion-induced failure of prestressing steel in technical applications. The properties of different types of prestressing steel and their application limits are given in a special section dealing with the influence of building materials on damage development. This report will be of interest to all involved in the construction process. Fundamental scientific discussion has been avoided by reference to well accredited detailed information in the technical literature.

Download or read book Corrosion and Corrosion Protection of Prestressed Ground Anchorages written by FIP Commission on Practical Construction. Working Group on Corrosion and Corrosion Protection of Prestressed Ground Anchorages and published by Thomas Telford. This book was released on 1986 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: This state of the art report summarizes the mechanisms and types of corrosion to which a ground anchorage based on a prestressing tendon can be subjected. The chemical, electrochemical and bacterial reactions between agressive soils and steel and concrete are dealt with in detail. There is a carefully recorded and analysed list of a number of known cases of tendon corrosion. A corrosion protection philosophy is proposed, with five classes of protection, with examples of such protection in current practice.

Download or read book Materials and systems for external prestressing written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1996-08-01 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Corrosion Protection of Prestressing Systems in Concrete Bridges written by William F. Perenchio and published by Transportation Research Board National Research. This book was released on 1989 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Acceptance of Stay Cable Systems Using Prestressing Steels written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2005-01-01 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fib Recommendation gives technical guidelines regarding design, testing, acceptance, installation, qualification, inspection and maintenance of stay cable systems using prestressing steels (strands, wires or bars) as tensile elements, which can be applied internationally. This Recommendation is applicable for cable-stayed bridges and other suspended structures such as roofs. It may also be used for hangers in arch structures and as suspension cables, as appropriate. This Recommendations has been formulated by an international working group comprising more than 20 experts from administrative authorities, universities, laboratories, owners, structural designers, suppliers of prestressing steels and stay cable suppliers. The text has been written to cover best construction practices around the world, and to provide material specifications that are considered to be the most advanced available at the time of preparing this text. For ease of use (for client, designer and cable supplier), the complex content has been arranged thematically according to the system components into chapters focusing on performance characteristics, requirements and acceptance criteria. Requirements and comments have been specified for all parties involved in design and construction in order to aim for a uniform and high quality and durability. The interfaces to the structural designer are highlighted. The essential subjects are: Design and detailing of stay cables including saddles and damping devices Durability requirements and corrosion protection systems Requirements for the materials Testing requirements for the stay cables Installation, tolerances, qualification of companies and personnel Inspection, maintenance and repair. This Recommendation does not cover the technology of stay cables whose tensile elements are ropes, locked-coil cables, etc. or which consist of composite materials. Nevertheless, in many cases the specified performance criteria may also be applicable to these systems, although numerical values given for the acceptance criteria may need to be adjusted. For these systems it has been difficult to provide multiple protective layers similar to those specified for stay cables made from prestressing steel and therefore, the quality of corrosion protection may not be equivalent. While extradosed cables have similarities with stay cables, generally agreed design and system acceptance criteria are not yet available and therefore, this type of cable is not covered.

Download or read book Report on Prestressing Steel written by Fédération internationale de la précontrainte. Commission on Prestressing Steels and Systems and published by . This book was released on 1980 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Building Code Requirements for Structural Concrete ACI 318 05 and Commentary ACI 318R 05 written by ACI Committee 318 and published by American Concrete Institute. This book was released on 2005 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Acceptance of cable systems using prestressing steels written by FIB – International Federation for Structural Concrete and published by FIB - Féd. Int. du Béton. This book was released on 2019-03-01 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cable-stayed structures have become increasingly popular over the last 30 years and have been used in all parts of the world. Modern cable-stayed bridges have a history of over 50-years and have been constructed with span lengths ranging from 15 m to over 1000 m. Many long span cable-stayed bridges have been built for railway and highway traffic applications. Stay cables have also been used on pedestrian structures, many of which are architecturally striking and have become landmark structures. There is growing use in building structures, particularly for cable-supported roofs. Most of the cable supported structures have been in the form of cable-stayed bridges; but in recent years, extradosed bridges have seen increased popularity among the designers. Led by the experience in Japan, more than 200 extradosed bridges have been constructed worldwide in the past 15 years. The first edition of these fib recommendations was published as fib Bulletin 30 in 2005 and was the first specification published by fib for stay cable systems. This new bulletin has been updated based on Bulletin 30 with the aim to reflect the current state of the art and encompass the latest knowledge in cable systems. In addition, it has been the aspiration of Commission 5 and Task Group 5.5 to harmonize the guidance in this updated bulletin with other stay cable recommendations from around the world, including those from Europe, Japan and the USA. This new bulletin is intended to supersede and replace fib Bulletin 30. It is recommended that it be used in lieu of fib Bulletin 30 for all future cable supported applications. The updated bulletin introduces several significant enhancements to the specifications: These recommendations are applicable to both stay cable and extradosed cable applications. In the past, there has been some debate over the boundary between cable-stayed and extradosed bridges. This bulletin presents a new continuous approach valid for both. A completely new testing requirement to assess the performance of cable systems under bending fatigue, including both anchorages and saddles, if applicable, has been added. Testing requirements for saddle systems have been reformulated. In addition to the bending fatigue test noted above, new testing procedures for stay cable saddles with isolated tensile elements are introduced. This includes tests for saddle axial fatigue, friction and tensile testing, and determination of the effective saddle friction coefficient. Expanded system qualification, including requirements for both stay cable and extradosed applications. Includes new provisions for MTE qualification and additional load transferring connection devices. Minimum number of tests is specified for each. A new in-situ damping measurement test has been added to verify the actual damping ratio of the damping devices installed. By testing on site, selected cables may be excited to vibrate without and with the damping devices so that the observed v vibration behaviour can be compared to the specified value. Other revisions have been made to reflect the current state of practice: Expanded quality control testing requirements Inclusion of epoxy-coated prestressing steel as a protection layer. Previous recommendations only considered zinc coatings. Specifications for epoxy coating material are given. Requirements for stainless steel components such as pipes, caps and plates Updated guidance for designing lightning protection systems Detailed recommendations for different levels of inspection of cable systems, including: initial, routine, detailed and exceptional inspections An updated list of references, relevant standards, and extended literature

Download or read book A Bibliography on the Corrosion and Protection of Steel in Concrete written by E. Escalante and published by . This book was released on 1979 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Report on prestressed steel 5 stress corrosion cracking resistance test for prestressed tendons written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1980-01-01 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Corrosion Protection of Reinforcing Steels written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2009-01-01 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has long been recognised that corrosion of steel is extremely costly and affects many industry sectors, including concrete construction. The cost of corrosion of steel reinforcement within concrete is estimated at many billions of dollars worldwide. The corrosion of steel reinforcement represents a deterioration of the steel which in turn detrimentally affects its performance and therefore that of the concrete element within which it has been cast. A great amount of work has been undertaken over the years concerning the prevention of corrosion of steel, including the application of coatings, which has included the study of the process of corrosion itself, the properties of reinforcing steels and their resistance to corrosion as well as the design of structures and the construction process. The objective of fib Bulletin 49 is to provide readers with an appreciation of the principles of corrosion of reinforcing steel embedded in concrete and to describe the behaviour of particular steels and their coatings as used to combat the effects of such corrosion. These include galvanised reinforcement, epoxy coated reinforcement, and stainless reinforcing steel. It also provides information on the relative costs of the materials and products which it covers. It does not deal with structure design or the process of construction or with the post-construction phase of structure management including repair. It is hoped that it will nevertheless increase the understanding of readers in the process of corrosion of reinforcing steels and the ability of key materials and processes to reduce its harmful effects.

Download or read book Corrosion of Steel in Concrete Structures written by Amir Poursaee and published by Woodhead Publishing. This book was released on 2023-02-20 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essential reading for researchers, practitioners, and engineers, this book covers not only all the important aspects in the field of corrosion of steel reinforced concrete but also discusses new topics and future trends. Theoretical concepts of corrosion of steel in concrete structures, the variety of reinforcing materials and concrete, including stainless steel and galvanized steel, measurements and evaluations, such as electrochemical techniques and acoustic emission, protection and maintenance methods, and modelling, latest developments, and future trends in the field are discussed. Comprehensive coverage of the corrosion of steel bars in concrete, investigating the range of reinforcing materials, and types of concrete Introduces the latest measuring methods, data collection, and advanced modeling techniques Second edition covers a range of new, emerging topics such as the concept of chloride threshold value, concrete permeability and chloride diffusion, the role of steel microstructure, and innovations in corrosion detection devices

Download or read book Effect of zinc on prestressing steel written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2012-06-01 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concerns have been raised regarding the durability of galvanized prestressing steels in contact with cementitious grout, and regarding the use of galvanized ducts for grouted tendons or galvanized inserts or components in contact with prestressing steel inside concrete. These concerns are mainly based on the assumption that the hydrogen formed on the zinc surface when exposed to the fresh cementitious grout for a short period of time represents a risk of hydrogen induced stress corrosion for the prestressing steel. Basic research has demonstrated that hydrogen induced stress corrosion may indeed occur with prestressing steels which are sensitive to hydrogen induced stress corrosion. The use of galvanizing for high strength steels exposed to atmosphere is less controversial. However, under certain conditions hydrogen may develop also and potentially damage the high strength steel. This report provides a summary and evaluation of the relevant parameters on the corrosion behaviour of high strength wires, strands and bars when in contact with zinc with and without the presence of fresh cementitious grout or concrete. Both, tendons made of prestressing steels used in structural concrete and cables under atmospheric conditions are considered. The main groups of applications discussed in the report are: A Zinc-coated high strength steel for applications in atmospheric corrosion conditions B Zinc-coated prestressing steel embedded in fresh cementitious grout or concrete C Bare prestressing steel (no zinc coating) embedded in fresh cementitious grout or concrete in direct contact with, or indirect contact in the immediate vicinity of galvanized components embedded in the grout or concrete (e.g. galvanized ducts, galvanized reinforcing steel, galvanized fastenings / dowels, etc).

Download or read book Maintenance of prestressed concrete structures written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1978-01-01 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: