Download or read book Copper and Copper Alloys Determination of Main Constituents and Impurities by Wavelength Dispersive X Ray Fluorescence Spectrometry XRF Routine Method written by British Standards Institute Staff and published by . This book was released on 2006-11-30 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: Copper, Test specimens, Impurities, Calibration, Fluorimetry, Chemical analysis and testing, Determination of content, X-ray fluorescence spectrometry, Non-ferrous alloys, Copper alloys, Test equipment
Download or read book Copper and Copper Alloys Determination of Main Constituents and Impurities by Wavelength Dispersive X Ray Fluorescence Spectrometry XRF Guidelines to the Routine Method written by British Standards Institute Staff and published by . This book was released on 2006-11-30 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: Copper, Copper alloys, Non-ferrous alloys, Chemical analysis and testing, Determination of content, Impurities, X-ray fluorescence spectrometry, Fluorimetry, Test equipment, Calibration, Control samples, Test specimens, Performance
Download or read book Ullmann s Encyclopedia of Industrial Chemistry written by and published by . This book was released on 2003 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handheld XRF in Cultural Heritage written by Aniko Bezur and published by . This book was released on 2019-05-15 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Copper and Bronze in Art written by David A. Scott and published by Getty Publications. This book was released on 2002 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a review of 190 years of literature on copper and its alloys. It integrates information on pigments, corrosion and minerals, and discusses environmental conditions, conservation methods, ancient and historical technologies.
Download or read book Methods for Geochemical Analysis written by Philip A. Baedecker and published by . This book was released on 1987 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analytical methods used in the Geologic Division laboratories of the U.S. Geological Survey for the inorganic chemical analysis of rock and mineral samples.
Download or read book Handbook of X Ray Spectrometry written by Rene Van Grieken and published by CRC Press. This book was released on 2001-11-27 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Updates fundamentals and applications of all modes of x-ray spectrometry, including total reflection and polarized beam x-ray fluorescence analysis, and synchrotron radiation induced x-ray emission. Promotes the accurate measurement of samples while reducing the scattered background in the x-ray spectrum."
Download or read book Handbook of Practical X Ray Fluorescence Analysis written by Burkhard Beckhoff and published by Springer Science & Business Media. This book was released on 2007-05-18 with total page 897 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-Ray fluorescence analysis is an established technique for non-destructive elemental materials analysis. This book gives a user-oriented practical guidance to the application of this method. The book gives a survey of the theoretical fundamentals, analytical instrumentation, software for data processing, various excitation regimes including gracing incidents and microfocus measurements, quantitative analysis, applications in routine and micro analysis, mineralogy, biology, medicine, criminal investigations, archeology, metallurgy, abrasion, microelectronics, environmental air and water analysis. This book is the bible of X-Ray fluorescence analysis. It gives the basic knowledge on this technique, information on analytical equipment and guides the reader to the various applications. It appeals to researchers, analytically active engineers and advanced students.
Download or read book Energy Dispersive X ray Fluorescence Analysis written by Bohdan Dziunikowski and published by . This book was released on 1989 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book X rays for Archaeology written by M. Uda and published by Springer Science & Business Media. This book was released on 2005-08-10 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of X-rays to objects of archaeology and insights into construction and chemical composition in a non-destructive manner date back to the discovery of radiation. This book contains measurement data taken with portable XRF and XRD, and data taken with accelerating ion beams and synchrotron radiations, and with their explanation.
Download or read book Principles and Practice of X Ray Spectrometric Analysis written by E.P. Bertin and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first edition of this book was published early in 1970, three major developments have occurred in the field of x-ray spectrochemical analysis. First, wavelength-dispersive spectrometry, in 1970 already securely established among instrumental analytical methods, has matured. Highly sophisticated, miniaturized, modular, solid-state circuitry has replaced elec tron-tube circuitry in the readout system. Computers are now widely used to program and control fully automated spectrometers and to store, process, and compute analytical concentrations directly and immediately from ac cumulated count data. Matrix effects have largely yielded to mathematical treatment. The problems associated with the ultralong-wavelength region have been largely surmounted. Indirect (association) methods have extended the applicability of x-ray spectrometry to the entire periodic table and even to certain classes of compounds. Modern commercial, computerized, auto matic, simultaneous x-ray spectrometers can index up to 60 specimens in turn into the measurement position and for each collect count data for up to 30 elements and read out the analytical results in 1--4 min-all corrected for absorption-enhancement and particle-size or surface-texture effects and wholly unattended. Sample preparation has long been the time-limiting step in x-ray spectrochemical analysis. Second, energy-dispersive spectrometry, in 1970 only beginning to assume its place among instrumental analytical methods, has undergone phenomenal development and application and, some believe, may supplant wavelength spectrometry for most applications in the foreseeable future.
Download or read book An Introduction to Surface Analysis by XPS and AES written by John F. Watts and published by John Wiley & Sons. This book was released on 2019-08-27 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a concise yet comprehensive introduction to XPS and AES techniques in surface analysis This accessible second edition of the bestselling book, An Introduction to Surface Analysis by XPS and AES, 2nd Edition explores the basic principles and applications of X-ray Photoelectron Spectroscopy (XPS) and Auger Electron Spectroscopy (AES) techniques. It starts with an examination of the basic concepts of electron spectroscopy and electron spectrometer design, followed by a qualitative and quantitative interpretation of the electron spectrum. Chapters examine recent innovations in instrument design and key applications in metallurgy, biomaterials, and electronics. Practical and concise, it includes compositional depth profiling; multi-technique analysis; and everything about samples—including their handling, preparation, stability, and more. Topics discussed in more depth include peak fitting, energy loss background analysis, multi-technique analysis, and multi-technique profiling. The book finishes with chapters on applications of electron spectroscopy in materials science and the comparison of XPS and AES with other analytical techniques. Extensively revised and updated with new material on NAPXPS, twin anode monochromators, gas cluster ion sources, valence band spectra, hydrogen detection, and quantification Explores key spectroscopic techniques in surface analysis Provides descriptions of latest instruments and techniques Includes a detailed glossary of key surface analysis terms Features an extensive bibliography of key references and additional reading Uses a non-theoretical style to appeal to industrial surface analysis sectors An Introduction to Surface Analysis by XPS and AES, 2nd Edition is an excellent introductory text for undergraduates, first-year postgraduates, and industrial users of XPS and AES.
Download or read book Quantitative X Ray Spectrometry Second Edition written by Ron Jenkins and published by CRC Press. This book was released on 1995-04-26 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work covers important aspects of X-ray spectrometry, from basic principles to the selection of instrument parameters and sample preparation. This edition explicates the use of combined X-ray fluorescence and X-ray diffraction data, and features new applications in environmental studies, forensic science, archeometry and the analysis of metals and alloys, minerals and ore, ceramic materials, catalysts and trace metals.;This work is intended for spectroscopists, analytical chemists, materials scientists, experimental physicists, mineralogists, biologists, geologists and graduate-level students in these disciplines.
Download or read book A Study of Fluorescent Excitation Using Isotopic X ray Emission written by Troy C. Martin and published by . This book was released on 1965 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Remote Compositional Analysis written by Janice L. Bishop and published by Cambridge University Press. This book was released on 2019-11-28 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive overview of the spectroscopic, mineralogical, and geochemical techniques used in planetary remote sensing.
Download or read book Chemical and Process Technology Encyclopedia written by Douglas M. Considine and published by McGraw-Hill Companies. This book was released on 1974 with total page 1294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brings together in a single volume the many facets of inorganic, organic and physical chemistry, and of chemical, metallurgical and process engineering.
Download or read book Surface and Thin Film Analysis written by Gernot Friedbacher and published by Wiley-VCH. This book was released on 2011-06-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surveying and comparing all techniques relevant for practical applications in surface and thin film analysis, this second edition of a bestseller is a vital guide to this hot topic in nano- and surface technology. This new book has been revised and updated and is divided into four parts - electron, ion, and photon detection, as well as scanning probe microscopy. New chapters have been added to cover such techniques as SNOM, FIM, atom probe (AP),and sum frequency generation (SFG). Appendices with a summary and comparison of techniques and a list of equipment suppliers make this book a rapid reference for materials scientists, analytical chemists, and those working in the biotechnological industry. From a Review of the First Edition (edited by Bubert and Jenett) "... a useful resource..." (Journal of the American Chemical Society)
