Download or read book Controlled Atmosphere Transmission Electron Microscopy written by Thomas Willum Hansen and published by Springer. This book was released on 2015-10-23 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book illustrates the practical workings of environmental transmission electron microscopy (ETEM) from history and instrument design through to solving practical problems. Aspects of instrument design, performance, and operating procedures are covered, together with common problems and pitfalls of the technique. Not only will a properly operated instrument and a carefully set up experiment provide new insight into your specimen, but the ability to observe the specimen in its natural habitat will be essential to meeting specific design criteria for the development of the next generation of materials. Over the past five decades, transmission electron microscopy (TEM) under environmental conditions relevant to a particular sample has been of increasing interest. Symposia dealing with the topic are now among the best attended at international microscopy conferences. Since typical operating modes for the ETEM require the sample be subjected to a harsh environment consisting of corrosive gases and high temperatures, the challenges of adapting and operating the instrument for observation under dynamic operating conditions are numerous. However, careful consideration of the interaction of the electrons with the gases and sample, as well as the gases with the microscope components, can lead to highly rewarding results. In Controlled Atmosphere Transmission Electron Microscopy, leading experts help you to perform successful experiments using the ETEM, and to interpret and understand the results.
Download or read book Controlled atmosphere electron microscopy written by R. T. K. Baker and published by . This book was released on 1971 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Compendium of Surface and Interface Analysis written by The Surface Science Society of Japan and published by Springer. This book was released on 2018-02-19 with total page 807 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book concisely illustrates the techniques of major surface analysis and their applications to a few key examples. Surfaces play crucial roles in various interfacial processes, and their electronic/geometric structures rule the physical/chemical properties. In the last several decades, various techniques for surface analysis have been developed in conjunction with advances in optics, electronics, and quantum beams. This book provides a useful resource for a wide range of scientists and engineers from students to professionals in understanding the main points of each technique, such as principles, capabilities and requirements, at a glance. It is a contemporary encyclopedia for selecting the appropriate method depending on the reader's purpose.
Download or read book Heterogeneous Catalysts written by Wey Yang Teoh and published by John Wiley & Sons. This book was released on 2021-02-23 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents state-of-the-art knowledge of heterogeneous catalysts including new applications in energy and environmental fields This book focuses on emerging techniques in heterogeneous catalysis, from new methodology for catalysts design and synthesis, surface studies and operando spectroscopies, ab initio techniques, to critical catalytic systems as relevant to energy and the environment. It provides the vision of addressing the foreseeable knowledge gap unfilled by classical knowledge in the field. Heterogeneous Catalysts: Advanced Design, Characterization and Applications begins with an overview on the evolution in catalysts synthesis and introduces readers to facets engineering on catalysts; electrochemical synthesis of nanostructured catalytic thin films; and bandgap engineering of semiconductor photocatalysts. Next, it examines how we are gaining a more precise understanding of catalytic events and materials under working conditions. It covers bridging pressure gap in surface catalytic studies; tomography in catalysts design; and resolving catalyst performance at nanoscale via fluorescence microscopy. Quantum approaches to predicting molecular reactions on catalytic surfaces follows that, along with chapters on Density Functional Theory in heterogeneous catalysis; first principles simulation of electrified interfaces in electrochemistry; and high-throughput computational design of novel catalytic materials. The book also discusses embracing the energy and environmental challenges of the 21st century through heterogeneous catalysis and much more. Presents recent developments in heterogeneous catalysis with emphasis on new fundamentals and emerging techniques Offers a comprehensive look at the important aspects of heterogeneous catalysis Provides an applications-oriented, bottoms-up approach to a high-interest subject that plays a vital role in industry and is widely applied in areas related to energy and environment Heterogeneous Catalysts: Advanced Design, Characterization and Applications is an important book for catalytic chemists, materials scientists, surface chemists, physical chemists, inorganic chemists, chemical engineers, and other professionals working in the chemical industry.
Download or read book Transmission Electron Microscopy written by C. Barry Carter and published by Springer. This book was released on 2016-08-24 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is a companion volume to Transmission Electron Microscopy: A Textbook for Materials Science by Williams and Carter. The aim is to extend the discussion of certain topics that are either rapidly changing at this time or that would benefit from more detailed discussion than space allowed in the primary text. World-renowned researchers have contributed chapters in their area of expertise, and the editors have carefully prepared these chapters to provide a uniform tone and treatment for this exciting material. The book features an unparalleled collection of color figures showcasing the quality and variety of chemical data that can be obtained from today’s instruments, as well as key pitfalls to avoid. As with the previous TEM text, each chapter contains two sets of questions, one for self assessment and a second more suitable for homework assignments. Throughout the book, the style follows that of Williams & Carter even when the subject matter becomes challenging—the aim is always to make the topic understandable by first-year graduate students and others who are working in the field of Materials Science Topics covered include sources, in-situ experiments, electron diffraction, Digital Micrograph, waves and holography, focal-series reconstruction and direct methods, STEM and tomography, energy-filtered TEM (EFTEM) imaging, and spectrum imaging. The range and depth of material makes this companion volume essential reading for the budding microscopist and a key reference for practicing researchers using these and related techniques.
Download or read book Liquid Cell Electron Microscopy written by Frances M. Ross and published by Cambridge University Press. This book was released on 2017 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2.6.2 Electrodes for Electrochemistry
Download or read book In Situ Transmission Electron Microscopy written by Litao Sun and published by Springer Nature. This book was released on 2023-03-11 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on in-situ transmission electron microscopy (TEM), an investigatory technique used to observe a sample’s response to a given stimulus (including electron irradiation, thermal excitation, mechanical force, optical excitation, electric and magnetic fields) at the nanoscale in real time. The book introduces readers to the technical strategy behind the in-situ technique and its developments. It reviews the research frontiers of using in-situ TEM in energy conversion and storage, catalysis, nanomaterials synthesis, nanoelectronics, etc. Furthermore, it discusses the future prospects for in-situ TEM. The book offers a valuable guide for all undergraduate and graduate students who are interested in TEM characterization technology. It also serves as a reference source on cutting-edge in-situ techniques for researchers and engineers.
Download or read book The Chemical Applications of Transmission Electron Microscopy written by J. R. Fryer and published by . This book was released on 1979 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microscopy and Analysis written by Stefan G. Stanciu and published by BoD – Books on Demand. This book was released on 2016-09-21 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microscopes represent tools of the utmost importance for a wide range of disciplines. Without them, it would have been impossible to stand where we stand today in terms of understanding the structure and functions of organelles and cells, tissue composition and metabolism, or the causes behind various pathologies and their progression. Our knowledge on basic and advanced materials is also intimately intertwined to the realm of microscopy, and progress in key fields of micro- and nanotechnologies critically depends on high-resolution imaging systems. This volume includes a series of chapters that address highly significant scientific subjects from diverse areas of microscopy and analysis. Authoritative voices in their fields present in this volume their work or review recent trends, concepts, and applications, in a manner that is accessible to a broad readership audience from both within and outside their specialist area.
Download or read book Electron Diffraction in the Transmission Electron Microscope written by P.E. Champness and published by Garland Science. This book was released on 2020-08-13 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a practical guide to electron diffraction in the transmission electron microscope (TEM). Case studies and examples are used to provide an invaluable introduction to the subject for those new to the technique. The book explains the basic methods used to obtain diffraction patterns with the TEM. The numerous illustrations aid the understanding of the conclusions reached.
Download or read book Specimen Preparation for Transmission Electron Microscopy of Materials written by PJ Goodhew and published by Garland Science. This book was released on 2020-11-25 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: Details the essential practical steps which must precede microscopy. Methods for preparing sheet or disc specimens and final thinning techniques are described with reference to practical problems. The book also covers methods for mounting specimens in the
Download or read book Transmission Electron Microscopy written by David B. Williams and published by . This book was released on 2014-01-15 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book In Situ Transmission Electron Microscopy Experiments written by Renu Sharma and published by John Wiley & Sons. This book was released on 2023-05-10 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: In-Situ Transmission Electron Microscopy Experiments Design and execute cutting-edge experiments with transmission electron microscopy using this essential guide In-situ microscopy is a recently-discovered and rapidly-developing approach to transmission electron microscopy (TEM) that allows for the study of atomic and/or molecular changes and processes while they are in progress. Experimental specimens are subjected to stimuli that replicate near real-world conditions and their effects are observed at a previously unprecedented scale. Though in-situ microscopy is becoming an increasingly important approach to TEM, there are no current texts combining an up-to-date overview of this cutting-edge set of techniques with the experience of in-situ TEM professionals. In-Situ Transmission Electron Microscopy Experiments meets this need with a work that synthesizes the collective experience of myriad collaborators. It constitutes a comprehensive guide for planning and performing in-situ TEM measurements, incorporating both fundamental principles and novel techniques. Its combination of technical detail and practical how-to advice makes it an indispensable introduction to this area of research. In-Situ Transmission Electron Microscopy Experiments readers will also find: Coverage of the entire experimental process, from method selection to experiment design to measurement and data analysis Detailed treatment of multimodal and correlative microscopy, data processing and machine learning, and more Discussion of future challenges and opportunities facing this field of research In-Situ Transmission Electron Microscopy Experiments is essential for graduate students, post-doctoral fellows, and early career researchers entering the field of in-situ TEM.
Download or read book Transmission Electron Microscopy of Materials written by and published by . This book was released on 1981 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Molecular Soft Interface Science written by Mizuo Maeda and published by Springer. This book was released on 2019-05-09 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive treatment of the molecular design, characterization, and physical chemistry of soft interfaces. At the same time, the book aims to encourage the fabrication of functional materials including biomaterials. During the past few decades there has been steady growth in soft-interface science, and that growth has been especially rapid in the twenty-first century. The field is interdisciplinary because it involves chemistry, polymer science, materials science, physical chemistry, and biology. Based on the increasing interdisciplinary nature of undergraduate and graduate programs, the primary goal of this present work is to serve as a comprehensive resource for senior-level undergraduates and for graduate students, particularly in polymer chemistry, materials science, bioconjugate chemistry, bioengineering, and biomaterials. Additionally, with the growing interest in the fabrication of functional soft materials, this book provides essential fundamental information for researchers not only in academia but also in industry.
Download or read book In situ Electron Microscopy written by Gerhard Dehm and published by John Wiley & Sons. This book was released on 2012-05-29 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Von den Grundlagen über das Experiment bis zur Anwendung zeigt dieses Buch, wie sich Ionenstrahlanlagen, Rasterelektronenmikroskope und Transmissionselektronenmikroskope zur Beobachtung von Phänomenen bis hinunter zum Nanomaßstab in Echtzeit einsetzen lassen. Nach einem theoretischen Überblick werden experimentelle Verfahren zur Untersuchung von Aufwachsprozessen, Schmelzen, chemischen Reaktionen und Dotierung besprochen; außerdem geht es um die Messung mechanischer, magnetischer, optischer und elektronischer Kenndaten. Der letzte Abschnitt widmet sich Fragen der Soft-Matter-Charakterisierung.
Download or read book Catalytic Air Pollution Control written by Ronald M. Heck and published by John Wiley & Sons. This book was released on 2016-03-07 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalytic Air Pollution Control: Commercial Technology is the primary source for commercial catalytic air pollution control technology, offering engineers a comprehensive account of all modern catalytic technology. This Third Edition covers all the new advances in technology in automotive catalyst control technology, diesel engine catalyst control technology, small engine catalyst control technology, and alternate sustainable fuels for auto and diesel.
